Cu(II) removal enhancement from aqueous solutions using ion-imprinted membrane technique

In this study, Cu(II)-ion-imprinted membrane adsorbents were prepared via cross-linking of blended chitosan/poly(vinyl alcohol) using glutaraldehyde as cross-linker and copper ions as template. The ability of IIMs to adsorb copper ions from aqueous solutions was assessed using a batch of experiments under different conditions by changing cross-linking density (0.05 mass %, 0.1 mass %, and 0.2 mass %), template content (0.2 mass %, 0.5 mass %, and 0.9 mass %), initial analyte concentration (50 mg L^?1, 100 mg L^?1, and 150 mg L^?1), and adsorbent concentration (0.5 g L^?1, 1.0 g L^?1, and 2.0 g L^?1). The Taguchi method was used to plan a minimum number of experiments. The following optimal levels were thus determined for the four factors: cross-linking density: 0.1 mass %; template content: 0.5 mass %; initial analyte concentration: 150 mg L^?1; and adsorbent concentration: 0.3 g L^?1.     

Hydroquinone-bridged dinuclear Cu(II) complexes and single-crystalline Cu(II) coordination polymers

Cationic dinuclear Cu(II) complexes 3 and 4 have been prepared using the novel hydroquinone-based imine chelators 2,5-((i)Pr(2)NCH(2)CH(2)N[double bond, length as m-dash]CH)(2)-1,4-(OH)(2)-C(6)H(2) (1) and 2,5-(pyCH(2)CH(2)N[double bond, length as m-dash]CH)(2)-1,4-(OH)(2)-C(6)H(2) (2), respectively (py = 2-pyridyl). X-Ray quality crystals of both complexes were grown from their DMF solutions. The sterically more encumbered compound crystallizes in the form of discrete dinuclear entities with Cu(II) centres in a distorted square-planar ligand environment (one coordination site is occupied by a DMF molecule). The pyridyl derivative 4 features dinuclear hydroquinone-bridged subunits similar to 3. However, the Cu(II) ions are now six-coordinate with two DMF molecules at an axial and an equatorial position of a Jahn-Teller-distorted octahedron. Moreover, the dinuclear subunits are no longer isolated but linked with each other via bridging hydroquinone oxygen atoms which occupy the second apical position of each octahedron. The structure suggests that the magnetic properties of the resulting coordination polymer of 4 could be described by a model valid for dimerized spin chains. As a result of this analysis the antiferromagnetic coupling constants J(1)/k(B) = 9.9 K (intradimer) and J(2)/k(B) = 0.9 K (interdimer) are obtained. Both in 3 and in 4, the hydroquinone --> semiquinone transition of the central bridging unit (E degrees ' = + 0.57 V, 3; E degrees ' = + 0.51 V, 4; DMF; vs. SCE) displays features of chemical reversibility. In the case of , reduction of Cu(II) centres requires a peak potential of E(p) = - 0.42 V.     

Fluorescent nanoscale zinc(II)-carboxylate coordination polymers for explosive sensing

Fluorescent nanoscale coordination polymers with cubic morphology and long range ordered structure were fabricated and exhibited efficient sensing for both nitroaromatic explosive and nitromethane due to large surface area to volume ratio and strong binding affinity to explosive molecules.     

A novel selective fluorescent chemosensor for Cu（Ⅱ）

A novel fluorescence enhancement Cu~(2 ) chemosensor derived from coumarin was prepared.Emission study found that it exhibits evident Cu~(2 )-amplified fluorescence prior to Co~(2 ),Pb~(2 ),Mg~(2 ),Mn~(2 ),Ni~(2 ),Zn~(2 ),Fe~(3 ),Ag~ and Cd~(2 ),and the largest emission enhancement factor is about 9 at a ratio of 2:1 (chemosensor 1/Cu~(2 )).     

