A gas-phase crossed-beam study of OH produced in the radical-radical reaction of O((3)P) with iso-propyl radical (CH3)2CH

The gas-phase radical-radical reaction dynamics of ground-state atomic oxygen [O((3)P)] with iso-propyl radicals, (CH(3))(2)CH, were investigated by applying a combination of high-resolution laser-induced fluorescence spectroscopy in a crossed-beam configuration and ab initio calculations. The nascent distributions of OH (X(2)Π: υ' = 0) from the major reaction channel O((3)P) + (CH(3))(2)CH → C(3)H(6) (propene) + OH showed substantial internal excitations with a bimodal feature of low- and high-N' components with neither spin-orbit nor Λ-doublet propensities. Unlike previous kinetic results, proposed to proceed only through the direct H-atom abstraction process, on the basis of the population analysis and comparison with the statistical theory, the title reaction can be described in terms of two competing mechanisms at the molecular level: direct abstraction process and indirect short-lived addition-complex-forming process with a ratio of 1.25?:?1.     

A theoretical investigation of the gas-phase oxidation reaction of the saturated tert-butyl radical.

The radical-radical reaction mechanisms and dynamics of ground-state atomic oxygen [O(3P)] with the saturated tert-butyl radical (t-C4H9) are investigated using the density functional method and the complete basis set model. Two distinctive reaction pathways are predicted to be in competition: addition and abstraction. The barrierless addition of O(3P) to t-C4H9 leads to the formation of an energy-rich intermediate (OC4H9) on the lowest doublet potential energy surface, which undergoes subsequent direct elimination or isomerization-elimination leading to various products: C3H6O + CH3, iso-C4H8O + H, C3H7O + CH2, and iso-C4H8 + OH. The respective microscopic reaction processes examined with the aid of statistical calculations, predict that the major addition pathway is the formation of acetone (C3H6O) + CH3 through a low-barrier, single-step cleavage. For the direct, barrierless H-atom abstraction mechanism producing iso-C4H8 (isobutene) + OH, which was recently reported in gas-phase crossed-beam investigations, the reaction is described in terms of both an abstraction process (major) and a short-lived addition dynamic complex (minor).     

Regioselective synthesis of indenols via nickel-catalyzed carbocyclization reaction

2-Halophenyl ketones 1a-e (1a, o-IC(6)H(4)COCH(3)) undergo carbocyclization with alkyl propiolates (2a, CH(3)(CH(2))(4)C[triple bond]CCO(2)CH(3); 2b, TMSC[triple bond]CCO(2)Et 2c, CH(3)C[triple bond]CCO(2)CH(3); 2d, CH(3)OCH(2)C[triple bond]CCO(2)CH(3); 2e, CH(3)(CH(2))(3)C[triple bond]CCO(2)CH(3); 2f, PhC[triple bond]CCO(2)CH(3); and 2g, (CH(3))(3)C[triple bond]CCO(2)CH(3)) in the presence of Ni(dppe)Br(2) and zinc powder in acetonitrile at 80 degrees C to afford the corresponding indenol derivatives 3a-m with remarkable regioselectivity in good to excellent yields. The nickel-catalyzed carbocyclization reaction was successfully extended to other simple disubstituted alkynes. Thus, the reaction of 2-halophenyl ketones 1a-e with disubstituted alkynes (2h, PhC[triple bond]CPh; 2i, CH(3)C(6)H(4)C[triple bond]CC(6)H(4)CH(3); 2j, CH(3)CH(2)C[triple bond]CCH(2)CH(3); 2k, PhC[triple bond]CCH(3); 2l, TMSC[triple bond]CCH(3); and 2m, PhC[triple bond]C(CH(2))(3)CH(3)) proceeded smoothly to afford the corresponding indenols 4a-t in good to excellent yields. For unsymmetrical alkynes 2k-m, the carbocyclization gave two regioisomers with regioselectivities ranging from 1:2 to 1:12 depending on the substituents on the alkyne and on the aromatic ring of halophenyl ketone. A possible mechanism for this nickel-catalyzed carbocyclization reaction is also proposed.     

