Preparation and hydrogen storage of activated rayon-based carbon fibers with high specific surface area

Activated carbon fibers were prepared from rayon-based carbon fibers by two step activations with steam and KOH treatments. Hydrogen storage properties of the activated rayon-based carbon fibers with high specific surface area and micropore volume have been investigated. SEM, XRD and Brunauer-Emmett-Teller (BET) were used to characterize the samples. The adsorption performance and porous structure were investigated by nitrogen adsorption isotherm at 77 K on the base of BET and density functional theory (DFT). The BET specific surface area and micropore volume of the activated rayon-based carbon fibers were 3144 m²/g and 0.744 m³/g, respectively. Hydrogen storage properties of the samples were measured at 77 and 298 K with pressure-composition isotherm (PCT) measuring system based on the volumetric method. The capacities of hydrogen storage of the activated rayon-based carbon fibers were 7.01 and 1.46 wt% at 77 and 298 K at 4 MPa, respectively. Possible mechanisms for hydrogen storage in the activated rayon-based carbon fibers are discussed.     

Effects of carbonization temperature on microstructure and electrochemical performances of phenolic resin-based carbon spheres

Activated phenol resin-based carbon spheres (APCS) electrodes with high double layer capacitance and good rate capability were prepared from phenol resin-based spheres (PS) at different carbonization temperatures prior to KOH activation. The carbonization temperature has a marked effect on both the pore structure and the electrochemical performances of the APCS in 6 M KOH electrolyte. APCS carbonized at 600 °C results in higher specific surface area and larger pore size, and hence higher capacitance and better rate capability. The specific capacitance of the APCS in 6 M KOH aqueous solution can be as high as 282 F g⁻¹. It remains 252 F g⁻¹ as the current density increases to 1000 mA g⁻¹.     

Synthesis and characterization of porous silicon layers for 1D photonic crystal application

In this paper, we studied the optical and physical properties of electrochemically prepared porous silicon layers. The atomic force microscopy analysis showed that the etching depth, pore diameter and surface roughness increase as the etching time increased from 30 to 50 mA/cm². By tuning two current densities J₁ = 50 mA/cm² and J₂ = 30 mA/cm², two samples of 1D porous silicon photonic crystals were fabricated. The layered structure of 1D photonic crystals has been confirmed by scanning electron microscopy measurement which showed white and black strips of two distinct refractive index layers. Finally, the measured reflectance spectra of 1D porous silicon photonic crystals were compared with simulated results.     

Potato starch-based activated carbon spheres as electrode material for electrochemical capacitor

Potato starch-based activated carbon spheres (PACS) were prepared from potato starch by stabilization, carbonization followed by activation with KOH. The obtained PACS are hollow and retain the original morphology of potato starch with decrease in size, as shown by scanning electron microscopy. Modification of textural properties of the PACS was achieved by varying the carbonization temperature and the ratio of KOH/PCS. The results of N₂ adsorption isotherms indicate that the samples prepared are mainly microporous. The electrochemical behaviors of the hollow PACS were studied by galvanostatic charge-discharge, cyclic voltammetry, and impedance spectroscopy. The results indicate that high specific capacitance of 335 F/g is obtained at current density 50 mA/g for PACS with specific surface area 2342 m²/g. Only a slight decrease in capacitance, to 314 F/g, was observed when the current density increases to 1000 mA/g, indicating a stable electrochemical property.     

Preparation of activated carbon from Enteromorpha prolifera and its use on cationic red X-GRL removal

Enteromorpha prolifera was pyrolyzed to prepare activated carbon using chemical activation by zinc chloride. The effect of activation parameters such as activation temperature, weight ratio (Enteromorpha prolifera to ZnCl₂), and activation time was investigated. The BET results showed that the surface area and pore volume of activated carbons were achieved as high as 1722 m²/g and 1.11 cm³/g, respectively, in the optimal activation conditions. Batch adsorption studies were carried out to study the adsorption properties of cationic red X-GRL onto activated carbon by varying the parameters like initial solution pH, contact time, and temperature. The kinetic studies showed that the adsorption data followed a pseudo second-order model. The isotherm analysis indicated that the adsorption data could be represented by the Langmuir isotherm model. The Langmuir monolayer adsorption capacity of cationic red X-GRL was estimated as 263.16 mg/g at pH 6.0.     