Malonato-bridged hexamethylenetetramine coordination polymers containing Mn(II) and Cu(II)

Two malonato-bridged hexamethylenetetramine coordination polymers, M₂(hmt)(H₂O)₂(mal)₂ [hmt?=?hexamethylenetetramine, mal?=?malonate(2-), M?=?Mn (1), Cu (2)] were prepared and structurally characterized. The isostructural complexes are orthorhombic, space group Imm2, with a?=?7.104(1), b?=?15.982(3), c?=?7.702(1)?Å, Z?=?2, D _calc?=?1.862?g?cm^?3(1) and a?=?6.962(3), b?=?15.500(7), c?=?7.627(3)?Å, Z?=?2, D _calc?=?2.047?g?cm^?3for 2. The transition metals are octahedrally coordinated by one nitrogen atom of an hmt ligand and five oxygen atoms of a water molecule and three malonate anions. The latter coordinate in chelating/bis-monodentate mode to give 2D layers with a (4,?4) topology, and which are pillared by bridging bidentate hmt ligands to generate an open 3D framework with channels extending in the [001] direction. Over the temperature range 5–300?K, 2 behaves paramagnetically, following the Curie–Weiss law χ_m(T???θ)?=?4.521(6)?cm³mol^?1K with a Weiss constant θ?=??4.8(2)?K.     

Preparation of an ion-imprinted fiber for the selective removal of Cu2+

A novel Cu(2+)-imprinted fiber (IIF) was prepared by grafting acrylic acid (AA) onto the surface of a polypropylene (PP) fiber and subsequently modified with polyethylenimine (PEI). An examination by infrared spectroscopy and scanning electron microscopy confirmed that the ion-imprinted polymer was successfully introduced onto the surface of a PP fiber. The modification of PP fibers with AA was beneficial to the grafting of PEI onto the fibers. The highest grafting degree of PEI could reach 120 wt % under optimal grafting conditions. This IIF showed excellent tensile and chemical stability in acid solution, which qualified the IIF for practical applications. Besides having a high adsorption capacity for Cu(2+) (120 mg/g), the IIF adsorbent showed a high selectivity for Cu(2+) as compared with that of the non-ion-imprinted fiber (NIF). The dynamic adsorption results indicated that IIF can thoroughly remove Cu(2+) from the solution in a relatively short contact time. The effective treatment volume was about 910 bed volumes. The selectivity coefficient of IIF for Cu(2+) with respect to Zn(2+) could reach 76.4. IIF also has good regeneration performance and could maintain almost the same adsorption capacity for copper ions after 10 adsorption-desorption cycles.     

A Novel Fluorescent Aminoacid Designed for Fluorometric Detection of Cu(II)

IntroductionIthasbeenwellknownthatα aminoacidcouldeffi cientlychelateCu(II) .1 3Applicationsbasedonthisnovelbindingcharacterhavebeenreported ,forinstance ,thechiraldiscriminationofD andL aminoacidsinaCu(II) cyclodextrincomplex4 ,5andtherecoveryofpyrenefluores cencebyaminoacidfromapyrene Cu (II) cyclodextrincomposite .6 ItwasthusenvisagedthatarationaldesignwouldleadtoanaminoacidderivativethatcouldworkasanovelligandforefficientdetectionofCu(II) .Acombina tionoftheaminoacidwithafluoropho…     

1D coordination polymers of Cu(II) and Cu(II) dimers with a dicyanomethanide ligand

Several new 1D coordination polymers have been synthesised using the anionic ligand carbamoyldicyanomethanide, C(CN)₂(CONH₂)⁻ (cdm). The polymeric complexes [Cu(cdm)₂(py)₂]·2MeOH (1), [Cu(cdm)₂(4-Etpy)₂]·2MeOH (2), [Cu(cdm)₂(3,5-Me₂pzH)₂]·2MeOH (3) and [Cu(cdm)₂(3-HOCH₂py)₂]·2MeOH (4) (py = pyridine; 3,5-Me₂pzH = 3,5-dimethylpyrazole) contain Cu(II) atoms bridged by μ₂-(N,N′) cdm ligands between equatorial and axial coordination sites. The use of monodentate co-ligands brings about polymeric products, in contrast to the use previously of chelating co-ligands which facilitate the formation of discrete products. These 1D polymeric complexes are connected by hydrogen bonding between the amide functionalities and the lattice solvent. In the structures of 3 and 4 the neutral ligands also contain hydrogen bond donor groups that supplement the amide ring motif. Two other complexes have been obtained that are polymeric chains of alkoxide-bridged Cu(II) dimers. The complexes [Cu(cdm)(MeO)(2-amp)] (5) and [Cu(cdm)(dmap)] (6) (2-amp = 2-(aminomethyl)pyridine and dmap = dimethylaminopropoxide) are remarkably similar despite the different ligands that they contain. Bridging between dimers is via μ₂-(N,O) cdm ligands, consequently altering the nature of the hydrogen bonding between adjacent chains compared to the simple polymeric species 1–3.     

