Synthesis of an olefin-containing cyclic peptide using the solid-phase Horner-Emmons reaction

Linear and cyclic olefin peptides containing the substrate sequence for human T-cell leukemia virus type-1 (HTLV-1) were efficiently synthesized on a solid support using the Horner-Emmons reaction. The precursor peptide aldehyde was prepared by oxidation of the corresponding peptide alcohol with Dess-Martin periodinane. The oxidation reaction proceeded quantitatively on a cross-linked ethoxylate acrylate resin (CLEAR) support instead of a polystyrene-based support. Cyclization on the solid support was achieved via an amide bond formation mediated by EDC/HOAt to yield a single major product. The linear olefin peptide was cleaved by HTLV-1 protease at the scissile site, whereas the cyclic olefin peptide functions as a competitive inhibitor rather than a substrate.     

Segment Coupling to a Highly Hindered N-Terminal, Alamethicin-Related alpha-Aminoisobutyric Acid (Aib) Residue

A model [6+5] segment coupling process involving a C-terminal valine hexapeptide acid and a resin-attached pentapeptide amide, which N-terminated in a hindered Aib unit, was examined using a variety of HOAt-derived coupling reagents. Best results were observed with N-HAPyU in DCM solvent in which loss of configuration amounted to 5.8%.     

Controlling the outcome of overacylation of N-protected aminooxyacetic acid during the synthesis of an aminooxy-peptide for chemical ligation

An aminooxy-containing peptide, the nucleophile partner for oxime ligations, is usually grafted on a NH₂-peptide resin by activating a protected aminooxyacetic acid as an active ester. Here, we have shown that its subsequent coupling to NH₂-peptide resin competes with the overacylation of the -NH-O- nitrogen and that the overacylation level increases with the basicity of the reaction mixture. Moreover, we found that overacylation is prevented when the COOH of the Aoa-derivatives is engaged in an amide bond.     

Transformations of (1E,3E)-1-(benzoylamino)-4-(dimethylamino)buta-1,3-diene-1,2,3-tricarboxylates into pyridine and pyrrole derivatives

New, highly functionalised (1E,3E)-1-(benzoylamino)-4-(dimethylamino)buta-1,3-diene-1,2,3-tricarboxylates proved to be useful and versatile reagents in the formation of highly substituted pyridine, N-aminopyridine, pyrrole and pyrido[3,4-c]pyridazine derivatives. The formation of the particular type heterocyclic system is dependent on the starting (1E,3E)-1-(benzoylamino)-4-(dimethylamino)buta-1,3-diene-1,2,3-tricarboxylate. By an appropriate choice of different ester groups it is possible to drive the reactions towards the formation of either pyridine or pyrrole derivatives.     

Synthesis of 1H-pyrrolo[3,2-c]quinoline derivatives via palladium-catalyzed heteroannulation of 2-aryl-3-iodo-4-(phenylamino)quinolines and 4-(N,N-allylphenylamino)-2-aryl-3-iodoquinolines

Palladium(0)/copper iodide catalyzed Sonogashira cross-coupling of 2-aryl-3-iodo-4-(phenylamino)quinolines with terminal alkynes afforded series of 1,2,4-trisubstituted 1H-pyrrolo[3,2-c]quinolines in a single-step operation. Conversely, the 4-(N,N-allylphenylamino)-2-aryl-3-iodoquinoline derivatives were found to undergo PdCl₂(PPh₃)₂/CuI catalyzed intramolecular Heck reaction to yield the corresponding 1,3,4-trisubstituted 1H-pyrrolo[3,2-c]quinolines.     

‘Bis-ornithine’ (2,2-bis(aminopropyl)glycine): a new tetravalent template for assembling different functional peptides

Synthesis of bis-ornithine, a new C^α,α-disubstituted α-amino acid bearing orthogonally protected α and δ amine groups is reported. Bis-ornithine (bisOrn) and dipeptides containing bis-ornithine have been synthesized in solution up to multigram scale. As a first example, one of these compounds Boc-βAla-bisOrn(Alloc)₂-OH has been attached to a solid support and used as template for the synthesis of a symmetrical assemblage of peptides.     

Rapid access to 3-(N-substituted)-aminoquinolin-2(1H)-ones using palladium-catalyzed C-N bond coupling reaction

A series of 3-(N-substituted)-aminoquinolin-2(1H)-ones have been synthesized by the palladium-catalyzed C-N coupling reaction starting from 3-bromoquinolin-2-(1H)-ones. Various nucleophiles including amines, amides, sulfonamides, carbamates and ureas have been used successfully. In all the cases, the reactions take place rapidly in 1,4-dioxane and proceed in good to excellent yield using palladium acetate as a catalyst, Xantphos as a ligand and Cs₂CO₃ as a base.     

