First-principles studies of the electronic structure and optical properties of AgBO<Subscript>3</Subscript> (B=Nb,Ta) in the paraelectric phase

The electronic energy-band structure, density of states (DOS), and optical properties of AgBO₃ in the paraelectric cubic phase have been studied by using density functional theory within the local density approximation for exchange-correlation for the first time. The band structure shows a band gap of 1.533 eV (AgNbO₃)and 1.537 eV (AgTaO₃)at (M-⌈)point in the Brillouin zone. The optical spectra of AgBO₃ in the photon energy range up to 30 eV are investigated under the scissor approximation. The real and imaginary parts of the dielectric function and — thus the optical constants such as reflectivity, absorption coefficient, electron energy-loss function, refractive index, and extinction coefficient — are calculated. We have also made some comparisons with related experimental and theoretical data that is available.      

Electronic structure and optical properties of ordered compounds potassium tantalate and potassium niobate and their disordered alloys

The electronic energy band structure, site and angular momentum decomposed density of states (DOS) of cubic perovskite oxides KNbO₃ and KTaO₃ have been obtained from a first principles density functional based full potential linearized augmented plane wave (FLAPW) method within a generalized gradient approximation (GGA). The total DOS in valence region is compared with the experimental photo-emission spectra (PES). The calculated DOS is in good agreement with the experimental energy spectra and the features in the spectra are interpreted by comparison with the projected density of states (PDOS). The valence band PES is mainly composed of Nb-4d/Ta-5d and O 2p states in KNbO₃ and KTaO₃, respectively. Using the PDOS and the band structure we have analyzed the inter-band contribution to the optical properties of these materials. The real and imaginary parts of the dielectric function have been calculated and compared with experimental data. They are found to be in a reasonable agreement. The role of band structure on the optical properties have been discussed.     

First principles study of the electronic and optical properties of SbTaO4

The electronic density of states (DOS), band structure and optical properties of orthorhombic SbTaO₄ are studied by first principles full potential-linearized augmented plane wave (FP-LAPW) method. The calculation is done in the framework of density functional theory with the exchange and correlation effects treated using generalized gradient approximation (GGA). We find an indirect band gap of 1.9 eV at the R→Γ symmetry direction of the Brillouin zone in SbTaO₄. It is observed that there is a strong hybridization between Ta-5d and O-2p electronic states which is responsible for the electronic properties of the system. Using the projected DOS and band structure we have analyzed the interband contribution to the optical properties of SbTaO₄. The real and imaginary parts of the dielectric function of SbTaO₄ are calculated, which correspond to electronic transitions from the valence band to the conduction band. The band gap obtained is in close agreement with the experimental data.     

Structural, electronic and optical properties of orthorhombic distorted perovskite TbMnO3

This paper calculates the structural parameters, electronic and optical properties of orthorhombic distorted perovskite-type TbMnO3 by first principles using density functional theory within the generalised gradient approximation. The calculated equilibrium lattice constants are in a reasonable agreement with theoretical and experimental data. The energy band structure, density of states and partial density of states of elements are obtained. Band structures show that TbMnO3 is an indirect band gap between the O 2p states and Mn 3d states, and the band gap is of 0.48 eV agreeing with experimental result. Furthermore, the optical properties, including the dielectric function, absorption coefficient, optical reflectivity, refractive index and energy loss spectrum are calculated and analysed, showing that the TbMnO3 is a promising dielectric material.     

First principles study of electronic structure and optical properties of CaTiO3

The electronic-energy band structure, site and angular momentum decomposed density of states (DOS) and charge-density contours of perovskite CaTiO ₃ are calculated by the first principles tight-binding linear muffin-tin orbitals method with atomic sphere approximation using density functional theory in its local density approximation. The calculated band structure shows an indirect (R-Γ) band gap of 1.5 eV. The total DOS as well as the partial density of states (PDOS) are compared with the experimental photoemission spectra. The calculated DOS are in reasonable agreement with the experimental energy spectra and the features in the spectra are interpreted by a comparison of the spectra with the PDOS. The origin of the various experimentally observed bands have been explained. From the DOS analysis, as well as charge-density studies, we conclude that the bonding between Ca and TiO ₃ is mainly ionic and that the TiO ₃ entities bond covalently. Using the projected DOS and band structure we have analyzed the interband contribution to the optical properties of CaTiO ₃ . The real and imaginary parts of the dielectric function and hence the optical constants such as refractive index and extinction coefficient are calculated. The calculated spectra are compared with the experimental results for CaTiO ₃ and are found to be in good agreement with the experimental results. The effective number of electrons per unit cell participating in the interband transitions are calculated. The role of band structure calculation as regards the optical properties of CaTiO ₃ is discussed. Received 1 February 2000 and Received in final form 21 July 2000     

