A novel and highly selective conversion of alcohols, thiols, and silyl ethers to azides using the triphenylphosphine/2,3-dichloro-5,6-dicyanobenzoquinone(DDQ)/n-Bu4NN3 system

Alcohols, thiols, and silyl ethers are converted into alkyl azides in good to excellent yields by treatment with PPh₃/DDQ/n-Bu₄NN₃ in CH₂Cl₂ at room temperature. The method is highly selective for 1° alcohols in the presence of 2° and 3° ones, and also thiols and silyl ethers.     

BiOClO4-mediated deprotection of silyl ethers

TES- and TBS-protected alcohols undergo deprotection in good to excellent yield upon heating with 1 equiv of BiOClO₄-xH₂O in CH₂Cl₂. TBDPS- and TIPS-protected 2° alcohols are more resistant to deprotection. The use of this method in selective desilylation is, however, limited to the deprotection of alkyl silyl ethers in the presence of TBDPS-protected phenols.     

Indium-catalyzed coupling reaction between silyl enolates and alkyl chlorides or alkyl ethers

The coupling reactions of alkyl chlorides with silyl enolates catalyzed by InBr₃, and the coupling reactions of alkyl ethers with silyl enolates catalyzed by the combined Lewis acid of InBr₃/Me₃SiBr are described. In both reaction systems, various types of silyl enolates were used to give corresponding α-alkylated esters, ketones, carboxylic acids, amides, thioesters, and aldehydes.     

A practical ortho-rearrangement of silyl group of ortho-bromophenyl silyl ethers using magnesium(0)

A practical synthesis of ortho-silyl-substituted phenol from ortho-bromophenyl silyl ethers without using RLi is described. Various ortho-bromophenyl silyl ethers are treated with commercially available Mg turnings, which are easy to handle in air, and transfer of the silyl group to the ortho-position occurs in good to high yields. Selective mono-magnesiation of 2,6-dibromophenyl silyl ether is observed even in the presence of excess Mg, and ortho-bromo-6-silylphenol is obtained as the predominant product. The obtained ortho-silyl-substituted phenol is formylated with (CH₂O)_n/MgCl₂/Et₃N, and then condensation with a diamine leads to a silyl-substituted salen-type ligand in a good yield. This scheme is suitable for the large scale synthesis of silyl-substituted salen-type ligands bearing imine groups.     

An atom-efficient and powerful method for direct esterification of silyl ethers catalyzed by HClO4-SiO2

An efficient and convenient procedure for direct esterification of alkyl and aryl silyl ethers with Ac₂O and a catalyst system of perchloric acid immobilized on a silica gel (HClO₄-SiO₂) has been developed. The silyl protecting groups are directly replaced by acetyls and the protecting groups themselves are transformed into acetates as the sole byproducts, which can be readily recovered and converted back to silylchlorides, the original protecting agents, thus minimizing wastes.     

A mild, efficient, and selective deprotection of tert-butyldimethylsilyl (TBDMS) ethers using dicationic ionic liquid as a catalyst

Selective deprotection of alkyl TBDMS ether in the presence of phenolic TBDMS ether using dicationic ionic liquid [tetraEG(mim)₂][OMs]₂ as a homogeneous catalyst showed significant catalytic activity in methanol at ambient temperature to produce respective alcohol in excellent yield. The present environmentally benign catalytic system is found to be very convenient, fast, high yielding, and clean method for selective desilylation of alkyl silyl ethers even in the existence of other sensitive organic functional groups such as aldehyde, methoxy, and acetate were also achieved.     

Stereoselective synthesis of trans-α-ketohydrazones from silyl enol ethers mediated by iodobenzene diacetate

Stereoselective synthesis of a variety of trans-α-ketohydrazones from silyl enol ethers in the presence of iodobenzene diacetate [PhI(OAc)₂] as oxidant with N-aminophthalimide (PthNH₂) as the nitrogen source in CH₂Cl₂ at room temperature was accomplished in good yields (up to 75%) with exclusive trans-selectivity.     

Simple procedure for preparation of α-fluoro esters by fluorination of ester enol silyl ethers with perchloryl fluoride

Fluorination of ester enol silyl ethers in THF at room temperature using diluted perchloryl fluoride (FClO₃) in the presence of ca. 0.5 M eq. of t-BuNH₂ as an additive produced the corresponding α-fluoro esters in over 80% yields.     

