Linear scaling of the interlayer relaxations of the vicinal Cu(p,p,p − 2) surfaces with the number of atom-rows in the terraces

We investigate the multilayer relaxation trends in the vicinal Cu(p,p,p − 2) surfaces employing the all-electron full-potential linearized augmented plane-wave method. Calculations are performed for the (3 3 1), (2 2 1), (5 5 3), (3 3 2), (7 7 5), and (4 4 3) surfaces, which have 3, 4, 5, 6, 7, and 8 atom-rows in the terrace, respectively. The following trends are identified: (i) The interlayer relaxations perpendicular to the surface scale almost linearly with the number of atom-rows in the terraces. (ii) The nearest-neighbor distances do not depend on the surface termination, but only on the local coordination. (iii) For Cu(p,p,p − 2) in which the topmost n surface layers have nearest-neighbor coordination smaller than the bulk Cu (calculated for the unrelaxed surfaces), the topmost (n − 1) interlayer spacings (d₁₂, … , d_n−1,n) contract compared with the unrelaxed spacing, while the nth interlayer spacing (d_n,n+1) expands. The next (n − 2) interlayer spacings (d_n+1,n+2, … , d_{2n−2,2n−1}) contract, while the interlayer spacing indicated by d_2n−1,2n expands. A similar rule was found for the relaxations parallel to the surfaces. These trends provide a better understanding of the atomic structure of vicinal Cu surfaces.     

Magnetic ordering of Vn/Mo(0 0 1) systems: Ab-initio calculations

A density-functional theory (DFT) study is performed using a full-potential linearized-augmented-plane-waves (FP-LAPW) method to investigate the magnetic structure of vanadium-molybdenum systems (V_n/Mo(0 0 1), n = 1, 2). The topmost V layers relax inward in both systems with a larger contraction in V₂/Mo(0 0 1) system. A p(1 × 1) in-plane ferromagnetic ordering with appreciable magnetic moments is obtained on V overlayers, which is found to be the ground state in both systems. The layers below the surface exhibit induced magnetism with antiferromagnetic interlayer coupling.     

Structure and magnetic properties of Fe4/Cun (n=2,4) superlattices from first-principles study

The structures and magnetic properties of Fe4/Cun (n=2, 4) superlattices have been investigated by the first-principles pseudopotential plane-wave method based on spin density approximation. Compared with the ideal fcc-Cu bulk structure, for the optimized Fe4/Cu2 model, obvious contraction of interlayer distances occurs on the interior Fe layers, whereas the interlayer distances of Fe layers in Fe4/Cu4 are expanded. The anti-parallel alignment magnetic moment and negative polarization of the interior Fe layer have been found in the Fe4/Cu2 model. This can be explained in terms of the magnetic-volume effect, and the moment of anti-parallel alignment attributes to the contracted interlayer distances between the interior Fe layers. The MR ratio has also been evaluated by means of the two-current model. The MR ratio of the Fe4/Cu2 model (4.89%) is much small than that of the Fe4/Cu4 one (23.65%).     

Density functional theory study of AunMn(n=1-8) clusters

Equilibrium geometries, relative stabilities, and magnetic properties of small Au_nMn (n=1-8) clusters have been investigated using density functional theory at the PW91P86 level. It is found that Mn atoms in the ground state Au_nMn isomers tend to occupy the most highly coordinated position and the lowest energy structure of Au_nMn clusters with even n is similar to that of pure Au_n+1 clusters, except for n=2. The substitution of Au atom in Au_n+1 cluster by a Mn atom improves the stability of the host clusters. Maximum peaks are observed for Au_nMn clusters at n=2, 4 on the size dependence of second-order energy differences and fragmentation energies, implying that the two clusters possess relatively higher stability. The HOMO-LUMO energy gaps of the ground state Au_nMn clusters show a pronounced odd-even oscillation with the number of Au atoms, and the energy gap of Au₂Mn cluster is the biggest among all the clusters. The magnetism calculations indicate that the total magnetic moment of Au_nMn cluster, which has a very large magnetic moment in comparison to the pure Au_n+1 cluster, is mainly localized on Mn atom.     

