A new route to 2,2′,3,3′-tetrasubstituted binaphthyls

Based on an ortho-lithiation protocol of 2,2′-dibromo-1,1′-binaphthyl four tetrasubstituted binaphthyls, 2,2′-dibromo-3,3′-diiodo-, 3,3′-dibromo-2,2′-diiodo-, 2,2′,3,3′-tetrabromo-, and 2,2′,3,3′-tetraiodo-1,1′-binaphthyls have been prepared in excellent yield which in turn proved to be versatile key intermediates in the synthesis of various 2,2′,3,3′-tetrasubstituted 1,1′-binaphthyl derivatives.     

Synthesis and characterizations of 3,3′-bis(diphenylphosphinoamine)-2,2′-bipyridine and 3,3′-bis(diphenylphosphinite)-2,2′-bipyridine and their chalcogenides

New bis(phosphinoamine) and bis(phosphinite) derivatives of 2,2′-bipyridine were prepared through a single step reaction of 3,3′-diamino-2,2′-bipyridine or 3,3′-dihydroxy-2,2′-bipyridine with diphenylchlorophosphine, respectively. Their P = E chalcogenides (E = O, S, Se) were also prepared. All the new compounds were characterized by elemental analysis, IR and NMR spectroscopies. The molecular structure of 3,3′-bis(diphenylthiophosphinite)-2,2′-bipyridine was elucidated by single-crystal X-ray crystallography.     

Synthesis of 5,5′-diarylated 2,2′-bithiophenes via palladium-catalyzed arylation reactions

2,2′-Bithiophene and 3,3′-dicyano-2,2′-bithiophenes are diarylated directly with aryl bromides at the 5- and 5′-positions accompanied by C-H bond cleavage in the presence of Pd(OAc)₂ and a bulky phosphine ligand using Cs₂CO₃ as base. In the reaction using (2,2′-bithiophen-5-yl)diphenylmethanol as the substrate, monoarylation at the 5-position via C-C bond cleavage occurs selectively to give 5-aryl-2,2′-bithiophenes and the subsequent arylation with a different aryl bromide affords the corresponding unsymmetrically 5,5′-diarylated products.     

Scandium triflate-catalyzed 6,6′-diiodination of 2,2′-dimethoxy-1,1′-binaphthyl with 1,3-diiodo-5,5-dimethylhydantoin

Scandium triflate-catalyzed iodination of 2,2′-dimethoxy-1,1′-binaphthyl with 2 equiv of 1,3-diiodo-5,5-dimethylhydantoin (DIH) proceeded to give 6,6′-diiodo-2,2′-dimethoxy-1,1′-binaphtyl in 98% yield and subsequent deprotection of methyl groups provided 6,6′-diiodo-1,1′-binaphthol, which is a useful ligand or reagent for many enantioselective transformations. Use of 2 equiv of NIS in place of DIH in the presence of scandium triflate, however, did not successfully yield 6,6′-diiodo-2,2′-dimethoxy-1,1′-binaphtyl, indicating that one of two types of iodine atoms in DIH is more reactive toward the iodination than iodine in NIS.     

An efficient synthesis of 5,5′-diaryl-2,2′-bichalcophenes

A convenient and high yielding synthesis of 5,5′-diaryl-2,2′-bichalcophenes (furans, thiophenes, and selenophenes) by the hexabutylditin-mediated homocoupling of 5-bromochalcophenes is described. This approach has been applied to the synthesis of the blue-light-emitting compound 5,5′-bis(4-aminophenyl)-2,2′-bifuryl (PFDA).     

5,5′-二甲基-2,2′-二茚满-1,1′,3,3′-四酮的合成及结构表征

本文以4-甲基邻苯二甲酸酐为原料, 成功地合成了5,5′-二甲基-2,2′-二茚满-1,1′,3,3′-四酮(2). 通过元素分析、核磁共振、红外光谱及质谱等测试手段, 确定了化合物2的结构与存在形式, 通过ESR测试发现化合物2具有顺磁性.     

Potential 1,1′-binaphthyl NLO-phores with extended conjugation between positions 2 and 6, and 2′ and 6′

A synthetic approach is reported which allows independent introduction of alkynyl groups to positions 2,2′ and then to 6,6′ of binaphthyls. The approach is based on the high selectivity of the Stephens-Castro alkynylation of 6,6′-dibromo-2,2′-diiodo-1,1′-binaphthyl. The tetraalkynylated derivatives exhibit extended conjugation between groups at positions 2 and 6, and 2′ and 6′, achieved by overcoming steric hindrance at positions 2 and 2′ by using alkynyl spacers.     

