Fluorinated phosphorus compounds: Part 6. The synthesis of bis(fluoroalkyl) phosphites and bis(fluoroalkyl) phosphorohalidates

Reaction of phosphorus trichloride with tert-butanol and fluoroalcohols gave bis(fluoroalkyl) phosphites (R_FO)₂P(O)H in 42-89% yield, where R_F=HCF₂CH₂, H(CF₂)₂CH₂, H(CF₂)₄CH₂, CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, (CF₃)₂CH, (FCH₂)₂CH, CF₃(CH₃)₂C, (CF₃)₂CH₃C, CF₃CH₂CH₂, C₄F₉CH₂CH₂ and C₆F₁₃CH₂CH₂. Treatment of these with chlorine in dichloromethane gave the bis(fluoroalkyl) phosphorochloridates (R_FO)₂P(O)Cl in 49-96% yield. The chloridate (CF₃CH₂O)₂P(O)Cl was isolated in much lower yield from the interaction of thionyl chloride with bis(trifluoroethyl) phosphite. Heating the latter in dichloromethane with potassium fluoride and a catalytic amount of trifluoroacetic acid gave the corresponding fluoridate (CF₃CH₂O)₂P(O)F in 84% yield. Treatment of bis(trifluoroethyl) phosphite with bromine or iodine gave the bromidate (CF₃CH₂O)₂P(O)Br and iodidate (CF₃CH₂O)₂P(O)I in 51 and 46% yield, respectively. The iodidate is the first dialkyl phosphoroiodidate to have been isolated and characterised properly—its discovery lags behind the first isolation of a dialkyl phosphorochloridate by over 130 years. The fluoroalkyl phosphoryl compounds are generally more stable than known unfluorinated counterparts.     

HPLC separation of catecholamines after derivatization with 9-fluorenylmethyl chloroformate

Summary Optimum conditions for the separation of 9-fluorenylmethyl chloroformate derivatized catecholamines by HPLC are described; three catecholamines (noradrenaline, adrenaline and dopamine) and an internal standard (epinine) were separated in less than 20 minutes under isocratic conditions. This method is 17 to 350 times more sensitive than electrochemical detection, depending on the test compounds. It has been applied to the analysis of catecholamines in urine. The sample was extracted by a metal-loaded silica prior to separation.     

Metallacrown ethers with a symmetric bis(phosphite) ligand derived from 1,2-bis-(2-hydroxyethoxy)benzene: Synthesis, characterization and hydroformylation of styrene

To better understand the effects of ligand configuration on hydroformylation reactions carried out in the presence of LiBPh₄·3dme (dme = 1,2-dimethoxyethane), a conformationally restrained bis(phosphite) ligand derived from 1,2-bis-(2-hydroxyethoxy)benzene, {[(2,2′-O₂C₁₂H₈)P(C₂H₄O₂)]₂C₆H₄}, 1, has been prepared and its Rh(I) metallacrown ether complex has been evaluated as a catalyst for the hydroformylation of styrene. Both the activity and regioselectivity of the catalyst are sensitive to the amount of the LiBPh₄·3dme added with the activity decreasing by 16% and the regioselectivity for the iso increasing by 9% at a 8:1 LiBPh₄:Rh ratio.Model complexes for the octahedral, cis-Mo(CO)₄(1), 2, and square planar, cis-PtCl₂(1), 3, and cis-PdCl₂(1), 4, complexes in the catalytic cycle has been have been studied using multinuclear NMR spectroscopy and X-ray crystallography. Although the X-ray crystal structure of 2 suggests that the metallacrown ether ring could adopt a configuration capable of binding alkali metal cations, this does not appear to occur in a dichloromethane-d₂ solution of 2 because no shift in the ³¹P NMR resonance 2 is observed upon the addition of an excess of LiBPh₄·3dme. The ³¹P{¹H} NMR spectra of chloroform-d solutions of 2 (in the presence of a catalytic amount of HgCl₂) and of 4 and the X-ray crystal structures of the complexes indicate that the bis(phosphite) ligands are cis coordinated in these complexes in both the solution and in the solid state. This is particularly surprising for 4 because related PdCl₂{Ph₂P(CH₂CH₂O)_nCH₂CH₂PPh₂} (n = 3-5) complexes exhibit both cis-trans and monomer-oligomer equilibria in solution.     

