Intercalation of esters into vanadyl phosphate

Intercalates of vanadyl phosphate with formates and acetates of C₁–C₈ alcohols and dimethylesters of dicarboxylic acids C₂–C₆ were prepared by a displacement reaction of 2-propanol-intercalated VOPO₄. The diffractograms of the intercalates show a series of sharp (0 0 l) reflections, (2 0 0) reflection and in some cases several (h k l) lines with low intensity. The tetragonal lattice parameters of the intercalates were calculated. The intercalates prepared are not stable in air. The C=O stretching vibration in IR spectra of the intercalates prepared was shifted to lower wavenumbers in comparison with the spectra of the pure guests, indicating that all esters are anchored to the host layers by their carbonyl oxygen.     

Optical properties of natural quantum-well compounds (C6H5-CnH2n-NH3)2PbBr4 (n=1-4)

This paper describes the synthesis and characterization of self-assembled organic-inorganic layered perovskite compounds, (C₆H₅-C_nH_2n-NH₃)₂PbBr₄ (n=1-4). the effect of the number of carbon atoms of the alkyl chain length (n) on optical properties has been studied. (C₆H₅-C_nH_2n-NH₃)₂PbBr₄ films fabricated by spin-coating are microcrystalline form, single phase and oriented with the c-axis. Crystallinity, the maximum PL intensity and the lifetime of exciton emissions varied with the number of carbon atoms. the lowest-energy exciton splits into a few fine-structure levels at low temperatures. Time-resolved photoluminescence spectra reveal that (C₆H₅-C_nH_2n-NH₃)₂PbBr₄ shows both singlet and triplet excitons. with decreasing temperature, triplet exciton emissions become dominant for (C₆H₅-C_nH_2n-NH₃)₂PbBr₄ (n=1-3), while (C₆H₅-C₄H₈-NH₃)₂PbBr₄ shows mainly singlet exciton emissions. The intersystem crossing from excited singlet state to triplet state plays an important role in the relaxation process of excitons.     

A study on the effect of melt-intercalation of PEO in HNbWO6

Polyethylene oxide (PEO) has been introduced into HNbWO₆·1.5H₂O using melt-intercalation technique and its effect on the structure and properties of the host material studied using powder X-ray diffraction, FT-IR, impedance spectroscopy and TGA/DTA measurements. The intercalation reaction leads to loss of stacking coherence along the c-axis of the host layered material, as evidenced by the XRD data. FT-IR spectra of the nanocomposite show changes, indicative of complexing of the guest polymer with the host layered structure. TGA/DTA isothermal profiles exhibit marked changes upon prolonged periods of intercalation. The conductivity of the nanocomposite is found to be about 2×10⁻⁶ S/cm.     

Ni-Al layered double hydroxides modified with citrate, malate, and tartrate: Preparation by coprecipitation and uptake of Cu from aqueous solution

We report on aqueous Cu²⁺ uptake by Ni-Al layered double hydroxides (Ni-Al LDHs) modified with citrate (C₆H₅O₇³⁻), malate (C₄H₄O₅²⁻), and tartrate (C₄H₄O₆²⁻) anions via coprecipitation. Dropwise addition of a mixed aqueous solution of Ni(NO₃)₂ and Al(NO₃)₃ to the respective organic acid solutions at a constant pH of 7.0-9.0 afforded LDHs with intercalated C₆H₅O₇³⁻ and Ni(C₆H₅O₇⁾⁻, C₄H₄O₅²⁻, and C₄H₄O₆²⁻ in their interlayers. The anions were also likely adsorbed on the LDH surface. Citrate·Ni-Al LDH could rapidly take up Cu²⁺ at a constant pH of 5.0, mainly via chelation by the intercalated and adsorbed anions, rather than coprecipitation with dissolved Al³⁺ to form Cu-Al LDH. By contrast, malate and tartrate were not active as chelating agents, probably because they formed bridges between brucite-like layers by direct coordination of the two −COO⁻ groups with Al³⁺ in those layers.     

Preferential intercalation of isomeric but-2-enedioate anions into the layered double hydroxides

Intercalation of cis-but-2-enedioate anion or trans-but-2-enedioate anion into the layered double hydroxide (LDH), [Mg_0.66Al_0.34(OH)₂]Cl_0.34·0.43H₂O was carried out by the method of ion-exchange procedures. Selective reaction was observed in competitive experiments involving an equal concentration pairs of acids. The trans-but-2-enedioate anion is preferentially intercalated into the Mg-Al-LDH. The obtained intercalation compounds were characterized by X-ray diffraction, infrared and thermogravimetry techniques. The charge density on the oxygens of each of the carboxylate groups for both anions was investigated utilizing ab initio (HF/6-31G) method by G98w. From the X-ray diffraction data, the guest size and the charge density of the oxygen of the guest, the orientation of both anions between the layers was determined and the preferential intercalation mechanism was studied. These results indicate the possibility of a molecular recognition ability of LDHs.     