VPO catalysts synthesized on substrates with modified activated carbons

VPO catalysts were prepared on oxidized and unoxidized activated carbons differing in initial porous structure. Carbons were oxidized under relatively soft (30% H₂O₂, 200 °C) and hard (50% H₂O₂, 350 °C) conditions. Carbon modification was carried out hydrothermally in a traditional autoclave (HTT) or a microwave reactor (MWT). The synthesis was also carried out under hydrothermal (HTS or MWS) conditions. V₂O₅ and NH₄VO₃ were used as precursors. The samples are characterized by diversified porous structure at S_BET = 732-1617 m²/g and V_por = 0.44-0.90 cm³/g, as well as various degree of VPO crystallinity. Possibility of preparation of the VPO catalysts under ecologically appropriate conditions, i.e. in aqueous solutions, was shown.     

Direct synthesis of mesoporous carbon from the carbonization of hydroxypropyl-β-cyclodextrin/silica composite and its catalytic performance

A simple and efficient route is reported for the synthesis of mesoporous carbon materials by directly carbonizing hydroxypropyl-β-cyclodextrin-silica composites. The resulting carbon materials, with uniform wormlike mesoporous structure and certain degree graphitic phase characteristics in porous wall, possess narrow pore size distribution, high surface area (>1000 m² g⁻¹) and pore volume (>1.2 cm³ g⁻¹). It is worth mentioning that the carbon materials have high catalytic activity for the reduction of p-nitrotoluene using hydrazine hydrate as the reducing agent; moreover, the catalytic activity is not reduced notably after being reused for six times.     

Freeze casting of aqueous coal fly ash/alumina slurries for preparation of porous ceramics

A porous mullite-matrix composite with a bimodal pore structure has been prepared by a freeze casting route using water/coal fly slurry system. The top and bottom parts of the sintered freeze cast body consisted of solid particles and micropores, which were irregularly distributed. However, the middle section was made up of small lamellar pores and porous ceramic walls, aligned along the solidification direction. The porosity of mullite composites was in the range 67-55% after sintering at 1300-1500 °C. The addition of 3Y-ZrO₂ reduced the porosity, especially material in sintered at 1500 °C due to relatively high densification. The compressive strength of the porous composite with 10 wt% 3Y-ZrO₂ addition, sintered at 1500 °C exhibited a maximum value of ∼41 MPa.     

Fabrication and application of highly ordered mesoporous Co3O4, NiO, and their metals

Highly ordered mesoporous Co₃O₄, NiO, and their metals were synthesized by nanocasting method using there corresponding mesoporous SBA-15 silica as a template. The obtained porous metal oxides have high surface areas, large pore volume, and a narrow pore size distribution. The N₂-adsorption data for mesoporous metal oxides have provided the BET area of 257.7 m² g⁻¹ and the total pore volume of 0.46 cm³ g⁻¹. The mesoporous metals were employed as a catalyst in the synthesis of (S)-3-pyrrolidinol from chiral (S)-4-chloro-3-hydroxybutyronitrile, and a high yield to (S)-3-pyrrolidinol-salt was obtained on the mesoporous Co metal catalyst.     

Preparation and characterization of activated carbon produced from pomegranate seeds by ZnCl2 activation

In this study, pomegranate seeds, a by-product of fruit juice industry, were used as precursor for the preparation of activated carbon by chemical activation with ZnCl₂. The influence of process variables such as the carbonization temperature and the impregnation ratio on textural and chemical-surface properties of the activated carbons was studied. When using the 2.0 impregnation ratio at the carbonization temperature of 600 °C, the specific surface area of the resultant carbon is as high as 978.8 m² g⁻¹. The results showed that the surface area and total pore volume of the activated carbons at the lowest impregnation ratio and the carbonization temperature were achieved as high as 709.4 m² g⁻¹ and 0.329 cm³ g⁻¹. The surface area was strongly influenced by the impregnation ratio of activation reagent and the subsequent carbonization temperature.     

Preparation of activated carbon from cherry stones by chemical activation with ZnCl2

Cherry stones (CS), an industrial product generated abundantly in the Valle del Jerte (Cáceres province, Spain), were used as precursor in the preparation of activated carbon by chemical activation with ZnCl₂. The influence of process variables such as the carbonisation temperature and the ZnCl₂:CS ratio (impregnation ratio) on textural and chemical-surface properties of the products obtained was studied. Such products were characterised texturally by adsorption of N₂ at −196 °C, mercury porosimetry and density measurements. Information on the surface functional groups and structures of the carbons was provided by FT-IR spectroscopy. Activated carbon with a high development of surface area and porosity is prepared. When using the 4:1 impregnation ratio, the specific surface area (BET) of the resultant carbon is as high as 1971 m² g⁻¹. The effect of the increase in the impregnation ratio on the porous structure of activated carbon is stronger than that of the rise in the carbonisation temperature, whereas the opposite applies to the effect on the surface functional groups and structures.     

