Geometric and electronic structure of an N,N′-ethylene-bis(salicylaldiminato) zinc(II) molecule,ZnO<Subscript>2</Subscript>N<Subscript>2</Subscript>C<Subscript>16</Subscript>H<Subscript>14</Subscript>

Gas electron diffraction at a temperature T of 641(5) K is used to study the structure of an N,N′-ethylenebis(salicylaldiminato) zinc(II) molecule, ZnO₂N₂C₁₆H₁₄, further Zn(salen). The structure of a gaseous Zn(salen) complex has C ₂ symmetry and is characterized by a substantial turn of two chelating fragments of the ligand with respect to each other, and also by a big difference in the length of coordination bonds: r _h1(Zn-O)=1.902(7) Å r _h1(Zn-N)= 2.027(7) Å. Results of the DFT/B3LYP calculation with 6-31G* and CEP,TZV basis sets of the molecule structure well agree with the experimental data. The electronic structure of Ni(salen), Cu(salen), Zn(salen), and Zn(acacen) molecules is considered.     

A molecular dynamics simulation of H<Subscript>3</Subscript>PO<Subscript>4</Subscript>, H<Subscript>2</Subscript>PO<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack>, and the protonated form of N,N-dimethylformamide in liquid N,N-dimethylformamide

The molecular dynamics simulation method was for the first time used to study the structural and energy parameters of H₃PO₄, H₂PO₄⁻, and (DMFA)H⁺ (protonated dimethylformamide) in liquid N,N-dimethylformamide. The predominant orientation of the nearest neighbors of H₃PO₄, H₂PO₄⁻, DMFA, and (DMFA)H⁺ was determined from ranked distribution functions. The most probable structure of H-bonded complexes was obtained. It was shown that H₃PO₄ formed H-bonds with two DMFA molecules, and and (DMFA)H⁺ formed H-bonds with one molecule. The dependence of Coulomb interaction energies on the distance between H₃PO₄, H₂PO₄⁻, (DMFA)H⁺, and DMFA had the form of damped oscillations, as is characteristic of intermolecular interactions in pure DMFA. The molecular dynamics simulation of the H₂PO₄⁻-(DMFA)H⁺-DMFA ternary system showed a high probability of the formation of contact ion pairs.     

Structure of a zinc(II) N,N’-ethylene-bis (acetylacetoniminate) molecule,ZnO<Subscript>2</Subscript>N<Subscript>2</Subscript>C<Subscript>12</Subscript>H<Subscript>18</Subscript>, according to gas electron diffraction data and quantum chemical calculations

Gas electron diffraction is used to study the structure of a zinc(II) N,N’-ethylene-bis(acetylacetoniminate) molecule, ZnO₂N₂C₁₂H₁₈, at a temperature T = 503(5) K. It is found that the molecule has the symmetry of the C₂ equilibrium configuration with a nonplanar structure of the ZnN₂O₂ coordination fragment and internuclear distances r_h1(Zn-O) of 1.958(13) ? and _h1(Zn-N) of 2.012(16) ?. Quantum chemical calculations by the DFT/B3LYP/CEP,TZV method gives the molecular structure consistent with that found in the experiment.     

Synthesis,morphology, and activity of La<Subscript>1–x</Subscript>Ag<Subscript>x</Subscript>MnO<Subscript>3 ± y</Subscript> catalysts

La_1–xAg_xMnO_{3 ± y} (x = 0-0.3) mixed oxides have been synthesized by the pyrolysis of polymer–salt compositions using different organic compounds and different salt: organic compound ratios. The correlation between the reaction medium temperature during pyrolysis, the composition of the resulting oxide, and synthesis conditions has been investigated. The effect of these conditions on the character of the pyrolysis process, on the phase composition and microstructure of the resulting oxide particles and metallic silver, and on their mutual distribution is reported. The catalytic properties of the synthesized oxides in methane and soot oxidation are considered, and a correlation is established between the catalytic activity of the oxides and the synthesis conditions.     

