Mesoporous (ZrO2-TiO2)/Al2O3 ternary carriers as hydrodesulfurization catalysts support

Ternary systems at various compositions were synthesized by coprecipitating Zr and Ti (to get a ZrO₂-TiO₂ 40-60 mol%) chlorides in aqueous basic media (provided by urea thermal decomposition) over an alumina substrate. Materials characterization included N₂ physisorption, X-ray diffraction, thermal analysis, high-resolution electron microscopy and Raman and UV-vis spectroscopies. High interaction among components was clearly evidenced by various techniques. Textural properties of ternary oxides could be tuned depending on composition of formulations. Mixed oxides with 10 or 20 mol% of ZrO₂-TiO₂ (at 40-60% mol, in turn) had the most suitable combination of textural properties (surface area, average pore diameter and pore volume) for the intended application (support of catalyst for hydrodesulfurization de oil-derived middle distillates). The suitability of those ternary supports was demonstrated in the dibenzothiophene hydrodesulfurization where the corresponding supported MoS₂ catalysts (at 2.8 atom Mo nm⁻²) were much more active (on a per mass of catalyst basis) than when impregnated over either alumina or zirconia-titania oxides.     

Cationic starch as a precursor to prepare porous activated carbon for application in supercapacitor electrodes

Three activated carbons (ACs) for the electrodes of supercapacitor were prepared from cationic starch using KOH, ZnCl₂ and ZnCl₂/CO₂ activation. The BET surface area, pore volume and pore size distribution of the ACs were evaluated using density functional theory method, based on N₂ adsorption isotherms at 77 K. The surface morphology was characterized with SEM. Their electrochemical performance in prototype capacitors was determined by galvanostatic charge/discharge characteristics and cyclic voltammetry, and compared with that of a commercial AC, which was especially prepared for use in supercapacitors. The KOH-activated starch AC presented higher BET surface area (3332 m² g⁻¹) and larger pore volume (1.585 cm³ g⁻¹) than those of the others, and had a different surface morphology. When used for the electrodes of supercapacitors, it exhibited excellent capacitance characteristics in 30 wt% KOH aqueous electrolytes and showed a high specific capacitance of 238 F g⁻¹ at 370 mA g⁻¹, which was nearly twice that of the commercial AC.     

Graphite nanosheets doped with Fe, Ni, and N, synthesized in one step, and their unique magnetic performance

Graphite nanosheets (GNs) doped with N, Fe, or Ni were synthesized by pyrolysis of metal tetrapyridinoporphyrazine (MPTpz, M=Fe²⁺, and Ni²⁺) and a mixture of MPTpzs in a chemical vapor deposition furnace. The products obtained were characterized by scanning and transmission electron microscopy, and X-ray photoelectron spectroscopy. The magnetic properties of the GNs obtained were investigated at room temperature using a vibrating sample magnetometer with an applied field of −10 000-10 000 Gs. The results show the GNs obtained are terrace-like and ultra-thin, with very high aspect ratio. Fe, Ni and N atoms have been doped to the GNs successfully. There are two types of N atom that are introduced into pure carbon systems: pyrinidic and graphitic N atoms. The GNs obtained exhibit ferromagnetic behavior at room temperature. Sample S1, obtained by pyrolysis of a mixture of MPTpzs (M=Fe²⁺ and Ni²⁺), have the highest coercivity force. The saturation magnetization (M_s), remanent magnetization (M_r), and coercivity (H_c) values of sample S1 are 24.51 emu g⁻¹, 3.95 emu g⁻¹, and 207.34 Gs, respectively.     

A general and low-cost synthetic route to high-surface area metal oxides through a silica xerogel template

Porous metal oxides with a large surface area are synthesised by means of a procedure based on the templating approach. An inexpensive porous silica xerogel synthesised at moderate temperatures (∼100 °C) in order to preserve the silanol superficial groups was used as template. In a first step, the silica porosity was filled with a concentrated solution containing a metallic salt. Then, the impregnated sample was calcined in air at a temperature of 600 °C. Under these conditions, the metal oxides were synthesised within the confined space provided by the silica pores. Finally, the product was recovered after dissolution of the silica framework in 2 M NaOH solution. The materials obtained by this procedure are made up of aggregates of nanoparticles and/or 3D solid structures containing confined pores. In this work, the synthetic route proposed is illustrated by the preparation of various binary metal oxides (i.e. Fe₂O₃, Cr₂O₃, NiO, CeO₂, Mn₂O₃, Co₂O₃ and Al₂O₃). The BET surface areas measured for these materials are in the range of 100-270 m² g⁻¹. The proposed method is not restricted to the binary metal oxides. It can also be used in the preparation of other inorganic materials such as metal sulphides or mixed metal oxides.     

