Analysis of micro-contact printed protein patterns by SPR imaging with a LED light source

We demonstrate the characterization of mu-contact printed protein patterns and analysis of protein-protein interactions by two-dimensional (2-D) surface plasmon resonance imaging (SPRi). Advancements in SPRi image quality from employing a light emitting diode (LED) as the light source are described. We show that a LED offers an ideal point source that can eliminate interference artifacts and speckles found when using a laser source. The attainable thickness resolution in fixed-angle imaging is comparable to that of a monochromatic source, providing a solid foundation for quantitative analysis with the system. The SPR imaging technique reported here affords sub-nanometer thickness sensitivity and micrometer lateral resolution, allowing for convenient studies of biomolecular interactions and surface morphologies of ultrathin films. Spatially well-defined protein patterns of bacterial toxins were obtained by microcontact printing using a polydimethylsiloxane (PDMS) stamp on a functionalized self-assembled monolayer on Au. The influence of protein concentration in the inking solution on transfer efficiency was investigated, and a nonlinear correlation was observed between the solution concentration and the amount of protein immobilized on the surface. Quantitative analysis of protein interaction was performed with toxin-specific antibody, showing a concentration-dependent relationship that verifies the retention of biological activity of the protein after printing. The study demonstrates the feasibility and effectiveness of using LEDs as light sources in SPR imaging, opening doors for developing compact SPR instruments for direct, sensitive, and label-free detection of biohazardous molecules.     

A self-assembled fusion protein-based surface plasmon resonance biosensor for rapid diagnosis of severe acute respiratory syndrome

A surface plasmon resonance (SPR)-based biosensor was developed for simple diagnosis of severe acute respiratory syndrome (SARS) using a protein created by genetically fusing gold binding polypeptides (GBPs) to a SARS coronaviral surface antigen (SCVme). The GBP domain of the fusion protein serves as an anchoring component onto the gold surface, exploiting the gold binding affinity of the domain, whereas the SCVme domain is a recognition element for anti-SCVme antibody, the target analyte in this study. SPR analysis indicated the fusion protein simply and strongly self-immobilized onto the gold surface, through GBP, without surface chemical modification, offering a stable and specific sensing platform for anti-SCVme detection. AFM and SPR imaging analyses demonstrated that anti-SCVme specifically bound to the fusion protein immobilized onto the gold-micropatterned chip, implying that appropriate orientation of bound fusion protein by GBP resulted in optimal exposure of the SCVme domain to the assay solution, resulting in efficient capture of anti-SCVme antibody. The best packing density of the fusion protein onto the SPR chip was achieved at the concentration of 10 μg mL⁻¹; this density showed the highest detection response (906 RU) for anti-SCVme. The fusion protein-coated SPR chip at the best packing density had a lower limit of detection of 200 ng mL⁻¹ anti-SCVme within 10 min and also allowed selective detection of anti-SCVme with significantly low responses for non-specific mouse IgG at all tested concentrations. The fusion protein provides a simple and effective method for construction of SPR sensing platforms permitting sensitive and selective detection of anti-SCVme antibody.     

Influence of antibody immobilization strategy on molecular recognition force microscopy measurements

A systematic evaluation of the effects of antibody immobilization strategy on the binding efficiency and selectivity (e.g., ability to distinguish between specific and nonspecific interactions) of immunosurfaces prepared with F(ab') antibody fragments of rabbit Immunoglobulin G (IgG) is described. F(ab') was attached to gold surfaces either (1) directly via the formation of a gold-thiolate bond or (2) indirectly through a series of a bifunctional linkers containing an alkane chain or ethylene glycol spacer. Immobilization of F(ab') via the sulfhydryl reactive group located opposite the antigen binding site ensured optimum orientation of the antigen binding site. X-ray photoelectron spectroscopy (XPS) and surface plasmon resonance (SPR) were used to confirm surface modification with the bifunctional linkers and antibody immobilization, respectively. Binding efficiency assays performed with SPR indicated that increasing the length of the linker increased the antigen binding efficiency. Atomic force microscopy (AFM) adhesion force measurements indicated that AFM probes functionalized with directly immobilized F(ab') more effectively discriminated between specific and nonspecific surface-bound proteins than probes modified indirectly via linker-immobilized F(ab'). In addition, a greater number of antibody-antigen binding events were observed with directly immobilized F(ab')-functionalized probes.     

