Substrate-controlled diastereoselective aziridination of alkenes using 3-acetoxyaminoquinazolinone in the presence of hexamethyldisilazane

8-Phenylmenthol derived α,β-unsaturated esters were aziridinated highly diastereoselectively using 3-acetoxyamino-2-ethylquinazolinone. The yields of these aziridines were greatly improved in the presence of hexamethyldisilazane.     

Preparation of α-amino ketones, β-amino hydroxylamines using asymmetric aza-Henry reactions of N-p-tolylsulfinylimines with nitroethane

N-Sulfinylimines derived from aromatic and aliphatic aldehydes react with nitroethane and NaOH, yielding mainly two diastereoisomeric β-nitroamines as the result of a highly diastereoselective reaction and further epimerization of the carbon linked to the nitro group. The resulting β-nitroamines are used as precursors of N-sulfonyl α-amino methyl ketones and β-amino hydroxylamines.     

Convenient stereoselective synthesis of 3-hydroxy-2-iodo-2(E)-alkenyl sulfides via iodohydroxylation of 1,2-allenyl sulfoxides in the presence of BnSH

The iodohydroxylation of 1,2-allenyl sulfoxides with I₂ in the presence of BnSH affords 3-hydroxy-2-iodo-2(E)-alkenyl sulfides in good yields and selectivities. The stereochemistry for the products of this transformation is opposite to what was obtained from the iodohydroxylation of 1,2-allenyl sulfides. Based on the results of some control experiment, a mechanism was proposed.     

Imination of sulfoxides mediated by IBX with Sc(OTf)3 as catalyst

Herein we utilized, for the first time, 2-iodoxybenzoate along with scandium triflate as a specific oxidant for PhthNH₂ to create sulfoximines. This method efficiently effects imination of aryl, benzyl, cyclic and alkyl substituted S?O bonds with good to excellent yields. In addition, sterically encumbered sulfoxides have been studied and found that the present protocol is the worthy choice. This facile method does not require either inert atmosphere or anhydrous solvents.     

Highly efficient and chemoselective reduction of sulfoxides using the system silane/oxo-rhenium complexes

This work reports a novel method for the reduction of sulfoxides with silanes catalyzed by high valent oxo-rhenium(V) and (VII) complexes. The catalytic system PhSiH₃/ReIO₂(PPh₃)₂ (1 mol %) proved to be highly efficient for the reduction of a wide range of sulfoxides in excellent yields under mild conditions. This novel methodology is also highly chemoselective, tolerating several functional groups such as –CHO, –CO₂R, –Cl, –NO₂, and double or triple bonds.     

Selective and efficient oxidation of sulfides to sulfoxides using ammonium cerium (IV) nitrate in the presence of a catalytic amount of KBr or NaBr

A wide range of aliphatic or aromatic sulfides are selectively oxidized to the corresponding sulfoxides using ammonium cerium (IV) nitrate (CAN) and a catalytic amount of KBr or NaBr in the presence of wet SiO₂ in CH₂Cl₂ under heterogeneous conditions in moderate to high yields. Correspondence: Mohammad Ali Zolfigol, Faculty of Chemistry, Bu-Ali Sina University, P.O. Box 6517838683, Hamadan, Iran; Kamal Amani, Department of Chemistry, Faculty of Science, University of Kurdistan, P.O. Box 6617715175, Sanandaj, Iran.     

Selective and efficient oxidation of sulfides to sulfoxides with N-bromosuccinimide in the presence of β-cyclodextrin in water

A simple and highly selective oxidation of sulfides to sulfoxides with N-bromosuccinimide (NBS) catalyzed by β-cyclodextrin in water has been developed. A series of sulfides were oxidized selectively at room temperature in excellent yields. This reaction proceeds without over-oxidation to sulfones under mild conditions using water as a solvent and has many advantages over the existing methodologies.     

Palladium catalyzed aroylation of NH-sulfoximines with aryl halides using chloroform as the CO precursor

A palladium-catalyzed aroylation of NH-sulfoximines for the efficient synthesis of N-aroyl sulfoximines from aryl halides and chloroform has been developed. The mild reaction conditions (temperature, catalyst loading) and the use of a CO surrogate render this transformation a useful method for the synthesis of N-aroyl sulfoximines from available feedstock.     

Metalation of sulfoxides in the benzodiazine series. Diazines. Part 44

The metalation of 12 benzodiazines sulfoxides was tested. This reaction was effective with 3-sulfinylcinnolines, 5-phenylsulfinyl-2-tert-butylquinazoline and 8-tert-butylsulfinyl-2-tert-butyl-4(3H)-quinazolinone.     

An efficient stereoselective synthesis of (2S,3S)-3-hydroxypipecolic acid using chlorosulfonyl isocyanate

An efficient stereoselective syntheses of (2S,3S)-3-hydroxypipecolic acid and (2R,3S)-2-hydroxymethylpiperidin-3-ol were achieved from p-anisaldehyde via the regioselective and diastereoselective introduction of an N-protected amine group using chlorosulfonyl isocyanate, ring-closing methathesis, and oxidation of p-methoxyphenyl group as the key steps.     

One-pot reaction of 2-formylbenzoates,hexamethyldisilazane, and diethyl phosphite in the presence of Yb(OTf)3: Synthesis of 3-phosphonate phthalides

Reaction of 2-formylbenzoates with hexamethyldisilazane and diethyl phosphite in the presence of Yb(OTf)₃ proceeded smoothly at room temperature to afford addition adducts, which were readily cyclized to 3-phosphonate phthalides by adding trifluoroacetic acid (TFA). The reactions employing Sc(OTf)₃ instead of Yb(OTf)₃ produced 3-phosphonate isoindolinones without addition of TFA.     