Characterisation of the Ru/MgF2 catalyst with adsorbed O2, NO, CO probe molecules by EPR and IR spectroscopy

Electron paramagnetic resonance (EPR) and infrared (IR) spectroscopy were used to study the formation of ruthenium and adsorbed species appearing on the catalyst during O₂, NO, and CO adsorption at room temperature on 1 wt% Ru/MgF₂ catalysts prepared from Ru₃(CO)₁₂ . Both EPR and IR results provided clear evidence for the interaction between surface ruthenium and probe molecules. No EPR signals due to ruthenium (Ru) species were recorded at 300 and 77 K after H₂-reduction of the catalyst at 673 K. However, at 4.2 K a very weak EPR spectrum due to low-spin (4d⁵) Ru³⁺ complexes was detected. A weak anisotropic O₂^- radicals signal with g_∣∣=2.017 and g_⊥=2.003 superimposed on a broad (ΔB_pp=120 mT), slightly asymmetric line at g=2.45(1) was identified after O₂ admission to the reduced sample. Adsorption of NO gives only a broad, Gaussian-shaped EPR line at g=2.43(1) indicating that the admission of NO, similarly to O₂ adsorption, brings about an oxidation of Ru species in the course of the NO decomposition reaction. Introduction of NO over the CO preadsorbed catalyst leads to EPR spectrum with parameters g_⊥=1.996, g_∣∣=1.895, and A_⊥^N=2.9 mT assigned to surface NO species associated with Ru ions. The IR spectra recorded after adsorption of NO or CO probe molecules showed the bands in the range of frequency characteristic of ruthenium nitrosyl, nitro, and nitrate/nitrite species and the bands characteristic of ruthenium mono-and multicarbonyls, respectively. Addition of CO after NO admission to the catalyst leads to appearance in the IR spectrum, beside the ones characteristic of NO adsorption, the bands which can be attributed to Ru-CO₂ and Ru-NCO species, indicating that the reaction between NO and CO occurs. These species were also detected after CO adsorption followed by NO adsorption, additionally to the band at 1850 cm⁻¹ being due to cis-type species.     

Synthesis and magnetic properties of Au-coated amorphous Fe20Ni80 nanoparticles

Gold-coated nanoparticles of Fe₂₀Ni₈₀ (permalloy) have been synthesized by a microemulsion process. The as-prepared samples consist of ∼5 nm diameter particles of amorphous Fe₂₀Ni₈₀ that are likely encapsulated in B₂O₃. One or more Fe₂₀Ni₈₀@B₂O₃ particles are subsequently encapsulated in 8-20 nm gold nanospheres, as determined by TEM and X-ray powder diffraction (XRD) line broadening. The gold shells were found to be under expansive strain. Magnetic data confirm the existence of a superparamagnetic phase with a blocking temperature, T_B, of ∼33 K. The saturation magnetization, M_S, of the as-prepared, Au-coated sample is ∼65 emu g⁻¹ at 5 K and ∼16 emu g⁻¹ at 300 K. The coercivity, H_C, is ∼280 Oe at 5 K.     

High specific surface area TEOS-based aerogels with large pore volume prepared at an ambient pressure