Electromembrane extraction of polar basic drugs from plasma with pure bis(2-ethylhexyl) phosphite as supported liquid membrane

Electromembrane extraction (EME) of polar basic drugs from human plasma was investigated for the first time using pure bis(2-ethylhexyl) phosphite (DEHPi) as the supported liquid membrane (SLM). The polar basic drugs metaraminol, benzamidine, sotalol, phenylpropanolamine, ephedrine, and trimethoprim were selected as model analytes, and were extracted from 300 μL of human plasma, through 10 μL of DEHPi as SLM, and into 100 μL of 10 mM formic acid as acceptor solution. The extraction potential across the SLM was 100 V, and extractions were performed for 20 min. After EME, the acceptor solutions were analyzed by high-performance liquid chromatography-ultraviolet detection (HPLC-UV). In contrast to other SLMs reported for polar basic drugs in the literature, the SLM of DEHPi was highly stable in contact with plasma, and the system-current across the SLM was easily kept below 50 μA. Thus, electrolysis in the sample and acceptor solution was kept at an acceptable level with no detrimental consequences. For the polar model analytes, representing a log P range from −0.40 to 1.32, recoveries in the range 25–91% were obtained from human plasma. Strong hydrogen bonding and dipole interactions were probably responsible for efficient transfer of the model analytes into the SLM, and this is the first report on efficient EME of highly polar analytes without using any ionic carrier in the SLM.     

Determination of fatty acids by high-performance liquid chromatography and fluorescence detection using precolumn derivatization with 9-fluorenylmethyl chloroformate

A new high-performance liquid chromatographic method is described for the determination of fatty acids in seed oils. The method was based on precolumn derivatization with 9-fluorenylmethyl chloroformate as a labeling agent and fluorescence detection. Fatty acids were extracted from the samples and subjected to derivatization with the reagent at 60°C for 10?min. The chromatographic separation of 14 fatty acids (C10–C22) was achieved on a combined loading compression octadecyl sulfate (CLC-ODS) column with a run time of 30?min. Three-step gradient elution of a mobile phase consisted of acetonitrile and water was used, and the signal was monitored at excitation and emission wavelengths of 265 and 315?nm, respectively. The method indicated favorable sensitivity and reproducibility for fatty acids’ derivatives. The detection limits, at a signal-to-noise ratio of 3, were 0.01–0.05?µg/ml and relative standard deviations (RSDs) were less than 0.27%. Excellent linear responses were observed with coefficients of 0.9995. This method was applied to quantify fatty acids in white, brown, and black sesame seeds’ oil.     

An efficient method for the synthesis of dialkyl chlorophosphates from trialkyl phosphites using bis（trichloromethyl） carbonate

A mild and simple method for the synthesis of dialkyl chlorophosphates is described, bis（trichloromethyl） carbonate （BTC） is used as the effective reagent for the conversion of dialkyl phosphites to their corresponding dialkyl chlorophosphates under mild conditions.     

An effective kinetic resolution of racemic α-arylpropanoic acids, α-arylbutanoic acids, and β-substituted-α-arylpropanoic acids with bis(9-phenanthryl)methanol as a new achiral nucleophile in the asymmetric esterification using carboxylic anhydrides and the acyl-transfer catalyst

A general method for the kinetic resolution of racemic α-arylalkanoic acids with achiral alcohols is described. It was determined that bis(9-phenanthryl)methanol is a suitable nucleophile which reacts with the intermediary mixed anhydrides generated from aromatic anhydrides with α-arylpropanoic acids or β-substituted-α-arylpropanoic acids in the presence of (+)-benzotetramisole to produce the corresponding optically active esters with high ee’s under very mild conditions.     

Synthesis of substituted bis(heteroaryl)maleimides

Substituted bis(fur-2-yl), bis(fur-3-yl) and bis(thien-2-yl) maleimides with potential antidiabetic properties are described. Their synthesis involves, as a key step, a Suzuki cross-coupling between various boron derivatives and the diiodomaleimides. Therefore, a wide range of substituted symmetric and non-symmetric maleimide derivatives can be prepared.     

