Rhodium-catalyzed thiophosphinylation and phosphinylation reactions of disulfides and diselenides

Alkyl and aryl dithiophosphinates were synthesized by the reaction of disulfides with biphosphine disulfides in the presence of RhH(PPh₃)₄ and 1,2-diphenylphosphinoethane (dppe). The catalyst also promoted synthesis of thiophosphinates and selenothiophosphinates from disulfides and diselenides.     

Transition-metal-catalyzed carbonylation of allenes with carbon monoxide and thiols

In the presence of a catalytic amount of tetrakis(triphenylphosphine)platinum(0), allenes undergo carbonylative thiolation with carbon monoxide and thiols to provide the corresponding α,β- and β,γ-unsaturated thioesters in good yields. In contrast, the use of rhodium(I) catalysts such as RhH(CO)(PPh₃)₃ in place of Pt(PPh₃)₄ leads to copolymerization of allenes and carbon monoxide without incorporation of thio groups.     

Rhodium-catalyzed arylthiolation reaction of nitroalkanes, diethyl malonate, and 1,2-diphenylethanone with diaryl disulfides: control of disfavored equilibrium reaction

In the presence of catalytic amounts of RhH(PPh₃)₄ and 1,2-bis(diphenylphosphino)ethane (dppe), 1-nitroalkanes reacted with a diaryl disulfide giving 1-arylthio-1-nitroalkanes in air. The equilibrium to form thermodynamically disfavored products was shifted by the rhodium-catalyzed oxidation of thiols to disulfides and water. The thiolation reaction of cyclic nitroalkanes proceeded in high yields provided that suitable diaryl disulfides were employed depending on the substrate: di(p-chlorophenyl) disulfide was used for the thiolation reaction of 1-nitroalkanes, 1-nitrocyclopentane and 1-nitrocycloheptane with acidic α-protons (pK_a 16 and 17); di(p-methoxyphenyl) disulfide for 1-nitrocyclobutane and 1-nitrocyclohexane with less acidic α-protons (pK_a ca. 18). Related reactivities were observed in the thiolation reactions of malonate and 1,2-diphenylethanone.     

Rhodium-catalyzed synthesis of 1-alkynylphosphine oxides from 1-alkynes and tetraphenylbiphosphine

A rhodium complex RhH(PPh₃)₄ catalyzes the C-P bond forming reaction of 1-alkynes and tetraphenylbiphosphine in the presence of 2,4-dimethylnitrobenzene giving 1-alkynylphosphines and its oxides.     

Rhodium-catalyzed highly selective thioformylation of acetylenes with thiols and carbon monoxide

Highly regioselective thioformylation of terminal acetylenes with thiols and carbon monoxide has been developed by the use of rhodium(I) complexes as the catalyst: formyl and thio groups are introduced into the terminal and inner positions of acetylenes, respectively. The thioformylation is performed in the presence of a catalytic amount of rhodium(I) complexes, such as RhH(CO)(PPh₃)₃, RhCl(PPh₃)₃, and RhCl(CO)(PPh₃)₂, under the pressure of CO (3 MPa) at 120°C in CH₃CN to provide β-thio-α,β-unsaturated aldehydes in good yields. This thioformylation can be applied to a variety of terminal acetylenes and aromatic thiols. A mechanistic proposal includes the formation of the rhodium sulfide complex as the key species.     

Rhodium-catalyzed interconversion between acid fluorides and thioesters controlled using heteroatom acceptors

A rhodium complex catalyzed the equilibrium acyl transfer reaction between acid fluorides and thioesters. In the presence of fluoride or thiolate acceptors, the reaction could be shifted to either product. RhH(PPh₃)₄-dppe catalyzed the reaction of acid fluorides and diorgano disulfides in the presence of triphenylphosphine giving thioesters, which was accompanied by triphenylphosphine difluoride. The same complex catalyzed the reaction of aryl thioesters and hexafluorobenzene giving acid fluorides, which was accompanied by 1,4-di(arylthio)-2,3,5,6-tetrafluorobenzenes.     

Rhodium(I) catalyzed decomposition of formic acid

Rh(C₆H₄PPh₂)(PPh₃)₂ catalyzes the decomposition of formic acid to CO₂ and H₂. The initial step is the oxidative addition of formic acid to produce the intermediate Rh(HCO₂)(PPh₃)₃, which probably is followed by β-hydride elimination, to produce CO₂ and RhH(PPh₃)₃. The latter reacts with formic acid to produce H₂ and to reform Rh(HCO₂)(PPh₃)₃.     

Metal-catalyzed phosphinyl ester forming reaction of alcohols and phenols with diphosphine disulfides and a dioxide

Transition metal complexes catalyzed the dialkylphosphinothioation reaction of alcohols and phenols with tetraalkyldiphosphine disulfides in high yields. Phenols were reacted in the presence of RhH(PPh₃)₄ and 1,2-bis(dimethylphosphino)ethane under THF reflux, and alcohols with Pd(OAc)₂ and 1,2-bis(diphenylphosphino)benzene under chlorobenzene reflux. Primary alcohols reacted faster than secondary alcohols under these conditions, and protected tyrosine and serine were phosphinothioated with minimal racemization. Tetraphenyldiphosphine dioxide also underwent the P-O bond formation reaction.     