Phase equilibria,charge transport,and mass transport in Sr<Subscript>4</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript>-“M<Subscript>4</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript>” (M = Cd,Cu, Ni,and Zn) systems

Homogeneous fields of Sr_{4 − x} M _x Nb₂O₉ (M = Cd, Cu, Ni, or Zn) solid solutions were determined using powder X-ray diffraction. Phase fields were plotted proceeding from the tolerance factor t and electronegativity ratio $ \bar k_A /\bar k_B $ \bar k_A /\bar k_B with a satisfactory fit of experimental results. Thermogravimetry was used to establish the major kinetic laws of solid-phase synthesis (conversion, rate-controlling stage, and effective activation energy) in (4 − x)SrCO₃ + xMO + Nb₂O₅ powdery mixtures. Direct radiometry was used to determine ⁹⁰Sr, ⁶³Ni, and ⁶⁵Zn self-diffusion coefficients in solid solutions based on the Sr₄Nb₂O₉ phase. Electrical conductivity was measured as a function of temperature for all Sr₄Nb₂O₉-“M₄Nb₂O₉” samples. The conductivity of Sr_{4 − x} M _x Nb₂O₉ (M = Cd, Cu, Ni, or Zn) solid solutions has a mixed ion-electron character.     

Synthesis and physicochemical study of M<Subscript>4</Subscript>Na<Subscript>2</Subscript>V<Subscript>10</Subscript>O<Subscript>28</Subscript> · 10H<Subscript>2</Subscript>O (M=K,Rb, NH<Subscript>4</Subscript>)

The formation conditions and physicochemical properties of binary decavanadates M₄Na₂V₁₀O₂₈ · 10H₂O (M=K, Rb, NH₄), synthesized by crystallization from saturated solutions of the NaVO₃-MH₂AsO₄-H₂O systems, were studied by chemical analysis, X-ray powder diffraction, microscopy, thermogravimetry, and IR spectroscopy. To optimize the synthesis conditions of M₄Na₂V₁₀O₂₈ · 10H₂O, the ( 1-x)NaVO₃ · 2H₂O · xMH2AsO4-H₂O (0.2 ≤ x ≤ 0.8) isomolar series method was applied to studying the interaction in the NaVO₃-MH₂AsO₄-H₂O systems (M = K, Rb, Cs) at the 0.4 mol/L total molar concentration of NaVO₃ and MH₂AsO₄ in solutions. The studied M₄Na₂V₁₀O₂₈ · 10H₂O compounds were shown to be isostructural with triclinic crystals (Z= 1, space group P $ \bar 1 $ \bar 1 ), and their unit cell parameters were estimated.     

Solid solutions (Ru,Nb)Sr<Subscript>2</Subscript>(Sm<Subscript>1.4</Subscript>Ce<Subscript>0.6</Subscript>)Cu<Subscript>2</Subscript>O<Subscript>10−δ</Subscript>: Synthesis,structure, and properties

Solid solutions of as-batch composition (Ru_1?x Nb _x )Sr₂(Sm_1.4Ce_0.6)Cu₂O_10?δ (the Ru,Nb)-1222 phase), where x = 0.0, 0.25, 0.50, 0.75, or 1.00, have been synthesized and characterized by X-ray diffraction. A correlation is proposed between the refined composition of the Ru-1222 and Nb-1222 phases and their structural features. With increasing oxygen concentration in the Ru-1222 phase, the superconducting transition temperature increases from T _c = 28 to T _c = 34 K. The composition and magnetic properties of the Ru-1222 phase are affected by the batch composition: unlike in Ru + RuO₂ mixtures, the presence of ruthenium in the batch decreases the oxygen proportion and increases the magnetic ordering temperature T _m; the phase of as-batch composition NbSr₂(Sm_1.4Ce_0.6)Cu₂O_10?δ is paramagnetic.     

Synthesis,microstructure, and electric properties of CaZr<Subscript>0.9</Subscript>Y<Subscript>0.1</Subscript>O<Subscript>3 – δ</Subscript> films obtained on porous SrTi<Subscript>0.8</Subscript>Fe<Subscript>0.2</Subscript>O<Subscript>3 – δ</Subscript> supports

Compact CaZr_0.9Y_0.1O_3–δ (CZY) film on a porous SrTi_0.8Fe_0.2O_3–δ (STF) support is obtained using the technique of deposition from solutions of inorganic salts in ethanol. According to the data of scanning electron microscopy (SEM), the film has a nanoporous granular structure with the grain size of 0.2 to 1 μm. The thickness of the CZY film on the STF support is about 3 μm after 15-fold solution application. The results of studying the elemental composition showed that elements of the support diffuse into the film in the course of synthesis. Analysis of the data of impedance spectroscopy shows that conductivity of the CZY film is limited the grain bulk. It is assumed that the comparatively low conductivity activation energy of the film (50.3 kJ/mol) is due to diffusion of elements of the STF support that results in variation of the film composition and properties.     