Potential energy surfaces, product distributions and thermal rate coefficients of the reaction of O(3P) with C2H4(X1Ag): a comprehensive theoretical study

The potential energy surface for the O((3)P) + C(2)H(4) reaction, which plays an important role in C(2)H(4)/O(2) flames and in hydrocarbon combustion in general, was theoretically reinvestigated using various quantum chemical methods, including G3, CBS-QB3, G2M(CC,MP2), and MRCI. The energy surfaces of both the lowest-lying triplet and singlet electronic states were constructed. The primary product distribution for the multiwell multichannel reaction was then determined by RRKM statistical rate theory and weak-collision master equation analysis using the exact stochastic simulation method. Intersystem crossing of the "hot" CH(2)CH(2)O triplet adduct to the singlet surface, shown to account for about half of the products, was estimated to proceed at a rate of approximately 1.5 x 10(11) s(-1). In addition, the thermal rate coefficients k(O + C(2)H(4)) in the T = 200-2000 K range were computed using multistate transition state theory and fitted by a modified Arrhenius expression as k(T) = 1.69 x 10(-16) x T(1.66) x exp(-331 K/T) . Our computed rates and product distributions agree well with the available experimental results. Product yields are found to show a monotonic dependence on temperature. The major products (with predicted yields at T = 300 K/2000 K) are: CH(3) + CHO (48/37%), H + CH(2)CHO (40/19%), and CH(2)(X(3)B(1)) + H(2)CO (5/29%), whereas H + CH(3)CO, H(2) + H(2)CCO, and CH(4) + CO are all minor (< or =5%).     

Vibrational and rotational distributions of the CH(A2Delta) product of the C(2)H + O(3P) reaction studied by fourier transform visible (FTVIS) emission spectroscopy

The C(2)H + O((3)P) --> CH(A) + CO reaction is investigated using Fourier transform visible emission spectroscopy. The O((3)P) and C(2)H radicals are produced by simultaneous 193 nm photolysis of SO(2) and C(2)H(2) precursors, respectively. The nascent vibrational and rotational distributions of the CH(A) product are obtained under time-resolved, but quasi-steady-state, conditions facilitated by the short lifetime of the CH(A) emission. The vibrational temperature of the CH(A) product is found to be appreciably hotter (2800 +/- 100 K) than the rotational distributions in the v' = 0 (1400 +/- 100 K) and v' = 1 (1250 +/- 250 K) levels. The results suggest that the reaction may proceed through an electronically excited HCCO() intermediate; moreover, the vibrational excitation compared to rotational excitation is higher than expected based on a statistical distribution of energy and may be the result of geometrical changes in the transition state. The CH(A) emission is also observed in a C(2)H(2)/O/H reaction mixture using a microwave discharge apparatus to form O atoms, with subsequent H atom production. The nascent rotational and vibrational distributions of the CH(A) determined by the microwave discharge apparatus are very similar to the CH(A) distributions obtained in the photodissociation experiment. The results support the idea that the C(2)H + O((3)P) reaction may play a role in low-pressure C(2)H(2)/O/H flames, as previously concluded.     

Oxalate-bridged complexes of dimolybdenum and ditungsten supported by pivalate ligands: ((t)BuCO(2))(3)M(2)(mu-O(2)CCO(2))M(2)(O(2)C(t)Bu)(3). Correlation of the solid-state, molecular, and electronic structures with Raman, resonance Raman, and electronic spectral data

The compounds ((t)BuCO(2))(3)M(2)(mu-O(2)CCO(2))M(2)(O(2)C(t)Bu)(3) (M(4)OXA), where M = Mo or W, are shown by analysis of powder X-ray diffraction data to have extended lattice structures wherein oxygen atoms from the oxalate and pivalate ligands of one M(4)OXA molecule are linked to metal atoms of neighboring molecules. Raman, resonance Raman, electronic absorption (2-325 K in 2-MeTHF), and emission spectra are reported, together with corresponding spectra of the mu-O(2)(13)C(13)CO(2) isotopomers. To aid in the assignment, the Raman spectra of K(2)C(2)O(4).H(2)O and K(2)(13)C(2)O(4).H(2)O have also been recorded. The visible region of the electronic spectra is dominated by intense, fully allowed MLCT transitions, M(2) delta to oxalate pi*, which show pronounced thermochromism and extensive vibronic progressions associated with the oxalate ligand at low temperatures. With excitation into these charge-transfer bands, strong resonance enhancement is seen for Raman bands assigned to the oxalate nu(1)(a(g)) and, to a lesser extent, nu(2)(a(g)) modes. Electronic structure calculations for the model compounds (HCO(2))(3)M(2)(mu-O(2)CCO(2))M(2)(O(2)CH)(3), employing density functional theory (gradient corrected and time-dependent) with the Gaussian 98 and ADF 2000 packages, predict the planar oxalate D(2h) configuration to be favored, which maximizes M(2) delta to oxalate pi* back-bonding, and indicate low barriers (<8 kcal mol(-1)) to rotation about the oxalate C-C bonds.     