Vibrational study of layered ZnPS3 compounds intercalated with [Co(η5 -C5H5)2+] and [Cr(η6 -C6H6)2+] CATIONS

Infrared and Raman spectra (10–3100 cm^?1) of the layered ZnPSs compound and of intercalates with [Co(η⁵ ? C₅H₅)₂⁺] and [Cr(η⁶ ? C₆H₆)₂⁺] cations in the polycrystalline state have been recorded 300–10 K temperature range. A complete assignment of the spectra is proposed in terms of PSs group motions, Zn²⁺ ion translations and [Co(η⁵ ? C₅H₅)₂⁺] or [Cr(η⁶ ? C₆H₆)₂⁺] internal vibrations. New low frequency for the [Co(η⁵-C₅H₅)₂⁺] intercalate at low temperature are assigned to librational and torsional modes of C₅H₅ rings. Moreover, the preresonance Raman spectra of this intercalate show a selective enhancement for the metal-ligand vibrations when the charge transfer band of the cobalticenium is approached. One concludes that guest molecules are intercalated under their cationic form, are weakly interacting with the host lattice and seem to be dynamically disordered at room temperature.     

Probing the interaction between di- and tri-functionalized carboxy-phosphonic acid and LDH layer structure

A series of carboxyphosphonate-derivatives of (Zn, Al) layered double hydroxide (LDH) was prepared and characterized by a combination of techniques including powder X-ray diffraction, FTIR spectroscopy and solid-state ¹³C CP-MAS and ³¹P MAS NMR spectroscopies. The number of carbon atoms, n=1 or 2 in HO₂C(CH₂)_nPO₃H₂, was found to have an influence on the accommodation of the interleaved molecule, the carboxylate function lying perpendicular or parallel to the inorganic sheets of the LDH host material. These observations are in agreement with NMR results which evidence an interaction of the interlayered molecules through either the carbonyl or the phosphonate group or both in the case of the larger molecule, N-(phosphonomethyl)iminodiacetic acid. The variation of the basal spacing of the hybrid materials as a function of the temperature indicates a rearrangement of the molecule within the host material gap.     

Vibrational Spectroscopic Studies on the Dicyclopropylaminecadmium(II)Tetracyanometallate(II) Benzene Clathrates

ABSTRACT

New Hofmann–T_d-type clathrates of the forms Cd(CPA)₂M(CN)₄.C₆H₆ (CPA = cyclopropylamine; M?Cd or Hg) prepared in powder form and characterized by FT-IR, FT-Raman, far-IR spectra, X-ray diffraction, and elemental analyses are reported. Vibrational assignments are proposed for the bands of the host lattice and guest molecule. It is shown that the spectra are consistent with a proposed crystal structure for the compounds derived from X-ray diffraction measurements. The C, H, and N analyses were carried out for all the compounds. All the vibrational modes of coordinated CPA are characterized. The spectral features suggest that these compounds are similar in structure to the Hofmann–T_d-type clathrates.     

On the synthesis and optical absorption studies of nano-size magnesium oxide powder

Magnesium oxide (MgO) nano-size powder is synthesized using magnesium nitrate hexahydrate and oxalic acid as precursors with ethanol as a solvent. The process involves gel formation, drying at 100 °C for 24 h to form magnesium oxalate dihydrate [α-MgC₂O₄·2H₂O] and its decomposition at 500, 600, 800, and 1000 °C for 2 h to yield MgO powder (average crystallite size ∼6.5-73.5 nm). The sol-gel products at various stages of synthesis are characterized for their thermal behaviour, phase, microstructure, optical absorption, and presence of hydroxyl and other groups like OCO, CO, C-C, etc. MgO powder is shown to possess an f.c.c. (NaCl-type) structure with lattice parameter increasing with decrease in crystallite size (t_av); typical value being ∼4.222(2) Å for t_av∼6.5 nm as against the bulk value of 4.211 Å. Infrared absorption has shown MgO to be highly reactive with water. Also, a variety of F- and M-defect centres found in MgO produce energy levels within the band gap (7.8 eV), which make it attractive for application in plasma displays for increasing secondary electron emission and reducing flickering effects. The possible application of the intermediate sol-gel products, viz., α-MgC₂O₄·2H₂O and anhydrous magnesium oxalate (MgC₂O₄) in understanding the plants and ESR dosimetry, respectively, has also been suggested.     