Quenching of metal‐catalyzed living radical polymerization with silyl enol ethers

Various silyl enol ethers were employed as quenchers for the living radical polymerization of methyl methacrylate with the R Cl/RuCl₂(PPh₃)₃/Al(Oi–Pr)₃ initiating system. The most effective quencher was a silyl enol ether with an electron‐donating phenyl group conjugated with its double bond [CH₂C(OSiMe₃)(4‐MeOPh) ( 2a )] that afforded a halogen‐free polymer with a ketone terminal at a high end functionality [F̄_n ∼ 1]. Such silyl compounds reacted with the growing radical generated from the dormant chloride terminal and the ruthenium complex to give the ketone terminal via the release of the silyl group along with the chlorine that originated from the dormant terminal. In contrast, less conjugated silyl enol ethers such as CH₂C(OSiMe₃)Me were less effective in quenching the polymerization. The reactivity of the silyl compounds to the poly(methyl methacrylate) radical can be explained by the reactivity of their double bonds, namely, the monomer reactivity ratios of their model vinyl monomers without the silyloxyl groups. The lifetime of the living polymer terminal was also estimated by the quenching reaction mediated with 2a . © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4735–4748, 2000     

Efficient preparation of dichloromethyl alkyl ethers and their application in the formylation of aromatic compounds: Scope and limitations

Practical preparations of dichloromethyl alkyl ethers are described, based on the reaction of alkyl formates with oxalyl chloride in the presence of N-methylformanilide. The method involves a simple procedure that does not require the use of harmful reagents. Dichloromethyl propyl and dichloromethyl butyl ethers represent secure synthetic equivalents to dichloromethyl methyl ether. Formylations of both electron-deficient and electron-rich aromatics with these dichloromethyl alkyl ethers in the presence of AlCl₃, FeCl₃, or TiCl₄ have been systematically investigated. A plausible mechanism of formylation is discussed.     

The chemoselective and efficient deprotection of silyl ethers using trimethylsilyl bromide

An efficient and chemoselective cleavage of silyl ethers (primary, secondary and aromatic) by using catalytic quantities of trimethylsilyl bromide (TMSBr) in methanol is reported. A wide range of alkyl silyl ethers such as TBS, TIPS, and TBDPS can be chemoselectively cleaved in high yield in the presence of aryl silyl ethers. The deprotection of silyl esters was also achieved employing catalytic quantities of TMSBr.     

BF3-promoted cyclization reaction of imines and salicylaldehyde with silyl enol ethers: unexpected formation of dioxaspiro compounds

Unexpected spiro cyclic products were formed from the reaction of imines and salicylaldehyde with silyl enol ethers in the presence of BF₃·OEt₂. Different kinds of dioxaspiro products were afforded depending on the nature of starting materials. Furthermore, salicylaldehyde could also react directly with several silyl enol ethers, giving three products with different spiro cyclic structure under the same reaction conditions.     

Modification of olefin polymerization catalysts. I. Mechanism of the interaction between AIEt3 and silyl ethers

The interaction between AlEt₃ and silyl ethers, Ph_nSi(OMe)_4-n (n = 0–3), was followed by ¹³C- and ²⁹Si-NMR techniques in conditions close to those typical for an olefin polymerization reaction with supported Ziegler–Natta catalysts (A1Et₃:silyl ether ratios from 1 to 10, temperature range 25–75°C). A1Et₃ and silyl ethers form instantaneously at ambient temperature a donor-acceptor complex, which is stable at a 1:1 molar ratio. In the presence of excess A1Et₃ the complex decomposes via a mechanism consisting, in the case of PhSi(OMe)₃, of five consecutive steps: alternating complexation and ether reductions with the formation of alkylated silyl ethers, Ph(Et)_nSi(OMe)_3-n (n = 1,2), and dialkyl-aluminum alkoxides, (Et₂A1OMe₃)_n (n = 2,3). The rate of decomposition was enhanced by the increasing number of methoxy groups present in the silyl ether, heating, or a high A1Et₃:silyl ether ratio. The decomposition was not inhibited by the presence of 1-hexene.     

