Nucleophilic alkynylation of N-bis(trimethylsilyl)methyl aldimines

N-Bis(trimethylsilyl)methyl aldimines undergo nucleophilic addition reaction with premixed lithium alkynides/BF₃·OEt₂ to give moderate to good yields of N-bis(trimethylsilyl)methyl propargyl amines.     

A simple and efficient biphasic method for the preparation of 4-nitrophenyl N-methyl- and N-alkylcarbamates

Treatment of 4-nitrophenyl chloroformate with alkylammonium hydrochloride salts and solid anhydrous Na₂CO₃ in either CH₂Cl₂ or CH₃CN gave 4-nitrophenyl N-methylcarbamate and other N-alkylcarbamate analogues in excellent yields. Of particular interest is the observation that 4-nitrophenyl N-methylcarbamate, a safer alternative to the highly toxic methyl isocyanate, is obtained in quantitative yield (?95% pure as determined by ¹H NMR) after simple filtration and solvent evaporation.     

Ru-catalyzed enantioselective preparation of methyl (R)-o-chloromandelate and its application in the synthesis of (S)-Clopidogrel

The preparation of methyl (R)-o-chloromandelate via Ru-catalyzed asymmetric hydrogenation and transfer hydrogenation was investigated. With Ru-(R,R)-2,4,6-triisopropyl C₆H₂SO₂-DPEN as the catalyst and HCOOH-Et₃N azeotrope as the hydrogen donor, up to 92% ee was obtained in an optional condition. The synthesis of (S)-Clopidogrel was also studied.     

Chemistry of odorants: stereoselective synthesis of octahydronaphthalene-based perfumery Georgywood, (+,−)-1-[(1R,2S)-1,2,3,4,5,6,7,8-octahydro-1,2,8,8-tetramethylnaphthalen-2-yl]ethan-1-one

A straightforward synthesis of octahydronaphthalene-based fragrance, such as Georgywood, is described. The Lewis acid tin (IV) chloride catalyzed efficiently an original one-pot sequential cycloaddition-clyclization process by reaction of myrcene with 3-bromo-but-3-en-2-one, leading directly to the octahydronaphthalene skeleton in very good yields (85%). Then, dehydrohalogenation with DBU gave the key 2,4-dienone intermediate in excellent yield (85%). Regioselective Michael addition gave rise to the formation of the addition product as a trans/cis diastereoisomeric mixture, by reaction either with CH₃Cu·BF₃ (6:1 ratio, 70%) or (CH₃)₂CuLi/TMSCl reagents (3:1 ratio, 80%). The generation of thermodynamically more stable enolate by treatment of the diastereoisomeric mixture with sodium hydride in tetrahydrofuran in the presence of an excess of methyl iodide, allowed stereoselective introduction of the methyl group at C2, leading to the formation of Georgywood in good yield (60%), as the only diastereoisomer, with a trans stereochemistry of the two methyl groups as demonstrated by NMR experiments.     

Synthesis of novel photolabile glycosides from methyl 4,6-O-(o-nitro)benzylidene-α-d-glycopyranosides

Novel photolabile sugar derivatives bearing a 4- or 6-O-(o-nitro)benzyl group have been prepared from the corresponding methyl 4,6-O-(o-nitro)benzylidene α-d-glycopyranosides. Regioselective cleavage with BF₃·Et₂O/Et₃SiH led to the methyl 6-O-(o-nitro)benzyl gluco- and manno-α-d-glycopyranosides 3 and 6. Inversion of configuration at 4-OH position of gluco and manno derivatives offered the otherwise inaccessible methyl 6-O-(o-nitro)benzyl galacto- and talo-α-d-glycopyranosides 4, 5, and 7. Careful reaction with PhBCl₂/Et₃SiH (3 equiv of reagents, 10 min at −78 °C) led to the desired methyl 4-O-(o-nitro)benzyl gluco- and manno-α-d-glycopyranosides 8 and 9 in very good yield. However, prolonged reaction with 6 equiv of PhBCl₂/Et₃SiH transformed the methyl 4,6-O-(o-nitro)benzylidene α-d-glucopyranoside 11 into the reduced d-glucitol derivative 15. Oxidative cleavage of 5,6-diol function of 15 gave the corresponding photolabile l-xylose 17. The photolabile glucosides 3 and 8 have been further transformed into the photolabile α-C-allyl d-glucopyranosides 20 and 22.     