The experimental results on the synthesis of tetraethoxysilane (TEOS)-based silica aerogel with high specific surface area and large pore volume, via ambient pressure drying (APD) route, are reported. The silica aerogels were prepared by the acid-base sol-gel polymerization of TEOS precursor followed by the drying of the alcogels at an ambient pressure. The solvent present in the alcogel (i.e. ethanol) was replaced by a non-polar solvent such as hexane prior to the surface modification step. In order to minimize the drying shrinkage, the surface of the gels was modified using trimethylchlorosilane (TMCS) before the APD. The FTIR spectra of the surface modified aerogels showed Si-CH₃ peaks at 2965 and 850 cm⁻¹. The effect of the base catalyst (NH₄OH) addition to the sol, at different time intervals (T), on the physical and textural properties of the resulting aerogels has been investigated. It has been observed that the surface area and the cumulative pore volume of the aerogels enhanced considerably from 819 to 1108 m² g⁻¹ and 2.65 to 4.7 cm³ g⁻¹, respectively with an increase in the T value from 6 to 48 h. Silica aerogels with very low bulk density (0.06 g cm⁻³), extremely high specific surface area (1108 m² g⁻¹) and large cumulative pore volume (4.7 cm³ g⁻¹) could be synthesized by drying the alcogels at the ambient pressure. The aerogels were mesoporous solids with the average pore size ranging from 12 to 17 nm. The results have been discussed by taking into consideration the hydrolysis and condensation reactions during the sol-gel polymerization of the TEOS precursor.     

Preparation and characterization of carbons for the retention of halogens in the condenser vacuum system of a thermonuclear plant

Activated carbons were prepared by air and carbon dioxide activation, from almond tree pruning, with the aim of obtaining carbons that reproduce the textural and mechanical properties of the carbons currently used in the filtering system of the condenser vacuum installation of a Thermonuclear Plant (CNA; Central Nuclear de Almaraz in Caceres, Spain), produced from coconut shell. The variables studied in non-catalytic gasification series with air were the temperature (215-270 °C) and the time (1-16 h) and the influence of the addition of one catalyst (Co) and the time (1-2 h) in catalytic gasification. In the case of activation with CO₂, the influence of the temperature (700-950 °C) and the time (1-8 h) was studied. The resulting carbons were characterized in terms of their BET surface, porosity, and pore size distribution. The N₂ adsorption isotherms at 77 K for both series showed a type I behaviour, typical of microporous materials. The isotherms showed that with both gasificant agents the temperature rise produced an increase in the carbon porosity. With regards to the activation time, a positive effect on the N₂ adsorbed volume on the carbons was observed. The best carbons of each series, as well as the CNA (carbon currently used in the CNA), were characterized by mercury porosimetry and iodine solution adsorption isotherms. The results obtained allowed to state that several of the carbons produced had characteristics similar to the carbon that is target of reproduction (which has S_BET of 741 m² g⁻¹, V_mi of 0.39 cm³ g⁻¹ and a iodine retention capacity of 429.3 mg g⁻¹): carbon C (gasification with CO₂ at 850 °C during 1 h), with S_BET of 523 m² g⁻¹, V_mi of 0.33 cm³ g⁻¹ and a iodine retention capacity of 402.5 mg g⁻¹, and carbon D (gasification with CO₂ at 900 °C during 1 h), whose S_BET is 672 m² g⁻¹, V_mi is 0.28 cm³ g⁻¹ and has a iodine retention capacity of 345.2 mg g⁻¹.     

Effect of Bi2O3 on EPR, optical transmission and DC conductivity of vanadyl doped alkali bismuth borate glasses

Glasses with composition xBi₂O₃·(30−x)M₂O·70B₂O₃ (M=Li, Na) containing 2 mol% V₂O₅ have been prepared over the range 0≤x≤15 (x is in mol%). The electron paramagnetic resonance spectra of VO²⁺ of these glasses have been recorded in the X-band (≈9.3 GHz) at room temperature (RT≈300 K). Spin Hamiltonian parameters, g_∥, g_⊥, A_∥, A_⊥, dipolar hyperfine coupling parameter, P, and Fermi contact interaction parameter, K, have been calculated. The molecular orbital coefficients, α² and γ², have been calculated by recording the optical transmission spectra. In xBi₂O₃·(30−x)Li₂O·70B₂O₃ glasses there is decrease in the tetragonality of the V⁴⁺O₆ complex for x up to 6 mol% whereas for x≥6 mol%, tetragonality increases. In xBi₂O₃·(30−x)Na₂O·70B₂O₃ glasses there is increase in the tetragonality of the V⁴⁺O₆ complex with increasing x. The 3d_xy orbit expands with increase in Bi₂O₃:M₂O ratio. Values of the theoretical optical basicity, Λ_th, have also been reported. The DC conductivity increases with increase in temperature. The order of conductivity is 10⁻⁵ ohm⁻¹ m⁻¹ at low temperature and 10⁻³ ohm⁻¹ m⁻¹ at high temperature. The DC conductivity decreases and the activation energy increases with increase in Bi₂O₃:M₂O ratio.     