Fabrication of DNA-protein conjugate layer on gold-substrate and its application to immunosensor

The fabrication of antibody thin film using both protein G and oligonucleotide was carried out by self-assembly (SA) technique for immunosensor. A mixture of 11-mercaptoundecanoic acid (MUA) and oligonucleotide with thiol (SH) end group was self-assembled of gold (Au) surface for two-dimensional (2D) configuration. Protein G was chemically adsorbed on the 11-MUA surface, and then the antibody was immobilized on the protein G region. On the immobilized single-stranded DNA, the complementary DNA–antibody conjugate was hybridized for the oriented immobilization of antibody. The formation of self-assembled 11-MUA/oligonucleotide layer, protein G immobilization, antibody layer, and antigen binding was investigated using surface plasmon resonance (SPR). The topographies of the fabricated surfaces were observed by atomic force microscopy (AFM). When compared with the amount of antigen binding on the antibody thin film fabricated by protein G only, the proposed biosurface fabricated with both protein G and oligonucleotide showed better binding capacity, which implicates the improvement of the detection limit.     

Effect of surface proteins on Staphylococcus epidermidis adhesion and colonization on silicone

Shunt infections are one of the most serious complications in shunt implant surgery. Previous studies have suggested that cerebrospinal fluid (CSF) proteins could affect bacterial adhesion and subsequent shunt infection. A systematic study using immobilized protein on the surface of silane-modified silicone was conducted to determine how these modifications influenced Staphylococcus epidermidis adhesion and colonization. A comparison was also made with silicone having physically adsorbed protein. A colony-counting adhesion assay and scanning electron microscopy (SEM) were used to provide quantitative analysis of bacterial adhesion and semi-quantitative analysis of bacterial colonization, respectively. In order to determine the appropriate silanization process for effective protein immobilization, the effect of bovine serum albumin (BSA) immobilized on n-3-(trimethoxysilyl)propyl-ethylenediamine (AEAPS)/silicone, aminopropyltriethoxysilane (APTMS)/silicone, 3-(glycidyloxypropyl)trimethoxysilane (GPTMS)/silicone, and octadecyltrichlorosilane (OTS)/silicone on bacterial adhesion was investigated. Upon identifying that OTS is the most effective silane, different types of proteins, including: BSA, human serum albumin (HSA), gamma-globulin, and fibrinogen were immobilized on OTS/silicone by a photo-immobilization method. Immobilized protein on modified silicone surfaces was found to be stable in saline for 30 days, while physically adsorbed protein showed instability within hours as determined by contact angle measurements and X-ray photoelectron spectroscopy (XPS). For HSA/OTS/silicone, BSA/OTS/silicone, gamma-globulin/OTS/silicone, fibrinogen/OTS/silicon, and physically absorbed BSA on silicone, the contact angles were 78.5 degrees, 80.7 degrees, 78.9 degrees, 81.3 degrees, and 96.5 degrees; and the amount of nitrogen content was found to be 4.6%, 5.0%, 5.6%, 7.2%, and 3.2%, respectively. All protein immobilized on OTS/silicone surfaces significantly reduced bacterial adhesion by around 75% compared to untreated silicone, while physically adsorbed BSA on silicone reduced by only 29.4%, as determined by colony-counting adhesion assay. However, there was no significant difference on bacterial adhesion among the different types of proteins immobilized on OTS/silicone. Minimizing bacterial adhesion and colonization can be attributed to the increased concentration of -NH2 group, and stability and more hydrophilic nature of the protein/OTS/silicone surfaces.     

Arg–Cys and Arg–cysteamine adsorbed on gold and the G-protein–adsorbate interaction

The dipeptide, Arg–Cys, and the related molecule, Arg–cysteamine, are adsorbed to gold surfaces and the monolayers are characterized. Chemical binding and electronic structure of the monolayers are obtained by X-ray photoelectron spectroscopy (XPS). Strong molecular binding of the adsorbates to gold surface through the sulfur atom is attained. Orientation of the adsorbates on gold is studied using infrared reflection absorption spectroscopy (IRAS). Arg–Cys is interpreted to be adsorbed on gold in a compact configuration. The Arg–cysteamine molecule is adsorbed on gold with the main molecular axis perpendicular to the surface. Interaction of G-protein with the adsorbates was studied using the surface plasmon resonance (SPR) technique. It is believed that arginine has a major role in G-protein recognition since the G-protein-coupled receptor (GPCR) ₂A has an arginine-rich region in the G-protein-binding part of the third intracellular loop.     