Fluorescent Detection of Cu(Ⅱ) by Chitosan-based AIE Bioconjugate

Detection of Cu(Ⅱ) is very important in disease diagnose, biological system detection and environmental monitoring. Previously, we found that the product TPE-CS prepared by attaching the chromophores of tetraphenylethylene(TPE) to the chitosan(CS) chains showed excellent fluorescent properties. In this study, we tried to use TPE-CS for detecting Cu(Ⅱ) because of the stable complexation of CS with heavy metals and the luminosity mechanism of the Restriction of Intramolecular Rotations(RIR) for aggregation-induced emission(AIE)-active materials. The fluorescence intensity changed when TPE-CS was contacted with different metal ions, to be specific, no change for Na~+, slightly increase for Hg~(2+), Pb~(2+), Zn~(2+), Cd~(2+), Fe~(2+), Fe~(3+) due to the RIR caused by the complexation between CS and metal ions. However, for Cu~(2+), an obvious fluorescence decrease was observed because of the Photoinduced-Electron-Transfer(PET). Moreover, we found that the quenched FL intensity of TPE-CS was proportional to the concentration of Cu(Ⅱ) in the range of 5 μmol/L to 100 μmol/L, which provided a new way to quantitatively detect Cu(Ⅱ) . Besides, TPE-CS has excellent water-solubility as well as absorbability(the percentage of removal, R = 84%), which is an excellent detection probe and remover for Cu(Ⅱ) .     

A new selective fluorescence chemosensor for Cu(II) in water

A new chemosensor for the Cu(II) ion has been realized by connecting via an amido bond an anthracenyl residue to the all cis 2,4,6-triamino-1,3,5-trihydroxycyclohexane ligand (TACI). This sensor is able to detect micromolar concentrations of Cu(II) ions in water at pH 7 without interference with many other divalent transition metal ions.     

Solid phase selective separation and preconcentration of Cu(II) by Cu(II)-imprinted polymethacrylic microbeads

Ion-imprinted polymer (IIP) particles are prepared by copolymerization of methacrylic acid as monomer, trimethylolpropane trimethacrylate as crosslinking agent and 2,2′-azo-bis-isobutyronitrile as initiator in the presence of Cu(II), a Cu(II)-4-(2-pyridylazo)resorcinol (Cu(II)-PAR) complex, and PAR only. A batch procedure is used for the determination of the characteristics of the Cu(II) solid phase extraction from the IIP produced. The results obtained show that the Cu(II)-PAR IIP has the greatest adsorption capacity (37.4 μmol g⁻¹ of dry copolymer) among the IIPs investigated. The optimal pH value for the quantitative preconcentration is 7, and full desorption is achieved by 1 M HNO₃. The selectivity coefficients (S_Cu/Me) for Me = Ni(II), Co(II) are 45.0 and 38.5, respectively. It is established that Cu(II)-PAR IIPs can be used repeatedly without a considerable adsorption capacity loss. The determination of Cu(II) ions in seawater shows that the interfering matrix does not influence the preconcentration and selectivity values of the Cu(II)-PAR IIPs. The detection and quantification limits are 0.001 μmol L⁻¹ (3σ) and 0.003 μmol L⁻¹ (6σ), respectively.     