Structural properties and diffusion processes of the Cu3Au (0 0 1) surface

The surface relaxation and surface energy of both the mixed AuCu and pure Cu terminated Cu₃Au (0 0 1) surfaces are simulated and calculated by using the modified analytical embedded-atom method. We find that the mixed AuCu termination is energetically preferred over the pure Cu termination thereby the mono-vacancy diffusion is also investigated in the topmost few layers of the mixed AuCu terminated Cu₃Au (0 0 1) surface. In the mixed AuCu terminated surface the relaxed Au atoms are raised above Cu atoms for 0.13 Å in the topmost layer. All the surface atoms displace outwards, this effect occurs in the first three layers and changes the first two inter-layer spacing. For mono-vacancy migration in the first layer, the migration energies of Au and Cu mono-vacancy via two-type in-plane displace: the nearest neighbor jump (NNJ) and the second nearest neighbor jump (2NNJ), are calculated and the results show that the NNJ requires a much lower energy than 2NNJ. For the evolution of the energy requirements for successive nearest neighbor jumps (SNNJ) along three different paths: circularity, zigzag and beeline, we find that the circularity path is preferred over the other two paths due to its minimum energy barriers and final energies. In the second layer, the NN jumps in intra- and inter-layer of the Cu mono-vacancy are investigated. The calculated energy barriers and final energies show that the vacancy prefer jump up to a proximate Cu site. This replacement between the Cu vacancy in the second layer and Cu atom in the first layer is remunerative for the Au atoms enrichment in the topmost layer.     

Relationship between chemical bond parameters and superconducting temperature in HgBa2Can−1CunO2n+2+δ (n=1, 2, 3, 4)

Bond covalency and valence of elements in HgBa₂Ca_n−1Cu_nO_2n+2+δ (n=1, 2, 3, 4) were calculated and their relationship with T_c was discussed. For both oxygen and argon annealed samples, the results indicated that with the increase of n, the trend of bond covalency of Hg-O and Cu-O was the same or opposite compared with that of superconducting temperature. This may suggest that the magnitudes of Cu-O and Hg-O bond covalency are important in governing the superconducting temperature. For the highest T_c sample, Hg had the lowest valence, implying that lower valence of Hg was preferred in order to produce higher T_c. For fixed n, the valence of Cu in oxygen annealed samples was larger than that in argon annealed samples, indicating that oxygen annealed samples produced more carriers than argon annealed samples.     

Growth of rare earth silicides on silicon

Dysprosium metal layers deposited on (100)Si substrates were annealed in situ at 300 °C for different time intervals in order to produce DySi_2−x layers at several stages of growth. Electron microscopy work showed that silicon reacts with Dy metal through the simultaneous growth of an amorphous interlayer and a polycrystalline phase to form DySi_2−x. Compressive stresses due to volumetric changes during the reaction deform the produced silicide layer and induce roughness at the surface and interface.     

Charge accumulation in ultrathin Cs / n - GaN and Cs / n - InGaN interfaces

We report on the observation of new phenomena that arise under Cs adsorption on n-GaN(0001) and n-InGaN(0001) surfaces. First, an extremely highly quantum efficient photoemission has been found by excitation with visible light in the transparency region of GaN and InGaN. The photoemission is revealed to appear due to the formation of an electron accumulation layer in the vicinity of the surfaces. Second, a large variety of band bending and potential wells are provided by the Cs coverages. The accumulated charge density at the n-InGaN surface is much stronger than that at the n-GaN surface. Third, a new effect is revealed, namely, the appearance of an oscillation structure in the spectral dependences of the threshold photoemission. A model concept is proposed for photocurrent oscillations that takes into account the formation of an accumulation layer and the multiple-beam interference in parallel-sided GaN or InGaN samples.     

O-vacancy and surface on CeO2: A first-principles study

Atomic and electronic structures of CeO₂ (1 1 1), (1 1 0) and (1 0 0) surfaces are investigated using the first-principles density functional theory taking into account the on-site Coulomb interaction. Both the stoichiometric and O-deficient surfaces are examined in order to clarify the overall features. The CeO₂ (1 1 1) is found to be the most stable surface, followed by the (1 1 0) and (1 0 0) surfaces, consistent with experimental observations. Three surfaces exhibit different features of relaxation. Large relaxations are found at the (1 1 0) and (1 0 0) surfaces, while very small changes are observed at the (1 1 1) surface. It is found that the O-vacancy occurs more readily at the (1 1 0) surface as compared with the (1 1 1) surface. Furthermore, the formation energies of the O-vacancy in the surfaces are lower than that in the bulk. The energetically favorable O-vacancy locates in the second O-atomic layer for the (1 1 1) while at the surface layer for the (1 1 0). The excess electrons left with the removal of the O atom are distributed in the first two layers with certain (a considerable) fraction filling the Ce-4f states.     

