CuI/l-proline catalyzed click reaction in glycerol for the synthesis of 1,2,3-triazoles

Despite the apparent simplicity of the copper(I) iodide catalyzed CuAAC reaction, the conversion of the catalytic species, i.e. Cu(I) to thermodynamically more stable Cu(II), via aerial oxidation or disproportionation is a major issue. To stabilize the Cu(I) species, the reaction is ideally carried out under an inert atmosphere in the presence of additives such as alcohols, amines, thiols, and aldehydes. Herein, we report the first CuI catalyzed click reaction without an inert atmosphere by employing the CuI/l-proline system in glycerol. The method showed remarkable stability towards sensitive functional groups such as acetonides and 1,2,4-trioxanes.     

Synthesis of 5H-pyridazino[4,5-b]indoles and their benzofurane analogues utilizing an intramolecular Heck-type reaction

The title ring systems were prepared from pyridazin-3(2H)-one precursors in novel, efficient pathways. 2-Methylbenzo[b]furo[2,3-d]pyridazin-1(2H)-one was synthesized via a regioselective nucleophilic substitution reaction of a 2-methyl-4,5-dihalopyridazin-3(2H)-one with phenol followed by an intramolecular Heck-type reaction. The same molecule and its 6-phenyl analogue were also prepared via reaction of 2-methyl-5-iodopyridazin-3(2H)-one or 2-methyl-5-chloro-6-phenylpyridazin-3(2H)-one, respectively, with 2-bromophenol or 2-iodophenol followed by Pd-catalyzed cyclodehydrohalogenation. Moreover, a new approach for the synthesis of 2-methyl-2,5-dihydro-1H-pyridazino[4,5-b]indol-1-ones was also elaborated utilizing a Heck-type ring closure reaction on 5-[(2-bromophenyl)amino]-2-methylpyridazin-3(2H)-ones which were obtained via Buchwald-Hartwig amination of 2-methyl-5-halopyridazin-3(2H)-ones with 2-bromoaniline.     

Aryldiazonium silica sulfates as efficient reagents for Heck-type arylation reactions under mild conditions

An efficient and straightforward procedure for Heck-type arylation reactions was studied using aryldiazonium silica sulfates and olefins in the presence of a catalytic amount of Pd(OAc)₂. These reactions were carried out in water at room temperature without using a base or additional ligands. The use of a non-toxic solvent, a simple and clean work-up, short reaction times, and good yields are advantages of this method.     

Dabco/SOCl 2 , Mild,and Convenient Reagent for the Preparation of Symmetrical Carboxylic Acid Anhydrides

Various types of carboxylic acids undergo rapid dehydration with 1,4-diazabicyclo[2.2.2]octane, dabco/thionyl chloride, under mild reaction conditions to afford symmetrical acid anhydrides in high isolated yields.     

Efficient Stille cross-coupling reaction catalyzed by the Pd(OAc)2/Dabco catalytic system

[reaction: see text] An efficient Pd(OAc)2/Dabco-catalyzed Stille cross-coupling reaction procedure has been developed. In the presence of Pd(OAc)2 and Dabco (triethylenediamine), various aryl halides including aryl iodides, aryl bromides, and activated aryl chlorides were coupled efficiently with organotin compounds to afford the corresponding biaryls, alkene, and alkynes in good to excellent yields. Furthermore, high TONs [turnover numbers, up to 980,000 TONs for the coupling reaction of 1-bromo-4-nitrobenzene and furan-2-yltributyltin] for the Stille cross-coupling reaction were observed.     

Iodine as a mild and versatile reagent for the synthesis of 1,3-dioxane derivatives via the Prins reaction

Iodine is found to be an effective reagent for the cross-coupling of olefins with aldehydes under mild conditions to produce 4-substituted 1,3-dioxane derivatives in excellent yields and in short reaction times with high selectivity. The use of iodine makes this procedure simple, convenient, cost-effective and practical. This method works not only with formaldehyde but also with acetaldehyde, propionaldehyde and cyclohexanecarboxaldehyde.     

Synthesis and application of ortho-palladated complex of (4-phenylbenzoylmethylene)triphenylphosphorane as a highly active catalyst in the Suzuki cross-coupling reaction

The ortho-metallated complex [Pd(μ-Cl){κ₂(C,C)-[C₆H₄(PPh₂CHC(O)C₆H₄-Ph-4)}]₂ (2a) was prepared by refluxing of Pd(OAc)₂ and {(Ph)₃PCHCOC₆H₄-Ph-4} (PhBPPY) of in CH₂Cl₂ followed by addition of an excess of KCl in MeOH Complex (2a) reacts with triphenylphosphine to give the mononuclear derivative [Pd(Cl)(PhC₆H₄COCHPPh₂C₆H₄)(PPh₃)] (3a) whose crystal structure has been determined by single crystal X-ray diffraction. The Suzuki reactions of aryl bromides and chlorides of varying electron density using complex (3a) as an efficient catalyst were performed, giving the cross-coupling products in good to excellent yields.     

