基于室温溶液悬浮法共价有机骨架的制备及其对茶叶中拟除虫菊酯固相微萃取的应用

拟除虫菊酯(PYs)类农药被广泛用于茶园病虫害的防治.随着国内外对进出口茶叶中农药残留限量的要求日益严格,我国迫切地需要开发能应用于检测茶叶中痕量PYs的方法.研究通过简单、温和的溶液悬浮法(SSA),在室温下制备了共价有机骨架(COF)材料TpBD,该材料具有优异的热/化学稳定性、较高的孔隙度和比表面积.通过简单物理...     

H-point standard addition method for simultaneous determination of Fe(II), Co(II) and Cu(II) in micellar media with simultaneous addition of three analytes

H-point standard addition method, HPSAM, with simultaneous addition of three analytes is proposed for the resolution of ternary mixtures. It is a modification of the previously described H-point standard addition method that permits the resolution of three species from a unique calibration set by making the simultaneous addition of the three analytes. The method calculates the analyte concentration from spectral data at two wavelengths where the two species selected as interferents present the same absorbance relationship. These wavelength pairs are easily found, and can be selected to give the most precise results. Diethyldithiocarbomate (DDC) in a cationic micellar solution of cetyltrimethylammonium bromide (CTAB) was used for determination of Fe(II), Co(II) and Cu(II) at pH 5.50. The results showed that simultaneous determination of Fe(II), Co(II) and Cu(II) could be preformed in the range of 0.0–6.0, 0.0–8.0 and 0.0–12.0 μg ml⁻¹, respectively. The proposed method was successfully applied to the simultaneous determination of Fe(II), Co(II) and Cu(II) in several synthetic mixtures containing different concentration of Fe(II), Co(II) and Cu(II).     

Direct Quantitation of Phytocannabinoids by One-Dimensional 1H qNMR and Two-Dimensional 1H-1H COSY qNMR in Complex Natural Mixtures

The widespread use of phytocannabinoids or cannabis extracts as ingredients in numerous types of products, in combination with the legal restrictions on THC content, has created a need for the development of new, rapid, and universal analytical methods for their quantitation that ideally could be applied without separation and standards. Based on previously described qNMR studies, we developed an expanded ¹H qNMR method and a novel 2D-COSY qNMR method for the rapid quantitation of ten major phytocannabinoids in cannabis plant extracts and cannabis-based products. The ¹H qNMR method was successfully developed for the quantitation of cannabidiol (CBD), cannabidiolic acid (CBDA), cannabinol (CBN), cannabichromene (CBC), cannabichromenic acid (CBCA), cannabigerol (CBG), cannabigerolic acid (CBGA), Δ9-tetrahydrocannabinol (Δ9-THC), Δ9-tetrahydrocannabinolic acid (Δ9-THCA), Δ8-tetrahydrocannabinol (Δ8-THC), cannabielsoin (CBE), and cannabidivarin (CBDV). Moreover, cannabidivarinic acid (CBDVA) and Δ9-tetrahydrocannabivarinic acid (Δ9-THCVA) can be distinguished from CBDA and Δ9-THCA respectively, while cannabigerovarin (CBGV) and Δ8-tetrahydrocannabivarin (Δ8-THCV) present the same ¹H-spectra as CBG and Δ8-THC, respectively. The COSY qNMR method was applied for the quantitation of CBD, CBDA, CBN, CBG/CBGA, and THC/THCA. The two methods were applied for the analysis of hemp plants; cannabis extracts; edible cannabis medium-chain triglycerides (MCT); and hemp seed oils and cosmetic products with cannabinoids. The ¹H-NMR method does not require the use of reference compounds, and it requires only a short time for analysis. However, complex extracts in ¹H-NMR may have a lot of signals, and quantitation with this method is often hampered by peak overlap, with 2D NMR providing a solution to this obstacle. The most important advantage of the COSY NMR quantitation method was the determination of the legality of cannabis plants, extracts, and edible oils based on their THC/THCA content, particularly in the cases of some samples for which the determination of THC/THCA content by ¹H qNMR was not feasible.     