N-substitution of polybenzimidazoles: Synthesis and evaluation of physical properties

Series of N-substituted polybenzimidazoles (PBI) were synthesized using selective alkyl groups with varying bulk and flexibility, viz., methyl, n-butyl, methylene trimethylsilane and 4-tert-butylbenzyl. PBI-I based on 3,3′-diaminobenzidine (DAB) and isophthalic acid and PBI-BuI based on DAB and 5-tert-butyl isophthalic acid were chosen for N-substitution. Structural characterizations of substituted polymers by FT-IR and ¹H NMR revealed elimination of hydrogen bonding. Evaluation of their physical properties revealed that N-substitution rendered better solvent solubility in common organic solvents, more open polymer matrix, but reduced thermal properties in comparison to their respective parent PBI. 4-tert-butylbenzyl, methylene trimethylsilane or n-butyl group substituted polymers were soluble even in chlorinated solvents (CHCl₃ and TCE). Substantial variations in gas permeability of inert gases, He and Ar and attractive P_He/P_Ar selectivity, especially after methyl group substitution depicted potential of these materials for gas separation.     

Michael additions of dihydropyrimidines and 2-amino-1,3,4-thiadiazoles to α,β-ethylenic compounds: using polyethylene glycols as a green reaction media

Polyethylene glycol (PEG) was found to be an inexpensive, non-toxic, and effective medium for the Michael additions of 3,4-dihydropyrimidines to α,β-ethylenic compounds to provide N3-functionalized dihydropyrimidines in the presence of K₂CO₃ as the catalyst. Under similar reaction conditions, 2-amino-5-aryloxymethyl-1,3,4-thiadiazoles reacted with methyl acrylate to give unexpected products 5H,6H-[1,3,4]thiadiazolo[1,2-a]pyrimidine-7-ones through tandem Michael addition and intramolecular cyclization.     

Synthesis of N,N-Ac,Boc laurylthio sialoside and its application to O-sialylation

The combination of the 5-N-tert-butoxycarbonyl (Boc) group of laurylthio sialoside and cyclopentyl methyl ether (CPME) as a solvent enhanced the reactivity and α-selectivity of the sialyl donor during sialylation. Selective deprotection of the N-Boc group of sialoside, including an acid-sensitive isopropylidene function, was successfully achieved by Yb(OTf)₃-SiO₂. Transformation of N,N-Ac,Boc into an N-acetylglycolyl group of sialoglycoside was easily performed via selective N-deacylation of the mixed Ac-N-Boc carbamate, subsequent Boc group removal, and acylation.     

Synthesis of tricyclic isoindoles and thiazolo[3,2-c][1,3]benzoxazines

The thermolysis of (3R,9bS)-5-oxo-2,3,5,9b-tetrahydrothiazolo[2,3-a]isoindole-3-carboxylic acids in Ac₂O led to novel 3-methylene-2,5-dioxo-3H,9bH-oxazolo[2,3-a]isoindoles and chiral (9bS)-5-oxo-2,3,5,9b-tetrahydrothiazolo[2,3-a]isoindoles were obtained on FVP. Starting from l-cysteine methyl ester (3R,10bR)-5-oxo-2,3-dihydro-10bH-[1.3]thiazolo[3,2-c][1,3]benzoxazines were obtained as single stereoisomers. The thermolysis of (3R,10bR)-5-oxo-2,3-dihydro-10bH-[1.3]thiazolo[3,2-c][1,3]benzoxazine-3-carboxylic acid in Ac₂O gave 5-acetyl-2-phenyl-2,3-dihydrothiazole. The structures of methyl (3R,9bS)-5-oxo-2,3,5,9b-tetrahydrothiazolo[2,3-a]isoindole-3-carboxylate 1a and methyl (2R,4R)-N-chlorocarbonyl-2-(2-hydroxyphenyl)thiazolidine-4-carboxylate 9 were determined by X-ray crystallography.     