First-principles study of structural, elastic, electronic, and optical properties of hexagonal BiAlO3

The structural parameters, elastic, electronic, and optical properties of hexagonal BiAlO₃ were investigated by the density functional theory. The calculated structural parameters are in good agreement with previous calculation and experimental data. The structural stability of BiAlO₃ has been confirmed by calculation of the elastic constants. The energy band structure, density of states, and Mulliken charge populations were obtained. BiAlO₃ presents an indirect band gap of 3.28 eV. Furthermore, the optical properties were calculated and analyzed. It is shown that BiAlO₃ is a promising dielectric material.     

Band structure of tetragonal BaTiO <Emphasis Type="Bold">3</Emphasis>

The electronic structure, total density of states DOS and electronic density in ferroelectric tetragonal crystal BaTiO₃ are studied using WIEN2k package. This employs the full potential-linearized augmented plan wave FP-LAPW method in the framework of the density functional theory DFT with the generalized gradient approximation (GGA). The results show an indirect band gap of 2.30 eV at the Γ point in the Brillouin zone. The calculated band structure and density of states of BaTiO₃ agree with the previous experimental and theoretical results, as do the charge distribution and the prediction of the nature of the chemical bonding. Received 11 December 2002 / Received in final form 3 February 2003 Published online 1st April 2003 RID="a" ID="a"e-mail: salehihamid@yahoo.com     

First-principles study of structural, elastic, electronic and optical properties of SrMO3 (M=Ti and Sn)

We present structural, elastic, electronic and optical properties of the perovskites SrMO₃ (M=Ti, and Sn) for different pressure. The computational method is based on the pseudo-potential plane wave method (PP-PW). The exchange-correlation energy is described in the generalized gradient approximation (GGA). The calculated equilibrium lattice parameters are in reasonable agreement with the available experimental data. This work shows that the perovskites SrTiO₃, and SrSnO₃ are mechanically stable and present an indirect band gaps at the Fermi level. Applied pressure does not change the shape of the total valence electronic charge density and most of the electronic charge density is shifted toward O atom. Furthermore, in order to understand the optical properties of SrMO₃, the dielectric function, absorption coefficient, optical reflectivity, refractive index, extinction coefficient and electron energy-loss are calculated for radiation up to 80 eV. The enhancement of pressure decreases the dielectric function and refractive indices of SrTiO₃ and SrSnO₃.     

The electronic structure,electronic charge density and optical properties of the diamond-like semiconductor Ag2ZnSiS4

The electronic structure, electronic charge density and optical properties of the diamond-like semiconductor Ag₂ZnSiS₄ compound with the monoclinic structure have been investigated using a full-relativistic version of the full-potential augmented plane-wave method based on the density functional theory, within local density approximation (LDA), generalized gradient approximation (GGA), Engel–Vosko GGA (EVGGA) and modified Becke Johnson (mBJ) potential. Band structures divulge that this compound is a direct energy band gap semiconductor. The obtained energy band gap value using mBJ is larger than those obtained within LDA, GGA and EVGGA. There is a strong hybridization between Si-s and S-s/p, Si-p and Zn-s, Ag-s/p and Zn-s, and Ag-s and Ag-p states. The analysis of the site and momentum-projected densities shows that the bonding possesses covalent nature. The dielectric optical properties were also calculated and discussed in detail.     