Preparation of highly ordered mesoporous AlSBA-15-SO3H hybrid material for the catalytic synthesis of chalcone under solvent-free condition

Single-step preparation of SBA-15 materials functionalized with both propylsulfonic acid groups and aluminum species (AlSBA-15-SO₃H) was carried out by hydrothermal treatment of a mixture of aluminum isopropoxide, 3-mercaptopropyltriethoxysilane, tetraethoxysilane, and triblock copolymer surfactant. At Si/Al molar ratio of 11-96, the materials exhibited well-ordered hexagonally arranged mesopores with pore diameter of ca. 9 nm, BET surface area of 546.9-666.0 m² g⁻¹, and pore volume of 0.82-1.03 cm³ g⁻¹. As-prepared AlSBA-15-SO₃H was successfully used in the Claisen-Schmidt condensation reaction of benzaldehyde with acetophenone to produce chalcone under solvent-free condition, and the influence of the reaction parameters including temperatures, molar ratios of BZD to APN, and aluminum loadings were considered during the chalcone synthesis procedure. It showed that AlSBA-15-SO₃H exhibited significantly high catalytic activity and selectivity, outperforming the reference catalysts such as sulfuric acid, ZSM-5, and acidic MCM-49. In addition, the catalytic stability and regeneration of AlSBA-15-SO₃H was studied.     

Highly selective epoxidation of styrene over mesoporous Au-Ti-SBA-15 via photocatalysis process: Synthesis, characterization, and catalytic application

Highly ordered Au-Ti-SBA-15 mesoporous molecular sieves were successfully synthesized by one-pot hydrothermal synthesis in acid medium, and were characterized by XRD, UV-vis, SEM, element-mapping, HRTEM, N₂ adsorption, XPS, ²⁹Si MAS NMR, NH₃-TPD and FT-IR. The as-prepared Au-Ti-SBA-15 samples were possessed of highly ordered mesostructures with larger pore diameter, pore volume and uniform mesopore size distribution. In the oxidation of styrene with H₂O₂ as the oxidant over Au-Ti-SBA-15 catalyst under photo-irradiation, reaction parameters, such as molar ratio of H₂O₂ to styrene, reaction time, solvent, the amount of catalyst, catalyst species, and the amount of 3% NaOH, were conditioned at length. As a result, highly selective epoxidation of styrene over catalyst was carried out perfectly for 10 min with high TOF of 4.75 × 10³ min⁻¹.     

Low-temperature vibrational properties of KGd(WO4)2: (Er, Yb) single crystals studied by Raman spectroscopy

Temperature-dependent polarized Raman spectra of KGd(WO₄)₂: (Er, Yb) single crystals have been analyzed over the 77-292 K temperature range. The A_g and B_g spectra obtained are discussed in terms of factor group analysis. The spectra have been found to reveal the bands related to internal and external vibrations of WO₄²⁻, WOW and WOOW molecular groups. Strong depolarization of the majority of the Raman bands has been observed in the whole temperature range. Some anomalies in the spectral parameters of selected Raman bands below 175 K have been discussed in terms of the local distortion of WO₄²⁻ ions in KGd(WO₄)₂: (Er, Yb) crystals.     

In-situ XAS study on the Cu and Ce local structural changes in a CuO-CeO2/Al2O3 catalyst under propane reduction and re-oxidation