Synthesis of palladium complexes with bis(diphenylphosphinomethyl)amino ligands: A catalyst for the Heck reaction of aryl halide with methyl acrylate

A series of ligands, (Ph₂PCH₂)₂NR (R = -CH₃) (1), -C(CH₃)₃, (2) -m-C₆H₄SO₃Na (3), and their Pd(II) complexes have been synthesized under nitrogen atmosphere using Schlenk method. All compounds were characterized using elemental analysis and spectroscopic techniques (AAS, NMR (¹H, ³¹P)). Based on the analysis the complexes have been proposed as in square planar geometry. The Pd(II) complexes were applied to the Heck reaction of aryl halide (Br, Cl) with methyl acrylate. The results have exhibited that complexes [PdCl₂((Ph₂PCH₂)₂NCH₃)] (4) and [PdCl₂((Ph₂PCH₂)₂NC(CH₃)₃)] (5) have shown higher turnover numbers (TON) than complex [PdCl₂(Ph₂PCH₂)₂N-m-C₆H₄SO₃Na] (6).     

Synthesis of bis(indole)-1,2,4-triazinones

A facile method for the synthesis of para- and meta-substituted bis(indole)-1,2,4-triazinones is presented. Our approach to access these triazinones involves a cyclocondensation reaction between amidrazone and ketoester functionalities. The structures of these interesting compounds were established unambiguously by X-ray crystallography.     

Synthesis and characterization of sodium bis(trimethylstannyl) amide and bis(trimethylsilyl) bis(trimethylstannyl) -phospha-tetrazene

Sodium bis(trimethylstannyl)amide NaN(SnMe₃)₂, isolated by the reaction of trimethylstannyldiethylamine with sodium amide, reacts with tris(trimethylsilyl)hydrazino—dichloro-phosphine to form bis(trimethylsilyl)bis(trimethylstannyl)-2-phospha-2-tetrazene, (Me₃Si)₂N-N=P-N(SnMe₃)₂. Both the molecules have been isolated and characterized.     

Synthesis,characterization, and properties of novel bis(aryl)carbazole-containing N-coumarin derivatives

A series of novel N-coumarin derivatives containing oligothiophene-substituted N-coumarins as the core and bis(aryl)carbazoles as the substituent were synthesized and characterized. Their optical, electrochemical, and thermal properties were investigated. The electroluminescence (EL) properties of the selected materials were also studied. Solution-processed OLEDs with green and yellow light emission, turn-on voltages of 2.7–2.9 V, and maximum luminance efficiencies of up to 3.94 cd A⁻¹ at 17.6 mA cm⁻² (maximum power efficiency of 1.62 lm W⁻¹) were prepared.     

Synthesis and Crystal Structures of Antimony(III) Complexes With a Bis(amino)silane Ligand

Bis(amino)silane bearing bulky substituents on nitrogen, LH₂ [L = Me₂Si(NDipp)₂, Dipp = 2, 6‐diisopropylphenyl] was reacted with nBuLi (ratio 1:1 and 1:2) in toluene. The Me₂Si(LiNDipp)₂ was treated with SbCl₃ in a 1:1 ratio to yield the four‐membered SiN₂Sb ring compound of composition [η²(N,N)‐Me₂Si(NDipp)₂SbCl] ( 1 ). The mono lithiated bis(amino)silane was used to synthesize the monodentate heterotetraatomic complex [(η¹‐Me₂SiNDipp)NHDippSbCl₂] ( 2 ) by the reaction with SbCl₃. The complexes were characterized by ¹H and ¹³C NMR, elemental analysis, IR, and single‐crystal X‐ray structural analysis.     

Synthesis and properties of N,N′-dialkylimidazolium bis(nonafluorobutane-1-sulfonyl)imides: a new subfamily of ionic liquids

A series of N,N′-dialkylimidazolium bis(nonafluorobutane-1-sulfonyl)imides was synthesized in high yields by quaternization of imidazole derivatives with various readily available alkylating reagents, followed by anion exchange with highly stable and non-hygroscopic potassium bis(nonafluorobutane-1-sulfonyl)imide. The latter was obtained by an improved method starting from ammonium chloride and nonafluorobutane-1-sulfonyl fluoride. The quaternary imidazolium salts thus obtained constitute a new subfamily of thermally stable and remarkably hydrophobic ionic liquids with melting points in the range 0-40 °C and solubilities in water and organic solvents (aromatic hydrocarbons, dialkyl ethers) in the range of 0.5-1.5 wt%. The ionic liquids can be easily purified from ionic byproducts (e.g., halogenide salts) by aqueous extraction followed by thorough drying in a high vacuum without loss of yield. Due to the above features, these new ionic fluids may be considered as promising recyclable media in repeated catalytic processes.     