Simple protocol for enhanced (E)-selectivity in Julia-Kocienski reaction

A short and efficient Julia-Kocienski olefination protocol, based upon the use of chelating agents (18-crown-6 or TDA-1 for K⁺; 12-crown-4 or HMPA for Li⁺), was developed. This protocol enhances the (E)-selectivity of the reaction and the desired olefins are obtained generally with >10:1 (E/Z)-selectivity.     

Cyclopalladated ferrocenylimine: a highly effective catalyst for the borylation/suzuki coupling reaction

The cyclopalladated ferrocenylimine was an efficient catalyst for the borylation/Suzuki coupling reaction. The catalytic loading for the reaction containing bromoarenes was 1 mol %. When iodobenzene was used, the catalytic loading was as low as 0.1 mol %. Furthermore, the cyclopalladated ferrocenylimine also exhibited excellent catalytic power in the case of substrates containing electron-donating substituents, with yields reaching 93% or higher.     

A highly active ionic liquid catalyst for Morita-Baylis-Hillman reaction

The Morita-Baylis-Hillman reaction is an efficient carbon-carbon bond forming reaction for the preparation of α-methylene-β-hydroxycarbonyl compounds. A new and highly active di-naphthalene imidazolium salt has been synthesized. We have found that 1,3-bis[2-(naphthalene-2-yloxy)propyl]imidazolium bromid promoted the Morita-Baylis-Hillman reaction of various aryl aldehyde compounds in the absence of solvents. Our studies show that the Morita-Baylis-Hillman reaction by the influence of ionic liquid to give a high yield and short reaction time.     

Designing a sequential Ugi/Ullmann type reaction for the synthesis of indolo[1,2-a]quinoxalinones catalyzed by CuI/l-proline

An efficient strategy for the one-pot syntheses of indolo[1,2-a]quinoxalinones catalyzed by CuI have been developed. The procedures combine the Ugi four-component reaction of aldehydes, 2-iodoaniline, 2-indole carboxylic acid, and isocyanides followed by the copper-catalyzed intramolecular N-arylation of the Ugi product in one-pot procedure, which afford the desired products in good to very good yields.     

有机膦酸盐衍生的氮掺杂的磷酸钴/碳纳米管杂化材料作为高效氧还原电催化剂（英文）

随着环境污染和能源危机的日益严重,探索高效的非贵金属氧还原电催化剂来替代商业Pt/C迫在眉睫.其中,报道比较多的是具有钴基活性物种和氮掺杂碳的复合材料例如Co-Nx-C, Co3O4/GO, Co-N/CNT等,该复合材料具有高导电性、良好的稳定性和优异的催化活性.与其他钴基催化剂相比,磷酸钴由于其成本低廉,对环境友好,多功能的优良特性,已被广泛应用于催化、吸附、分离及储能等领域,在电催化方面也有极大的应用潜力.研究表明,磷酸基团不仅可以充当质子受体,也会诱导局部钴原子的几何结构发生扭曲,从而有利于水分子的吸附并促进析氧反应的发生.此外,磷酸钴也被证实具有一定的氧还原活性.尽管磷酸钴电催化剂的研究已经取得了一定进展,磷酸根有利于质子传输,但是其导电性很差,不利于电荷的转移和传输,使得其电催化活性不高.将磷酸钴和导电碳材料复合是解决问题的有效方法.而且,磷酸钴在碱性溶液中并不稳定,极大限制了其在电催化氧还原中的应用.金属有机膦酸盐是一类包含金属离子和有机膦酸配体的杂化材料,通过简单的焙烧便可以很容易地得到金属无机磷酸盐,并且在焙烧过程中氮掺杂的碳也会原位产生,并包覆在磷酸钴的表面,使得其导电性和催化活性大大提高.为此,本研究组制备了有机膦酸钴衍生的磷酸钴和氮磷掺杂的石墨烯的复合材料并用于电催化氧还原和析氧反应,所得到的材料导电性和稳定性良好,然而,该催化剂的表观活性与商业Pt/C相比仍有较大差距,且使用有机膦酸钴作为前驱体对活性的影响也不甚清楚.因此,本文采用含氮的有机膦酸配体乙二胺四亚甲基膦酸钠(EDTMPS)为磷源制备了氮掺杂的磷酸钴/碳纳米管杂化材料(CoPiC-N/CNT-3),其催化活性和稳定性良好,并进一步探讨了各种不同因素对电催化活性的影响.XRD和TEM结果表明,用这种方法得到的磷酸钴(CoPiC)为Co2P2O7物相,与磷酸二氢钠为磷源制备得到的CoPi相比,CoPiC的表面有石墨化碳层的存在, EDS图谱表明, Co, P, C, N均匀地掺杂到复合材料的骨架结构中.Raman光谱结果表明,石墨化碳层的存在和适量的碳纳米管的引入均可以增强复合材料的石墨化程度并提高了导电性,而氮掺杂导致其缺陷位点增多.XPS结果进一步表明,有机膦酸钴可以作为前驱体可制得氮掺杂的磷酸钴/碳纳米管杂化材料.电催化反应测试表明, CoPi C-N/CNT-3的氧还原活性与商业Pt/C相当,其遵循的是4电子的反应路径,而且抗甲醇氧化能力和稳定性均优于Pt/C.原因主要归结于以下几点:(1)磷酸钴颗粒与氧化碳纳米管的协同作用可以显著增强氧还原催化活性,引入的碳纳米管可以克服磷酸钴导电性差的缺陷;(2)磷酸钴在复合材料中分散均匀,使得可以充分利用催化剂的活性位点;(3)氮掺杂可以调变材料的电子结构,从而改善催化活性;(4)石墨化碳层的存在可以改善材料的电子导电性和稳定性,有利于电子转移并可以保护磷酸钴颗粒在催化氧还原反应过程中不被电解液腐蚀.可见,所制有机膦酸衍生的氮掺杂的磷酸钴/碳纳米管杂化材料有望替代Pt/C催化剂,并推动清洁可再生能源领域的相关研究.     