Reactions of superoxo and oxo metal complexes with aldehydes. Radical-specific pathways for cross-disproportionation of superoxometal ions and acylperoxyl radicals

The aquachromyl(IV) ion, Cr(aq)O(2+), reacts with acetaldehyde and pivaldehyde by hydrogen atom abstraction and, in the presence of O(2), produces acylperoxyl radicals, RC(O)OO(*). In the next step, the radicals react with Cr(aq)OO(2+), a species accompanying Cr(aq)O(2+) in our preparations. The rate constant for the Cr(aq)OO(2+)/CH(3)C(O)OO(*) cross reaction, k(Cr) = 1.5 x 10(8) M(-1) s(-1), was determined by laser flash photolysis. The evidence points to radical coupling at the remote oxygen of Cr(aq)OO(2+), followed by elimination of O(2) and formation of CH(3)COOH and Cr(V)(aq)O(3+). The latter disproportionates and ultimately yields Cr(aq)(3+) and HCrO(4)(-). No CO(2) was detected. The Cr(aq)OO(2+)/C(CH(3))(3)C(O)OO(*) reaction yielded isobutene, CO(2), and Cr(aq)(3+), in addition to chromate. In the suggested mechanism, the transient Cr(aq)OOOO(O)CC(CH(3))(3)(2+) branches into two sets of products. The path leading to chromate resembles the CH(3)C(O)OO(*) reaction. The other products arise from an unprecedented intramolecular hydrogen transfer from the tert-butyl group to the CrO entity and elimination of CO(2) and O(2). A portion of C(CH(3))(3)C(O)OO(*) was captured by (CH(3))(3)COO(*), which was in turn generated by decarbonylation of acyl radicals and oxygenation of tert-butyl radicals so formed.     

Structural characterization of glycoporphyrins by electrospray tandem mass spectrometry

Porphyrin derivatives having a galactose or a bis(isopropylidene)galactose structural unit, linked by ester or ether bonds, were characterized by electrospray tandem mass spectrometry (ES-MS/MS). The electrospray mass spectra of these glycoporphyrins show the corresponding [M + H](+) ions. For the glycoporphyrins with pyridyl substituents and those having a tetrafluorophenyl spacer, the doubly charged ions [M + 2H](2+) were also observed in ES-MS with high relative abundance. The fragmentation of both [M + H](+) and [M + 2H](2+) ions exhibited common fragmentation pathways for porphyrins with the same sugar residue, independently of the porphyrin structural unit and type of linkage. ES-MS/MS of the [M + H](+) ions of the galactose-substituted porphyrins gave the fragment ions [M + H - C(2)H(4)O(2)](+), [M + H - C(3)H(6)O(3)](+), [M + H - C(4)H(8)O(4)](+) and [M + H - galactose residue](+). The fragmentation of the [M + 2H](2+) ions of the porphyrins with galactose shows the common doubly charged fragment ions [porphyrin + H](2+), [M + 2H - C(2)H(4)O(2)](2+), [M + 2H - C(4)H(8)O(4)](2+), [M + 2H - galactose residue](2+) and the singly charged fragment ions [M + H - C(3)H(6)O(3)](+) and [M + H - galactose residue](+). The fragmentation of the [M + H](+) ions of glycoporphyrins with a protected galactosyl residue leads mainly to the ions [M + H - CO(CH(3))(2)](+), [M + H - 2CO(CH(3))(2)](+), [M + H - 2CO(CH(3))(2) - CO](+), [M + H - C(10)H(16)O(4)](+) and [M + H - protected galactose](+). The doubly charged ions [M + 2H](2+) fragment to give the doubly charged ions [porphyrin + H](2+) and the singly charged ions [M + H - protected galactose residue](+) and [M + H - CO(CH(3))(2)](+). For the porphyrins where the sugar structural unit is linked by an ester bond, [M + 2H](2+), ES-MS/MS showed a major and typical fragmentation corresponding to combined loss of a sugar structural unit and further loss of water, leading to the ion [M + 2H - sugar residue - H(2)O](2+), independently of the structure of the sugar structural unit. These results show that ES-MS/MS can be a powerful tool for the characterization of the sugar structural unit of glycoporphyrins, without the need for chemical hydrolysis.     