New Investigation of Potential Acting on an Electron in a Molecule to Draw Molecular Faces

A new approach to calculate the potential acting on an electron in a molecule(PAEM) has been established for drawing the molecular face(MF) of a macromolecule, according to the classic point charge model and the atom-bond electronegativity equalization method(ABEEMσπ) for one electron in a molecule. We introduced a dynamic charge distribution from the view of a local electron movement in a molecule based on the new approach, and as further direct evidence, we calculated some physical quantities using the original ab initio method and the new method to verify the accuracy of the method, such as the boundary distance(BD), molecular face surface area(MFSA) and molecular reactivities indicated by the MFs for a variety of organic molecules. All the results by the new method are in agreement with the results by ab initio method.     

Simultaneous Determination of Nickel(II) and Cobalt(II) by Second-Derivative Spectrophotometry

4-(2-Pyridylazo) resorcinol, PAR, is shown to be useful for simultaneous determination of cobalt(II) and nickel(II) using second-derivative spectrophotometric method with controlled experimental parameters. This method allows the determination of 0.20-1.25 ppm of nickel(II) and 0.25-1.50 ppm of cobalt(II) in mixtures with good precision and accuracy. This method has advantages of simplicity, speed and requires no prior separations.     

金属并联电解制备LiCo_xNi_(1-x)O_2正极材料

应用钴、镍金属并联电解法制备锂离子电池正极材料.电解反应时,调节流过钴、镍电极上的电流比值及控制合适的电流密度,可生成均匀的CoxNi1-x(OH)2前驱体.研究表明,该法简单且无污染.合成的LiCo0.3Ni0.7O2正极材料充放电的容量较高,循环稳定性也较好,其初始放电容量为163mAh/g,经过50次充放电循环后放电容量仍可保持140mAh/g.     

气相色谱-质谱法测定地下水中多氯萘

建立了地下水中1-氯萘、2-氯萘、1,4-二氯萘、1,2,3,4-四氯萘、1,3,5,7-四氯萘、1,2,3,5,7-五氯萘、1,2,3,5,6,7-六氯萘、1,2,3,4,5,6,7-七氯萘和八氯萘9种多氯萘(PCNs)的气相色谱-质谱(GC-MS)分析方法。对比研究了液液萃取(LLE)和固相萃取(SPE)萃取地下水中PCNs的提取效率,优选二氯甲烷-液液萃取为PCNs检测的前处理方法。在优化条件下,9种PCNs的线性范围为5~100μg/L,各组分的相关系数(r)大于0.995,方法检出限(S/N=3)为4.21~7.41 ng/L,地下水的平均加标回收率为70.7%~112%,相对标准偏差(RSD,n=5)均小于9.9%。该方法已用于地下水样中多氯萘的检测。     

液相色谱-串联质谱法测定百日咳和百白破疫苗中百日咳杆菌气管细胞毒素

百日咳杆菌气管细胞毒素（TCT）是一种引起百日咳及百日咳相关疫苗不良反应的毒性糖肽。尽管各国药典均规定了百日咳疫苗产品中TCT的含量限度，但均没有推荐TCT的含量测定方法。该研究发展了一种液相色谱-串联质谱法用于TCT的含量测定。实验优化了包括色谱柱类型和流动相组成在内的TCT色谱条件。虽然TCT在反相色谱模式和亲水作用色谱（HILIC）模式下均具有较好的保留，但HILIC模式与蛋白质沉淀的前处理方法兼容性更好，因此采用HILIC模式分离TCT。优化所得的方法具有较宽的线性范围（5.76~369 ng/L），良好的重复性（峰面积的相对标准偏差不大于3.9%），各种基质中均有较好的回收率（96.4%~102.5%），且定量限是药典要求的TCT最高限量的1/1279。将本方法用于共纯化百日咳疫苗、组分百日咳疫苗、共纯化无细胞百白破疫苗和组分无细胞百白破疫苗中TCT的检测，所有产品均未检出TCT，表明被检样品具有较好的工艺条件可避免TCT在产品中的残留。     