Reaction of N-fluoropyridinium fluoride with isonitriles and diazo compounds: a one-pot synthesis of (pyridin-2-yl)-1H-1,2,3-triazoles

Reaction of N-fluoropyridinium fluoride generated in situ with a series of isonitriles and diazo compounds led to the formation of the corresponding (pyridine-2-yl)-1H-1,2,3-triazoles in good yields (37-59%). Best outcome was consistently achieved with both aromatic isonitriles and stabilized diazo derivatives. The proposed reaction mechanism involves the intermediate formation of a highly reactive carbene species.     

Effect of type and concentration of surfactants on swelling behavior of poly[<Emphasis Type="Italic">N</Emphasis>-[3-(dimethylamino)propyl]methacrylamide-co- <Emphasis Type="Italic">N,N</Emphasis>-methylenebis(acrylamide)] hydrogels

A series of thermosensitive hydrogels were prepared from N-[3-(dimethylamino)propyl]methacrylamide (DMAPMA) monomer by using 11.6–17.8% (m/m) N,N-methylenebis(acrylamide) (MBAAm) as the crosslinker and comonomer in water. A kinetic study of the absorption determined the transport mechanism. The diffusion coefficients of these hydrogels were calculated for the Fickian mechanism. It was shown that the swelling behavior of the P(DMAPMA-co-MBAAm) hydrogels can be controlled by changing the amount of MBAAm. The swelling equilibrium of the P(DMAPMA-co-MBAAm) hydrogels was also investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB). In pure water, irrespective of the amount of MBAAm, the P(DMAPMA-co-MBAAm) hydrogels showed a discontinuous phase transition between 30 and 40 °C. However, the transition changed from discontinuous to continuous with the addition of surfactants, this is ascribed to the conversion of non-ionic P(DMAPMA-co-MBAAm) hydrogel into polyelectrolyte hydrogels due to binding of surfactants through the hydrophobic interaction. Additionally, the amount of free SDS and DTAB ions was measured at different temperatures by a conductometric method, it was found that the electric conductivity of the P(DMAPMA-co-MBAAm) – surfactant systems depended strongly on both the type and concentration of surfactant solutions.     

A facile synthesis of 2-[1-(dialkylamino)alkyl]-4H-3,1-benzoxazin-4-ones by the reaction of 1,1-dimethylethyl 2-isocyanobenzoates with N,N-dialkyliminium iodides

A convenient synthetic approach to 2-[1-(dialkylamino)alkyl]-4H-3,1-benzoxazin-4-ones has been developed. Thus, 1,1-dimethylethyl 2-isocyanobenzoates, which can be readily prepared from 2-nitrobenzoic acids by a simple four-step sequence, react with N,N-dialkyliminium iodides without using any catalysts under mild conditions to give the desired products in generally fair-to-good yields.     

Efficient synthesis of 5-fluoroalkylated 1H-1,2,3-triazoles and application of the bromodifluoromethylated triazole to the synthesis of novel bicyclic gem-difluorinated 1H-pyrano[3,4-d][1,2,3]-triazol-4-one compounds

A series of 5-fluoroalkylated 1H-1,2,3-triazoles were synthesized in good yield by the regiospecific 1,3-dipolar cycloaddition reaction of (Z)-ethyl 3-fluoroalkyl-3-pyrrolidino-acrylates with aryl or benzyl azides. In the cases of benzyl azides, addition of Na₂CO₃ was crucial for a high yield of the triazoles. Tetrakis(dimethylamino)ethylene (TDAE) promoted reaction of bromodifluoro-methylated triazole with aldehydes affording a new class of β,β-difluoro-β-triazolyl alcohol derivatives, which were lactonized with catalytic amount of p-toluenesulfonic acid in toluene at 80-90°C to give a series of novel bicyclic gem-difluorinated 1H-pyrano[3,4-d][1,2,3]-triazol-4-one compounds in good yield.     

Domino reaction of 3-nitro-2-(trifluoromethyl)-2H-chromenes with 2-(1-phenylalkylidene)malononitriles: synthesis of functionalized 6-(trifluoromethyl)-6H-dibenzo[b,d]pyrans and a rare case of [1,5] sigmatropic shift of the nitro group

A variety of functionalized 6-(trifluoromethyl)-6H-dibenzo[b,d]pyrans were easily synthesized in good yields under mild conditions by a domino reaction of 3-nitro-2-(trifluoromethyl)-2H-chromenes with 2-(1-phenylethylidene)- and 2-(1-phenylpropylidene)malononitriles. In the latter case, intermediate 7-amino-10-methyl-10-nitro-9-phenyl-6-(trifluoromethyl)-10,10a-dihydro-6H-benzo[c]chromene-8-carbonitriles were isolated as a result of a rare [1,5] sigmatropic shift of the nitro group.     