Controlling the micropore size of activated carbons for the treatment of fuels and combustion gases

Exclusively microporous activated carbons have been prepared from cork by physical and chemical activation under different conditions. The results show that it is possible to control the pore size of the activated carbons and to obtain materials with narrow micropore size (≥0.69 nm) and high micropore volume (≤0.64 cm³ g⁻¹) equal to or better than the best activated carbon fibres. Higher micropore volumes are generally obtained by chemical activation at higher temperature using dry or potassium hydroxide impregnation. On the other hand, wet or carbonate impregnation, as well as high temperature, or physical activation with CO₂ or H₂O under appropriate conditions, favours low mean pore widths.     

Cationic starch as a precursor to prepare porous activated carbon for application in supercapacitor electrodes

Three activated carbons (ACs) for the electrodes of supercapacitor were prepared from cationic starch using KOH, ZnCl₂ and ZnCl₂/CO₂ activation. The BET surface area, pore volume and pore size distribution of the ACs were evaluated using density functional theory method, based on N₂ adsorption isotherms at 77 K. The surface morphology was characterized with SEM. Their electrochemical performance in prototype capacitors was determined by galvanostatic charge/discharge characteristics and cyclic voltammetry, and compared with that of a commercial AC, which was especially prepared for use in supercapacitors. The KOH-activated starch AC presented higher BET surface area (3332 m² g⁻¹) and larger pore volume (1.585 cm³ g⁻¹) than those of the others, and had a different surface morphology. When used for the electrodes of supercapacitors, it exhibited excellent capacitance characteristics in 30 wt% KOH aqueous electrolytes and showed a high specific capacitance of 238 F g⁻¹ at 370 mA g⁻¹, which was nearly twice that of the commercial AC.     

Nanostructured carbons for solid phase extraction

Nanostructured carbons have been obtained by the template method using zeolite NaY and silica gels (SG60, Fluka and ZK, POCh) as structure directing agents. Texture and porous structure of carbons were characterized by TEM, XRD and nitrogen adsorption. Surface chemistry was investigated by the potentiometric titration method. It has been shown that all carbons show developed and uniform porous structure with mean size in the micropore range (1.1 nm) for zeolite derived carbon and in the mesopore range (3.4 and 4.8 nm) for silica gel derived carbons. The BET surface area of silica gel derived carbons is in the range 1230-1280 m²/g whereas zeolite derived carbon possesses very high BET surface area, 3000 m²/g. Potentiometric titration showed that carbons obtained by the template method contain significant amount of acid surface groups (carboxylic, lactone/enol and phenolic) with the total amount 1.1-1.5 mmol/g. To study adsorption-desorption properties of nanostructured carbons towards phenol and chlorophenols the solid phase extraction method was used. High recoveries of chlorophenols were obtained (80-93%) at the breakthrough volumes 1700-3000 mL. The recoveries are much higher than that obtained with commercially available carbon ACC (Supelco).     

Low-density carbon material modified with pyrolytic carbon

Here we report a physicochemical investigation of low-density carbon materials modified with pyrolytic carbon (PC). Exfoliated graphite (EG) obtained by nitrate expandable graphite thermal destruction was pressed into low-density graphite materials (LDGMs) with densities of 0.045-0.50 g/cm³ and saturated with PC by impact CVI technique. LDGM infiltration with PC leads to sample weight and density growth. The amount of deposited PC strictly depends on synthesis conditions. The maximum surface and volume deposition of PC occurred for samples with density of 0.05 g/cm³. XRD, Raman spectroscopy and scanning electron microscopy revealed that the deposited PC is of smooth laminar (SL) type. Composite thermal conductivity is about 2-3.5 Wt/m K.     

Porous PVdF-HFP/P123 electrolyte membrane containing flexible quasi-solid-state dye-sensitized solar cells produced by the compression method

Flexible quasi-solid-state dye-sensitized solar cells (DSSCs) with porous poly(vinylidenefluoride-co-hexafluoropropylene) (PVdF-HFP)/polyethylene oxide-co-polypropylene oxide-co-polyethylene oxide (P123) electrolyte membranes were fabricated and their photocurrent–voltage (I–V) characteristics are studied. Flexible TiO₂ photoelectrodes were prepared using the compression method and porous PVdF-HFP/P123 membranes, by the nonsolvent-induced phase inversion technique. To activate the electrolyte membrane, the membrane was immersed in liquid-state electrolyte. Increased compression pressure improved the interconnection between TiO₂ nanoparticles, enhancing the photovoltaic performances of the flexible liquid-state DSSCs to a maximum of 3.92% efficiency. Meanwhile, the overall pore structure of the PVdF-HFP/P123 membranes was controlled by varying the blend ratio of P123 to PVdF-HFP. Membranes higher in P123 content gave larger pores and pore volume, increasing the electrolyte uptake of the porous membrane, and thus the ionic conductivity of the electrolyte membrane as well. The photovoltaic characteristics of the flexible quasi-solid-state DSSCs containing a porous PVdF-HFP/P123 electrolyte membrane showed a maximum at 50 wt% P123 content, which gave a short-circuit current density (J_sc) value of 7.28 mA/cm², an open-circuit voltage (V_oc) of 0.67 V, a fill factor (FF) of 0.61 and an energy conversion efficiency (η) of 2.98%. Furthermore, the device designed in this study showed good durability compared to those based on liquid-state electrolyte.     