Determination of Sulfite in Botanical Medicine Using Headspace Thin-Film Microextraction and Surface Enhanced Raman Spectrometry

A facile method using headspace thin-film microextraction (HS-TFME) coupled with surface enhanced Raman spectrometry (SERS) has been developed for the determination of sulfite in traditional Chinese herbal medicine. The extraction substrate was synthesized by depositing urchin-like ZnO micron particles on glass sheets using chemical liquid phase deposition. Under the optimal conditions, the intensity of the SERS signal at 630–640?cm^?1 provided a good linear relationship with the concentration of sulfite from 25 to 400?mg/kg, and the linear correlation coefficient (R) was 0.996 with a detection limit of 6?mg/kg. The method was employed for the determination of sulfite in herbal medicines, and the results were confirmed by a traditional distillation-titration method. Therefore, this developed HS-TFME-SERS method may play an important role in the rapid, simple, and selective determination of sulfite residues in Chinese herbal medicine and become a potentially universal method for this analyte in various solid samples.     

Detection of banned meat and bone meal in feedstuffs by near-infrared microscopic analysis of the dense sediment fraction

In this paper we present an alternative method for detection of meat and bone meal (MBM) in feedstuffs by near-infrared microscopic (NIRM) analysis of the particles in the sediment fraction (dense fraction (d >1.62) from dichloroethylene) of compound feeds. To apply this method the particles of the sediment fraction are spread on a sample holder and presented to the NIR microscope. By using the pointer of the microscope the infrared beam is focussed on each particle and the NIR spectrum (1112–2500 nm) is collected. This method can be used to detect the presence of MBM at concentrations as low as 0.05% mass fraction. When results from the NIRM method were compared with the classical microscopic method, a coefficient of determination (R²) of 0.87 was obtained. The results of this study demonstrated that this method could be proposed as a complementary tool for the detection of banned MBM in feedstuffs by reinforcement of the monitoring of feeds.     

Assessment of the orbital‐optimized coupled‐electron pair theory for thermochemistry and kinetics: Improving on CCSD and CEPA(1)

An assessment of the orbital‐optimized coupled‐electron pair theory [or simply “optimized CEPA(0),” OCEPA(0)] [Bozkaya and Sherrill, J. Chem. Phys. 2013, 139, 054104] for thermochemistry and kinetics is presented. The OCEPA(0) method is applied to closed‐ and open‐shell reaction energies, barrier heights, and radical stabilization energies (RSEs). The performance of OCEPA(0) is compared with those of the MP2, CEPA(0), OCEPA(0), CEPA(1), coupled‐cluster singles and doubles (CCSD), and CCSD(T) methods [at complete basis set limits employing cc‐pVTZ and cc‐pVQZ basis sets]. For the most of the test sets, the OCEPA(0) method performs better than CEPA(0), CEPA(1), and CCSD, and provides accurate results. Especially, for open‐shell reaction energies and barrier heights, the OCEPA(0)–CEPA(1) and OCEPA(0)–CCSD differences become obvious. Similarly, for barrier heights and RSEs, the OCEPA(0) method improves on CEPA(0) by 1.6 and 2.3 kcal mol^?1. Our results demonstrate that the CEPA(0) method dramatically fails when the reference wave function suffers from the spin‐contamination problem. Conversely, the OCEPA(0) method can annihilate spin‐contamination in the unrestricted‐Hartree–Fock initial guess orbitals and can yield stable solutions. For overall evaluation, we conclude that the OCEPA(0) method is quite helpful not only for problematic open‐shell systems and transition‐states but also for closed‐shell molecules. Hence, one may prefer OCEPA(0) over CEPA(0), CEPA(1), and CCSD as an method, where N is the number of basis functions, for thermochemistry and kinetics. As discussed previously, the cost of the OCEPA(0) method is as much as of CCSD and CEPA(1) for energy computations. However, for analytic gradient computations, the OCEPA(0) method is two times less expensive than CCSD and CEPA(1). Further, the stationary properties of the OCEPA(0) method making it promising for excited state properties via linear response theory. © 2014 Wiley Periodicals, Inc.     