Elucidation of methyl tert-butyl ether degradation with Fe/H2O2 by purge-and-trap gas chromatography-mass spectrometry

Degradation of methyl tert-butyl ether (MTBE) with Fe²⁺/H₂O₂ was studied by purge-and-trap gas chromatography-mass spectrometry. MTBE was degraded 99% within 120 min under optimum conditions. MTBE was firstly degraded rapidly based on a Fe²⁺/H₂O₂ reaction and then relatively slower based on a Fe³⁺/H₂O₂ reaction. The dissolved oxygen decreased rapidly in the Fe²⁺/H₂O₂ reaction stage, but showed a slow increase in the Fe³⁺/H₂O₂ reaction stage. tert-Butyl formate, tert-butyl alcohol, methyl acetate and acetone were identified as primary degradation products by mass spectrometry. A preliminary reaction mechanism involving two different pathways for the degradation of MTBE with Fe²⁺/H₂O₂ was proposed. This study suggests that degradation of MTBE can be achieved using the Fe²⁺/H₂O₂ process.     

Synthesis of N-acyl-N,O-acetals from N-aryl amides and acetals in the presence of TMSOTf

Secondary amides undergo in situ silyl imidate formation mediated by TMSOTf and an amine base, followed by addition to acetal acceptors to provide N-acyl-N,O-acetals in good yields. An analogous, high-yielding reaction is observed with 2-mercaptothiazoline as the silyl imidate precursor. Competing reduction of the acetal to the corresponding methyl ether via transfer hydrogenation can be circumvented by the replacement of CY₂NMe with 2,6-lutidine under otherwise identical reaction conditions.     

Synthesis, X-ray crystal structure, and reactivity of Pd2(μ-dotpm)2 (dotpm = bis(di-ortho-tolylphosphino)methane)

Alkylation of PdCl₂(dotpm) (dotpm = bis(di-ortho-tolylphosphino)methane) with n-butyllithium produces the binuclear Pd(0) complex Pd₂(μ-dotpm)₂ and the elimination byproducts 1-butene, cis-2-butene, trans-2-butene, butane, and octane. The dibutyl complex, Pd(dotpm)(n-Bu)₂, is presumed to be the reaction intermediate. The crystal structure of Pd₂(μ-dotpm)₂ reveals that the methylene groups of the bridging dotpm ligands are located on opposite sides of the Pd₂P₄ unit, forming an 8-membered ring that is in an elongated chair conformation. The four phosphorus atoms are not coplanar, and the P1-P2-P3-P4 ring has a torsion angle of 13.8°, which minimizes the spatial interactions among the o-tolyl rings. The Pd-Pd bond distance is 2.8560(6) Å, which indicates that there is a weak “closed-shell” bonding interaction between the d¹⁰-d¹⁰ metal centers. Each palladium atom has a nearly linear geometry, and the eight methyl groups of the dotpm ligands shield the open coordination sites on the metal centers. Four methyl groups shield the metal atoms above and below the Pd₂P₄ ring cavity, and four methyl groups block the open metal sites outside of the Pd₂P₄ ring. The Pd₂(μ-dotpm)₂ complex readily undergoes oxidative addition of dichloromethane to form the rigid A-frame complex Pd₂Cl₂(μ-CH₂)(μ-dotpm)₂.     

rac-BINAP-PdCl2 catalyzed Heck reactions of 3-formylquinolin-2-yl chlorides with methyl acrylate: synthesis of methyl 3-(3-formylquinolin-2-yl) acrylates

rac-BINAP-PdCl₂ catalytic system catalyzed Heck reaction of 3-formylquinolin-2-yl chlorides with methyl acrylate in DMA is described to the synthesis of methyl 3-(3-formyl-quinolin-2-yl)-acrylates, in good to excellent yields. The reaction could be also extended with other activated alkenes to afford Heck products. Fused-benzene ring in heterocyclic and carbocyclic moieties was found to enhance the yields.     

A simple and convenient synthesis of 2-(perfluoroalkyl)-4H-chromenes from salicyl N-tosylimines or salicylaldehydes and methyl 2-perfluoroalkynoates

Et₃N-catalyzed reactions of salicyl N-tosylimines or salicylaldehydes with methyl 2-perfluoroalkynoates proceed smoothly at room temperature in dichloromethane (DCM) or dimethyl sulfoxide (DMSO) to give the corresponding fluorinated chromenes in good to excellent yields with high regioselectivity.     