Cerium(IV) sulfate tetrahydrate: a catalytic and highly chemoselective deprotection of THP,MOM, and BOM ethers

Tetrahydropyranyl (THP), methoxymethyl (MOM), and benzyloxymethyl (BOM) phenyl/alkyl ethers were efficiently cleaved to the corresponding parent hydroxyl compounds in good yields using catalytic amounts of Ce(SO₄)₂·4H₂O by microwave-assisted or conventional heating in methanol solution. Intramolecular and competitive experiments demonstrated the chemoselective deprotection of THP ethers in the presence of triisopropylsilyl (TIPS) and tert-butyldiphenylsilyl (TBDPS) phenyl ethers.     

A Novel Chemoselective Cleavage of (tert‐Butyl)(dimethyl)silyl (TBS) Ethers Catalyzed by Ce(SO4)2⋅4 H2O

(tert‐Butyl)(dimethyl)silyl (^tBuMe₂Si; TBS) phenyl/alkyl ethers were efficiently cleaved to the corresponding parent hydroxy compounds in good yields using catalytic amounts of Ce(SO₄)₂?4 H₂O by microwave‐assisted or conventional heating in MeOH. Intramolecular and competitive experiments demonstrated the chemoselective deprotection of TBS ethers in the presence of triisopropylsilyl (ⁱPr₃Si; TIPS) and (tert‐butyl)(diphenyl)silyl (^tBuPh₂Si; TBDPS) ethers.     

Reactivities and NMR spectra of vinyl ethers

Copolymerizations of n-butyl vinyl ether (M₁) with other vinyl ethers were carried out in toluene at ?78°C with EtAlCl₂ catalyst and the monomer reactivity ratios were determined. It was found that the relative reactivity of alkyl vinyl ether log 1/r₁ is higher when the alkyl group is more electron-donating and the reactivity correlates linearly with the Taft σ^* of alkyl group in the monomer. The NMR spectra of vinyl ethers and of vinyl ether–trialkylaluminum complexes were investigated. Close correlations were found between the spectral characteristics and the relative reactivity of vinyl ether in the copolymerization. The degree of resonance contribution in alkyl vinyl ether was also discussed on the basis of NMR data.     

GaCl3 Promoted one-step α,α-diethynylation and α,α-diethenylation reactions of silyl enol ethers

In the presence of GaCl₃ and 2,6-di(tert-butyl)-4-methylpyridine, α-monosubstituted silyl enol ethers were α,α-diethynylated with a chlorosilylacetylene in one step. An analogous reaction using a silylacetylene gave α,α-diethenylated ketones.     

Ruthenium-catalyzed oxidation of silyl ethers to silyl esters

Direct oxidation of silyl ethers to silyl esters, using RuO₄ formed in situ, is reported. The reaction was optimized to minimize formation of the corresponding carboxylic acid product whose formation pathway appears to be solvent dependent. The reaction is tolerant of halides, nitriles, nitro groups, esters, epoxides, and ketones.     

Catalytic Reactions with Hydrosilane and Carbon Monoxide [New synthetic methods (30)]

The reagent hydrosilane/carbon monoxide opens up new possibilities for organic synthesis. Four cases will be discussed: 1. The reaction of olefins with hydrosilane (trialkylsilane) and carbon monoxide in the presence of Co, Ru, and Rh complexes leads to enol silyl ethers having one more carbon atom that the olefins. 2. Cyclic ethers underto carbonylative ring opening to ω-siloxyaldehydes when reacted with hydrosilane and carbon monoxide in the presence of Co₂(CO)₈ as catalysts 3. Aldehydes are catalytically converted into the next higher α-siloxyaldehydes or 1,2-bis(siloxy)alkenes depending on the reaction conditions used. 4. The reaction of alkyl acetates proceeds in various ways depending on the nature of the alkyl group; enol silyl ethers or alkenes are optained.–Mechanisms of these Co₂(CO)₈ catalyzed reactions using hydrosilane and carbon monoxide are discussed in which HCo(CO)_n or R₃SiCo(CO)_nL function as catalytically active agents. With these species there are four types of catalytic cycles.–The synthetic possibilities of these catalytic reactions have still not been fully explored.     

Convenient stereoselective synthesis of (Z)-chalcone derivatives from 1,3-diaryl-2-propynyl silyl ethers

Various (Z)-chalcone derivatives were easily synthesized in a stereoselective manner from 1,3-diaryl-2-propynyl silyl ethers by a catalytic reaction using potassium tert-butoxide under very mild conditions after acid treatment.