A new tetradentate ligand for atom transfer radical polymerization

The properties of a ligand, including molecular structure and substituents, strongly affect the catalyst activity and control of the polymerization in atom transfer radical polymerization (ATRP). A new tetradentate ligand, N,N′‐bis(pyridin‐2‐ylmethyl‐3‐hexoxo‐3‐oxopropyl)ethane‐1,2‐diamine (BPED) was synthesized and examined as the ligand of copper halide for ATRP of styrene (St), methyl acrylate (MA), and methyl methacrylate (MMA), and compared with other analogous linear tetrdendate ligands. The BPED ligand was found to significantly promote the activation reaction: the CuBr/BPED complex reacted with the initiators so fast that a large amount of Cu(II)Br₂/BPED was produced and thus the polymerizations were slow for all the monomers. The reaction of CuCl/BPED with the initiator was also fast, but by reducing the catalyst concentration or adding CuCl₂, the activation reaction could be slowed to establish the equilibrium of ATRP for a well‐controlled living polymerization of MA. CuCl/BPED was found very active for the polymerization of MA. For example, 10 mol% of the catalyst relatively to the initiator was sufficient to mediate a living polymerization of MA. The CuCl/BPED, however, could not catalyze a living polymerization of MMA because the resulting CuCl₂/BPED could not deactivate the growing radicals. The effects of the ligand structures on the catalysis of ATRP are also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3553–3562, 2004     

Hybrid atom transfer radical polymerization system for balanced polymerization rate and polymer molecular weight control

A hybrid polymerization system that combines the fast reaction kinetics of conventional free radical polymerization and the control of molecular weight and distribution afforded by ATRP has been developed. High‐free radical initiator concentrations in the range of 0.1–0.2 M were used in combination with a low concentration of ATRP catalyst. Conversions higher than 90% were achieved with ATRP catalyst concentrations of less than 20 ppm within 2 h for the hybrid ATRP system as compared with ATRPs where achieving such conversions would take up to 24 h. These reaction conditions lead to living polymerizations where polymer molecular weight increases linearly with monomer conversion. As in living polymerization and despite the fast rates and low ATRP catalyst concentrations, the polydispersity of the produced polymer remained below 1.30. Chain extension experiments from a synthesized macroinitiator were successful, which demonstrate the living characteristics of the hybrid ATRP process. Catalyst concentrations as low as 16 ppm were found to effectively mediate the growth of over 100 polymer chains per catalytic center, whereas at the same time negating the need for post polymerization purification given the low‐catalyst concentration. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2294–2301, 2010     

Preparation of molecularly imprinted polymer microspheres via atom transfer radical precipitation polymerization

The first combined use of atom transfer radical polymerization (ATRP) and precipitation polymerization in the molecular imprinting field is described. The utilized polymerization technique, namely atom transfer radical precipitation polymerization (ATRPP), provides MIP microspheres with obvious molecular imprinting effects towards the template, fast template binding kinetics and an appreciable selectivity over structurally related compounds. The living chain propagation mechanism in ATRPP results in MIP spherical particles with diameters (number‐average diameter D_n ≈ 3 μm) much larger than those prepared via traditional radical precipitation polymerization (TRPP). In addition, the MIP microspheres prepared via ATRPP have also proven to show significantly higher high‐affinity binding site densities on their surfaces than the MIP generated via TRPP, while the binding association constants K_a and apparent maximum numbers N_max of the high‐affinity sites as well as the specific template bindings are almost the same in the two cases. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3257–3270, 2009     

Synthesis of 4-arm methyl methacrylate star polymer by atom transfer radical polymerization

The synthesis of 4-arm methyl methacrylate star polymer had been achieved successfully by atom transfer radical polymerization using CuCl as catalyst, 2, 2′-bipyridyl as ligand and pentaerythritol tetrakis (2-bromoisobutyrate) as the initiator. The star polymer was characterized by ¹H-NMR and GPC, by which the precise 4-arm structure of the PMMA was confirmed. __________ Translated from Journal of Shaanxi Normal University (Natural Science Edition), 2008, 36(2) (in Chinese)     