微囊藻毒素分子印迹搅拌棒涂层的研制及其吸附性能

以微囊藻毒素(MC)-LR为模板,甲基丙烯酸(MAA)为功能单体,通过可逆加成-断裂链转移(RAFT)自由基聚合技术,在凹凸棒土(ATP)表面制备了磁性分子印迹聚合物,并通过溶胶-凝胶法将分子印迹聚合物作为涂层介质制作搅拌棒。同时通过红外吸收光谱和扫描电镜等对印迹聚合物进行了结构和形貌的表征,并用液相色谱研究了搅拌棒涂层对水体中微囊藻毒素的吸附性能。结果表明,在最佳萃取条件下,分子印迹搅拌棒涂层对MC-LR具有较高的选择性能,在0.010~5.0 mg/L范围内线性关系良好(r²>0.997),检出限(S/N=3)可低至0.27 μg/L。MC-LR加标水平为20.0~80.0 μg/L的回收率范围为83.33%~100.07%,相对标准偏差(RSD)为1.40%~9.17%。该方法快速、灵敏、选择性高,可用于环境水体中微囊藻毒素的分析检测。     

气相色谱法检测工业用乙二醇纯度及杂质

以Rtx-624色谱柱（30 m×0.32 mm×1.8 μm）为分析柱进行分析，采用校正面积归一化法，建立了检测工业用乙二醇纯度及其中有机杂质的气相色谱分析法。该法可检测传统乙烯法制得的乙二醇中固有杂质二乙二醇、三乙二醇和1，3-二氧杂烷-2-甲醇，同时也适用于检测草酸酯加氢法制得的乙二醇中的新杂质（1，2-丁二醇、1，4-丁二醇、1，2-己二醇、碳酸乙烯酯等）。结果表明，该法具有良好的重复性和较高的检测灵敏度，检出限最低可达0.0002%（质量分数），回收率在91.2%~105.4%之间。该法在乙二醇生产控制、产品检测、市场贸易等过程中具有良好的应用前景。     

Applying green analytical chemistry for development and validation of RP-HPLC stability indicating assay method for estimation of fenoverine in bulk and dosage form using quality by design approach

A green and robust reverse-phase liquid chromatographic method has been developed for the determination of fenoverine (FEN), by applying combined principles of green analytical chemistry and quality by design approaches on a Spherisorb C18 column (150?×?4.6?mm, 3?µm) with UV detection at 262?nm. A two level fractional factorial design (2^^7-3) Res IV was used for screening of influential chromatographic factors. The critical method parameters actively affecting critical quality attributes (CQAs) were identified and further optimized using Box–Behnken design. The predicted optimum assay conditions comprised of methanol and ammonium acetate buffer 20?mM, in an extent of 81:19% v/v individually having a flow rate of 1.0?mL/min with a column oven temperature of 33°C. The drug was stressed in hydrolytic, oxidative, reductive, thermal, and photolytic conditions. The developed method was validated successfully. The detector response was linear in the concentration of 0.5–160?µg/mL with a limit of detection (LOD) and limit of quantitation (LOQ) as 0.1 and 0.3?µg/mL, respectively. The % recovery was found to be 99.7%. The analytical method volume intensity value for developed method was 45?mL and the environment assessment tool (EAT) score was 41.07. The method is simple, environmentally benign, rapid, and robust for the determination of FEN in bulk and in its dosage form.     

毛细管电泳结合压力辅助电动进样测定水样中4种酚类雌激素

在毛细管电泳的胶束电动色谱（MEKC）模式下,采用压力辅助电动进样（PAEKI）的进样方式在线富集4种酚类雌激素（PEs）。对影响PAEKI的进样电压、进样时间等进行考察,并与传统的压力进样比较。结果表明,在最优的PAEKI条件下（-9 kV,0.3 psi（约2.1 kPa）,0.4 min）,4种PEs在7 min内基线分离,线性关系良好,相关系数（r）大于0.9936,己烷雌酚和双烯雌酚的线性范围为0.05~5 mg/L、双酚A和己烯雌酚的线性范围为0.1~10 mg/L;检出限（S/N=3）为0.0071~0.017 mg/L,富集倍数为11~15。使用该MEKC-PAEKI法对自来水和湖水水样进行测定,得到定量限（S/N=10）分别为0.029~0.064 mg/L和0.033~0.079 mg/L;加标回收率为75.6%~110.1%,相对标准偏差（n=5）为4.6%~11.8%。PAEKI不需要使用其他试剂,只需对电泳仪的参数进行适当调整即可实现对分析物的在线富集,简单、快速、自动化程度高。     