Optical properties of anatase and rutile titanium dioxide: Ab initio calculations for pure and anion-doped material

The optical properties of rutile and anatase titanium dioxide (TiO₂) are calculated from the imaginary part of the dielectric function using pseudopotential density functional method within its generalized gradient approximation (GGA) and a scissors approximation. The fundamental absorption edges calculated for the unit cell of both rutile and anatase are consistent with experimentally reported results of single crystal rutile and anatase TiO₂ and with previous theoretical calculations. A significant optical anisotropy is observed in the anatase structure which holds promise for investigating the band gap modification with better visible-light response and provides a reliable foundation for addressing the effect of impurities on the fundamental absorption edge/band gap of anatase TiO₂. Further calculations on the electronic structure and the optical properties of C-, N-, and S-doped anatase TiO₂ are performed. The results are analyzed and discussed in terms of optical anisotropy and scissors approximations.     

DFT study on electronic structure and optical properties of N-doped,S-doped,and N/S co-doped SrTiO3

The electronic structures and optical properties of N-doped, S-doped and N/S co-doped SrTiO₃ have been investigated on the basis of density functional theory (DFT) calculations. Through band structure calculation, the top of the valence band is made up of the O 2p states for the pure SrTiO₃. When N and S atoms were introduced into SrTiO₃ lattice at O site, the electronic structure analysis shows that the doping of N and S atoms could substantially lower the band gap of SrTiO₃ by the presence of an impurity state of N 2p on the upper edge of the valence band and S 2p states hybrid with O 2p states, respectively. When the N/S co-doped, the energy gap has further narrowing compared with only N or S doped SrTiO₃. The calculations of optical properties also indicate a high photo response for visible light for N/S co-doped SrTiO₃. Besides, we find a new impurity state which separates from the O 2p states could improve the photocatalytic efficiency and we also propose a model for light electron-hole transportation which can explain the experiment results well. All these conclusions are in agreement with the recent experimental results.     

First principles study of half-metallic ferromagnetism in Cr-doped CdTe

We report a systematic study of the structural, electronic and magnetic properties of Cr-doped CdTe for various Cr concentrations x (=0.25, 0.5, 0.75 and 1.0) using first principles calculations based on the density functional theory (DFT). The electronic band structure of the alloy has been calculated using the Wu-Cohen (WC) as well as the Angel-Vosko (EV) generalized gradient approximation (GGA) for the exchange-correlation potential. The analysis of the density of states (DOS) curves shows the half-metallic ferromagnetic character with half-metallic gap more than 0.52 eV. While the origin of half-metallic ferromagnetism is explained, the band structure calculations are used to determine s (p)-d exchange constants N₀α (conduction band) and N₀β (valence band) that agree with typical magneto-optical experiment. It is found that the p-d hybridization reduces the magnetic moment of Cr from its free space charge value and produces small magnetic moments on the Cd and Te sites. Lastly, we discuss the robustness of half-metallicity with respect to the variation of lattice constants of the Cr_xCd_1−xTe alloys.     

A first-principles investigation of the properties of two predicted novel structures of Sn3P4

Two novel structures of Sn₃P₄ (t-Sn₃P₄ and o-Sn₃P₄) are presented in this study. For two novel phases, t-Sn₃P₄ and o-Sn₃P₄, the stabilities are verified based on the elastic constants and the phonon dispersion spectra. The phonon density of states (PHDOS), band structures, electronic density of states (DOS) and optical properties are investigated using density functional theory (DFT). o-Sn₃P₄ has better plasticity and stronger anisotropy than t-Sn₃P₄. The PHDOS in the lower frequency band is mainly derived from Sn atoms, and in the higher band it is mainly from P atoms. The band structure of t-Sn₃P₄ shows that it is a narrow indirect band gap semiconductor. And o-Sn₃P₄ presents a metallic characteristics. Below the Fermi level, the total DOS in the valence band originates mainly from P ‘p’ with the partial contribution from Sn ‘p’. The dielectric constants, conductivities, optical absorption, optical reflectivity, and energy loss functions of t-Sn₃P₄ and o-Sn₃P₄ are analyzed. For t-Sn₃P₄, the static dielectric constant is 12.66?F/m, the real part of conductivity reaches the maximum at 4.45?eV, and the peak in the loss function locates at about 15?eV. For o-Sn₃P₄, in order, they are 47.27?F/m, at 2.59?eV, and at 10.91?eV.     