Synthesis of the repeating trisaccharide unit of the cell wall lipopolysaccharide of Escherichia coli type 8

NIS/TfOH mediated glycosidation of methyl 3,4,6-tri-O-benzyl-α-d-mannopyranoside with phenyl 2-O-acetyl-3,4,6-tri-O-benzyl-1-thio-α-d-mannopyranoside furnished the corresponding disaccharide derivative in excellent yield and α-selectivity. Zémplen deacetylation of the same followed by reaction with BSP/Tf₂O-preactivated phenyl 4,6-O-benzylidene-2,3-di-O-benzyl-1-thio-α-d-mannopyranoside generated methyl 4,6-O-benzylidene-2,3-di-O-benzyl-β-d-mannopyranosyl-(1→2)-3,4,6-tri-O-benzyl-α-d-mannopyranosyl-(1→2)-3,4,6-tri-O-benzyl-α-d-mannopyranoside in very good yield and excellent β-selectivity. Pd/C catalyzed hydrogenation of the latter finally afforded the repeating trisaccharide of Escherichia coli 8 O-antigen as its methyl glycoside.     

Synthesis and stereochemical resolution of functional [5]pericyclynes

Three different kinds of ring carbo-mers of [5]cyclitol ethers were targeted as challenging examples of functional [5]pericyclynes. Three tertiary pentaaryl-carbo-[5]cyclitol methyl ethers were synthesized through a [11+4] ring-closing double addition of triphenyl- and tri-p-anisyl-undecatetrayn-diides to dibenzoylacetylene. These compounds, obtained as oily mixtures of stereoisomers, are stable and can behave as acetylenic ligands of one or two Co₂(CO)₆ units. NMR analysis reveals that the broad diasteroisomeric dispersity of a triether, is consistently reduced in the symmetrized pentaether. Three bis-secondary triaryl-carbo-[5]cyclitol methyl ethers with adjacent CH(OR) vertices were synthesized through a similar [11+4] ring-closing process, where the same tetrayn-diides add to both the carbaldehyde ends of the (η²-OCH-CC-CHO)Co₂(CO)₆ complex. Despite the possibility of tautomeric isomerization, the occurrence of two adjacent bis-propargylic carbinol vertices does not diminish the stability of the [5]pericyclyne framework. Finally, two bis-secondary carbo-[5]cyclitol methyl ethers with non-adjacent CH(OH) vertices were synthesized through an alternative [10+5] ring-closing process. The bis-secondary carbo-[5]cyclitols are regarded as isohypsic equivalents of the challenging [C,C]₅carbo-cyclopentadienyl cation. A diphenyl-hexaoxy-[5]pericyclyne with two non-adjacent secondary carbinol vertices was also prepared through a [10+5] ring-closing strategy: this molecule is an isohypsic equivalent of the previously calculated zwitterionic carbo-cyclopentadienone, which could be observed as a DCI/NH₃-MS fragment after treatment with SnCl₂/HCl. Analytical HPLC showed that the C₁₁ triphenyl-undecatetrayne precursor of the [11+4] strategy was obtained as a statistical 1:2:1 mixture of the three possible diastereoisomers. Semi-preparative HPLC allowed for the resolution of this mixture. The pure major diastereoisomer was employed to prepare a partly resolved sample of pentamethoxy-pentaphenyl-[5]pericyclyne. Analytical HPLC showed that the latter corresponds to the statistical distribution of the expected three residual diastereoisomers. Semi-preparative HPLC finally afforded samples of diastereoisomerically pure pentamethoxy-[5]pericyclyne as crystalline solids.     

A high hydroarylation activity of K2PtCl4/AgOTf catalyst in the reaction of propiolic acid with unactivated and activated arenes

A mixed catalyst K₂PtCl₄/AgOTf showed the highest activity for hydroarylation of propiolic acid, among palladium and platinum catalysts. This catalyst was effective for hydroarylation with less reactive benzene to give cis-cinnamic acid in good yield. The hydroarylation with toluene gave a higher yield of hydroarylation products than that with benzene and resulted in ortho/para orientation with an almost statistical ratio, suggesting that the result is very close to that of the Friedel-Crafts alkylation with methyl bromide or p-nitrobenzyl chloride. Hydroarylation of propiolic acid with other electron-rich arenes proceeded efficiently in the presence of the K₂PtCl₄/AgOTf catalyst in trifluoroacetic acid forming cis-cinnamic acids in good to high yields. This method was also applied to hydroarylation of ethyl propiolate.     