The redox behaviour of a CuO-CeO₂/Al₂O₃ catalyst is studied under propane reduction and re-oxidation. The evolution of the local Cu and Ce structure is studied with in-situ transmission X-ray absorption spectroscopy (XAS) at the Cu K and Ce L₃ absorption edges.CuO and CeO₂ structures are present in the catalyst as such. No structural effect on the local Cu structure is observed upon heating in He up to 873 K or after pre-oxidation at 423 K.Exposure to propane at reaction temperature (600-763 K) fully reduces the Cu²⁺ cations towards metallic Cu⁰. Quick EXAFS spectra taken during reduction show a small amount of intermediate Cu¹⁺ species. Parallel to the CuO reduction, CeO₂ is also reduced in the same temperature range. About 25% of the Ce⁴⁺ reduces rapidly to Ce³⁺ in the 610-640 K temperature interval, while beyond 640 K a further slower reduction of Ce⁴⁺ to Ce³⁺ occurs. At 763 K, Ce reduction is still incomplete with 32% of Ce³⁺.Re-oxidation of Cu and Ce is fast and brings back the original oxides.The propane reduction of the CuO-CeO₂/Al₂O₃ catalyst involves both CuO and CeO₂ reduction at similar temperatures, which is ascribed to an interaction between the two compounds.     

Structural and magnetic properties of Mg(In2−xMnx)O4 system

We synthesized the Mn-doped Mg(In_2−xMn_x)O₄ oxides with 0.03?x?0.55 using a solid-state reaction method. The X-ray diffraction patterns of the samples were in a good agreement with that of a distorted orthorhombic spinel phase. Their lattice parameters and unit-cell volumes decrease with x due to the substitution of the smaller Mn³⁺ ions to the larger In³⁺ ions. The undoped MgIn₂O₄ oxide presents diamagnetic signals for 5 K?T?300 K. The M(H) at T=300 K reveals a fairly negative-sloped linear relationship. Neither magnetic hysteresis nor saturation behavior was observed in this parent sample. For the Mn-doped samples, however, positive magnetization were observed between 5 and 300 K even if the x value is as low as 0.03. The mass susceptibility enhances with Mn content and it reaches the highest value of 1.4×10⁻³ emu/g Oe (at T=300 K) at x=0.45. Furthermore, the Mn-doped oxides with x=0.06 and 0.2, respectively, exhibit nonlinear magnetization curves and small hysteretic loops in low magnetic fields. Susceptibilities of the Mn-doped samples are much higher than those of MnO₂, Mn₂O₃ oxides, and Mn metals. These results show that the oxides have potential to be magnetic semiconductors.     

Influence of B2O3 to the inhomogeneous broadening and spectroscopic properties of Er/Yb codoped fluorophosphate glasses

In a three-components fluorophosphate glass system, the introduction of H₃BO₃ brings some valuable influence to the spectroscopic and thermal properties of the glasses. With H₃BO₃ increases from 2 to 20 mol%, Ω₆, S_ed4I13/2, FWHM, T_g and fluorescence lifetime change from 3.21×10⁻²⁰ cm², 1.77×10⁻²⁰ cm², 45 nm, 480 °C and 8.8 ms to 4.66×10⁻²⁰ cm², 2.11×10⁻²⁰ cm², 50 nm, 541 °C and 7.4 ms, respectively. σ_abs, σ_emi, FWHM×τ_f×σ_emi has a maximum when H₃BO₃ is 11 mol%. T_g and T_x−T_g increases with H₃BO₃ introduction. Results showed that in fluorophosphate glasses, proper amount of B₂O₃ can be used as a modifier to suppress upconversion and improve spectroscopic properties, broadband property and crystallization stability of the glasses while keeps the fluorescence lifetime relatively high.     

Synthesis of nanocrystalline and mesoporous zinc sulphide from a single precursor Zn(SOCCH3)2Lut2 complex

We report the formation of mesoporous zinc sulphide, composed by the fine network of nanoparticles, which was formed via a single precursor Zn(SOCCH₃)₂Lut₂ complex. The complex was chemically synthesized using zinc carbonate basic, 3,5-lutidine and thioacetic acid, in air. The metal precursor complex was characterized using different conventional techniques. Thermogravimetric analysis (TGA) result indicates that the decomposition of the complex starts at 100 °C and continues up to 450 °C, finally yielding ZnS. ZnS nanocrystals were characterized by powder X-ray diffraction (XRD) technique, field emission scanning electron microscopy (FESEM), N₂-sorption isotherm, UV-vis spectroscopy and photoluminescence (PL) spectroscopy. The grain diameter of nanocrystals was found to be 4-5 nm. The material followed Type-IV N₂-sorption isotherm, which is the characteristic of mesoporous materials. The band gap energy, as obtained from optical measurements was around 3.8 eV.     