Ni(II), Pd(II) and Pt(II) complexes of PNP and PSP tridentate amino-phosphine ligands

The ligands D((CH(2))(2)NHPiPr(2))(2) (D = NH 1, S 2) react with (dme)NiCl(2) or (PhCN)(2)MCl(2) (M = Pd, Pt) to give complexes of the form [D((CH(2))(2)NHPiPr(2))(2)MX]X (X = Cl, I; M = Ni, Pd, Pt) which were converted to corresponding iodide derivatives by reaction with Me(3)SiI. Reaction of 1 or 2 with (COD)PdMeCl affords facile routes to [κ(3)P,N,P-NH((CH(2))(2)NHPiPr(2))(2)PdMe]Cl (8a) and [κ(3)P,S,P-S((CH(2))(2)NHPiPr(2))(2)PdMe]Cl (9a) in high yields. An alternative synthetic approach involves oxidative addition of MeI to a M(0) precursor yielding [κ(3)P,N,P-HN(CH(2)CH(2)NHPiPr(2))(2)NiMe]I (10), [κ(3)P,N,P-HN(CH(2)CH(2)NHPiPr(2))(2)MMe]I (M = Pd 8b Pt 11) and [κ(3)P,S,P-S(CH(2)CH(2)NHPiPr(2))(2)MMe]I (M = Pd 9b, Pt 12). Alternatively, use of NEt(3)HCl in place of MeI produces the species [κ(3)P,N,P-HN(CH(2)CH(2)NHPiPr(2))(2)MH]X (X = Cl, M = Ni 13a, Pd 14a, Pt 16a). The analogs containing 2; [κ(3)P,S,P-S((CH(2))(2)NHPiPr(2))(2)MH]X (M = Pd, X = PF(6)15: M = Pt, X = Br, 17a, PF(6)17b) were also prepared in yields ranging from 74-93%. In addition, aryl halide oxidative addition was also employed to prepare [κ(3)P,N,P-HN(CH(2)CH(2)NHPiPr(2))(2)MC(6)H(4)F]Cl (M = Ni 18, Pd 19) and [κ(3)P,S,P-S((CH(2))(2)NHPiPr(2))(2)Pd(C(6)H(4)F)]Cl (20). Crystal structures of 3a, 4a, 5a, 6a, 8a, 9a, 14b and 16b are reported.     

Ab initio investigations of the radical-radical reaction of O(3P) + C3H3

We present ab initio calculations of the reaction of ground-state atomic oxygen [O((3)P)] with a propargyl (C(3)H(3)) radical based on the application of the density-functional method and the complete basis-set model. It has been predicted that the barrierless addition of O((3)P) to C(3)H(3) on the lowest doublet potential-energy surface produces several energy-rich intermediates, which undergo subsequent isomerization and decomposition steps to generate various exothermic reaction products: C(2)H(3)+CO, C(3)H(2)O+H, C(3)H(2)+OH, C(2)H(2)+CHO, C(2)H(2)O+CH, C(2)HO+CH(2), and CH(2)O+C(2)H. The respective reaction pathways are examined extensively with the aid of statistical Rice-Ramsperger-Kassel-Marcus calculations, suggesting that the primary reaction channel is the formation of propynal (CHCCHO)+H. For the minor C(3)H(2)+OH channel, which has been reported in recent gas-phase crossed-beam experiments [H. Lee et al., J. Chem. Phys. 119, 9337 (2003); 120, 2215 (2004)], a comparison on the basis of prior statistical calculations is made with the nascent rotational state distributions of the OH products to elucidate the mechanistic and dynamic characteristics at the molecular level.     