利用原子转移自由基聚合方法制备一种新型聚合物整体柱固相萃取材料初探

利用两步原子转移自由基聚合(ATRP)方法,初步建立了新型聚合物整体柱固相萃取(SPE)材料制备的新方法。首先利用ATRP方法,以乙二醇二甲基丙烯酸酯（EDMA）为交联剂,在室温条件下,在滤头中原位快速聚合制备得到负载有聚合物整体柱的萃取装置;然后采用表面诱导的电子转移活化再生原子转移自由基聚合(ARGET ATRP)方法进行表面修饰,得到了聚(二甲基氨基乙基甲基丙烯酸酯)(PDMAEMA)修饰的柱体;进一步将此整体柱用作萃取材料,实现了对激素类药物的富集分析。本研究表明:ATRP有望作为一种简单、有效及反应条件温和的聚合方法用于整体柱的制备,且该方法有潜力实现固相萃取材料在不同装置中的制备。     

Synthesis of polypropylene graft copolymers by the combination of a polypropylene copolymer containing pendant vinylbenzene groups and atom transfer radical polymerization

This article discusses a facile and inexpensive reaction process for preparing polypropylene‐based graft copolymers containing an isotactic polypropylene (i‐PP) main chain and several functional polymer side chains. The chemistry involves an i‐PP polymer precursor containing several pendant vinylbenzene groups, which is prepared through the Ziegler–Natta copolymerization of propylene and 1,4‐divinylbenzene mediated by an isospecific MgCl₂‐supported TiCl₄ catalyst. The selective monoenchainment of 1,4‐divinylbenzene comonomers results in pendant vinylbenzene groups quantitatively transformed into benzyl halides by hydrochlorination. In the presence of CuCl/pentamethyldiethylenetriamine, the in situ formed, multifunctional, polymeric atom transfer radical polymerization initiators carry out graft‐from polymerization through controlled radical polymerization. Some i‐PP‐based graft copolymers, including poly(propylene‐g‐methyl methacrylate) and poly(propylene‐g‐styrene), have been prepared with controlled compositions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 429–437, 2005     

Kinetic analysis of styrene atom transfer radical polymerization: Extraction of radical‐radical termination rate coefficients

Kinetic studies of the atom transfer radical polymerization (ATRP) of styrene are reported, with the particular aim of determining radical‐radical termination rate coefficients (<k_t>). The reactions are analyzed using the persistent radical effect (PRE) model. Using this model, average radical‐radical termination rate coefficients are evaluated. Under appropriate ATRP catalyst concentrations, <k_t> values of approximately 2 × 10⁸ L mol^?1 s^?1 at 110 °C in 50 vol % anisole were determined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5548–5558, 2004     

Living radical emulsion polymerization using the nanoprecipitation technique: An extension to atom transfer radical polymerization

Living radical polymerizations of styrene were performed under emulsion atom transfer radical polymerization conditions with latexes prepared by a nanoprecipitation technique recently developed for the stable free‐radical polymerization process. Latexes were prepared by the precipitation of a solution of low‐molecular‐weight polystyrene in acetone into a solution of a surfactant in water. The resulting particles were swollen with styrene and then heated. The effects of various surfactants and hydrophobic ligands, the reaction temperature, and the ligand/copper(I) bromide ratio were studied. The best results were obtained with the nonionic surfactant Brij 98 in combination with the hydrophobic ligand N,N‐bis(2‐pyridylmethyl)octadecylamine and a ligand/copper(I) bromide ratio of 1.5 at a reaction temperature of 85–90 °C. Under these conditions, latexes with good colloidal stability with average particle diameters of 200 nm were obtained. The molecular weight distributions of the polystyrenes were narrow, although the experimental molecular weights were slightly larger than the theoretical ones because not all the macroinitiator appeared to reinitiate. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4027–4038, 2006     