Synthesis,characterization, and X-ray crystal structure of the manganese(III) complex Mn(Sal<Subscript>2</Subscript>hn)(CH<Subscript>3</Subscript>OH)(N<Subscript>3</Subscript>) [Sal<Subscript>2</Subscript>hn = N,N′-bis(salicylidene)-1,2-hexanediamine]

The new manganese(III) complex, Mn(Sal₂hn)(CH₃OH)(N₃), where Sal₂hn = N,N′-bis(salicylidene)-1,2-hexanediamine, was prepared from a reaction mixture containing Sal₂hn, MnCl₂ · 2H₂O, and NaN₃ (2: 1: 8 molar ratio) in methanol and characterized using elemental analysis, FT-IR spectroscopy, and X-ray single-crystal diffraction. In the title complex, the Mn(III) center is in a distorted octahedral coordination geometry with the basal plane formed by the N₂O₂ donors of the tetradentate Schiff base dianion; the two phenolate O atoms and the two imine N atoms are each mutually in the cis position. The azide ion and the O atom of the methanol molecule occupy the other two positions of the octahedron. The hydrogen bond O(3)-H(3O)⋯N(5) links the mononuclear Mn(Sal₂hn)(CH₃OH)(N₃) units into a 1D chain extended along the x axis. The crystal structure is further stabilized by C(7)-H(7)⋯N(3) and C(16)-H(16)⋯N(5) hydrogen bonds.     

Stable tetrahedron LiF–KI–K<Subscript>2</Subscript>CrO<Subscript>4</Subscript>–Li<Subscript>2</Subscript>CrO<Subscript>4</Subscript> of the quaternary reciprocal system Li,K||F,I, CrO<Subscript>4</Subscript>

The stable tetrahedron LiF–KI–K₂CrO₄–Li₂CrO₄ of the quaternary reciprocal system Li, K||F, I, CrO₄ was experimentally studied by differential thermal analysis. The compositions and melting points of mixtures of components at two eutectic points were determined. Based on experimental data, a T–x–y–z model of the phase complex was constructed, which allows one to solve problems of building polythermal and isothermal sections. A method for constructing the diagram of material balance of equilibrium phases for a given composition was developed. The diagram enables one to find the ratio between the amounts of the liquid and solid phases at constant temperature and also monitor the change in the composition of the phases within a chosen temperature range.     

Crystal structure,infrared and raman spectra of tripotassium trisaccha-rinate dihydrate,K<Subscript>3</Subscript>(C<Subscript>7</Subscript>H<Subscript>4</Subscript>NO<Subscript>3</Subscript>S)<Subscript>3</Subscript>·2H<Subscript>2</Subscript>O

The crystal structure of tripotassium trisaccharinate dihydrate, K₃(C₇H₄NO₃S)₃·2H₂O, is triclic, space group\(P \bar 1, Z = 2\). It consists of three crystallographically independent potassium and saccharinato ions as well as two structurally different water molecules. Potassium coordination polyhedra are irregular, with K1 and K3 six-coordinated and the third one K2 seven-coordinated. The K?O distances range from 2.652(9) to 3.100(2) Å(mean: 2.790 Å) whereas the K?N distance is 3.025(3) Å. The water molecules W2 is disordered over three positions with occupancies of approximately 0.6, 0.2 and 0.2. The hydrogen atom (H1W1) of the ordered water molecule (O1W) is hydrogen bonded to the sulfonyl oxygen atom (O11) (R(O...O)=2.976(3) Å), whereas the other hydrogen atom (H2W1) is bifurcated to the carbonyl oxygen atom (O13) (R(O...O)=2.851(3) Å) and the disordered water molecules (O23W) (R(O...O)=3.067(12) Å). The carbonyl oxygens (O13, O23 and O33) and one of the disordered water molecules (O22W) are involved in C?H...O hydrogen bonds (R(C?H...O)=3.027(4)–3.304(9) Å). Structural characteristics of the studied compound are compared with the analogous trisodium trisaccharinate dihydrate and dipotassium sodium trisaccharinate monohydrate. Infrared and Raman spectra of the title compound have been analyzed in relation to the structure, and compared with the spectra of trisodium trisaccharinate dihydrate.     