A convenient synthesis of 6,6′-dimethyl-2,2′-bipyridine-4-ester and its application to the preparation of bifunctional lanthanide chelators

We describe a convenient scalable synthesis of 4-carbomethoxy-6,6′-dimethyl-2,2′-bipyridine based on the application of modified Negishi cross-coupling conditions. The use of this building block in the preparation of a number of dissymmetrically 6,6′-trisubstituted-2,2′-bipyridines and of bifunctional lanthanide chelators is also reported.     

Synthesis and non-linear optical and redox properties of 6-nitro-6′-piperidyl-2,2′-bisbenzothiazole: a new type of push-pull molecules

The present paper describes the synthesis, the non-linear optical and redox properties of 6-nitro-6′-piperidyl-2,2′-bisbenzothiazole, the first described member of a new family of push-pull structures based in the 2,2′-bisbenzothiazole.     

The highly regiospecific synthesis and crystal structure determination of 1,1′-2,5′ substituted ring-locked ferrocenes

1,1′-Ferrocene biscarboxaldehyde (1) has been prepared and the aldehyde groups were subsequently protected with acetal groups to produce 1,1′-bisacetalferrocene (2). A ring-locked ferrocene was synthesised by further derivatisation of the cyclopentadiene rings at the 2,2′ positions with phosphine substituents to produce 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene (3), which was subsequently coordinated to either a nickel chloride (5) or nickel bromide (6) metal centre. The ring-locked ferrocene complexes produced 2,5′-bis-(acetal)-1,1′-diphenylphosphinoferrocene substitution patterns. The acetal protecting groups of 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene were removed to produce 1,1′-bis-carboxaldehyde-2,2′-diphenylphosphinoferrocene (4). The Cp rings of 1,1′-bisacetalferrocene were also further derivatised at the 2,2′ positions with a silane to produce the ring-locked 1,1′-siloxane-2,5′-bisacetalferrocenophane (7). The acetal protecting groups were removed from this to produce 1,1′-siloxane-2,5′-ferrocenophanecarboxaldehyde (8). For both the phosphine and siloxane electrophiles, the substitution on the Cp rings gives chiral products (obtained as racemic mixtures). Due to the highly regioselective nature of the reaction and diastereoselectivity in the products only C₂-symmetric compounds were observed without the presence of meso diastereoisomers. Subsequent ring-locking forced the Cp rings to rotate, leading to 1,1′-ring-locked ferrocenes with 2,5′-arrangement of the acetal groups (i.e. on opposite faces of the ferrocene unit).     

Facile synthesis of 6-iodo-2,2′-dipivaloyloxy-1,1′-binaphthyl, a key intermediate of high reactivity for selective palladium-catalyzed monofunctionalization of the 1,1′-binaphthalene core

A high-yielding procedure for selective monoiodination of 2,2′-dihydroxy-1,1′-binaphthyl (BINOL) is reported. 6-Iodo-2,2′-dipivaloyloxy-1,1′-binaphthyl, obtained in three steps starting from BINOL in 88% overall yield, proved to be a highly efficient substrate in various palladium-catalyzed coupling (Stille, Heck, Sonogashira, and Suzuki coupling) and carbonylation reactions compared to the analogous 6-bromo derivative.     

Synthesis and structural investigation of 1′,3′,3′-trimethyl-6-hydroxy-spiro(2H-1-benzopyran-2,2′-indoline), 1′,3′,3′-trimethyl-6-methacryloyloxy-spiro(2H-1-benzopyran-2,2′-indoline) and a copolymer with methyl methacrylate by 1D and 2D NMR spectroscopy

Photo-responsive spiropyran-based compounds, such as, 1′,3′,3′-trimethyl-6-hydroxy-spiro(2H-1-benzopyran-2,2′-indoline) [OHSP], its monomer, such as 1′,3′,3′-trimethyl-6-methacryloyloxy-spiro(2H-1-benzopyran-2,2′-indoline) [MOSP] and its copolymers with methyl methacrylate [MMA] were synthesised using conventional synthetic routes. The copolymerisation was carried out either in tetrahydrofuran [THF] or in toluene using 2,2′-azobisisobutyronitrile [AIBN] as an initiator. The structures of these materials were investigated using ¹H and ¹³C NMR spectroscopy. DEPT-135, HCCOSW and COSY45 NMR experiments were used to assign and interpret the complex structure of spiropyran based materials.     

One-pot synthesis of 5,5′-dibromo-2,2′-dipyridylacetylene and its boronic acid derivative

5,5′-Dibromo-2,2′-dipyridylacetylene was prepared from 2,5-dibromopyridine and (trimethylsilyl)acetylene via the new one-pot synthesis approach using a regioselective palladium-catalyzed coupling reaction with a 60% yield. Several protocols of lithium-halogen exchange were then attempted to synthesize 6,6′-(1,2-ethynediyl)bis[3-pyridylboronic acid] from 5,5′-dibromo-2,2′-dipyridylacetylene. The former was successfully obtained with a 54% yield by a reverse addition method using toluene and THF and it showed potential as a useful building block for cross-coupling reactions in the formation of carbon-carbon bonds.     