The luminescent properties of lanthanide ions activated BaBPO5 in VUV-Vis range

The VUV-Vis spectroscopic properties of barium borophosphate BaBPO₅ doped with lanthanide ions are investigated. The host absorption band is found to be around 150-160 nm, the charge transfer band of Eu³⁺ is observed at about 264 nm, the f-d transitions of Ce³⁺, Eu²⁺, and Tb³⁺ in the host lattice are depicted. The partial reduction of Eu³⁺ in air atmosphere is reported.     

Stoichiometrically controlled direct solid-state synthesis of C60H2

The direct solid-state synthesis of C₆₀H₂ has been demonstrated by controlling the amount of hydrogen introduced into the reaction with C₆₀. Palladium hydride has been used as the source of hydrogen. The main product 1,2-C₆₀ is the isomer predicted to have the lowest energy of the possible 23 isomers; in addition, small amounts of the thermodynamically most stable isomer of C₆₀H₄, 1,2,3,4-C₆₀H₄, have also been obtained.     

Synthesis and magnetic properties of three-dimensional metal (II) organophosphates

A new series of metal (II) organophosphates with the formula M(II) 2(H₂O)₂[O₃PCH₂(C₆H₄)CH₂PO₃] (M=Mn, Fe and Ni) have been prepared by hydrothermal synthesis. The structure consisted of two-dimensional metal–oxygen inorganic layers is pillared by p-xylylenediphosphonate to form a three dimensional framework. The layers are constructed by corner-sharing metal oxygen polyhedron. A study on the magnetism of the materials indicates the presence of spin canted antiferromagnetc interactions. The manganese and iron compounds represent the interesting 3D metal organophosphate molecular metamagnet due to spin canted antiferromagnetic with high critical temperature (40 K for Mn; 16 K for Fe). The infinite M–O–M layers are believed to be responsible for this high performance.     

The first synthesis of a graphite bis(oxalato)borate intercalation compound

A new graphite intercalation compound containing the bis(oxalato)borate anion, B[OC(O)C(O)O]₂⁻, is prepared for the first time by chemical oxidation of graphite with fluorine gas in the presence of a solution containing the intercalate anion in anhydrous hydrofluoric acid. The products of stage 1-3 compounds are characterized by powder X-ray diffraction, thermogravimetric analysis, and elemental analyses. X-ray diffraction data indicate a standing-up orientation for the borate anion, with long axis perpendicular to the graphene sheets. Elemental analyses provide x and δ for the nominal composition of C_xB[OC(O)C(O)O]₂·δF, where the chelate borate and fluoride are co-intercalates, and indicate a low borate, and high fluoride, intercalate content as compared to anion packing in other graphite intercalation compounds.     

J-aggregates of pseudoisocyanine with long alkyl substituents in thin films: Synthesis, spectral properties, and thermal stability

The formation and properties of J-aggregates in thin solid films of pseudoisocyanines with long N-alkyl groups, obtained by centrifuging from solutions in organic solvents, were studied. It is shown for the first time that nonsymmetric cyanine dyes, containing a C₂H₅ group at one nitrogen atom and a C₁₀H₂₁, C₁₅H₃₁, or C₁₈H₃₇ group at another nitrogen atom, spontaneously form J-aggregates stable at room temperature and pressing a narrow absorption band with a half-width at half maximum of 200 cm^?1. The thermal stability of J-aggregates in thin films of pseudoisocyanines with alkyl substituents decreases in the following order: C₂H₅-C₂H₅> C₂H₅-C₆H₁₃>C₂H₅-C₁₈H₃₇>C₂H₅-C₁₀H₂₁>C₂H₅-C₁₅H₃₁. By introducing 1-octadecyl-2-methylquinolinium iodide in the film, it was found that the J-aggregates studied consist of a small number (2–4) of dye molecules.     

Structural, optical and scintillation properties of cerium cyclotriphosphates and polyphosphates

The cerium cyclotriphosphate CeP₃O₉·3H₂O and polyphosphate Ce(PO₃)₃ have been optically investigated for the first time. In both materials, excitation and emission spectra under UV and X-ray excitations as well as emission decays of Ce³⁺ were measured at room temperature. The spectroscopic results of anhydrous Ce(PO₃)₃, prepared by progressively heating the corresponding CeP₃O₉. 3H₂O, are discussed and correlated with the structural data.For the Ce(PO₃)₃ polyphosphate material, the Stokes shift of the d-f emission is very small (760 cm⁻¹), inducing an efficient ultraviolet luminescence and a new application as scintillator.     