Sol–Gel Synthesis of Na<Subscript>2</Subscript>O-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> Glasses and their Characterization by NMR,SNMS, and AFM

Sodium aluminophosphate samples with composition 43.8Na₂O12.5Al₂O₃43.8P₂O₅ were prepared by the sol–gel route using different precursors and working in different pH ranges from pH < 1 up to pH > 10. The structures of the gels and of the corresponding glasses were investigated by solid state NMR and compared to that of a glass with the same composition prepared by a traditional melting process. In addition to bulk materials, thin films were deposited by dip coating on silica glasses. Applying secondary neutral mass spectrometry (SNMS), the expected elements and residual carbon were identified. The surfaces of the coatings and fracture surfaces of bulk material were investigated using atomic force microscopy (AFM). Solid state NMR revealed that samples prepared via a lactate route exhibited local Al and P environments closest to that of the melt-prepared glass, with the highest extent of Al-O-P connectivity.     

Theoretical analysis of the system Li,K, Ca,Ba||F,WO<Subscript>4</Subscript>: Physicochemical properties of the system LiF–K<Subscript>2</Subscript>WO<Subscript>4</Subscript>–BaF<Subscript>2</Subscript>–CaF<Subscript>2</Subscript>–BaWO<Subscript>4</Subscript>

The differentiation of the quaternary reciprocal system Li, K, Ca, Ba||F, WO₄ was performed based on the graph theory using special software. Stable and metastable complexes of the system were found using a matrix of reciprocal pairs of salts. For the first time, by a set of physicochemical analysis methods (differential thermal, visual polythermal, and X-ray powder diffraction analyses), based on the method of thermal analysis of successive projections of the composition polytope, the quaternary system LiF–K₂WO₄–CaF₂–BaF₂–BaWO₄, which is a stable complex of the quaternary reciprocal system Li, K, Ca, Ba||F, WO₄, was studied and the coordinates of invariant points were determined.     

Cutting Tetrahedron LiVO<Subscript>3</Subscript>–KBr–KVO<Subscript>3</Subscript>–LiKMoO<Subscript>4</Subscript> of the Quinary Reciprocal System Li,K||F,Br, VO<Subscript>3</Subscript>, MoO<Subscript>4</Subscript>

The cutting tetrahedron LiVO₃–KBr–KVO₃–LiKMoO₄ of the quinary reciprocal system Li, K||F, Br, VO₃, MoO₄ was studied by differential thermal analysis. The composition and melting point of the alloy corresponding to a quaternary eutectic were determined (11.3 mol % LiVO₃, 18.0 mol % KBr, 57.0 mol % KVO₃, 13.7 mol % Li₂MoO₄ + K₂MoO₄, 318°С).     

Concentration Space of Homogeneous Garnet in the System Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–(Y,Bi)<Subscript>3</Subscript>(Fe,Ga)<Subscript>5</Subscript>O<Subscript>12</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

The concentration space of homogeneous garnet in the system Ga₂O₃–(Y, Bi)₃(Fe, Ga)₅O₁₂–Fe₂O₃ was determined by X-ray powder diffraction analysis. The obtained results expand the knowledge of the possible variations of cation ratios Y : Bi : Fe : Ga in garnet, which can be used for searching for and creating new stable magneto-optical materials.     

Phase formation in Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-K<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-MMoO<Subscript>4</Subscript> (M = Ca,Pb, Ba) systems and the crystal structure of α-KLiMoO<Subscript>4</Subscript>

Solid-phase interactions in Li₂MoO₄-K₂MoO₄-MMoO₄ (M = Ca, Pb, Ba) systems were studied, and the subsolidus regions of these systems were triangulated. The lead and barium systems were studied in a more detailed way to discover that, along KLiMoO₄-K₂M(MoO₄)₂ (M = Pb, Ba), KLiMoO₄-PbMoO₄, and Li₂MoO₄-K₂Ba(MoO₄)₂ quasi-binary sections, there are homogeneity regions reaching 6–11 mol % based on K₂M(MoO₄)₂ and lead molybdate. Triple molybdates are formed in none of the systems, which is verified by experiments on spontaneous crystallization from solution in melt. Crystallization experiments yielded crystals of potassium dimolybdate and simple and double molybdates from the boundary systems. The crystal structure was solved for a hexagonal KLiMoO₄ phase: (Na,K){ZnPO4}, a = 18.8838(7) Å, c = 8.9911(6)Å, Z = 24, space group P6₃, R = 0.065. The structure comprises a three-dimensional tridymite framework built by an alternation of corner-sharing LiO₄- and MoO₄ tetrahedra wherein voids are occupied by potassium cations.     