One-step synthesis of Fe3O4@C/reduced-graphite oxide nanocomposites for high-performance lithium ion batteries

In this paper, we propose a facile one-step strategy to prepare Fe₃O₄@amorphous carbon/reduced graphite oxide nanocomposites (FCRGs) under hydrothermal conditions. A transmission electron microscopy image has shown that the as-formed Fe₃O₄ nanoparticles coated with a layer of amorphous carbon are wrapped by reduced graphite oxide (r-GO) sheets. The diameter of Fe₃O₄ nanoparticles is less than 50 nm. N₂ adsorption/desorption isotherms indicate that the specific surface area of FCRG is 31.6 m²/g with porous structure. FCRG exhibits improved cycling stability and rate performances as a potential anode material for high-performance lithium ion batteries.     

Pillaring and photocatalytic properties of mesoporous α-Fe2O3/titanate nanocomposites via an exfoliation and restacking route

Mesoporous α-Fe₂O₃-pillared titanate nanocomposites have been successfully synthesized through an exfoliation−restacking route. Powder X-ray diffraction and N₂ adsorption-desorption isotherms revealed that the α-Fe₂O₃ pillared titanate has an interlayer distance of 3.27 nm, a specific surface area of 66 m²/g and an average pore size of 7.6 nm, suggesting the formation of a mesoporous pillared structure. UV-vis diffuse reflectance spectra show a red shift, indicative of a narrow band gap energy of ∼2.1 eV compared to the host layered titanate, which is essential in creating a visible light photocatalytic activity. The results of degradation of rhodamine B reveal that the present pillared mesoporous composites exhibit better photocatalytic activities than those of the pristine materials under visible irradiation, based on the band gap excitement and the dye-sensitized path, originated from their high surface area, mesoporosity and the electronic coupling between the host and the guest components.     

Optimization of nickel adsorption from aqueous solution by using activated carbon prepared from waste apricot by chemical activation

Waste apricot supplied by Malatya apricot plant (Turkey) was activated by using chemical activation method and K₂CO₃ was chosen for this purpose. Activation temperature was varied over the temperature range of 400-900 °C and N₂ atmosphere was used with 10 °C/min heat rate. The maximum surface area (1214 m²/g) and micropore volume (0.355 cm³/g) were obtained at 900 °C, but activated carbon was predominantly microporous at 700 °C. The resulting activated carbons were used for removal of Ni(II) ions from aqueous solution and adsorption properties have been investigated under various conditions such as pH, activation temperature, adsorbent dosage and nickel concentration. Adsorption parameters were determined by using Langmuir model. Optimal condition was determined as; pH 5, 0.7 g/10 ml adsorbent dosage, 10 mg/l Ni(II) concentration and 60 min contact time. The results indicate that the effective uptake of Ni(II) ions was obtained by activating the carbon at 900 °C.     

Preparation of activated carbon from a renewable bio-plant of Euphorbia rigida by H2SO4 activation and its adsorption behavior in aqueous solutions

The use of activated carbon obtained from Euphorbia rigida for the removal of a basic textile dye, which is methylene blue, from aqueous solutions at various contact times, pHs and temperatures was investigated. The plant material was chemically modified with H₂SO₄. The surface area of chemically modified activated carbon was 741.2 m² g⁻¹. The surface characterization of both plant- and activated carbon was undertaken using FTIR spectroscopic technique. The adsorption process attains equilibrium within 60 min. The experimental data indicated that the adsorption isotherms are well described by the Langmuir equilibrium isotherm equation and the calculated adsorption capacity of activated carbon was 114.45 mg g⁻¹ at 40° C. The adsorption kinetics of methylene blue obeys the pseudo-second-order kinetic model and also followed by the intraparticle diffusion model up to 60 min. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated to estimate the nature of adsorption. The activation energy of the system was calculated as 55.51 kJ mol⁻¹. According to these results, prepared activated carbon could be used as a low-cost adsorbent to compare with the commercial activated carbon for the removal textile dyes from textile wastewater processes.