Diffuse phase transition of Fe doped lead ytterbium tantalate ceramics

The effect of different concentration of Fe on the phase transition behavior of Lead ytterbium tantalate is investigated by dielectric and differential scanning calrimetry measurements. The samples are prepared through solid state reaction method and it has been found that the sintering temperature significantly lowered when the proportion of Pb(Fe_1/2Ta_1/2)O₃ increased. It has been observed that the doping in small amounts (0≤x≤0.2) of Fe could meliorate the dielectric and ferroelectric properties. The diffuseness in the mode of phase transition increases and the phase transition temperature decreases as a function of Fe content. It is revealed that the dielectric data and heat capacity data follow a similar trend in the variation of the mode of phase transition and phase transition temperatures. The phase transition temperature values obtained from the heat capacity measurement well agreed with the values obtained from dielectric measurement.     

Phase transformation in (0.90−x)Pb(Mg1/3Nb2/3)O3-xPbTiO3-0.10PbZrO3 piezoelectric ceramic: X-ray diffraction and Raman investigation

Piezoelectric ceramics with compositions of (0.90−x)Pb(Mg_1/3Nb_2/3)O₃-xPbTiO₃-0.10PbZrO₃, x=0.28, 0.31, 0.34, 0.37, 0.40 and 0.43, were prepared using the conventional columbite precursor method, and their structural phase transformation and piezoelectric behaviors near the morphotropic phase boundary (MPB) have been systematically investigated as a function of PbTiO₃ content. X-ray diffraction (XRD) results demonstrate that the structure of the ceramics experiences a gradual transition process from rhombohedral phase to tetragonal phase with the increasing of PbTiO₃ content, and that compositions with x=0.34-0.40 lie in the MPB region of this ternary system. A Raman spectra investigation of the ceramic samples testified to the transformation process of rhombohedral phase to tetragonal phase by comparing the relative intensities of tetragonal E(2TO₁) mode and rhombohedral phase R_h mode. The structure information was also correlated to the parabola change of the piezoelectric constant; the maximum piezoelectric constants were obtained near the MPB region.     

Ferroelectric phase stabilization, phase transformations and?thermal properties in (1? x )PbZrO3– x Pb(Co1/3Nb2/3)O3 solid solution

The solid solution between the antiferroelectric PbZrO₃ (PZ) and relaxor ferroelectric Pb(Co_1/3Nb_2/3)O₃ (PCoN) was synthesized by the columbite method. The phase structure and thermal properties of (1−x)PZ–xPCoN, where x=0.0–0.3, were investigated. With these data, the ferroelectric phase diagram between PZ and PCoN has been established. The crystal structure data obtained from XRD indicates that the solid solution PZ–PCoN, where x=0.0–0.3, successively transforms from orthorhombic to rhombohedral symmetry with an increase in PCoN concentration. The AFE→FE phase transition was found in the compositions of 0.0≤x≤0.10. The AFE→FE phase transition shift to lower temperatures with higher compositions of x. The width of the temperature range of FE phase was increased with increasing amount of PCoN. It is apparent that the replacement of the Zr⁴⁺ ion by (Co_1/3Nb_2/3)⁴⁺ ions would decrease the driving force for antiparallel shift of Pb²⁺ ions, because they interrupt the translational symmetry. This interruption caused the appearance of a rhombohedral ferroelectric phase when the amount of PCoN was more than 10 mol%.     

Specific features of the structure of semiconducting sms polycrystals in the homogeneity region

The structure and thermal properties of polycrystalline samples of samarium monosulfide have been investigated in the homogeneity region (Sm_{1 + x} S at 0 < x < 0.17). The X-ray structural parameters and porosity of the samples have been measured, and their correlation with the thermodynamic parameters of the first-order phase transition occurring in polycrystalline samarium monosulfide at temperatures in the range from 240 to 260 K in Sm_{1 + x} S has been established. It has been assumed that the measured nanopores correspond to voids between misoriented coherent X-ray scattering regions. It has been shown that the maximum of the absorbed heat energy is achieved in the case where the volume of the pore becomes comparable to the volume of the nucleus of a new phase of samarium sulfide, which is calculated from thermodynamic relationships.     