Fluorescent peptide sensor for the selective detection of Cu

A new fluorescent peptidyl chemosensor for Cu²⁺ ions with fluorescence resonance energy transfer (FRET) capabilities has been synthesized via Fmoc solid-phase peptide synthesis. The metal chelating unit, which is flanked by the fluorophores tryptophan (donor) and dansyl chloride (acceptor), consists of the amino acids glycine and aspartic acid (Gly-Gly-Asp-Gly-Gly-Asp-Gly-Gly-Asp-Gly-Gly-Asp-Gly-Gly). Coordination of the Cu²⁺ ions to the metal chelating unit results in fluorescent quenching of both the donor and acceptor fluorophores. Although it was determined that Cu²⁺ binding causes no change in FRET efficiency, emission and Cu²⁺-induced quenching of the acceptor dye can be used to monitor the concentration of the copper ions, with a detection limit of 32 μg L⁻¹. The sensor also demonstrated sensitivity, reversibility and selectivity towards Cu²⁺ in a transition metal matrix at pH 7.0.     

红移型Cu(II)离子比率荧光探针的光物理性质

应用密度泛函理论(DFT)及含时密度泛函理论(TDDFT)方法研究了N-丁基-4,5-二[2-(苯胺基)乙胺基]-l,8萘酰亚胺红移型铜离子比率荧光探针的光物理性质. 通过探针分子与金属离子结合前后的几何构型优化, 结合自然键轨道分析, 揭示了探针分子对铜离子的识别作用. 通过激发态计算阐明了光诱导分子内电荷转移(ICT)机理. 研究结果表明, 由于Cu(II)离子络合导致萘胺脱氢, 带负电荷的胺基N原子与萘环形成C＝N双键,延长了共轭体系; N的非键电子向Cu(II)离子的空d轨道转移一个电子, 抑制了Cu(II)离子的顺磁效应所导致的荧光淬灭, 受光激发后, 共轭N与萘环之间发生n→π^*电子转移导致ICT效应和荧光红移.     

Synthesis and characterization of novel ion-imprinted polymeric nanoparticles for very fast and highly selective recognition of copper(II) ions

This work reports the preparation of new Cu²⁺ ion-imprinted polymeric nanoparticles using 1-hydroxy-4-(prop-2′-enyloxy)-9,10-anthraquinone (AQ) as a vinylated chelating agent. The Cu²⁺ ion found to form a stable 1:1 complex with AQ in methanol solution. The resulting Cu²⁺-AQ complex was copolymerized with ethyleneglycol dimethacrylate, as a cross-linking monomer, via precipitation polymerization method. The imprint copper ion was removed from the polymeric matrix using a 0.1 mol L⁻¹ HNO₃ solution. The Cu²⁺-imprinted polymeric nanoparticles were characterized by IR spectroscopy, scanning electron microscopy (SEM) and N₂ adsorption-desorption isotherms. The SEM micrographs showed colloidal nanoparticles of 60-100 nm in diameter and slightly irregular in shape. Optimum pH for maximum sorption was 7.0. Sorption and desorption of Cu²⁺ ion on the IIP nanoparticles were quite fast and achieved completely over entire investigated time periods of 2-30 min. Maximum sorbent capacity and enrichment factor of the prepared IIP for Cu²⁺ were 73.8 μmol g⁻¹ and 56.5, respectively. The relative standard deviation and limit of detection (C_LOD = 3S_b/m) of the method were evaluated as 2.6% and 0.1 ng mL⁻¹, using inductively coupled plasma-atomic emission spectrometry, respectively. It was found that the imprinting technology results in increased affinity of the prepared material toward Cu²⁺ ion over other metal ions with the same charge and close ionic radius. The relative standard deviations for six and twenty replicates with the same nanoparticles were found to be 1.7% and 2.1%, respectively.     

Fluorescent coumarinyldithiane as a selective chemodosimeter for mercury(II) ion in aqueous solution

A coumarin-based dithiane (1) was synthesized for the selective detection of Hg²⁺ with respect to dual chromo- and fluorogenic changing events in an aqueous solution by the mercury-promoted transformation of a dithiane group into an aldehyde functional unit. The Hg²⁺-selective response of the chemodosimeter was clearly observed in aqueous buffer as well as in human blood plasma medium.     