A family of manganese rods: syntheses, structures, and magnetic properties

The reaction of the mixed-valent metal triangles [Mn(3)O(O(2)CR)(6)(py)(3)] (R = CH(3), Ph, C(CH(3))(3)) with the tripodal ligands H(3)thme (1,1,1-tris(hydroxymethyl)ethane) and H(3)tmp (1,1,1-tris(hydroxymethyl)propane) in MeCN, produces a family of manganese rodlike complexes whose structures are all derived from a series of edge-sharing triangles. Variable temperature direct current (dc) magnetic susceptibility data were collected for all complexes in the 1.8-300 K temperature range in fields up to 7.0 T. Complex 1, [Mn(12)O(4)(OH)(2)(PhCOO)(12)(thme)(4)(py)(2)], has an S = 7 ground state with the parameters g = 1.98 and D = -0.13 K. Complex 2, [Mn(8)O(4)((CH(3))(3)CCO(2))(10)(thme)(2)(py)(2)] has a ground state of S = 6, with g = 1.81 and D = -0.36 K. Complex 3, [Mn(7)O(2)(PhCO(2))(9)(thme)(2)(py)(3)], has a spin ground states of S = 7 with the parameters g = 1.78 and D = -0.20 K. The best fit for complex 4, [Mn(6)((CH(3))(3)CCO(2))(8)(tmp)(2)(py)(2)], gave a spin ground state of S = 3 with the parameters g = 1.73 and D = -0.75 K, but was of poorer quality than that normally obtained. The presence of multiple Mn(2+) ions in the structure of 4 leads to the presence of low-lying excited states with energy levels very close to the ground state, and in the case of complex 5, [Mn(6)(CH(3)CO(2))(6)(thme)(2)(H(2)tea)(2)], no satisfactory fit of the data was obtained. DFT calculations on 4 and 5 indicate complexes with spin ground states of S = 4 and S = 0 respectively, despite their topological similarities. Single-crystal hysteresis loop and relaxation measurements show complex 1 to be a SMM.     

Phosphino carboxylic acid ester functionalized carbosilane dendrimers: nanoscale ligands for the Pd-catalyzed hydrovinylation reaction in a membrane reactor

Phosphino carboxylic acid ester terminated G(0) compounds Si(CH(2))(3)SiMe(2)(C(6)H(4)CH(2)OC(O)(CH(2))(n)()CH(2)PPh(2)(4) (9a and 9b; n = 1, 2) and the carbosilane dendrimers Si(CH(2))(3)Si((CH(2))(3)SiMe(2)(C(6)H(4)CH(2)OC(O)(CH(2))(n)()CH(2) PPh(2))(3)(4) (10a and 10b; n = 1, 2) have been prepared as hemilabile nanoscale ligands for the palladium-catalyzed codimerization of olefins. The hydrovinylation of styrene was carried out in a continuously operated nanofiltration membrane reactor. Under continuous conditions, the selectivity of the reaction is increased considerably. Monomeric model complexes and the dendritic catalysts were compared for their activity and selectivity in batch reactions. The Pd catalyst complexes were prepared in situ from the dendritic ligands and an (allyl)palladium(II) precursor.     

Cationic assembly of metal complex aggregates: structural diversity,solution stability,and magnetic properties