Interrelation of antiferrodistortive and ferroelectric phase transitions in Sr1−xAxTiO3 (A=Ba, Pb)

A dielectric and ultrasonic velocity study of antiferrodistortive and ferroelectric phase transitions in Sr_1−xA_xTiO₃ (A=Ba, Pb) is reported. It is shown that both phase transitions co-exist at x<0.03 but at the higher concentration the ferroelectric phase transition entirely suppresses the antiferrodistortive phase transition. The experimentally obtained phase diagrams are discussed in the framework of the Landau phenomenological theory.     

Leakage current, ferroelectric and structural properties in Pb1−xBaxTiO3 thin films prepared by chemical route

Single-phase perovskite structure Pb_1−xBa_xTiO₃ thin films (x=0.30, 0.50 and 0.70) were deposited on Pt/Ti/SiO₂/Si substrates by the spin-coating technique. The dielectric study reveals that the thin films undergo a diffuse type ferroelectric phase transition, which shows a broad peak. An increase of the diffusivity degree with the increasing Barium contents was observed, and it was associated to a grain decrease in the studied composition range. The temperature dependence of the phonon frequencies was used to characterize the phase transition temperatures. Raman modes persist above tetragonal to cubic phase transition temperature, although all optical modes should be Raman inactive. The origin of these modes was interpreted in terms of breakdown of the local cubic symmetry by chemical disorder. The absence of a well-defined transition temperature and the presence of broad bands in some interval temperature above FE-PE phase transition temperature suggested a diffuse type phase transition. This result corroborates the dielectric constant versus temperature data, which showed a broad ferroelectric phase transition in these thin films. The leakage current density of the PBT thin films was studied at different temperatures and the data follow the Schottky emission model. Through this analysis the Schottky barrier height values 0.75, 0.53 and 0.34 eV were obtained to the PBT70, PBT50 and PBT30 thin films, respectively.     

Orbital degrees of freedom and electron correlation in optical absorption of metallic LaSrMnO

The optical absorption in ferromagnetic metal La_1-xSr_xMnO₃ is anomalous; it has a wide-range absorption up to about 1 eV even at zero temperature. Since 3d electrons in La_1-xSr_xMnO₃ partially fill doubly degenerate e_g orbitals, the orbital degrees of freedom are crucial to understand this metallic system. We argue that the interband transition within e_g orbitals is important in the optical absorption. The optical spectrum is modified also by the inter-orbital Coulomb interaction. We have examined perturbatively the effect of the Coulomb interaction on the spectrum. Available experiments are discussed by comparing with the present results. Received: 13 February 1998 / Accepted: 17 March 1998     

Na1−xLixNbO3 ceramics studied by X-ray diffraction, dielectric, pyroelectric, piezoelectric and Raman spectroscopy

Na_1−xLi_xNbO₃ ceramics with composition 0.05≤x≤0.30 were prepared by solid-state reaction method and sintered in the temperature range 1100-1150 °C. These ceramics were characterised by X-ray diffraction as well as dielectric permittivity measurements and Raman spectroscopy. Dielectric properties of ceramics belonging to the whole composition domain were investigated in a broad range of temperatures from 300 to 750 K and frequencies from 0.1 to 200 kHz. The Rietveld refinement powder X-ray diffraction analysis showed that these ceramics have a single phase of perovskite structure with orthorhombic symmetry for x≤0.15 and two phases coexistence of rhombohedral and orthorhombic above x=0.20. The evolution of the permittivity as a function of temperature and frequency showed that these ceramics Na_1−xLi_xNbO₃ with composition 0.05≤x≤0.15 present the classical ferroelectric character and the phase transition temperature T_C increases as x content increases. The polarisation state was checked by pyroelectric and piezoelectric measurements. For x=0.05, the piezoelectric coefficient d₃₁ is of 2pC/N. The evolution of the Raman spectra was studied as a function of temperatures and compositions. The results of the Raman spectroscopy study confirm our dielectric measurements, and they indicate clearly the transition from the polar ferroelectric phase to the non-polar paraelectric one.     