Polymerization of arylallenes catalyzed by organo-rhodium(I) and -cobalt (I) complexes to give structurally regulated high-mass polymers

Organorhodium complexes, such as RhH(PPh₃)₄, RhH(CO)(PPh₃)₃, Rh(η³-C₃H₄Ph)(CO)(PPh₃)₂, and RhH(dppe)₂ [dppe = 1,2-bis(diphenylphosphinoethane)], catalyze polymerization of phenylallene and of 4-methylphenylallene at 60 °C. High-molecular-weight polymers (M_n>4×10⁵) are isolated from the reaction products by removing the low-molecular-weight (M_n<3×10³) acetone-soluble fraction. The NMR (¹H and ¹³C{¹H}) spectra of poly(phenylallene) (1) and poly(4-methylphenylallene) (2) show the structure formed through selective 2,3-polymerization of the monomers, while similarly obtained poly(2-naphthylallene) (3) is characterized only by ¹H NMR spectroscopy due to its low solubility in common organic solvents. 4-Fluorophenylallene and 4-(trifluoromethyl)-phenylallene do not polymerize under similar conditions in the presence of RhH(PPh₃)₄ catalyst but are turned into low-molecular-weight oligomers. CoH(N₂)(PPh₃)₃-catalyzed polymerization of phenylallene and 4-methylphenylallene at room temperature gives the corresponding polymers with molecular weights in the range M_n=(9–15)×10⁴, in high yields. © 1997 John Wiley & Sons, Ltd.     

Synthese und reaktivität von siliciumübergangsmetallkomplexen : X. Übergangsmetall → carbanion-übertragung von fluorsilyleinheiten,ein weg zu fluorsilyl-substituierten phosphor-yliden

The trifluorophosphine complex RhH(PF₃)(PPh₃)₃, the analogue of the well-known homogeneous catalyst RhH(CO)(PPh₃)₃, has been synthesised and found to be a highly active catalyst for both the hydrogenation and isomerisation of terminal olefins, and the complex RhH(PF₃)₂ (PPh₃)₂ has been found to bring about rapid isomerisation of terminal olefins.     

Carbon–oxygen bond cleavage in allylic esters promoted by low-valent transition-metal hydride complexes

CoH(N₂)(PPh₃)₃ promotes carbon–oxygen (C? O) bond cleavage in allylic carboxylates to give the corresponding olefins at room temperature. On the other hand, RuH₂(PPh₃)₄ and RhH(PPh₃)₄ are mainly active for C? O bond cleavage at elevated temperature. Reaction proceeds through a mechanism involving predissociation of one of the tertiary phosphines from the RuH₂(PPh₃)₄ and RhH(PPh₃)₄ and competitive coordination of allylic carboxylates and PPh₃ to the vacant site on ruthenium and rhodium. A new six-membered metallocyclic complex, Co(OCOCH₂COCH₃)(PPh₃)₂, has been isolated.     

Rhodium-catalyzed carbothiolation reaction of 1-alkylthio-1-alkynes

A rhodium complex derived from RhH(PPh₃)₄ and Me₂PhP catalyzed the carbothiolation reaction of 1-alkylthio-1-alkynes and 1,4-diaryl-1,3-butadiynes giving (Z)-4-alkylthio-4-aryl-3-arylethynyl-3-buten-1-ynes. Terminal alkynes such as 1-decyne and (t-butylthio)acetylene underwent the carbothiolation reaction using a RhH(PPh₃)₄-dppb catalyst. The reactions proceeded via cis-addition with C-C bond formation at the less hindered acetylene carbon.     

Rhodium-catalyzed alkylthio exchange reaction of thioester and disulfide

The Wilkinson complex RhCl(PPh₃)₃ catalyzes equilibrating alkylthio exchange reaction of thioesters with disulfides. The treatment of a thioester and a dialkyl disulfide in refluxing diethyl ketone in the presence of RhCl(PPh₃)₃ (2.5 mol %) for 1.5 h gave an alkylthio exchanged thioester. The reaction of S-methyl ester was conducted shifting the equilibrium by removing volatile dimethyl disulfide.     

Two types of rhodium-catalyzed CS/CS metathesis reactions: formation of CS/CS bonds and CC/SS bonds

A rhodium complex catalyzes two types of single bond metathesis reactions of two CS bonds depending on the added ligand: CS/CS to CS/CS metathesis and CS/CS to CC/SS metathesis. In the presence of a catalytic amount of RhH(PPh₃)₄ and 1,1′-bis(diphenylphosphino)ferrocene (dppf), two 1-alkylthioalkynes exchange alkylthio groups to give equilibrium mixtures of four 1-alkylthioalkynes. When tris(p-methoxyphenyl)phosphine or diphenylmethylphosphine is used, 1,3-butadiynes are obtained.     