The tetradentate imino-carboxylate ligand [L](2)(-) chelates the equatorial sites of Ni(II) to give the complex [Ni(L)(MeOH)(2)] in which a Ni(II) center is bound in an octahedral coordination environment with MeOH ligands occupying the axial sites. Lanthanide (Ln) and Group II metal ions (M) template the aggregation of six [Ni(L)] fragments into the octahedral cage aggregates (M[Ni(L)](6))(x)(+) (1: M = Sr(II); x = 2,2: M = Ba(II); x = 2, 3: M = La(III); x = 3, 4: M = Ce(III); x = 3, 5: M = Pr(III); x = 3, and 6: M = Nd(III); x = 3). In the presence of Group I cations, however, aggregates composed of the alkali metal-oxide cations template various cage compounds. Thus, Na(+) forms the trigonal bipyramidal [Na(5)O](3+) core within a tricapped trigonal prismatic [Ni(L)](9) aggregate to give ((Na(5)O) subset [Ni(L)](9)(MeOH)(3))(BF(4))(2).OH.CH(3)OH, 7. Li(+) and Na(+) together form a mixed Li(+)/Na(+) core comprising distorted trigonal bipyramidal [Na(3)Li(2)O](3+) within an approximately anti-square prismatic [Ni(L)](8) cage in ((Na(3)Li(2)O) subset [Ni(L)](8)(CH(3)OH)(1.3)(BF(4))(0.7))(BF(4))(2.3).(CH(3)OH)(2.75).(C(4)H(10)O)(0.5), 8, while in the presence of Li(+), a tetrahedral [Li(4)O](2+) core within a hexanuclear open cage [Ni(L)](6) in ((Li(4)O) subset [Ni(L)](6)(CH(3)OH)(3))2ClO(4).1.85CH(3)OH, 9, is produced. In the presence of H(2)O, the Cs(+) cation induces the aggregation of the [Ni(L)(H(2)O)(2)] monomer to give the cluster Cs(2)[Ni(L)(H(2)O)(2)](6).2I.4CH(3)OH.5.25H(2)O, 10. Analysis by electronic spectroscopy and mass spectrometry indicates that in solution the trend in stability follows the order 1-6 > 7 > 8 approximately 9. Magnetic susceptibility data indicate that there is net antiferromagnetic exchange between magnetic centers within the cages.     

Thermochemical and kinetic analysis on the reactions of O2 with products from OH addition to isobutene, 2-hydroxy-1,1-dimethylethyl, and 2-hydroxy-2-methylpropyl radicals: HO2 formation from oxidation of neopentane, Part II

Unimolecular dissociation of a neopentyl radical to isobutene and methyl radical is competitive with the neopentyl association with O2 ((3)Sigma(g)-) in thermal oxidative systems. Furthermore, both isobutene and the OH radical are important primary products from the reactions of neopentyl with O2. Consequently, the reactions of O2 with the 2-hydroxy-1,1-dimethylethyl and 2-hydroxy-2-methylpropyl radicals resulting from the OH addition to isobutene are important to understanding the oxidation of neopentane and other branched hydrocarbons. Reactions that correspond to the association of radical adducts with O2((3)Sigma(g)-) involve chemically activated peroxy intermediates, which can isomerize and react to form one of several products before stabilization. The above reaction systems were analyzed with ab initio and density functional calculations to evaluate the thermochemistry, reaction paths, and kinetics that are important in neopentyl radical oxidation. The stationary points of potential energy surfaces were analyzed based on the enthalpies calculated at the CBS-Q level. The entropies, S(degrees)298, and heat capacities, C(p)(T), (0 相似文献   

A crossed molecular beam study of the O(1D) + C(3)H(8) reaction: multiple reaction pathways.

The O((1)D) + C(3)H(8) reaction has been reinvestigated using the universal crossed molecular beam method. Three reaction channels, CH(3) + C(2)H(4)OH, C(2)H(5) + CH(2)OH, and OH + C(3)H(7), have been observed. All three channels are significant in the title reaction with the C(2)H(5) formation process to be the most important, while the CH(3) formation and the OH formation channels are about equal. Product kinetic energy distributions and angular distributions have been determined for the three reaction channels observed. The oxygen-containing radicals in the CH(3) and C(2)H(5) formation pathways show forward-backward symmetric angular distribution relative to the O atom beam, while the OH product shows a clearly forward angular distribution. These results indicate that the OH formation channel seems to exhibit different dynamics from the CH(3) and C(2)H(5) channels.     