Magnetic properties of Ising metamagnet in both external longitudinal and transverse fields

The phase diagrams of a two-sublattice Ising metamagnet at finite temperature in a mixed longitudinal field and a transverse magnetic field are investigated by the use of an effective-field theory (EFT) with correlations. In addition to the second-order transition lines, the first-order transition lines are also presented in the phase diagrams, since the Gibbs free energy can be calculated numerically. The results show that there is no fourth-order critical line in the phase diagrams given by using EFT as found by using mean-field theory (MFT). The tricritical lines and their projection in the t−h_x plane obtained by using EFT are also quite different from those by using MFT. Only one type of phase diagram is obtained by using EFT while three kinds of phase diagrams are obtained by using MFT, which indicates that only the first kind of phase diagrams obtained by using MFT is reliable. Furthermore, it is shown that the region of first-order transitions increases as the transverse magnetic field h_x decreases.     

Phase transition and electronic structure of Zn1-xMnx Se (x?=?0 and 0.25) under high pressure

High-pressure phase transition and electronic structure of Zn_1-xMn_xSe (x = 0 and 0.25) were calculated by using a first-principles method based on density functional theory. Zn_0.75Mn_0.25Se was found to be antiferromagnetic in both normal and high pressure states. Our calculated values of critical pressures are in good agreement with experimental results. The reduced enthalpy barriers along transition path in Zn_0.75Mn_0.25Se can explain well the fact that the transition pressure of Zn_0.75Mn_0.25Se is lower than that of pure ZnSe. More fundamentally, this stems from flexibility of Mn-3d orbitals in the transition state. The change of electronic structure from semiconductors to metals, accompanying the structural transition, was ascribed to appearance of extended 4s electrons of Zn/Mn atoms.     

Control of the temperature hysteresis and diffuse dielectric anomaly in the temperature range of the ferroelectric-antiferroelectric phase transition in PbZr1 − x TixO3 (0.03 ≤ x ≤ 0.05) ceramics

The magnitudes of the temperature hysteresis and diffuse dielectric anomaly corresponding to the transition from the antiferroelectric phase to the ferroelectric phase in PbZr_{1 ? x} Ti_xO₃ (0.03 ≤ x ≤ 0.05) ceramics can be reversibly changed by varying the temperatures of heating and cooling in the course of thermocycling. The results obtained indicate that the antiferroelectric-ferroelectric transition in the PbZr_{1 ? x} Ti_xO₃ ceramics materials is a smeared first-order phase transition.     

Phase transition, structural and electrical properties of Pb(Zn1/3Nb2/3)O3-doped Pb(Ni1/3Nb2/3)O3-PbTiO3 ceramics prepared by solid-state reaction method

Phase pure perovskite (1−x−y)Pb(Ni_1/3Nb_2/3)O₃-xPb(Zn_1/3Nb_2/3)O₃-yPbTiO₃ (PNN-PZN-PT) ferroelectric ceramics were prepared by conventional solid-state reaction method via a B-site oxide mixing route. The PNN-PZN-PT ceramics sintered at the optimized condition of 1185 °C for 2 h exhibit high relative density and rather homogenous microstructure. With the increase of PbTiO₃ (PT) content, crystal structure and electrical properties of the synthesized PNN-PZN-PT ceramics exhibit successive phase transformation. A morphotropic phase boundary (MPB) is supposed to form in (0.9−x)PNN-0.1PZN-xPT at a region of x=32-36 mol% confirmed by X-ray diffraction (XRD) measurement and dielectric measurement. The MPB composition can be pictured as providing a “bridge” connecting rhombohedral ferroelectric (FE) phase and tetragonal one since crystal structure of the MPB composition is similar to both the rhombohedral and tetragonal lattices. Dielectric response of the sintered PNN-PZN-PT ceramics also exhibits successive phase-transition character. 0.64PNN-0.1PZN-0.26PT exhibits broad, diffused and frequency dependent dielectric peaks indicating a character of diffused FE-paraelectric (PE) phase transition of relaxor ferroelectrics and 0.40PNN-0.1PZN-0.50PT exhibits narrow, sharp and frequency independent dielectric peaks indicating a character of first-order FE-PE phase transition of normal ferroelectrics. The FE-PE phase transition of 0.56PNN-0.1PZN-0.34PT is nearly first-order with some diffused character, which also exhibits the largest value of piezoelectric constant d₃₃ of 462pC/N.     