Optical properties of natural quantum-well compounds (C6H5-CnH2n-NH3)2PbBr4 (n=1-4)

This paper describes the synthesis and characterization of self-assembled organic-inorganic layered perovskite compounds, (C₆H₅-C_nH_2n-NH₃)₂PbBr₄ (n=1-4). the effect of the number of carbon atoms of the alkyl chain length (n) on optical properties has been studied. (C₆H₅-C_nH_2n-NH₃)₂PbBr₄ films fabricated by spin-coating are microcrystalline form, single phase and oriented with the c-axis. Crystallinity, the maximum PL intensity and the lifetime of exciton emissions varied with the number of carbon atoms. the lowest-energy exciton splits into a few fine-structure levels at low temperatures. Time-resolved photoluminescence spectra reveal that (C₆H₅-C_nH_2n-NH₃)₂PbBr₄ shows both singlet and triplet excitons. with decreasing temperature, triplet exciton emissions become dominant for (C₆H₅-C_nH_2n-NH₃)₂PbBr₄ (n=1-3), while (C₆H₅-C₄H₈-NH₃)₂PbBr₄ shows mainly singlet exciton emissions. The intersystem crossing from excited singlet state to triplet state plays an important role in the relaxation process of excitons.     

Structures, stabilities and magnetic properties of FeCon−1 (n≤16) clusters

Under GGA, size dependence of the geometrical structures, stabilities and magnetic properties of FeCo_n−1 clusters (n≤16) have been investigated together with the Co_n clusters for comparison using DFT within the PAW method implemented in VASP. The replaced Fe atom is favorable to occupy the surface position except for FeCo₁₃. The peaks appeared at n=6, 9 and 11 for FeCo_n−1 clusters and at n=6, 9 and 12 for Co_n clusters on the size dependence of second difference of total energy imply that these clusters possess relatively higher stability. The magnetic moment is strongly correlated with the effective hybridization, which is closely related to the average bond length 〈d〉 and average coordination number 〈n_c〉. A small change in the total charge of Fe atom in FeCo_n−1 clusters will lead to a relative large reverse change in the total magnetic moment of Fe atom.     

Perpendicular anisotropy and magneto-optical Kerr effect of (Ni/Pd) multilayers

Nickel film, with total thickness t_Ni in the range 1000-2000 Å, is known to exhibit perpendicular magnetic anisotropy (PMA), if the film has been deposited at room temperature. This phenomenon is due to the magneto-elastic (ME) effect. The same is also true for the (Ni/Pd)_n multilayers, where n is the period (n≥3). In this paper, we have made two kinds of multilayers: one, which does not have a Pd cap layer, belongs to the A-group, and the other, which has, belongs to the B-group. The polar Kerr rotation θ_k, the polar Kerr ellipticity ε_k, and the figure of merit (θ_k)²R, where R is the reflectance, were measured for the two wavelengths, i.e. λ=633 and 442 nm, respectively. The effective PMA energy K_⊥ was measured from the vibrating sample magnetometer. It was found that the most favorable multilayer for the magneto-optical (MO) application exists among the A-group samples: i.e. the t_Ni=1300 Å, t_Pd=50 Å (seed layer), and n=1 sample. We obtained θ_k=−9.76 min, ε_k=−9.13 min, (θ_k)²R=1.51 (rad)² at λ=442 nm, and K_⊥=3.21×10⁶ erg/cc for this optimal multilayer. Finally, the effects of the Pd seed layer on PMA and MO are also studied.     