Assembly of bionanostructures onto beta-cyclodextrin molecular printboards for antibody recognition and lymphocyte cell counting

The assembly of complex bionanostructures onto beta-cyclodextrin (betaCD) monolayers has been investigated with the aims of antibody recognition and cell adhesion. The formation of these assemblies relies on host-guest, protein-ligand, and protein-protein interactions. The buildup of a structure consisting of a divalent bis(adamantyl)-biotin linker, streptavidin (SAv), biotinylated protein A (bt-PA), and an Fc fragment of a human immunoglobin G (IgG-Fc) was studied with surface plasmon resonance (SPR) spectroscopy. Patterns of this bionanostructure were obtained via microcontact printing of the divalent linker at the molecular printboard, followed by the subsequent attachment of the proteins. Fluorescence microscopy showed that the buildup of these bionanostructures on the betaCD monolayers is highly specific. On the basis of these results, bionanostructures were made in which whole antibodies (ABs) were used instead of the IgG-Fc. These ABs were bound to the SAv layer via biotinylated protein G (bt-PG) or via a biotinylated AB. These constructions yielded specifically bound ABs with a less than maximal density, as shown by SPR spectroscopy and atomic force microscopy (AFM). Finally, the immobilization of ABs to the molecular printboard was used to create platforms for lymphocyte cell count purposes. Monoclonal ABs (MABs) were attached to the SAv layer using bt-PG, an engineered biotin functionality, or through nonspecific adsorption. The binding specificity of the immobilized cells was the highest on the buildup made from bt-PG, which is attributed to an optimized orientation of the antibodies. An approximately linear relationship between the numbers of seeded cells and counted cells was demonstrated, rendering the platform potentially suitable for lymphocyte cell counting.     

Surface plasmon resonance and electrochemistry characterization of layer-by-layer self-assembled DNA and Zr4+ thin films, and their interaction with cytochrome c

Through electrostatic layer-by-layer (LbL) assembly, negatively charged calf thymus double stranded DNA (CTds-DNA), and positively charged Zr⁴⁺ ions were alternately deposited on gold substrate modified with chemisorbed cysteamine. Thus-prepared three-dimensional DNA networks were characterized by surface plasmon resonance (SPR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and infrared reflection-absorption spectroscopy (IR-RAS). SPR spectroscopy indicates that the effective thickness of DNA monolayer in the (DNA/Zr⁴⁺)₁ bilayer was 1.5 ± 0.1 nm, which corresponds to the surface coverage of 79% of its full packed monolayer. At the same time, a linear increase of film thickness with increasing number of layers was also confirmed by SPR characterizations. The data of XPS and IR-RAS show that Zr⁴⁺ ions interact with both the phosphate groups and nitrogenous bases of DNA and load into the framework of DNA. Furthermore, the interactions between this composite film and heme protein cytochrome c (Cyt c) were investigated by SPR spectroscopy and electrochemistry. Compared with the adsorption of Cyt c on DNA monolayer, this composite multilayer film can obviously enhance the amount of immobilized Cyt c confirmed by SPR reflectivity-incident angle (R-θ) curves. Cyclic voltammetry (CV) indicates the Cyt c adsorbed on the composite film is electroactive, and the enhancement of peak current in CV indirectly verifies the increase of the amount of immobilized Cyt c.     

Anchoring of histidine-tagged proteins to molecular printboards: self-assembly, thermodynamic modeling, and patterning

In this paper the multivalent binding of hexahistidine (His6)-tagged proteins to beta-cyclodextrin (beta-CD) self-assembled monolayers (SAMs) by using the nickel(II) complex of a hetero-divalent orthogonal adamantyl nitrilotriacetate linker (4) is described. Nonspecific interactions were suppressed by using monovalent adamantyl-hexa(ethylene glycol) derivative 3. With the mono-His6-tagged maltose binding protein (His6-MBP), thermodynamic modeling based on surface plasmon resonance (SPR) titration data showed that the MBP molecules in solution were linked, on average, to Ni.4 in 1:1 stoichiometry. On the surface, however, the majority of His(6)-MBP was complexed to surface-immobilized beta-CDs through three Ni.4 complexes. This difference is explained by the high effective beta-CD concentration at the surface and is a new example of supramolecular interfacial expression. In a similar adsorption scheme, SPR proved that the alpha-proteasome could be attached to beta-CD SAMs in a specific manner. Patterning through microcontact printing of (His6)4-DsRed-fluorescent timer (DsRed-FT), which is a tetrameric, visible autofluorescent protein, was carried out in the presence of Ni.4 Fluorescence measurements showed that the (His6)4-DsRed-FT is bound strongly through Ni.4 to the molecular printboard.     