Valence transition behavior of the doped Falicov-Kimball model at nonzero temperatures

The extrapolation of small-cluster exact-diagonalization calculations is used to study the influence of doping on valence transitions in the spinless Falicov-Kimball model at nonzero temperatures. Two types of doping are examined, and namely, the substitution of rare-earth ions by nonmagnetic ions that introduce (i) one or (ii) none additional electron (per nonmagnetic ion) into the conduction band. It is found that the first type of substitution increases the average f-state occupancy of rare-earth ions, whereas the second type of substitution has the opposite effect. The results obtained are used to describe valence transition behavior of samarium in the hexaboride solid solutions Sm_1−xM_xB₆ (M=Y³⁺, La³⁺, Sr²⁺, Yb²⁺) and a very good agreement of theoretical and experimental results is found.     

Phase transition and linear thermal expansion of (Pb1− x Ba x )ZrO3 ceramics

(Pb_{1? x} Ba _x )ZrO₃ ceramics for the composition range 0?≤?x?≤?0.30 were prepared by the mixed oxide solid state reaction method. Phase transition was studied by dielectric and dilatometric measurements. The ferroelectric to paraelectric phase transition temperature was progressively shifted to a lower temperature by replacing lead with barium. The x?=?0.20 sample showed the maximum dielectric constant of 16,300 at the transition temperature. For compositions 0?≤?x?≤?0.075, the antiferroelectric to ferroelectric phase transition exhibited a large linear thermal expansion. However, the antiferroelectric to ferroelectric phase transition did not exist for 0.10?≤?x?≤?0.30 samples. A phase diagram for PBZ ceramics prepared by the conventional mixed oxide method was also present.     

The suppression of structural phase transformation in LaVO3 and La1−xSrxVO3 thin films fabricated by pulsed laser deposition

Highly oriented (100) thin films of LaVO₃ and La_1−xSr_xVO₃ have been fabricated by pulsed laser deposition in a reducing atmosphere. The films show a transition from insulating to metallic behaviour in the composition region of x, 0.175<x<0.200. In the single crystals of the antiferromagnetic insulating phase, a first-order structural phase transition is observed few degrees below the magnetic transition, which manifests itself as a kink in the temperature dependence of resistivity. In the highly oriented thin films of LaVO₃ and La_1−xSr_xVO₃ fabricated on lattice matched substrates in this study, the structural phase transformation in the insulating phase has been suppressed. The electrical conduction is found to take place via hopping through localized states at low temperatures. The metallic compositions show a non-linear (T^1.5) behaviour in the temperature dependence of resistivity. V (2p) core level spectra of these films show a gradual change in the relative intensities of V³⁺ and V⁴⁺ ions as the value of x increases.     

Metastable (III–V)1−xIV2x alloys

Zincblende-to-diamond-lattice structural phase transitions should occur in metastable (III–V)_1?xIV_2x alloys at a transition composition x_c that is controllable by growth conditions. The effect of this transition should be visible both in the electronic as well as the vibrational properties of these alloys. For example, in the prototypical (III–V)_1?xIV_2x alloy, (GaAs)_1?xGe_2x, the observed anomalous V-shaped bowing of the direct gap is explained in terms of the phase transition, which occurs at the minimum of the “V.” Predictions are made for the band gaps of new metastable alloys, such as (GaSb)_1?xSn_2x. Consequences of this transition for (III–V)-IV superlattices are also discussed.     