Effect of the addition of sulfur compounds on the hydroformylation of 1-hexene catalyzed by rhodium systems

The effect of the addition of triphenylphosphine sulfide, thiophene, benzo[b]thiophene and dibenzo[b,d]thiophene on the hydroformylation of 1-hexene catalyzed by rhodium complexes RhH(CO)₄, RhH(CO)₂(PPh₃)₂ and RhH(CO)₂(diphos) was studied. The addition of these sulfur compounds did not affect the activity of non modified rhodium precatalysts, decreased the activity of the PPh₃-modified one and increased the activity of the diphos-modified ones, which is indicative of the sulfur tolerance of these precatalysts. The linear to branched ratio (l/b) varied from 0.5 to 3.4 for the non-modified precatalyst, and from 1.7 to 3.3 for the phosphine-modified ones.     

Metal catalysed Brooke rearrangement of 3-Halo-1-(trimethylsilyl) propan-2-one (Halo = Cl or Br)

The complexes [IrH(CO)(PPh₃)₃], trans-[IrCI(CO)- (PPh₃)₂], [RhH(PPh₃)₄], [Pd(PPh₃)₄], [Pt(trans-stilbene)(PPh₃)₂] and [Pt(η³-CH₂-COCH₂)-(PPh₃)₂] catalyse the rearrangement of Me₃SiCH₂C(O)CH₂Cl to CH₂?C(OSiMe₃)-CH₂Cl.     

Convenient laboratory synthesis of vinylic silicon compounds via the reactions of acetylene with hydrosilanes catalyzed by group-VIII metal phosphine complexes

The hydrosilylation of acetylene (HCCH) with trichlorosilane, triethoxysilane, methyldichlorosilane, methyldiethoxysilane and $\text{n}$-hexyldichlorosilane in an inert solvent in the presence of various phosphine complexes of Group-VIII metals such as Ru, Rh, Pd and Pt, as well as chloroplatinic acid, was investigated. Among the complexes studied, RuCL₂ (PPh₃)₃, PtCl₂ (PPh₃)₂, RhCl (PPh₃)₃, RhH(PPh₃)₄ and Pt(PPh₃)₄ were found to be the catalysts of choice for the selective syntheses of vinyltrichlorosilane, vinyltriethoxysilane, methylvinyldichlorosilane, methylvinyldiethoxysilane and $\text{n}$-hexylvinyldichlorosilane, respectively.     

Simultaneous determination of thiols and disulfides by high-performance liquid chromatography with fluorescence detection

The proposed simultaneous determination of thiols and disulfides requires 4- (aminosulfonyl)- 7-fluor-2,1,3,-benzoxadiazole (ABD-F) as the pre-column derivatization reagent for thiols and ammonium 7-fluoro-2,1,3,-benzoxadiazole-4-sulfonate (SBD-F) for disulfides followed by chromatography. The thiols and disulfides in solution are treated with ABD-F at 60°C for 5 min in pH 9.3 borate buffer containing 1 nM disodium-EDTA. After removal of excess of ABD-F with ethyl acetate, the remaining disulfides in the aqueous phase are treated with SBD-F at 60°C for 20 min in the presence of tri-n-butylphosphine, a reducing agent. The ABD-thiols and SBD-thiols thus produced are separated by reversed-phase chromatography and detected by fluorimetry (380- nm excitation, 510 - nm emission). SBD-cystein, SBD-homocystein, ABD-homocysteine, ABD-cysteine, SBD-glu- tathione, ABD-homocystein, SBD-N-acetylcystein, ABD-glutatione and ABD-N-acetylcysteine are well separated by linear gradient elution from 0.15 M H₃PO₄/CH₃CN (96:4) to 0.15 M H₃PO₄/CH₃CN (85:15) over 30 min followed by isocratic elution with 0.15 M H₃PO₄/CH₃CN (85:15) fro 10 min. The detection limits for the derivatives are in the range 0.09–0.9 pmol. When the method was applied to the determination of thiols and disulfides in rat tissues, cystein (0.75 μmol g^-1) and cystine (0.62 μmol g^-1) were obtained in kidney and reduced glutathione (1.4–3.4 μmol g^-1) was observed in liver, spleen, heart and testicle.     

Transfer hydrogenation between alcohols and α,β unsaturated ketones with RhH(PPh3)4 as catalyst. Evidence for regiospecificity and an unusual rate-limiting step

In the hydrogen transfer between an alcohol and an α,β-unsaturated ketone with RhH(PPh₃)₄ as catalyst under mild conditions the breaking of the OH bond is, unusually, the rate-determining step, and the hydroxylic hydrogen is selectively transferred to the α-carbon of the ketone.     

Synthesis and characterization of Rh3(μ-PPh2)3(CO)3(PPh3)2: a novel triangular rhodium cluster

Thermal decomposition of RhH(CO)(PPh₃)₃ (Ph = phenyl) in nonane at 120°C yielded a green solid in high yield. The complex was established as Rh₃(μ-PPh₂)₃(CO)₃(PPh₃)₂, (I), X-ray crystallography. I was found to be coordinately unsaturated in the solid state and in solution.