Comparative study of random and oriented antibody immobilization as measured by dual polarization interferometry and surface plasmon resonance spectroscopy

Dual polarization interferometry (DPI) is used for a detailed study of antibody immobilization with and without orientation control, using prostate specific antigen (PSA) and its antibody as model. Thiol modified DPI chips were activated by a heterobifunctional cross-linker (sulfo-GMBS). PSA antibody was either directly immobilized via covalent binding or coupled via the Fc-fragment to protein G covalently attached to the activated chip. The direct covalent binding leads to a random antibody orientation and the coupling through protein G leads to an end-on orientation. Ethanolamine (ETH) was used to block remaining active sites following the direct antibody immobilization and protein G immobilization. A homobifunctional cross-linker (BS3) was used to stabilize the antibody layer coupled on protein G. DPI provides a real-time measurement of the stepwise molecular binding processes and gives detailed geometrical and structural values of each layer, i.e., thickness, mass, and density. These values evidence the end-on orientation of closely packed antibody on protein G layer and reveal structural effects of ETH blocking/deactivation and BS3 stabilization. With the end-on immobilized antibody, PSA at 10 pg/mL can be detected by DPI through a sandwich complex that satisfies the clinical requirement (assuming <30 pg/mL as clinically safe). However, the randomly immobilized antibody failed to detect PSA at 1 ng/mL. In a parallel study using surface plasmon resonance (SPR) spectroscopy, random and end-on antibody immobilization on streptavidin-modified gold surface was evaluated to further validate the importance of antibody orientation control. With the closely packed antibody layer on protein G surface, SPR can also detect PSA at 10 pg/mL.     

Transmission surface-plasmon resonance (T-SPR) measurements for monitoring adsorption on ultrathin gold island films

Evaporation of ultrathin (1.3-10 nm nominal thickness) gold films onto quartz or mica leads to the formation of a layer of rather uniform gold islands on the transparent support. The morphology of ultrathin gold island films of various thicknesses was studied by using atomic force microscopy (AFM) and scanning electron microscopy (SEM) imaging. The surface plasmon (SP) absorption characteristic of such films is highly sensitive to the surrounding medium, with the plasmon band changing in intensity and wavelength upon binding of various molecules to the surface. The binding process can be monitored quantitatively by measuring the changes in the gold SP absorption, by using transmission UV/Vis spectroscopy. The method, termed transmission surface plasmon resonance (T-SPR) spectroscopy, is shown to be applicable to both chemically and physically adsorbed molecules, in liquid or gas phase, with measurements carried out either ex situ or in situ (real-time measurements) using a variety of molecular probes. Binding to a preformed molecular layer on the Au surface produces a similar response, suggesting the possible use of T-SPR for selective sensing. The sensitivity of T-SPR spectroscopy in detecting molecular binding to the gold depends strongly on the film preparation conditions, and may be comparable to that obtained in surface plasmon resonance (SPR) sensing.     

Printing biomacromolecules on a bovine serum albumin precursor layer

Various biomacromolecules including proteins and polysaccharides are printed on a substrate capped with a bovine serum albumin (BSA) precursor layer to create clear co-patterns of these molecules. Characterizations by confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM) demonstrate the successful production and clear boundaries of the co-patterns. Rinsing the BSA-adsorbed substrate and the biomacromolecules-inked stamp before microcontact printing (microCP) is crucial for the creation of clear and stable co-patterns. The patterns are mainly stabilized by electrostatic interactions and van der Waals forces. Characterizations by ellipsometry, UV-Vis and fluorescence spectroscopy reveal that printing by a flat PDMS stamp yields a denser layered structure of proteins with a higher amount than that of adsorbed proteins. By printing, however, a lower enzymatic catalytic activity for horseradish peroxidase (HRP) or binding capability for avidin (both normalized to amount) is determined. A conformational transition from alpha-helix to beta-sheet of HRP is observed by ATR-IR. By contrast, a BSA precursor layer can effectively improve the functionality of the printed HRP or avidin and preserve the original conformation of the proteins, although the absolute transferred amount of these proteins is decreased.     