Fluorinated phosphorus compounds: Part 10. Bis(fluoroalkyl) S-alkyl phosphorothiolates and tris(fluoroalkyl) phosphorothionates

Treatment of bis(fluoroalkyl) phosphites (R_FCH₂O)₂P(O)H, where R_F was CF₃ or C₂F₅ with sulfur in pyridine at 80 °C gave salts of structure [(R_FCH₂O)₂P(O)SH]NC₅H₅ in 90 and 88% yield, respectively. The salts reacted with alkyl iodides in acetonitrile at 50 °C to furnish bis(fluoroalkyl) S-alkyl phosphorothiolates (R_FCH₂O)₂P(O)SR, where R was Me, Et, n- and i-Pr (when R_F = CF₃) and Me (when R_F = C₂F₅). Yields ranged from 21 to 57%. Bis(trifluoroethyl) S-methyl phosphorothiolate (CF₃CH₂O)₂P(O)SMe underwent fluorination by silver(I) fluoride in acetonitrile at room temperature to yield the phosphorofluoridate (CF₃CH₂O)₂P(O)F in 75% yield. Tris(fluoroalkyl) phosphorothionates (R_FCH₂O)₃P = S, where R_F was CF₃, C₂F₅ and C₃F₇, were prepared in 30-34% yield by heating the tris(fluoroalkyl) phosphites (R_FCH₂O)₃P and sulfur to 200 °C in a sealed tube for 8 h.     

双2,2’-亚甲基双(4,6-二叔丁基苯基)亚磷酸酯的合成及其抗氧化活性

以2,2’-亚甲基双(4,6-二叔丁基苯酚)和三氯化磷为原料,三乙胺为催化剂,通过二次酯化反应合成了一种内环双酚亚磷酸酯类抗氧剂——双2,2’-亚甲基双(4,6-二叔丁基苯基)亚磷酸酯(1),收率73.5%,纯度98%,其结构经1H NMR和IR确证。采用1,1-二苯基-2-苦基肼自由基比色法测定了1捕获自由基能力。结果表明,1具有较强的自由基捕获能力,是一种良好的分子内复合链终止型抗氧剂。     

Photocatalytic degradation of chloroform by bis (bipyridine)dichlororuthenium(III/II)

Broadband (λ > 320 nm) irradiation of chloroform solutions of either [Ru(bpy)₂Cl₂] or [Ru(bpy)₂Cl₂]Cl exposed to air led to a photostationary state, in which [Ru(bpy)₂Cl₂]⁺ predominated, and to the continuous decomposition of CHCl₃, as evidenced by the accumulation of HCl, hydroperoxides (CCl₃OOH and CHCl₂OOH), and tetra-, penta-, and hexachloroethane. The addition of Cl^? increased the rate of photodecomposition, while the replacement of Cl^? by F^? greatly decreased the rate. The observations are consistent with a photocatalytic cycle in which [Ru(bpy)₂Cl₂]⁺ is photochemically reduced to [Ru(bpy)₂Cl₂], which is thermally reoxidized by CCl₃OO or CCl₃OOH. In the absence of air a much slower photodecomposition reaction takes place leading to continuously increasing concentrations of chloroethanes. The data are consistent with a catalytic cycle in which [Ru(bpy)₂Cl₂]⁺ is photoreduced, as in aerated solutions, while [Ru(bpy)₂Cl₂] is photooxidized with chloroform as the substrate.     

F-alkylation of bis(allyl) polyoxyethylene ethers

Bis(3-F-alkylallyl) polyoxyethylene ethers were obtained via radical addition of F-alkyl iodides on bis(allyl) ethers CH₂CH(CH₂OCH₂)_nCHCH₂ followed by 1,8-diazabicyclo[5.4.0]undec-7-ne (DBU) dehydrohalogenation.     

Lewis acid-catalyzed reactions of N′-(2-alkynylbenzylidene)hydrazides with diethyl phosphite

Lewis acid catalyst-tuned reactions of N′-(2-alkynylbenzylidene)hydrazides with diethyl phosphite are described. Isoquinolin-1-ylphosphonate is generated when copper triflate is utilized as catalyst, while 2-amino-1,2-dihydroisoquinolin-1-ylphosphonate is obtained in the presence of palladium acetate.