Fluorescent sensing and selective Pb(II) extraction by a dansylamide ion-exchanger

The (bis)dansylated sulfonamide 1,2-C6H4(NHSO2C10H6-5-N(CH3)2)2 (1) extracted Pb(II) selectively from water into 1,2-dichloroethane via an ion-exchange mechanism and showed fluorescence quenching upon Pb(II) extraction. The distribution ratios for metal extraction (determined by ICP-MS) for Pb(II) were 133-1410 times higher than those for other metal cations [Co(II), Ni(II), Cu(II), Zn(II), and Cd(II)] under identical conditions. Fluorescence quenching was observed upon Pb(II) extraction, which was dependent on Pb(II) concentration. The monodansylated control, C6H5NHSO2C10H6-5-N(CH3)2 (2), showed neither extraction nor quenching, indicating that the fluorescence effects are a direct result of Pb coordination to 1. The observed selectivity for Pb(II) is ascribed to the formation of a low-coordinate binary Pb(II)-Sulfonamido complex in the organic phase.     

Enhanced hydrolytic activity of Cu(II) and Zn(II) complexes in highly cross-linked polymers

The chelate ligand tris[(1-vinylimidazol-2-yl)methyl]amine (5) was synthesized in five steps from commercially available starting materials. Upon reaction with ZnCl2 or CuCl2 in the presence of NH4PF6, the complexes [Zn5Cl]PF6 (6) and [Cu5Cl]PF6 (7) were obtained. The structure of both complexes was determined by single-crystal X-ray crystallography. Immobilization of 6 and 7 was achieved by co-polymerization with ethylene glycol dimethacrylate. The supported complexes P6-Zn and P7-Cu were found to be efficient catalysts for the hydrolysis of bis(p-nitrophenyl)phosphate (BNPP) at 50 degrees C. At pH 9.5, the heterogeneous catalyst P7-Cu was 56 times more active than the homogeneous catalyst 7. Partitioning effects, which increase the local concentration of BNPP in the polymer, are shown to contribute to the enhanced activity of the immobilized catalyst.     

Highly selective ratiometric fluorescent sensor for Cu(II) with two urea groups

A new Naphthalene derivative with two urea groups, 1,8-bis[N-(o-methoxyphenyl)ureido]naphthalene (BMPUN), was synthesized for detecting Cu(II) ratiometrically. Complexation between urea groups of BMPUN and Cu(II) with high selectivity gives rise to a great red-shift from 380 to 440 nm in the emission spectra. The introduction of electron donating groups is helpful to increase the electron density of the nitrogen atom of urea groups and then enhance the ability of complexation for Cu(II).     

Silica gel surface modified with sulfanilamide for selective solid-phase extraction of Cu(II), Zn(II) and Ni(II)

A new chelating matrix has been prepared by immobilising sulfanilamide (SA) on silica gel (SG) surface modified with 3-chloropropyltrimethoxysilane as a sorbent for the solid-phase extraction (SPE) Cu(II), Zn(II) and Ni(II). The determination of metal ions in aqueous solutions was carried out by inductively coupled plasma optical emission spectrometry (ICP-OES). Experimental conditions for effective sorption of trace levels of Cu(II), Zn(II) and Ni(II) were optimised with respect to different experimental parameters using the batch and column procedures. The presence of common coexisting ions does not affect the sorption capacities. The maximum sorption capacity of the sorbent at optimum conditions was found to be 34.91, 19.07 and 23.62 mg g^?1 for Cu(II), Zn(II) and Ni(II), respectively. The detection limit of the method defined by IUPAC was found to be 1.60, 0.50 and 0.61 µg L^?1 for Cu(II), Zn(II) and Ni(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 4.0% (n = 8). The method was applied to the recovery of Cu(II), Zn(II) and Ni(II) from the certified reference material (GBW 08301, river sediment) and to the simultaneous determination of these cations in different water samples with satisfactory results.