Comparative Assessment of Oriented Antibody Immobilization on Surface Plasmon Resonance Biosensing

Protein A and protein G are extremely useful molecules for the immobilization of antibodies. However, there are limited comparative reports available to evaluate their immobilization performance for use as biosensors. In this study, a comparative analysis was made of approaches that use protein A and protein G for avian leukosis virus detection. The antibody‐protein binding affinities were determined using surface plasmon resonance (SPR) analysis. The immobilization efficiency was obtained by calculating the number of the protein molecular binding sites. The positive influence of sensor response on antigen detection indicates that the amount of immobilized antibody plays a major role in the extent of immobilization. Moreover, the biosensors constructed using both proteins were found to be regenerative. The SPR results from this study suggest that the surfaces of protein G provide a better equilibrium constant and binding efficacy for immobilized antibodies, resulting in enhanced antigen detection.     

基于表面等离子体子共振的白蛋白免疫传感器的研究

采用自行组装的全波长表面等离子体子共振(SPR)传感装置,以对金和蛋白抗体均有较强吸附作用的A蛋白作为基底膜,测试了A蛋白在金膜表面结合的动力学常数,其结果为2.3×10⁵L/(mol·s).研究了在A蛋白基底膜上白蛋白抗体的定向自组装程度和速率.观测了白蛋白抗体与抗原之间免疫反应的动力学过程,并优化了实验条件.结果表明,白蛋白抗原的浓度在0.02～10mg/mL范围内与信号的响应值呈良好的线性关系.将此SPR传感器用于糖尿病肾病患者尿蛋白的检测,结果较好.     

Highly protein-resistant coatings from well-defined diblock copolymers containing sulfobetaines

Three well-defined diblock copolymers of poly(sulfobetaine methacrylate) [poly(SBMA)] and poly(propylene oxide) (PPO) were synthesized by the sequential addition of SBMA monomer to fixed amounts of PPO using an atom transfer radical polymerization method and varying poly(SBMA) lengths. These copolymers were characterized by 1H NMR and aqueous gel permeation chromatography. These copolymers were physically adsorbed onto a surface plasmon resonance (SPR) sensor surface covered by methyl-terminated self-assembled monolayers, followed by the in situ evaluation of protein adsorption on the adsorbed copolymers. It is found that the behavior of the protein adsorption depends on the molecular weight of the copolymers. Results show that the diblock copolymers containing poly(SBMA) can be highly protein resistant when surface SBMA densities are well controlled. Thus, copolymers containing zwitterionic groups are ideal for resisting protein adsorption when the surface density of zwitterionic groups is controlled.     

Microchannel chips for the multiplexed analysis of human immunoglobulin G–antibody interactions by surface plasmon resonance imaging

We report the multiplexed, simultaneous analysis of antigen–antibody interactions that involve human immunoglobulin G (IgG) on a gold substrate by the surface plasmon resonance imaging method. A multichannel, microfluidic chip was fabricated from poly(dimethylsiloxane) (PDMS) to selectively functionalize the surface and deliver the analyte solutions. The sensing interface was constructed using avidin as a linker layer between the surface-bound biotinylated bovine serum albumin and biotinylated anti-human IgG antibodies. Four mouse anti-human IgG antibodies were selected for evaluation and the screening was achieved by simultaneously monitoring protein–protein interactions under identical conditions. Antibody–antigen binding affinities towards human immunoglobulin were quantitatively compared by employing Langmuir adsorption isotherms for the analysis of SPRi responses obtained under equilibrium conditions. We were able to identify two IgG samples with higher affinities towards the target, and the determined binding kinetics falls within the typical range of values reported in the literature. Direct measurement of proteins in serum samples by SPR imaging was achieved by developing methods to minimize nonspecific adsorption onto the avidin-functionalized surface, and a limit of detection (LOD) of 6.7 nM IgG was obtained for the treated serum samples. The combination of SPR imaging and multichannel PDMS chips offers convenience and flexibility for sensitive and label-free measurement of protein–protein interactions in complex conditions and enables high-throughput screening of pharmaceutically significant molecules. Figure Microchannel SPR imaging for protein–protein interactions     