Tetrahedral coordination for Zn in hexacyanometallates: Structures of Zn3A2[M(CN)6]2·xH2O with A=K, Rb, Cs and M=Ru, Os

Zinc hexacyanoruthenate (II) and hexacyanoosmate (II) were prepared and studied from X-ray diffraction (XRD), infrared (IR), and thermogravimetric (TG) data. These compounds were found to be isomorphous with the iron analogues, crystallizing with a rhombohedral unit cell (R−3c space group), where the zinc atom has tetrahedral coordination to N ends of CN groups. For Cs, compounds with formula unit ZnCs₂[M(CN)₆] and a cubic unit cell (Fm−3m) were also obtained. The crystal structures for the eight compositions were refined from the corresponding X-ray powder diffraction patterns using the Rietveld method. Related to the tetrahedral coordination for the Zn atom, the rhombohedral phase has a porous framework with ellipsoidal cavities of about 12.5×9×8 Å, communicated by elliptical windows of ∼5 Å. Within these cavities the exchangeable alkali metal ions are found. The filling of the cavity volume is completed with water molecules. IR spectrum senses certain charge delocalization from the inner metal, through the π-back donation mechanism. For Os compounds this effect is particularly pronounced, related to a more diffuse d orbitals for this metal.     

Porous LiNi0.75Co0.25O2 microspheres prepared via a hydrothermal process as cathode material for lithium ion batteries

Porous LiNi_0.75Co_0.25O₂ microspheres are successfully prepared by a simple hydrothermal process by using H[Ni_0.75Co_0.25OOH]₃ and LiOH as starting materials in the presence of urea for the first time. The synthesized samples are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), specific surface area (S_BET), and electrochemical performance. The synthesized LiNi_0.75Co_0.25O₂ has a good electrochemical performance with an initial discharge capacity of 169.3 mA g⁻¹ and good capacity retention of 96.7% after 50 cycles at 0.2 C (25 mA g⁻¹). The electrochemical lithium ion insertion/extraction process is quite reversible even at 5 C. Furthermore, the structure in the charge-discharge process is stable and the impedance increased slowly during cycling.     

Indofluorides in the AMF3-InF3 systems (A=K, Rb, Cs and M=Mg, Zn) and optical properties of Cr:K0.38Mg0.38In0.62F3

Among the fluorides disclosed in the AMF₃-InF₃ systems (A=K, Rb, Cs/M=Mg, Zn), the most favorable material for optical applications in relation with the optical quality of its crystals is K_0.38Mg_0.38In_0.62F₃ (KMI), a distorted monoclinic Magnéli-bronze, which crystals are grown from the melt. Cr³⁺ introduced in this host is optically characterized by optical spectroscopy. The chromium ions in the single crystals occupy simultaneously centrosymmetric and non-centrosymmetric sites. The broad emission band (⁴T_2 g→⁴A_2 g transition) obtained in the near infrared range is characteristic of a small crystal field effect (Dq=1476 cm⁻¹). Crystal field analysis leads to a very good agreement between calculated and experimentally observed energy levels. Furthermore, dips observed in the absorption at about 15370 cm⁻¹ are related to the calculated mixing between the wave functions, connected with the ⁴T_2 g (⁴F) and ²E_g (²G) and ²T_1 g (²G) electronic levels.     

Stable cycle-life properties of Ti-doped LiFePO4 compounds synthesized by co-precipitation and normal temperature reduction method

Submicron-sized LiFePO₄ and Ti-doped LiFePO₄ cathode materials were synthesized by a reformative co-precipitation and normal temperature reduction method, for which Ti ions were added in the process of preparing precursors to pursue a kind of sufficient and homogenous doping way. ICP and XRD analyses indicate that Ti ions were sufficiently doped in LiFePO₄ and did not alter its crystal structure. It is noted that higher Ti ions doping levels are conducive to electrochemical performance of LiFePO₄, especially on the aspect of stable cycle-life at higher C rates. The sample doped with 3 at% Ti shows the most impressive cycling performance, even after 100 cycles, discharge capacity of 133 mAh g⁻¹ was obtained (102.3% of its initial value) at 1C rate, and the discharge decreased little from 124 to 120 mAh g⁻¹ (96.8% of its initial value) at 2C rate.