The first approach to optically active 2,2′-bipyridine alkyl sulfoxides

The synthesis of 6,6′-bis(alkylsulfanyl)-2,2′-bipyridines and their asymmetric oxidation to non-racemic 2,2′-bipyridine alkyl sulfoxides using either (+)-(8,8-dichlorocamphorylsulfonyl)oxaziridine or a modified Sharpless reagent is reported.     

The development of an approach toward sterically-hindered chiral 2′-aryl-1,1′-binaphthalenes functionalized at position 2

Several approaches were examined for the preparation of 1,1′-binaphthalene derivatives bearing sterically demanding ortho-substituted aryl at position 2′ which are suitable for further functionalization at position 2. Steric hindrance of ortho-substituted aryl groups was critical for the approach through BINOL monotriflate. Among variations of cross-coupling reactions of 2,2′-dihalo-1,1′-binaphthalenes, Negishi arylation of an enantiopure 2,2′-dibromide was found to be the method of choice for regioselective and stereoconservative preparation of the target 2′-monoarylated precursor. Functionalization of the latter at position 2 was demonstrated by bromine substitution via lithiation followed by the reaction with several electrophiles.     

A simple synthesis of 2,2′-bipyrroles from pyrrole

2,2′-Bipyrroles, which are obvious precursors for the synthesis of 2,2′-bipyrrole-based natural products, are synthesized in three steps from pyrrole employing known pyrrolyl ketoalcohols by a sequential alcohol oxidation and Paal-Knorr pyrrole synthesis.     

Acid-catalyzed condensation of 2,2′-diamino-1,1′-biaryls for the synthesis of benzo[c]carbazoles

2,2′-Diamino-1,1′-biaryls were found to undergo ring-closure condensation reaction to afford benzo[c]carbazoles in good to excellent yield. Coupled with the synthesis of 2,2′-biaryldiamines from diaryl hydrazides via [3,3]-sigmatropic rearrangement, it constitutes a new efficient synthetic method for benzo[c]carbazoles and related compounds.     

Synthesis and characterization of 6,6″′-bis(anthracen-9-yl)-2,2′;6′,2″;6″,2″′-quaterpyridine

New bianthracene-quaterpyridine ligand 6,6″′-bis(anthracen-9-yl)-2,2′;6′,2″;6″,2″′-quaterpyridine L has been obtained in a multistep synthesis using Suzuki–Miyaura and Stille-type coupling reactions. The dianthracene ligand L has four nitrogen-donor atoms and can form different supramolecular architectures with transition metal ions. Ligand L and intermediate compounds have been characterized by spectroscopic methods and elemental analyses. 2-(Anthracen-9-yl)-6-bromopyridine and 6-(anthracen-9-yl)-6′-bromo-2,2′-bipyridine have been also characterized by X-ray crystallography.     

6,6′-Dimethyl-2,2′-bipyridine-4-ester: A pivotal synthon for building tethered bipyridine ligands

We describe an efficient and scalable synthesis of 4-carbomethoxy-6,6′-dimethyl-2,2′-bipyridine starting from easily available substituted 2-halopyridines and based on the application of modified Negishi cross-coupling conditions. This compound is a versatile starting material for the synthesis of 4-functionalized 2,2′-bipyridines bearing halide, alcohol, amine, and other functionalities, suitable for conjugation to biological material (2a-c, 3a-g). The utility of this compound in the construction of more complex architectures was further demonstrated by the synthesis of two bifunctional lanthanide chelators; an open chain ligand based on one 2,2′-bipyridine unit and a cryptand based on three 2,2′-bipyridine units [N₂(bpy)₃COOMe]. In the field of luminophoric biolabels, the photophysical properties of the corresponding Eu(III) cryptate are reported.     

Synthesis of 1′,3,3′,4-tetrahydrospiro[chromene-2,2′-indoles] as a new class of ultrafast light-driven molecular switch

A new class of ultrafast light-driven molecular switch has been designed and synthesized. The reaction of 1-substituted 2-methylidene-3,3-dimethyl-2,3-dihydro-1H-indoles with 2-chloromethyl-4-nitrophenol afforded 1′,3,3′,4-tetrahydrospiro[chromene-2,2′-indoles], following a basic workup. The spectroscopic properties and nanosecond-resolved photoinduced dynamics of five compounds in the 1′,3,3′,4-tetrahydrospiro[chromene-2,2′-indole] family were investigated.