An Infrared Spectroscopic Study of Crystalline Copper (II) Propionate and Butyrate

Abstract

Abstract: The vibrational spectra of crystalline anhydrous copper (II) propionate and butyrate were studied by FT-IR spectroscopy. A detailed assignment of the spectra of both compounds is presented and discussed. It is shown that the presence of two non-equivalent sets of carboxylate ligands within the crystals gives rise to several band splittings, which are particularly evident in those bands ascribable to normal modes involving predominantly the -C_βH₃ or -C_βH₂-fragments. In addition, the vibrational assignments made for the studied molecules are shown to be very useful to help understanding the much more complex spectra of long chain copper carboxylates.     

Metatungstate and tungstoniobate-containing LDHs: Preparation, characterisation and activity in epoxidation of cyclooctene

Polyoxometalates (POMs) H₂W₁₂O₄₀⁶⁻ and W₄Nb₂O₁₉⁴⁻ have been intercalated between the brucite-like layers of Mg, Al and Zn, Al hydrotalcites by anion exchange, starting from the corresponding nitrate precursors. The solids have been characterised by Powder X-ray Diffraction (PXRD), Fourier Transform infrared (FT-IR) spectroscopy, N₂ adsorption-desorption at −196 °C and thermogravimetric (TG) and differential thermal analyses (DTA), and have been tested in the epoxidation of cyclooctene using H₂O₂ or t-BuOOH as oxidants. The results show that both anions are effectively located in the interlayer space maintaining their pristine structures without depolymerisation. Upon intercalation of such large anions microporosity is developed and subsequently an increase in the specific surface areas is also observed. In general, the prepared materials possess catalase and epoxidation activity, with ZnAl-intercalated H₂W₁₂O₄₀⁶⁻ giving the best results in terms of epoxide yield (17% at 24 h). Product selectivity is different for the intercalated and free POMs, the latter yielding 1,2-cyclooctanediol as the only product, whereas the former produces only the epoxide. The epoxidation reaction seems to be catalysed in homogeneous phase by the POM.     

Infrared crystal spectra of C2H4, C2D4, and as-C2H2D2 and the general harmonic force field of ethylene

Carbon-13 frequency shifts for C₂H₄, C₂D₄, and as-C₂H₂D₂ have been measured in isotopic solid solutions in crystalline films at 60 K. All but two of the shifts (for as-C₂H₂D₂) are compatible with recently determined ζ data for C₂H₄, with ¹³C frequency shifts for C₂H₄ and C₂D₄ in the gas phase and with conventional frequency data. Together, these data completely determine with precision all 18 parameters of the GHFF for ethylene, the previous ambiguity in choice between two sets of A_g species force constants being removed. The force field reproduces closely the observed centrifugal distortion constants for C₂H₄, a ζ constant observed for trans-C₂H₂D₂, and the inertia defects for C₂H₄, C₂D₄, and as-C₂H₂D₂. Vibration and rotation constants for all isotopically deuterated ethylenes are calculated.Possible explanations for the two anomalous crystal shifts in as-C₂H₂D₂ involve the effects of the crystal field, and failure of the use of Dennison's rule for making anharmonic corrections to the shifts. The former explanation is preferred as a result of thorough analysis of the anharmonicity constants for as-C₂H₂D₂ determined from many overtone and combination bands in the gas and crystal spectra.     

Improving magnetic properties of barium hexaferrites by La or Pr substitution

La or Pr substituted barium hexaferrites, Ba_1−x(La or Pr)_xFe₁₂O₁₉, x=0.00-0.20, were successfully prepared by a citrate combustion process. The sintered bodies were structurally and magnetically studied by powder X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). All XRD patterns show the single phase of the magnetoplumbite barium ferrite without other intermediate phases. Magnetization (M_S) and coercive field (H_C) could be improved by substitutions of La or Pr ions on Ba ion basis sites. The M_S reveal magnetic behavior with respect to La or Pr ions content, showing an increase at first and then a decrease. The H_C increases remarkably with increasing La or Pr ions content.     

Structural, sorption and thermodynamic correlations from a layered barium phenylarsonate/n-alkyldiamine system

The barium phenylarsonate compound, Ba(HO₃AsC₆H₅)₂·2H₂O, has the ability to intercalate n-alkyldiamine molecules, H₂N(CH₂)_nNH₂ (n=2-5). The amount intercalated (n_f) from a batchwise procedure and the variation of the original basal distance (d) of 1245 ppm determined through X-ray diffractions, gave linear correlations as a function of the number of carbon atoms in the aliphatic chain (n_c): n_f=(2.66±0.06)−(0.13±0.02)n_c and d=(2168±65)+(114±14)n_c. The intercalation process was calorimetrically followed to give exothermic enthalpy and negative Gibbs energy, reflecting spontaneous intercalation reactions at the solid/liquid interface. The displacement of solvent molecules bonded to amine and of those on the matrix during the intercalation increases the disorder to result in positive entropy, giving a favorable set of thermodynamic data for this system.