Density functional study of TaSin (n = 1-3, 12) clusters adsorbed to graphene surface

A plane-wave density functional theory (DFT) calculations have been performed to investigate structural and electronic properties of TaSi_n (n = 1-3, 12) clusters supported by graphene surface. The resulting adsorption structures are described and discussed in terms of stability, bonding, and electron transfer between the cluster and the graphene. The TaSi_n clusters on graphene surface favor their free-standing ground-state structures. Especially in the cases of the linear TaSi₂ and the planar TaSi₃, the graphene surface may catalyze the transition of the TaSi_n clusters from an isomer of lower dimensionality into the ground-state structure. The adsorption site and configuration of TaSi_n on graphene surface are dominated by the interaction between Ta atom and graphene. Ta atom prefers to adsorb on the hollow site of graphene, and Si atoms tend to locate on the bridge site. Further, the electron transfer is found to proceed from the cluster to the surface for n = 1 and 2, while its direction reverses as n > 2. For the case of TaSi, chemisorption is shown to prevail over physisorption as the dominant mode of surface-adsorbate interaction by charge density analysis.     

Organic radical molecular solids based on [(TCNQ)n] (n=1 or 2): Syntheses, crystal structures, magnetic properties and DFT analyses

Four molecular solids consisting of the 7,7,8,8-tetracyanoquinodimethane (TCNQ) radical and benzylpyridinium or benzylquinolinium derivatives with molar ratios of 1:1 (1-3) and 2:1 (4) have been prepared and characterized. In the crystals of 1 and 3, TCNQ⁻ monoanions and the corresponding cations form segregated stacks, which are regular in 1 but irregular in 3. Instead of segregated stacks, TCNQ⁻ monoanions in 2 form isolated π-dimers. In the crystals of 4, two crystallographic independent TCNQ species possess almost equal fractional negative charge (ca. −0.5). Two types of TCNQ species form a tetrad, these tetrads make a TCNQ stack with the pattern …BAAB…BAAB… along the crystallographic a-b direction. The magnetisms for 1-4 can be simply explained by the formation of singlet spin state. A broken symmetry approach in a density functional theory framework at the ub3lyp/6-31 g level was used to calculate the magnetic exchange constants in 1-4. The results qualitatively demonstrate the observed magnetic properties.     

CO adsorption on oxygen-modified molybdenum surfaces

Structures of carbon monoxide layers on the oxygen-modified Mo(1 1 0) and Mo(1 1 2) surfaces have been investigated by means of density-functional (DFT) calculations. It is found that CO molecules adsorb at hollow sites on the O/Mo(1 1 0) surface and nearly atop Mo atoms on the O/Mo(1 1 2) surface. The favorable positions for adsorption are shown to be near protrusions of electron density above the Mo surface atoms. The presence of oxygen on the molybdenum surface significantly reduces the binding energy of the CO molecule with the substrate; on the oxygen-saturated Mo(1 1 0) surface, the adsorption of CO is completely blocked. The calculated local densities of states (LDOS) demonstrate that the O 2s peak for O adsorbed on Mo(1 1 0) surface is at −19 eV (with respect to the Fermi level), while for the oxygen atom of an adsorbed CO molecule the related 3σ molecular orbital gives rise to a peak at −23 eV. This difference stems from the bonding of the O atom either with Mo surface for adsorbed O or with C atom in adsorbed CO, and therefore the position of the O 2s peak in photoemission spectra can serve as a convincing argument in favor of either the presence or absence of the CO dissociation on Mo surfaces.     

The influence of hydrogen on the electronic and magnetic structures of TM(0 0 1) (TM=Fe, Co, Ni, and Cu) surfaces and interfaces: Ab-initio calculations

We present ab-initio investigation of the electronic and magnetic structure of TM(0 0 1) surfaces and TM/Cu(0 0 1) systems (TM=Fe, Co, Ni, Cu) with and without hydrogen adsorbed layer. The adsorption energy of hydrogen atom is found to be energetically more stable above the surface layer of Ni(0 0 1) surface than other TM(0 0 1) surfaces. The adsorption energies of hydrogen on TM/Cu(0 0 1) systems are larger than those on TM(0 0 1) surfaces. The relaxed geometries show that hydrogen has a strong influence on the interlayer distance. Furthermore, a marked reduction of Fe, Co, and Ni surface magnetic moments to 2.54, 1.41 and 0.25 μ_B, respectively, is obtained due to the presence of hydrogen.     