Structure of bismuth oxoborate Bi<Subscript>4</Subscript>B<Subscript>2</Subscript>O<Subscript>9</Subscript> at 20, 200, and 450°C

Single crystals of bismuth oxoborate Bi₄B₂O₉ have been grown by slowly cooling the melt of a stoichiometric Bi₂O₃ + H₃BO₃ mixture. The structure of the borate (monoclinic space group P2₁/c, a = 11.107 Å, b = 6.629 Å, c = 11.044 Å, β = 91.04°, Z = 4) has been studied at 20, 200, and 450°C. The structure is described not only in terms of full BiO₆ ^? and BiO₇ polyhedra but also in terms of truncated BiO₃ ^? and BiO₄ ^? polyhedra and BO₃ triangles, as well as oxo-centered OBi₃ triangles and OBi₄ tetrahedra. It is shown that both the B-O and Bi-O bond lengths are practically unaffected by temperature. Only the angles between polyhedra change with temperature, being responsible for the strong anisotropy of Bi₄B₂O₆ thermal expansion, which was measured by high-temperature powder X-ray diffraction: α₁₁ = 20, α₂₂ = 15, α₃₃ = 6 × 10^?6 °C^?1, and μ = (c, α₃₃) = ?19°.     

Phase equilibria,water dissolution,and peculiarities of charge transfer in Ca-doped La<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>7–α</Subscript>

A series of oxides La_{2 - x} Ca _x Zr₂O_7–α (x = 0.00, 0.05, 0.10, 0.15, 0.20) is synthesized. It is found that in samples with the calcium content x = 0.15, 0.20, the second phase Ca_0.9La_0.2Zr_0.9O₃ is present in the fraction increasing with the increase in x. The solubility limit of calcium to form solid solutions based on La₂Zr₂O₇ corresponds to x = 0.1. By high-temperature gravimetry, the proton concentration in La_1.95Са_0.05Zr₂O_7–α is obtained as a function of temperature in the interval of 300–950°С in Н₂О–О₂ atmosphere. According to temperature programmed desorption studies, in the temperature range of 400–900°С at least two types of OH defects with different binding energies are present in the oxide lattice. The temperature dependences of conductivity are obtained for La_1.95Са_0.05Zr₂O_7–α in dry and humid air atmosphere in the temperature range of 350–800°С by the method of impedance spectroscopy. The electrolyte conductivity in humid air is shown to substantially exceed the corresponding values in dry air, which can be associated with manifestation of protonic conductivity in humid atmosphere. The dependences of oxide conductivity on the oxygen content in the gas phase are determined. The conductivity is divided into its ionic and hole components.     

Synthesis and crystal structure of the π copper(I) cyanide complex with N,N′-diallyl thiocarbamide 2CuCN · (C<Subscript>3</Subscript>H<Subscript>5</Subscript>NH)<Subscript>2</Subscript>CS

Crystals of the π copper(I) cyanide complex with N,N′-diallyl thiocarbamide, 2CuCN · (C₃H₅NH)₂CS (I), are synthesized from an aqueous-methanol solution of potassium nitroprusside, diallyl thiocarbamide on a copper electrode using the method of alternating-current electrochemical synthesis. The crystals are monoclinic: space group P2₁/n, a = 6.9440(5) Å, b = 13.760(1)) Å, c = 12.733(1) Å, β = 97.280(9)°, V = 1206.8(2) ų, Z = 4, R = 0.0361, R _w = 0.0362 for 2836 independent reflections with F ≥ 4σ(F). A unique polymeric structure is built due to the Cu(I)-(C=C) π bond and the bridging function of the thioamide S atom of the ligand molecule and one of the two independent cyano groups.     

A theoretical investigation on the structures and stabilities of C<Subscript>60</Subscript>X<Subscript>18</Subscript> and C<Subscript>70</Subscript>X<Subscript>10</Subscript> (X = H,F, Cl,and Br)

A density functional theory study was performed on fullerene derivatives C₆₀X₁₈ and C₇₀X₁₀ (X = H, F, Cl, and Br). The calculated results show that the lowest energy isomers are IPR-satisfying for C₆₀X₁₈ (X = H, F, Cl, and Br). It is found that the addition patterns of X (X = Cl and Br) are different from those of X (X = H and F) for C₆₀, demonstrating that the stability of fullerene derivatives is partly attributed to the steric repulsion and electronegativity of added atoms. However, the lowest energy isomers are IPR-violating for C₇₀X₁₀ (X = H, F, and Cl), suggesting that many more fullerene derivatives may violate the isolated pentagon rule.