The ab initio calculations of the doping Zr's influence on the electronic structure of AlCo2Ti

The electronic structures of the ternary (Hume-Rothery) L2₁-phase compound AlCo₂Ti are calculated by first-principles using full potential linearized augmented plane wave (FLAPW) method with the generalized gradient approximation (GGA). The ab initio results are analyzed with a simplified model for Al-based compounds containing transition metal (TM) atoms. The results show that the total DOS depends strongly on the positions of TM atoms, and the TM d DOS plays a crucial role in hybridization with other element valence electrons. However, the Al 3s states are repelled far away from the Fermi energy in studied sample, and the Al 3d states are far more extended-like in the character than the d states. Furthermore, the total DOS_s are modulated by Al 3p states and the Al 3p states are more sensitive than d states to change in the electronic interactions. Then, the Al 3p is also important for the ternary stability of the intermetallic compound. The Co-Ti interaction becomes stronger by the doping element Zr in the Al₄Co₈Ti₃Zr structure. Especially, the doping Al₄Co₈Ti₃Zr alloy has a larger value DOS at the Fermi level and makes the total DOS gap smaller than the AlCo₂Ti.     

Structural,electronic, optical and thermodynamic investigations of NaXF3 (X = Ca and Sr): First-principles calculations

The structural, electronic and optical properties for fluoro-perovskite NaXF₃ (X?=?Ca and Sr) compounds have calculated by WIEN2k code based on full potential linearized augmented plane wave (FP-LAPW) approach within density functional theory (DFT). To perform the total energy calculations, exchange-correlation energy/potential functional has been utilized into generalized gradient approximation (GGA) and local density approximation (LDA). Our evaluated results like equilibrium lattice constants, bulk moduli, and their pressure derivatives are in agreement with the available data. The electronic band structure calculation has revealed an indirect band-gap nature of NaCaF₃, while NaSrF₃ has direct band gap. Total and partial densities of states confirm the degree of localized electrons in different bands. The optical transitions in NaCaF₃ and NaSrF₃ compounds were identified by assigning corresponding peaks obtained from the dispersion relation for the imaginary part of the dielectric function. The thermodynamic properties were calculated using quasi-harmonic Debye model to account lattice vibrations. In addition, the influence of temperature and pressure effects was analyzed on bulk modulus, lattice constant, heat capacities and Debye temperature.     

UO2的电子结构及光学性质的第一性原理研究

采用局域自旋密度近似 (LSDA)和有效库仑相关能 (U) 方法研究了UO₂的晶格参数、能带结构和光学常数. 计算得到的UO₂晶体的晶格常数为5.40 ?,带隙宽度为1.82 eV,正确预测了UO₂的反铁磁性半导体基态性质. 能带结构和介电函数的分析结果表明,铀的6d电子在晶体场中发生劈裂形成两个能级,与实验结果较为符合.     

Electronic and optical properties under pressure effect of alkali metal oxides

We report results of first-principles calculations for the electronic and optical properties under pressure effect of Li₂O, Na₂O, Ki₂O and Rb₂O compounds in the cubic antifluorite structure, using a full relativistic version of the full-potential augmented plane-wave plus local orbitals (FP-APW+lo) method based on density functional theory, within the local density approximation (LDA) and the generalized gradient approximation (GGA). Moreover, the alternative form of GGA proposed by Engel and Vosko (GGA-EV) is also used for band structure calculations. The calculated equilibrium lattices and bulk moduli are in good agreement with the available data. Band structure, density of states, and pressure coefficients of the fundamental energy gap are given. The critical point structure of the frequency dependent complex dielectric function is also calculated and analyzed to identify the optical transitions. The pressure dependence of the static optical dielectric constant is also investigated.     

First principles calculations of structural,electronic and optical properties of various phases of CaS

First principles calculations have been performed within the framework of density functional theory to investigate the structural, electronic and optical properties of all four possible B1, B2, B3 and B4 phases of CaS. Apart from the standard local density approximation (LDA) and GGA (PBE), a more accurate nonempirical density functional generalized gradient approximation (GGA), as proposed by Wu and Cohen [Phys. Rev. B 73, 235116 (2006)] for the exchange-correlation energy, E_XC, has been attempted in these calculations. Calculated electronic structure and the density of states are analyzed in terms of the contribution of Ca d states and S s and p states in determining the nature of the fundamental band gap in various phases. Reflectivity, R (ω), the real and imaginary part of the dielectric functions, ε(ω), have been calculated for all the phases and the results have been discussed and compared with the existing experimental data.