Effects of lattice and local dynamics in EPR spectra and electron spin relaxation of vibronic Cu(imidazole)6 complexes in Zn(imidazole)6Cl2·4H2O crystals

Cu(im)₆ complexes in Zn(im)₆Cl₂·4H₂O exhibit a strong Jahn-Teller effect which is static below 100 K and the complex in localized in the two low-energy potential wells. We have reinvestigated electron paramagnetic resonance (EPR) spectra in the temperature range 4.2-300 K and determined the deformation directions produced by the Jahn-Teller effect, energy difference 11 cm⁻¹ between the wells and energy 300 cm⁻¹ of the third potential well. The electron spin relaxation was measured by electron spin echo (ESE) method in the temperature range of 4.2-45 K for single crystal and powder samples. The spin-lattice relaxation is dominated by a local mode of vibration with energy 11 cm⁻¹ at low temperatures. We suppose that this mode is due to reorientations (jumps) of the Cu(im)₆ complex between the two lowest energy potential wells. At intermediate temperatures (15-35 K), the T₁ relaxation is determined by the two-phonon Raman processes in acoustic phonon spectrum with Debye temperature Θ_D=167 K, whereas at higher temperatures the relaxation is governed by the optical phonon of energy 266 cm⁻¹. The ESE dephasing is produced by an instantaneous diffusion below 15 K with the temperature-independent phase memory time , then it grows exponentially with temperature with an activation energy of 97 cm⁻¹. This is the energy of the first excited vibronic level. The thermal population of this level leads to a transition from anisotropic to isotropic EPR spectrum observed around 90 K. FT-ESE gives ESEEM spectrum dominated by quadrupole peaks from non-coordinating ¹⁴N atom of the imidazole rings and the peak from double quantum transition ν_dq. We show that the amplitude of the ν_dq transition can be used to determine the number of non-coordinating nitrogen atoms.     

Surface termination of the NdGaO3(1 1 0)

Auger electron spectroscopy using excitation via grazing impact of protons was applied to determine the elemental composition of the topmost and near-surface layers of a NdGaO₃(1 1 0) substrate. The preparation conditions of vicinal NdGaO₃ substrates were optimized by varying the annealing temperature, time, and gas atmosphere. Well prepared surfaces show regularly arranged, atomically smooth terraces with single-atomic steps. The surfaces were always NdO terminated with a small amount of Ga (2-4%) atoms on the surface. A Ga and O depletion layer with a thickness of about 4 nm has been detected at optimized preparation conditions.     

Depth-dependent fct to fcc strain relaxation in CoxNi1−x/Cu3Au(1 0 0) alloy films

Co_xNi_1−x/Cu₃Au(1 0 0) with x ? 11% was prepared at room temperature to study the strain relaxation and their correlation with the spin-reorientation transition. The vertical interlayer distance relaxed from 1.66 Å (fct) to 1.76 Å (fcc) while the thickness increased from 8 ML to 18 ML. Such rapid strain relaxation with thickness was attributed to the larger lattice mismatch between Co_xNi_1−x and Cu₃Au(1 0 0) (η ∼ −6.5%). The smooth change for crystalline structure was observed during strain relaxation process in which the crystalline structure seems irrespective of the alloy composition. To explain the strain relaxation, a phenomenological model was proposed. We provide a physical picture that the deeper layers may not relax while the surface layer start to relax. This assumption is based on the several experimental studies. Using the strain averaged from all layers of thin film as the volume strain of magneto-elastic anisotropy energy, the interrelation between strain relaxation and spin reorientation transition can be well described in a Néel type magneto-elastic model.     

Structural,thermal and electrical properties of the semiconductor system Ag(1−x)CuxInSe2

This paper presents a study of bulk samples synthesized of the Ag_1−xCu_xInSe₂ semiconductor system. Structural, thermal and electrical properties, as a function of the nominal composition (Cu content) x=0.0, 0.2, 0.4, 0.6, 0.8, and 1.0 were studied. The influence of x on parameters such as melting temperature, solid phase transition temperature, lattice parameters, bond lengths, crystallite size t (coherent domain), electrical resistivity, electrical mobility and majority carrier concentration was analyzed. The electrical parameters are analyzed at room temperature. In general, it is observed that the properties of the Ag_1−xCu_xInSe₂ system for x≤0.4 are dominated by n-AgInSe₂, while for x>0.4, these are in the domain of p-CuInSe₂. The crystallite size t in the whole composition range (x) is of the order of the nanoparticles. Secondary phases (CuSe, Ag₂Se and InSe) in small proportion were identified by XRD and DTA.