New mechanistic insights to the O(3P) + propene reaction from multiplexed photoionization mass spectrometry

The reaction of O((3)P) with propene (C(3)H(6)) has been examined using tunable vacuum ultraviolet radiation and time-resolved multiplexed photoionization mass spectrometry at 4 Torr and 298 K. The temporal and isomeric resolution of these experiments allow the separation of primary from secondary reaction products and determination of branching ratios of 1.00, 0.91 ± 0.30, and 0.05 ± 0.04 for the primary product channels CH(3) + CH(2)CHO, C(2)H(5) + HCO, and H(2) + CH(3)CHCO, respectively. The H + CH(3)CHCHO product channel was not observable for technical reasons in these experiments, so literature values for the branching fraction of this channel were used to convert the measured product branching ratios to branching fractions. The results of the present study, in combination with past experimental and theoretical studies of O((3)P) + C(3)H(6), identify important pathways leading to products on the C(3)H(6)O potential energy surface (PES). The present results suggest that up to 40% of the total product yield may require intersystem crossing from the initial triplet C(3)H(6)O PES to the lower-lying singlet PES.     

Kinetics of acid-catalyzed O-atom transfer from a hydroperoxorhodium complex to organic and inorganic substrates

Oxygen atom transfer from (NH(3))(4)(H(2)O)RhOOH(2+) to organic and inorganic nucleophiles takes place according to the rate law -d[(NH(3))(4)(H(2)O)RhOOH(2+)]/dt = k[H(+)] [(NH(3))(4)(H(2)O)RhOOH(2+)][nucleophile] for all the cases examined. The third-order rate constants were determined in aqueous solutions at 25 degrees C for (CH(2))(5)S (k = 430 M(-)(2) s(-)(1), micro = 0.10 M), (CH(2))(4)S(2) (182, micro = 0.10 M), CH(3)CH(2)SH (8.0, micro = 0.20 M), (en)(2)Co(SCH(2)CH(2)NH(2))(2+) (711, micro = 0.20 M), and, in acetonitrile-water, CH(3)SPh (130, 10% AN, micro = 0.20 M), PPh(3) (3.74 x 10(3), 50% AN), and (2-C(3)H(7))(2)S (45, 50% AN, micro = 0.20 M). Oxidation of PPh(3) by (NH(3))(4)(H(2)O)Rh(18)O(18)OH(2+) produced (18)OPPh(3). The reaction with a series of p-substituted triphenylphosphines yielded a linear Hammett relationship with rho = -0.53. Nitrous acid (k = 891 M(-)(2) s(-)(1)) is less reactive than the more nucleophilic nitrite ion (k = 1.54 x 10(4) M(-)(2) s(-)(1)).     

Highly regio- and chemoselective [2 + 2 + 2] cycloaddition of electron-deficient diynes with allenes catalyzed by nickel complexes: a novel entry to polysubstituted benzene derivatives

Diynes 1a-c [X(CH(2)Ctbd1;CCO(2)Me)(2): X = (CH(2))(2), 1a, X = CH(2), 1b and X = O, 1c] undergo [2 + 2 + 2] ene-diyne cycloaddition reactions with a variety of allenes (n-butylallene 2a, phenylallene 2b, (4-chlorophenyl)allene 2c, (4-bromophenyl)allene 2d, (3-methoxyphenyl)allene 2e, 1-naphthylallene 2f, cyclohexylallene 2g and cyclopentylallene 2h) in the presence of Ni(dppe)Br(2) and Zn powder in CH(3)CN at 80 degrees C for 8 h to give the corresponding polysubstituted benzene derivatives 4a-l in good to excellent yields. Under similar reaction conditions, unsymmetrical diynes 5a-c (HCtbd1;CCH(2)XCH(2)Ctbd1;CCO(2)Me) react with allenes 2 to afford exclusively the corresponding meta-isomers 6a-g in 73-86% yields. The catalytic reaction is highly regioselective and completely chemoselective. This synthetic method is compatible with many functional groups such as Cl, Br, and OMe on the phenyl group of the allene moiety and an ether linkage in a diyne moiety. In this catalytic reaction, allenes are synthetically equivalent to terminal alkynes. Interestingly, unsymmetrical diyne 7 (MeCtbd1;C(CH(2))(4)Ctbd1;CCO(2)Me) undergoes 2:1 cocyclotrimerization with allenes 2a and 2g to afford the corresponding polysubstituted benzene derivatives 9a,b in 87% and 82% yields, respectively. A plausible mechanism involving a nickelacycloheptadiene intermediate is proposed to account for this nickel-catalyzed reaction.     