Synthesis of diblock copolymers by combining stable free radical polymerization and atom transfer radical polymerization

A stable nitroxyl radical functionalized with an initiating group for atom transfer radical polymerization (ATRP), 4‐(2‐bromo‐2‐methylpropionyloxy)‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy (Br‐TEMPO), was synthesized by the reaction of 4‐hydroxyl‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy with 2‐bromo‐2‐methylpropionyl bromide. Stable free radical polymerization of styrene was then carried out using a conventional thermal initiator, dibenzoyl peroxide, along with Br‐TEMPO. The obtained polystyrene had an active bromine atom for ATRP at the ω‐end of the chain and was used as the macroinitiator for ATRP of methyl acrylate and ethyl acrylate to prepare block copolymers. The molecular weights of the resulting block copolymers at different monomer conversions shifted to higher molecular weights and increased with monomer conversion. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2468–2475, 2006     

Kinetics of surface‐initiated atom transfer radical polymerization

Although atom transfer radical polymerization (ATRP) is often a controlled/living process, the growth rate of polymer films during surface‐initiated ATRP frequently decreases with time. This article investigates the mechanism behind the termination of film growth. Studies of methyl methacrylate and methyl acrylate polymerization with a Cu/tris[2‐(dimethylamino)ethyl]amine catalyst system show a constant but slow growth rate at low catalyst concentrations and rapid growth followed by early termination at higher catalyst concentrations. For a given polymerization time, there is, therefore, an optimum intermediate catalyst concentration for achieving maximum film thickness. Simulations of polymerization that consider activation, deactivation, and termination show trends similar to those of the experimental data, and the addition of Cu(II) to polymerization solutions results in a more constant rate of film growth by decreasing the concentration of radicals on the surface. Taken together, these studies suggest that at high concentrations of radicals, termination of polymerization by radical recombination limits film growth. Interestingly, stirring of polymerization solutions decreases film thickness in some cases, presumably because chain motion facilitates radical recombination. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 386–394, 2003     

Atom transfer radical polymerization of vinyl monomers in the presence of tetraethylthiuram disulfide

In situ ATRPs of MMA, St in the presence of TD catalyzed by FeCl₃/PPh₃ and CuBr₂/bpy have been studied, respectively. The results showed that the initiator Et₂NCS₂X (X = Cl or Br) and catalyst FeCl₂ or CuBr were formed in situ from the initiating components and the polymerization exhibited living radical polymerization characteristics. In the case of St polymerization with TD/CuBr/bpy initiating system, an inverse ATRP was observed.     

Superparamagnetic lysozyme surface-imprinted polymer prepared by atom transfer radical polymerization and its application for protein separation

Molecular imprinting as a promising and facile separation technique has received much attention because of their high selectivity for target molecules. In this study, the superparamagnetic lysozyme surface-imprinted polymer was prepared by a novel fabricating protocol, the grafting of the imprinted polymer on magnetic particles in aqueous media was done by atom transfer radical polymerization (ATRP), and the properties of the imprinted polymer were characterized in detail. Its high selective adsorption and recognition to lysozyme demonstrated the separation ability of the magnetic imprinted material to template molecule, and it has been used for quick and direct separation of lysozyme from the mixture of standard proteins and real egg white samples under an external magnetic field. Furthermore, the elution of lysozyme from the imprinted material was achieved by PEG/sulphate aqueous two-phase system, which caused lysozyme not only desorption from the imprinted materials but also redistribution in the top and bottom phase of aqueous two-phase system. The aqueous two-phase system exhibited some of the extraction and enrichment effect to desorbed lysozyme. Our results showed that ATRP is a promising method for the protein molecularly imprinted polymer preparation.     