Two-rate method for simultaneous kinetic determination based on detecting the reagent in successive reactions

A simultaneous kinetic method based on the measurement of two rates at two points during the course of the successive reactions is proposed. The successive kinetics of the reaction of tris(1,10-phenanthroline)iron(III) with epinephrine (EP) and norepinephrine (NE) (10⁻⁵ to 10⁻⁴ M) is investigated and exploited for the determination of binary mixtures of the two catecholamines using the two-rate method. The method is compared with classical and extension proportional equation methods and a smaller error is obtained for the two-rate method. The reason why the two-rate method based on successive reactions works well is explained by studies on a series of simulated kinetic curves.     

Application of selected ion monitoring to the analysis of triacylglycerols in olive oil by high temperature-gas chromatography/mass spectrometry

The analysis of the triacylglycerol (TAG) composition of oils is a very challenging task, since the TAGs have very similar physico-chemical properties. In this work, a high temperature-gas chromatographic method coupled to electron ionization-mass spectrometry (HT-GC/EI-MS), in the Selected Ion Monitoring (SIM) mode, method was developed for the analysis of TAGs in the olive oil; this is a method suitable for routine analysis. This method was developed using commercially available standard TAGs. The TAGs studied were separated according to their equivalent carbon number and degree of unsaturation. The peak assignment was carried out by locating the characteristic fragment ions having the same retention time on the SIM profile such as [RCO+74]⁺ and [RCO+128]⁺ ions, due to the fatty acyl residues on sn-1, sn-2 and sn-3 positions of the TAG molecule and the [M−OCOR]⁺ ions corresponding to the acyl ions. The developed method was very useful to eliminate the interferences that appeared in the mass spectrum since electron ionization can prevent satisfactory interpretation of spectra.     

Silica gel surface modified with sulfanilamide for selective solid-phase extraction of Cu(II), Zn(II) and Ni(II)

A new chelating matrix has been prepared by immobilising sulfanilamide (SA) on silica gel (SG) surface modified with 3-chloropropyltrimethoxysilane as a sorbent for the solid-phase extraction (SPE) Cu(II), Zn(II) and Ni(II). The determination of metal ions in aqueous solutions was carried out by inductively coupled plasma optical emission spectrometry (ICP-OES). Experimental conditions for effective sorption of trace levels of Cu(II), Zn(II) and Ni(II) were optimised with respect to different experimental parameters using the batch and column procedures. The presence of common coexisting ions does not affect the sorption capacities. The maximum sorption capacity of the sorbent at optimum conditions was found to be 34.91, 19.07 and 23.62 mg g^?1 for Cu(II), Zn(II) and Ni(II), respectively. The detection limit of the method defined by IUPAC was found to be 1.60, 0.50 and 0.61 µg L^?1 for Cu(II), Zn(II) and Ni(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 4.0% (n = 8). The method was applied to the recovery of Cu(II), Zn(II) and Ni(II) from the certified reference material (GBW 08301, river sediment) and to the simultaneous determination of these cations in different water samples with satisfactory results.     

Spectrophotometric Determination of Trace Chromium(VI) in Mass Chromium(III)

There is little conclusive evidence of the toxic effects of Cr(III) so far, but Cr(VI) has carcinogenic activity, so the analysis of the chromine ions is very important in environmental research and the quality control of industry products. Usually Cr(III) and Cr(VI) interfere with each other in the species analysis, the measurement of Cr(VI) of numerous previous papers is related to the Cr(VI) samples, which contain a little Cr(III). When the amount of trivalent chromine exceeds ten …