First row divalent transition metal complexes of aryl-appended tris((pyridyl)methyl)amine ligands: syntheses, structures, electrochemistry, and hydroxamate binding properties

Divalent manganese, cobalt, nickel, and zinc complexes of 6-Ph(2)TPA (N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-Ph(2)TPA)Mn(CH(3)OH)(3)](ClO(4))(2) (1), [(6-Ph(2)TPA)Co(CH(3)CN)](ClO(4))(2) (2), [(6-Ph(2)TPA)Ni(CH(3)CN)(CH(3)OH)](ClO(4))(2) (3), [(6-Ph(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (4)) and 6-(Me(2)Ph)(2)TPA (N,N-bis((6-(3,5-dimethyl)phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-(Me(2)Ph)(2)TPA)Ni(CH(3)CN)(2)](ClO(4))(2) (5) and [(6-(Me(2)Ph)(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (6)) have been prepared and characterized. X-ray crystallographic characterization of 1A.CH(3)()OH and 1B.2CH(3)()OH (differing solvates of 1), 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN revealed mononuclear cations with one to three coordinated solvent molecules. In 1A.CH(3)()OH and 1B.2CH(3)()OH, one phenyl-substituted pyridyl arm is not coordinated and forms a secondary hydrogen-bonding interaction with a manganese bound methanol molecule. In 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN, all pyridyl donors of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands are coordinated to the divalent metal center. In the cobalt, nickel, and zinc derivatives, CH/pi interactions are found between a bound acetonitrile molecule and the aryl appendages of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands. (1)H NMR spectra of 4 and 6 in CD(3)NO(2) solution indicate the presence of CH/pi interactions, as an upfield-shifted methyl resonance for a bound acetonitrile molecule is present. Examination of the cyclic voltammetry of 1-3 and 5 revealed no oxidative (M(II)/M(III)) couples. Admixture of equimolar amounts of 6-Ph(2)TPA, M(ClO(4))(2).6H(2)O, and Me(4)NOH.5H(2)O, followed by the addition of an equimolar amount of acetohydroxamic acid, yielded the acetohydroxamate complexes [((6-Ph(2)TPA)Mn)(2)(micro-ONHC(O)CH(3))(2)](ClO(4))(2) (8), [(6-Ph(2)TPA)Co(ONHC(O)CH(3))](ClO(4))(2) (9), [(6-Ph(2)TPA)Ni(ONHC(O)CH(3))](ClO(4))(2) (10), and [(6-Ph(2)TPA)Zn(ONHC(O)CH(3))](ClO(4))(2) (11), all of which were characterized by X-ray crystallography. The Mn(II) complex 8.0.75CH(3)()CN.0.75Et(2)()O exhibits a dinuclear structure with bridging hydroxamate ligands, whereas the Co(II), Ni(II), and Zn(II) derivatives all exhibit mononuclear six-coordinate structures with a chelating hydroxamate ligand.     

Quantum chemical and statistical rate study of the reaction of O(3P) with allene: O-addition and H-abstraction channels

The lowest-lying triplet and singlet potential energy surfaces for the O(3P) + CH2=C=CH2 reaction were theoretically characterized using the complete basis set model chemistry, CBS-QB3. The primary product distributions for the multistate multiwell reactions on the individual surfaces were then determined by RRKM statistical rate theory and weak-collision master equation analysis using the exact stochastic simulation method. The results predict that the electrophilic O-addition pathways on the central and terminal carbon atom are dominant up to combustion temperatures. Major predicted end-products for the addition routes include CO + C2H4, 3CH2 + H2CCO, and CH2=C*-CHO + H*, in agreement with experimental evidence. CO + C2H4 are mainly generated from the lowest-lying singlet surface after an intersystem crossing process from the initial triplet surface. Efficient H-abstraction pathways are newly identified and occur on two different electronic state surfaces, 3A' and 3A', resulting in OH + propargyl radicals; they are predicted to play an important role at higher temperatures in hydrocarbon combustion chemistry and flames, with estimated contributions of ca. 35% at 2000 K. The overall thermal rate coefficient k(O + C3H4) at 200-1000 K was computed using multistate transition state theory: k(T) = 1.60 x 10(-17) x T (2.05) x exp(-90 K/T) cm3 molecule(-1) s(-1), in good agreement with experimental data available for the 300-600 K range.