Synthesis of hyperbranched degradable polymers by atom transfer radical (Co)polymerization of inimers with ester or disulfide groups

Degradable hyperbranched polymers with multiple alkyl halide chain ends were synthesized by the atom transfer radical polymerization of inimers containing ester (2‐(2′‐bromopropionyloxy)ethyl acrylate) or disulfide (2‐(2′‐bromoisobutyryloxy)ethyl 2′′‐methacryloyloxyethyl disulfide) groups. Both the homo‐ and copolymerizations (with styrene in the former case and methyl methacrylate in the latter) were studied. The hyperbranched polymers derived from the ester‐type inimer were hydrolytically degradable under basic conditions, whereas those derived from the disulfide‐containing inimer could be efficiently degraded in the presence of reducing agents such as tributylphosphine. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Synthesis and characterization of sulfonated block copolymers by atom transfer radical polymerization

Well‐defined sulfonated polystyrene and block copolymers with n‐butyl acrylate (nBA) were synthesized by CuBr catalyzed living radical polymerization. Neopentyl p‐styrene sulfonate (NSS) was polymerized with ethyl‐2‐bromopropionate initiator and CuBr catalyst with N,N,N′,N′‐pentamethylethyleneamine to give poly(NSS) (PNSS) with a narrow molecular weight distribution (MWD < 1.12). PNSS was then acidified by thermolysis resulting in a polystyrene backbone with 100% sulfonic acid groups. Random copolymers of NSS and styrene with various composition ratios were also synthesized by copolymerization of NSS and styrene with different feed ratios (MWD < 1.11). Well defined block copolymers with nBA were synthesized by sequential polymerization of NSS from a poly(n‐butyl acrylate) (PnBA) precursor using CuBr catalyzed living radical polymerization (MWD < 1.29). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5991–5998, 2008     

Polymer–silicate nanocomposites produced by in situ atom transfer radical polymerization

Polymer–silicate nanocomposites were synthesized with atom transfer radical polymerization (ATRP). An ATRP initiator, consisting of a quaternary ammonium salt moiety and a 2‐bromo‐2‐methyl propionate moiety, was intercalated into the interlayer spacings of the layered silicate. Subsequent ATRP of styrene, methyl methacrylate, or n‐butyl acrylate with Cu(I)X/N,N‐bis(2‐pyridiylmethyl) octadecylamine, Cu(I)X/N,N,N′,N′,N″‐pentamethyldiethylenetriamine, or Cu(I)X/1,1,4,7,10,10‐hexamethyltriethylenetetramine (X = Br or Cl) catalysts with the initiator‐modified silicate afforded homopolymers with predictable molecular weights and low polydispersities, both characteristics of living radical polymerization. The polystyrene nanocomposites contained both intercalated and exfoliated silicate structures, whereas the poly(methyl methacrylate) nanocomposites were significantly exfoliated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 916–924, 2004     

Controlling polymer structures by atom transfer radical polymerization and other controlled/living radical polymerizations

Fundamentals of controlled/living radical polymerization (CRP) and Atom Transfer Radical Polymerization (ATRP), relevant to the synthesis of controlled polymer structures are described. Macromolecular brushes with star like structure are used as an example to illustrate synthetic power of ATRP.     

New antibacterial cationic surfactants prepared by atom transfer radical polymerization

Efficient antibacterial surfactants have been prepared by the quaternization of the amino groups of poly(ethylene‐co‐butylene)‐b‐poly[2‐(dimethylamino)ethylmethacrylate] (PEB‐b‐PDMAEMA) diblock copolymers by octyl bromide. The diblock copolymers have been synthesized by ATRP of 2‐(dimethylamino)ethylmethacrylate (DMAEMA) initiated by an activated bromide‐end‐capped poly(ethylene‐co‐butylene). In the presence of CuBr, 1,4,7,10,10‐hexamethyl‐triethylenetetramine (HMTETA), and toluene at 50 °C, the initiation is slow in comparison with propagation. This situation has been improved by the substitution of CuCl for CuBr, all the other conditions being the same. Finally, the addition of an excess of CuCl₂ (deactivator) to the CuCl/HMTETA catalyst is very beneficial in making the agreement between the theoretical and experimental number‐average molecular weights excellent. The antibacterial activity of PEB‐b‐PDMAEMA quaternized by octyl bromide has been assessed against bacteria and is comparable to the activity of a commonly used disinfectant, that is, benzalkonium chloride. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1214‐1224, 2006     