Synthesis, structural and larvicidal studies of some triorganotin 2-(p-chlorophenyl)-3-methylbutyrates

A series of triorganotin 2-(p-chlorophenyl)-3-methylbutyrates, (R₃SnO₂CCH(CH(CH₃)₂)C₆H₄Cl-4), where R = methyl, ethyl, n-propyl, n-butyl, phenyl and cyclo-hexyl, have been synthesized. Elemental analyses, Mössbauer, Infrared and NMR spectroscopies have been used to characterize their structures. Based on the spectroscopic results, all the complexes with the exception of the tricyclohexyl compound were found to be five-coordinated in the solid state while the tricyclohexyltin derivative was determined to be four-coordinated. Structural assignments based on spectroscopic data are supported by the crystallographic results of four of the triorganotin butyrates (trimethyl-, tri-n-propyl-, tri-n-butyl- and tricyclohexyltin 2-(p-chlorophenyl)-3-methylbutyrate). Multinuclear NMR spectroscopy studies indicated that all the complexes were tetrahedral in solution. Larvicidal activities of the complexes were evaluated against the 2nd instar stage of the Anopheles stephensi, Aedes aegypti and Culex pipiens quinquefasciatus mosquitoes. The toxicity data indicate that there does not appear to be any significant differences of the compounds towards the different mosquito species based on their averaged toxicity values. In addition, the toxicity of the triorganotin compounds towards the mosquito larvae was concluded to be dependent on both the compound and the species of mosquito larvae.     

Synthesis of pure stereoisomers of benzo[b]thienyl dehydrophenylalanines by Suzuki cross-coupling. Preliminary studies of antimicrobial activity

Several benzo[b]thienyldehydrophenylalanines were synthesized from pure stereoisomers of the methyl ester of N-(tert-butoxycarbonyl)-β-bromodehydrophenylalanine as an extension of our previously reported method for the synthesis of dehydrotryptophan analogues to dehydrophenylalanine derivatives. The latter were obtained in high yields by N-deprotection and bromination of N,N-bis-(tert-butoxycarbonyl)-(Z)-dehydrophenylalanine using TFA and NBS. This was carried out in two steps or in a one pot procedure resulting in different E/Z ratios. These compounds were coupled under Suzuki cross-coupling conditions [Pd(PPh₃)₄, Na₂CO₃, DME/H₂O] with several boronic benzo[b]thienyl acids in good to high yields maintaining the stereochemistry of the starting materials. The best yields were obtained when the boronic acid was in position 7 of the benzo[b]thiophene and with the E isomer of the brominated dehydrophenylalanine. In some cases it was possible to increase the lower yields by changing the Pd source to PdCl₂(PPh₃)₂. A model dipeptide was prepared coupling a benzo[b]thienyldehydrophenylalanine with the methyl ester of alanine. Preliminary antimicrobial studies were performed with both isomers of one of the β, β-diaryldehydroalanines obtained. The results show that the compounds are selective and very active (very low MICs) against Gram positive bacteria (B. cereus and B. subtilis) the Z-isomer being more active. The compounds are also active against Candida albicans presenting similar MICs.     

Stereoselectivity ratios in a simple Diels-Alder reaction in aqueous salt solutions of alcohols

This is the first exhaustive report on the variation of stereoselectivity ratios for a simple Diels-Alder reaction between cyclopentadiene and methyl acrylate. The reaction was carried out in aqueous mixtures of methanol, ethanol, propan-1-ol and butan-1-ol in presence of LiClO₄, LiCl, NaCl, KCl, CaCl₂ and MgCl₂. The endo stereoisomer decreases with the increase in carbon chain length of the alcohol. However, LiClO₄, a salting-in agent in water becomes salting-out in aqueous mixtures of alcohols. The solvent properties, thus can be attuned by adjusting the amount of solvents and salts.