Modification of dielectric relaxations in sodium bismuth titanate with samarium doping

Na_0.5Bi_(0.5−x) Sm_xTiO₃ (NBST) ceramics with x=0.05, 0.1, and 0.15 are prepared through chemical route. The X-ray diffraction studies confirmed the formation of single phase. Dielectric measurements in the temperature region ranging from room temperature (∼30 °C) to 600 °C at different frequencies (10 kHz-1 MHz) showed anomalies at 130, 306, and 474 °C (at 10 kHz frequency) for x=0.05 sample. Other samples showed only two peaks. To establish the electrical nature of these relaxations, impedance measurements are done at different temperatures and frequencies. The relaxation time, obtained from both impedance and modulus data, is found to decrease with increase in temperature. The relaxations observed are of non-Debye type. Increase in samarium content increases the activation energy for relaxation.     

Role of Mn doping for obtaining of hexagonal phase in Ba0.98Zn0.02TiO3 ceramics

This paper reports the observation of hexagonal phase of barium titanate by Mn doping and its effect on dielectric and magnetic properties. Ceramic samples of Ba_0.98Zn_0.02Ti_1−xMn_xO₃ (where, x= 0.04, 0.06 and 0.08) were prepared by traditional solid-state reaction route. The hexagonal phase is stabilized in the composition Ba_0.98Zn_0.02Ti_0.92Mn_0.08O₃ and a very feeble M–H loop is also observed in that composition. This induced magnetism is expected due to the exchange interactions between magnetic polarons formed by oxygen vacancies with Mn ions. The dielectric constant as well as the ferroelectric to paraelectric transition temperature is systematically decreased with increasing of Mn doping concentration. Further to that, the temperature dependent dielectric constant curve is also broadened at transition temperature with increasing of Mn concentration. However, the ferroelectric to paraelectric transition temperature is well above room temperature.     

Effect of Cr doping on the magnetic and electrical transport properties of charge-ordered Bi0.5Ca0.5MnO3

An experimental study on the magnetic and electrical transport properties of the manganites Bi_0.5Ca_0.5Mn_1−xCr_xO₃ (BCMCO) (0≤x≤0.12) is carried out. The results show that Cr doping can suppress the charge-ordering transition, favoring the ferromagnetic clusters. For x=0.12, the charge-ordering transition disappears but a very broad paramagnetic-ferromagnetic-like transition is detected at the Curie temperature T_C=72.6 K. It is caused by phase separation or coexistence of the charge-ordering and ferromagnetic phase. Moreover, the critical Cr content to destroy charge ordering phase in BCMCO does not match the general monotonous tendencies shown by Cr-doped Re_0.5Ca_0.5MnO₃ (Re-rare-earth). These differences are ascribed to the fact that the ground state in BCMCO differs markedly from the ferromagnetic metallic phase in Cr-doped Re_0.5Ca_0.5MnO₃ compounds.     

Dielectric properties and specific heat of Bi<Subscript>1–<Emphasis Type="Italic">x</Emphasis> </Subscript>Sm<Subscript> <Emphasis Type="Italic">x</Emphasis> </Subscript>FeO<Subscript>3</Subscript> multiferroics

The specific heat and dielectric permittivity of Bi_1–xSm_xFeO₃ (x = 0–0.30) multiferroics have been studied in the temperature range of 300–800 K. A slight substitution of bismuth with samarium is established to cause a considerable shift in the antiferromagnetic phase transition temperature and to an increase in the specific heat over a wide temperature range. Other anomalies typical of phase transitions have been found in the temperature dependences of the specific heat and dielectric permittivity for the compounds with x = 0.10 and 0.15 at T ≈ 735 and 495 K, respectively. The results of the studies of the specific heat have been discussed together with the data of the structural investigations.