Living radical graft polymerization of methyl methacrylate to polyethylene film with typical and reverse atom transfer radical polymerization

Nickel‐mediated atom transfer radical polymerization (ATRP) and iron‐mediated reverse ATRP were applied to the living radical graft polymerization of methyl methacrylate onto solid high‐density polyethylene (HDPE) films modified with 2,2,2‐tribromoethanol and benzophenone, respectively. The number‐average molecular weight (M_n) of the free poly(methyl methacrylate) (PMMA) produced simultaneously during grafting grew with the monomer conversion. The weight‐average molecular weight/number‐average molecular weight ratio (M_w/M_n) was small (<1.4), indicating a controlled polymerization. The grafting ratio showed a linear relation with M_n of the free PMMA for both reaction systems. With the same characteristics assumed for both free and graft PMMA, the grafting was controlled, and the increase in grafting ratio was ascribed to the growing chain length of the graft PMMA. In fact, M_n and M_w/M_n of the grafted PMMA chains cleaved from the polyethylene substrate were only slightly larger than those of the free PMMA chains, and this was confirmed in the system of nickel‐mediated ATRP. An appropriate period of UV preirradiation controlled the amount of initiation groups introduced to the HDPE film modified with benzophenone. The grafting ratio increased linearly with the preirradiation time. The graft polymerizations for both reaction systems proceeded in a controlled fashion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3350–3359, 2002     

Building up polymer architectures on graphene oxide sheet surfaces through sequential atom transfer radical polymerization

The reactivity between the active species of atom transfer radical addition and the unsaturated groups of graphene oxides (GOs) has been demonstrated in this work. The reaction and the sequential surface‐initiated atom transfer radical polymerization provide a convenient approach to anchor various polymer chains and to buildup various polymer architectures, such as linear polymer, V‐shape block polymer, multibonded polymer layer, and hierarchical brush‐on‐layer polymer, on GO sheet surfaces. The chemical structures and morphology of the polymer‐modified GOs have been characterized with Fourier transform infrared spectroscopy, Raman spectroscopy, X‐ray photoelectron spectroscopy, and atomic force microscopy. After organomodification, the GOs exhibit a good dispersion ability in organic solvent over 80 days, amphiphilic characteristics, and temperature‐responsive properties. Reduction of the GOs has been performed to result in graphene‐like materials showing certain extent of electron conductivities. An effective approach to synthesize GO/polymer hybrid materials possessing various polymer architectures and attractive properties has been developed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1588–1596     

End‐group modification of poly(butyl acrylate) prepared by atom transfer radical polymerization: Mechanistic study using gradient polymer elution chromatography

The introduction of a functional group into a poly(butyl acrylate) polymer prepared by copper‐mediated atom transfer radical polymerization and the characterization of the prepared polymer by gradient polymer elution chromatography are reported. The bromo end group of the initial polymer can be transformed into a different functional group with several functionalization reactions, including nucleophilic substitution and atom transfer radical addition (ATRA), in combination with comonomers, addition–fragmentation transfer agents, or stable radicals. Several new functionalization agents are reported, including ATRA using 1‐(3‐hydroxymethyl‐phenyl)‐pyrrole‐2,5‐dione and trimethyl{1‐[4‐(2‐trimethylsiloxyethoxy)]phenylethenyloxy}silane and nucleophilic substitution using 2‐mercapto ethanol. The rate constant of the functionalization reaction and the final functionality are determined with gradient polymer elution chromatography, a technique by which qualitative and quantitative information about the conversion can be obtained. Polymers with a functionality greater than 95% are reported. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2350–2359, 2002