Novel cross-coupling reactions between organotellurides and Grignard reagents employing a MnCl2/CuI catalytic system

We present a general protocol for the cross-coupling reaction of Grignard reagents and organic tellurides. Aryl Grignard reagents react stereospecifically with vinyl tellurides in the presence of a catalytic amount of manganese (II) chloride and copper (I) iodide to produce good yields of the corresponding cross-coupling products.     

室温有氧条件下高稳定性Pd(P-Phos)Cl2配合物催化Suzuki-Miyaura交叉偶联反应

制备了新型Pd(P-Phos)Cl₂配合物, 并通过¹H, ¹³C和³¹P核磁共振及X射线单晶衍射对其结构进行了确认及表征. 结果表明, 该配合物是室温有氧条件下Suzuki-Miyaura交叉偶联反应的高稳定高效催化剂, 并具有广泛的底物适用性. 催化剂用量较低, 且转化数(TON)最高可达49000.     

Biopolymer-metal complex wool-Pd as a highly active heterogeneous catalyst for Heck reaction in aqueous media

Heterogeneous palladium catalysts, a biopolymer complex wool-Pd, have been applied in water-mediated coupling reactions of aryl bromides without assistance of any phosphine ligands. The catalyst was characterized by XPS, ICP. The results showed that aryl bromides could carry out the coupling reaction with a variety of alkenes at 80 °C, in aqueous media under atmospheric condition. More importantly, the cheap catalyst is stable, which shows negligible metal leaching, and retain good activity for at least ten successive runs without any additional activation treatment. This approach would be very useful from a practical viewpoint.     

An efficient Stille cross-coupling reaction catalyzed by Pd(OAc)2/DAB-Cy catalytic system

An efficient palladium-catalyzed Stille cross-coupling reaction has been developed. In the presence of 3 mol% of Pd(dba)₂ and 6 mol% of DAB-Cy (1,4-dicyclohexyl-diazabutadiene), various aryl halides (iodides and bromides) were coupled with organotin compounds to afford the corresponding biaryls and alkyne in good to excellent yields. Furthermore, high TONs [turnover numbers, TONs up to 950,000 for the reaction of 1-iodo-4-nitrobenzene and tributyl(phenyl)stannane] for the Stille cross-coupling reaction were observed.     

A simple PdCl2/O2/DMF catalytic system for highly regioselective cyclotrimerization of olefins with electron-withdrawing groups

A highly regioselective cyclotrimerization of olefins with electron-withdrawing groups in a PdCl₂/O₂/DMF catalytic system is disclosed, and a possible mechanism has also been proposed, which reveals the PdCl₂-catalyzed cyclotrimerization of olefins with electron-withdrawing groups goes through a quite different pathway from that of alkynes.     

Palladium supported on hydrotalcite as a catalyst for the Suzuki cross-coupling reaction

The efficiency of various palladium salts as catalysts in the Suzuki cross-coupling reaction, and the influence of the base and temperature used on its conversion, were studied. The use of PdCl₂ supported on hydrotalcite as catalyst in the presence of potassium carbonate as base was found to provide the best results. Reaction temperatures above 90 °C ensured conversion levels on a par with those for many homogeneous catalysts.