Study of (TPP)H_2 Vapor Deposited Film on Iron

IntroductionCorrosioninhibitionofmetalsdependsupontheinhibitor'sabilityofformingbondstothemetalatomorionsofthesubstrate.Aporphyrinringligandpossessespowerfulcoordinationcapabilitytomanymetalionsthroughitsfournitrogenatoms.Additionally,someofthecoordinatedcefltered-metalionscanacceptanotheroneortWoligandstoformtheaxialcomplexes'-'.Athoughsomecorrosionsciefltistshavebeeninterestedininvestigatingthepotentialityofporphyrins(metal-freeporphyrins)ormetalporphyrinsasinhibitors,theinhibitedfilmsorinh…     

Development of a metal-chelated plasmonic interface for the linking of His-peptides with a droplet-based surface plasmon resonance read-off scheme

Monolayers of metal complexes were covalently attached to the surface of lamellar SPR interfaces (Ti/Ag/a-Si(0.63)C(0.37)) for binding histidine-tagged peptides with a controlled molecular orientation. The method is based on the activation of surface acid groups with N-hydroxysuccinimide (NHS), followed by an amidation reaction with (S)-N-(5-amino-1-carboxypentyl)iminodiacetic acid (NTA). FTIR and X-ray photoelectron spectroscopy (XPS) were used to characterize each surface modification step. The NTA modified SPR interface effectively chelated Cu(2+) ions. Once loaded with metal ions, the modified SPR interface was able to bind specifically to histidine-tagged peptides. The binding process was followed by surface plasmon resonance (SPR) in a droplet based configuration. The Cu(2+)-NTA modified interface showed protein loading comparable to commercially available NTA chips based on dextran chemistry and can thus be regarded as an interesting alternative. The sensor interface can be reused several times due to the easy regeneration step using ethylenediaminetetraacetic acid (EDTA) treatment.     

Surface plasmon resonance-enabled mass spectrometry arrays

Biosensors that utilize surface plasmon resonance (SPR) as a method of detection of protein interactions can be used for selective separation of proteins prior to MS analysis. The combination of SPR and MS results in a unique multiplexed detection technology capable of both quantitative and qualitative protein analysis. To further the development of a high-throughput SPR-MS approach, the possibility of arraying binding ligands on SPR chips for affinity capture of proteins and their MS analysis was explored. Antibodies to beta-2-microglobulin, cystatin C, transferrin, and insulin-like growth factors I and II were arrayed on a large number of SPR chips. Human plasma samples were injected over the antibody array chips in an SPR Biosensor, after which on-chip MS analysis was performed to detect the bound proteins. Signals from the targeted proteins were observed for each antibody-derivatized chip, indicating successful antibody immobilization and protein capture. The SPR-MS arrays are robust, highly reproducible, and are capable of high-throughput analysis.     

Protein-directed assembly of binary monolayers at the interface and surface patterns of protein on the monolayers

Ferritin-directed assembly of binary monolayers of zwitterionic dipalmitoylphosphatidylcholine and cationic dioctadecyldimethylammonium bromide (DOMA) at the interface and surface patterns of ferritin on the monolayers have been investigated using a combination of infrared reflection absorption spectroscopy, surface plasmon resonance, and atomic force microscopy. Ferritin binding to the binary monolayers at the air-water interface at the surface pressure 30 mN/m, primarily driven by the electrostatic interaction, gives rise to a change in tilt angle of hydrocarbon chains from 15 degrees +/- 1 degrees to 10 degrees +/- 1 degrees with respect to the normal of the monolayer at the mole fraction of DOMA (XDOMA) of 0.1. The chains at XDOMA = 0.3 are oriented vertical to the water surface before and after protein binding. A new mechanism for protein binding to the binary monolayers is proposed. The secondary structures of the adsorbed ferritin are prevented from changing to some extent due to the existence of the monolayers. The amounts of the bound protein on the monolayers at the air-water interface are increased in comparison with those on the pre-immobilized monolayers at low XDOMA. The increased amounts and different patterns of the adsorbed protein at the monolayers are mostly attributed to the formation of multiple binding sites available for ferritin, which is due to the lateral reorganization of the lipid components in the monolayers induced by the protein in the subphase. The created multiple binding sites on the monolayer surfaces through the protein-directed assembly can be preserved for subsequent protein binding.