Selective and mild oxidation of sulfides to sulfoxides by H_2O_2 using DBUH-Br_3 as catalyst

<正>DBUH-Br_3 catalyzed selective conversion of sulfides to sulfoxides in the presence of H_2O_2 as oxidizing agent is described.The reaction was performed selectively at room temperature and relatively short reaction times.     

A gentle and efficient route for the deoxygenation of sulfoxides using catecholborane (HBcat; cat = 1,2-O2C6H4)

The addition of catecholborane (HBcat; cat = 1,2-O₂C₆H₄) to a wide range of sulfoxides affords the corresponding sulfides, dihydrogen, and catBOBcat. The diboron compound catBOBcat acts like a Lewis acid and will coordinate one molecule of the starting sulfoxide. Although deoxygenations with bulky or electron withdrawing sulfoxides are slow, these reactions can be greatly accelerated with the use of excess HBcat or by employing a rhodium catalyst.     

Synthesis and characterization of a bifunctional nanomagnetic solid acid catalyst (Fe3O4@CeO2/SO42−) and investigation of its efficiency in the protection process of alcohols and phenols via hexamethyldisilazane under solvent‐free conditions

In this research, Fe₃O₄@CeO₂ (FC) was synthesized using the coprecipitation method and functionalized by an ammonium sulfate solution to achieve a heterogeneous solid acid Fe₃O₄@CeO₂/SO₄^2? (FCA) catalyst. The synthesized bifunctional catalyst was used in the protection process of alcohols and phenols using hexamethyldisilazane (HMDS) at ambient temperature under solvent‐free conditions. Due to its excellent magnetic properties, FCA can easily be separated from the reaction mixture and reused several times without significant loss in its catalytic activity. Excellent yield and selectivity, simple separation, low cost, and high recyclability of the nanocatalyst are outstanding advantages of this procedure. The characterization was carried out using different techniques such as Fourier transform infrared spectroscopy (FT‐IR), scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), X‐ray diffraction (XRD), and vibrating sample magnetometry (VSM).     

A novel method for the reduction of sulfoxides with the N,N,N’,N’-tetrabromobenzene-1,3-disulfonamide (TBBDA)/PPh3 system

A new method is described for the reduction of sulfoxides to sulfides using N,N,N’,N’-tetrabromobenzene-1,3-disulfonamide [TBBDA] in combination with triphenylphosphine. Good to excellent yields, short reaction times, high efficiency and facile isolation of the desired products are the advantages of this method.     

在还原剂存在下CO2作为碳源合成苯并噻唑反应的研究进展

CO₂是一种来源丰富、价廉易得的C1资源。将CO₂高值化利用是“双碳”目标实现的途径之一。苯并噻唑类化合物广泛应用于医药、农药等领域。因此,从绿色和可持续发展角度来看,利用CO₂作为碳源合成杂环化合物苯并噻唑具有重要的意义。本文综述了氢气、硅烷和硼烷三类还原剂还原CO₂与邻氨基苯硫酚反应合成苯并噻唑的方法,分析了各种方法的优缺点,阐述了采用不同还原剂的反应机理,并指出了这一领域面临的问题。另外,对该领域未来的发展方向进行了展望,如绿色环保溶剂的使用、新型高效还原剂的研究、苯并噻唑新合成路线的设计等。     

Nitric acid in the presence of supported P2O5 on silica gel: an efficient and novel reagent for oxidation of sulfides to the corresponding sulfoxides

This paper describes an efficient and easy method for oxidation of sulfides 1 to their corresponding sulfoxides 2 with nitric acid in the presence of supported P₂O₅ on silica gel under solvent-free conditions in high yields.     

Synthesis of dispiropyrrolidines from chromone-3-carbaldehyde using sarcosine and ninhydrin as the source of an azomethine ylide

An efficient one-pot synthesis of several novel dispirochromanopyrrolidines has been accomplished by the reaction of chromone-3-carbaldehyde, sarcosine and ninhydrin. The structures were confirmed by single crystal X-ray diffraction studies.     

Electrochemical tandem synthesis of oximes from alcohols using KNO3 as the nitrogen source, mediated by tin microspheres in aqueous medium

Electrochemical oximation of alcohols was realized with KNO(3) as the nitrogen source mediated by tin microspheres.     

Epitaxial growth of InN films by molecular-beam epitaxy using hydrazoic acid (HN3) as an efficient nitrogen source

Epitaxial InN films have been successfully grown on c-plane GaN template by gas-source molecular-beam epitaxy with hydrazoic acid (HN3) as an efficient nitrogen source. Results in residual-gas analyzer show that the HN3 is highly dissociated to produce nitrogen radicals and can be controlled in the amounts of active nitrogen species by tuning HN3 pressure. A flat and high-purity InN epifilm has been realized at the temperature near 550 degrees C, and a growth rate of 200 nm/hr is also achieved. Moreover, the epitaxial relationship of the InN(002) on the GaN(002) is reflected in the X-ray diffraction, and the full-width at half-maximum of the InN(002) peak as narrow as 0.05 degrees is related to a high-quality crystallinity. An infrared photoluminescence (PL) emission peak at 0.705 eV and the integrated intensity increasing linearly with excitation power suggest that the observed PL can be attributed to a free-to-bound recombination.