Efficient synthesis of phosphonodepsipeptides derived from norleucine

In the present work, we describe in detail an efficient solution synthesis of norleucine-derived phosphonopeptides mimicking the peptide sequences Nle-Gly(Ala) and Nle-Gly(Ala)-Val. The most efficient strategy involved use of the benzyl group. The synthesis was achieved through BOP-catalysed coupling of the monobenzyl ester of the N-Cbz-protected phosphonate derivative of norleucine with the hydroxyl moieties of derivatised l-lactic or glycolic acid. Subsequently, complete deprotection of the products was achieved in good yields by one-step Pd-catalysed hydrogenolysis. We also prepared the Fmoc-Nle-Ψ[PO(OH)O]-CH₂-COOH synthon and demonstrated that this precursor is a suitable building block for the solid-phase synthesis of cysteine-containing phosphonopeptides.     

Synthesis of substituted 3-(3-chloro-1H-pyrazol-5-yl)quinoxalin-2(1H)ones

Synthetic strategies to gain access to all four isomers of 3-(3-chloro-1H-pyrazol-5-yl)quinoxalin-2(1H)ones with monosubstituted benzo core (i.e., compounds 8a–d) are described. Preparation of these heterocyclic compounds succeeded starting from only two different substituted 2-nitroanilines (i.e., 3-methoxy- and 4-methoxy-2-nitroaniline) in three or five steps, respectively.     

Unexpected 1,2,3-triazole formation in the reaction of diethylaluminum azide with α′-amino-α,β-unsaturated ketones

4-Acyl-1H-1,2,3-triazoles are formed from diethylaluminum azide and α′-(N,N-dibenzylamino)-α,β-unsaturated ketones by [3+2] cycloaddition of azide, followed by 1,5 hydride transfer to the β carbon of the triazoline side chain and fragmentation of the tertiary amino group promoted by coordination of the latter to the Lewis acid. The structure of a triazole product is confirmed by X-ray crystallography.     

Synthesis and characterization of 2-substituted bornane pharmacophores for novel cannabinergic ligands

Analogously to the fenchyl and adamantyl groups, the bornyl and epimeric isobornyl groups are compact lipophilic substituents that can be incorporated into drug design to improve pharmacological or physicochemical properties. Methods are reported for the synthesis and characterization of 2-substituted norbornanes and bornanes that can serve as novel cannabinergic ligand intermediates.     

Synthesis of 3,4-dihydrobenzo[g]isoquinoline-1(2H)-ones and 3,4-dihydroisoquinoline-1(2H)-ones skeleton via intramolecular electrophilic cyclization

An original alternative approach to isoquinolines based on the installation of a benzene nucleus on a performed heterocyclic ring. Synthesis of 3,4-dihydrobenzo[g]isoquinoline-1(2H)-ones and 3,4-dihydroisoquinoline-1(2H)-ones via intramolecular electrophilic cyclization of 3,4-disubstituted lactams is reported.     

Synthesis of the end-capped 5-(N,N-dimethylamino)naphthyl-1-ethynyl derivatives and their 1,4-di[5-(N,N-dimethylamino)naphthyl]-1,3-butadiynes: anti rotamer structure

A new family of the end-capped 5-(N,N-dimethylamino)naphthylethynyl chains were synthesized, as terminal acetylenes or poly(yne) structures, by heterocoupling between 5-iodo-N,N-dimethylnaphthalen-1-amine and 2-methyl-3-butyn-2-ol or 4-(5-iodo-1-naphthyl)-2-methyl-3-butyn-2-ol, catalyzed by the palladium-copper system. Catalytic homocoupling of the terminal acetylenes, affords to 1,4-dinaphthyl-1,3-butadiyne nanostructures. X-ray diffraction analysis of 1,4-di(α-naphthyl)-1,3-butadiyne shows that the naphthalene rings are in the anti configuration along the acetylene axis. All the conjugated compounds show an important fluorescent emission radiation.     

3,5-Disubstituted 6H-pyrrolo[1,2-c][1,2,3]triazoles from Morita-Baylis-Hillman adducts of propargyl aldehydes

A simple method for synthesizing several 6H-pyrrolo[1,2-c][1,2,3]triazole derivatives having a methoxycarbonyl or an acetyl group at C-5 position and 7,8-dihydro-4H-[1,2,3]triazolo[1,5-a]indol-5(6H)-ones via an intramolecular 1,3-dipolar cycloaddition reaction of azido enynes, which were readily obtained from the Morita-Baylis-Hillman acetates of propargyl aldehydes with sodium azide, has been developed.