Synthesis,optical, and electrochemical properties of novel copolymers on the basis of benzothiadiazole and electron‐rich arene units

Novel alternating conjugated copolymers ( P1–P6 ) consisting of an electron‐deficient benzothiadiazole and a variety of electron‐rich thiophene‐arene‐thiophene units were synthesized by palladium‐catalyzed polycondensations (Stille and Suzuki reactions), aiming at processable materials with a reduced optical band gap. The structures of P1–P6 were confirmed by ¹H NMR and ¹³C NMR, and their molecular weights were determined by size exclusion chromatography. In the Suzuki polycondensation, the role of the catalyst [Pd(PPh₃)₄ and Pd(OAc)₂] on the resulting molecular weight was investigated. Pd(OAc)₂ enhances the molecular weight of the polymers for both thiophene and phenylene bis‐boronic esters as compared with Pd(PPh₃)₄. The optical properties of the polymers were examined in solution and the solid state. The polymers with n‐octyl substituents ( P1 , P4 , P5 , and P6 ) on the thiophene rings possessed less‐planar structures as a result of torsional steric hindrance, and their absorption spectra appeared blueshifted as compared with their unsubstituted analogues ( P2 and P3 ). The electrochemical properties of the polymers were studied using cyclic voltammetry. Although the alkyl substitution affects the oxidation potential, only marginal differences in the reduction potentials were observed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2360–2372, 2002     

Synthesis and properties of poly(heteroaryleneethynylene)s consisting of electron‐accepting benzothiadiazole/quinoxaline units and electron‐donating alkyl thiophene units

Low‐band‐gap π‐conjugated polymers composed of π‐excessive thiophene and π‐deficient benzothiadiazole and quinoxaline units were prepared in high yields by a polycondensation method using palladium cross‐coupling reactions of alkylthiophene diacetylenes, 4,7‐dibromo‐2,1,3‐benzothiadiazole, and 5,8‐dibromo‐2,3‐dipyridine‐2‐ylquinoxaline. The copolymers were characterized by NMR, IR, UV, gel permeation chromatography, and elemental analysis. High‐molecular‐weight (weight‐average molecular weight up to 82,600 g/mol), thermostable, soluble, and film‐forming materials were obtained. The polymers were photoluminescent in chloroform and showed metallic luster in the solid state. The absorption and emission in solution and in the solid state of the polymers revealed that the polymers generated a π‐stacked structure in the solid state, and the polymer molecules in the film were ordered. Thin films of poly[3‐dodecylthiophen‐2,5‐diylethynylene‐(benzo[1,2,5]thiadiazole‐4,7‐diyl)ethynylene] ( P‐1 ), poly[3,4‐di dodecylthiophen‐2,5‐diylethynylene‐(benzo[1,2,5]thiadiazole‐4,7‐diyl)ethynylene] ( P‐2 ), poly[3‐dodecylthiophene‐2,5‐diylethynylene‐(2,3‐dipyridine‐2‐ylquinoxaline‐5,8‐diyl)ethynylene] ( P‐3 ), and poly[3,4‐didodecylthiophene‐2,5‐diylethynylene‐(2,3‐dipyridine‐2‐ylquinoxaline‐5,8‐diyl)‐ethynylene] ( P‐4 ) exhibited an optical band gap of ～1.85–2.08 eV. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of the polymers were determined from electrochemical measurements. In the absorption and emission spectra of these polymers in chloroform/methanol mixtures, all the polymers revealed solvatochromic effects, which were related to the formation of aggregates, as confirmed by temperature‐dependence absorption investigations. The absorption spectra of P‐2 and P‐4 at different temperatures also revealed significant effects of the structure on the molecular interactions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6445–6454, 2005     

Low‐band gap copolymers containing thienothiadiazole units: Synthesis,optical, and electrochemical properties

Novel low‐band gap alternating copolymers consisting of 9,9‐bis(2‐ethylhexyl)fluorene and 4,6‐di(2‐thienyl)thieno[3,4‐c][1,2,5]thiadiazole and its 3,3″‐dialkyl derivatives were synthesized by Suzuki copolymerization reaction, and their photophysical and electrochemical properties were studied. The copolymers possess small optical band gap 1.3–1.4 eV. The absorption covers the whole visible spectral region. The long‐wavelength absorption maxima in thin films located at approximately 750–785 nm are significantly red shifted compared with those in solution, indicating strong intermolecular interactions. The introduction of alkyl chains to the thiophene units increases the molecular weights of soluble fractions and solubility of the final copolymers, leading to the improved processability of thin films. Polymer solutions exhibited solvatochromism and thermochromism, which is strongly supported by the involvement of the alkyl chains. The copolymers exhibited ambipolar redox properties and reversible electrochromic behavior. The electronic properties are influenced only slightly by alkyl substituents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2743–2756, 2010     

Small band gap conjugated polymers based on thiophene–thienopyrazine copolymers

In this study, five small band gap thiophene ( TH )–thienopyrazine ( TP ) conjugated copolymers were synthesized by Stille‐coupling reaction. The polymer structures consisted of one to four thiophene rings with the TP of different side groups provided a systematical investigation on the structure–electronic property relationship. The absorption maxima of the polymer films decreased from 850 to 590 nm as the thiophene moieties increased from thiophene to quaterthiophene. The optical and electrochemical band gaps of the studied poly[2,3‐didodecyl‐5‐(thiophen‐2‐yl)thieno[3,4‐b]pyrazine] ( PTHTP‐C12 ) were 0.97 and 0.78 eV, respectively, indicating a significant intramolecular charge transfer. The theoretical geometry and electronic properties of the TH ‐ TP copolymers by the density functional theory at the B3LYP level and 6‐31G(d) basis set suggested that the bond length alternation enlarged with enhancing the thiophene content and resulted in the variation on the polymer band gap. The relatively small theoretical effective mass of poly( TH ‐alt‐ TP ) also indicated its potential applications for field transistor applications. Our study demonstrates the tunable electronic properties of small band gap copolymers by the thiophene content and the resulted geometry variation. Such polymers could be potentially used for near‐infrared electronic and optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5872–5883, 2007     

Low band gap copolymers consisting of porphyrins,thiophenes, and 2,1,3‐benzothiadiazole moieties for bulk heterojunction solar cells

Two novel low band gap conjugated copolymers containing porphyrins, thiophenes, and 2,1,3‐benzothiadiazole ( BTZ ) moieties were synthesized and applied in bulk heterojunction solar cells. The thermal, optical, electrochemical, and photovoltaic properties of the two copolymers were examined to investigate the effect of the introduction of BTZ moiety in the backbone of the porphyrin polymers. The copolymers exhibited good thermal stability and film‐forming ability. The absorption spectra indicated that the BTZ moiety has significant influence on the UV–visible region spectra of the copolymers: with increasing the molar amount of BTZ moieties in conjugated main chain, the absorption in the range of 450–700 nm is largely broadened and red‐shifted compared to the similar polymers without BTZ moiety, and the optical band gaps of copolymers were narrowed to ～1.50 eV. The photoluminescence spectra showed that there is effective charge transfer in the whole conjugated main chain. Cyclic voltammetry displayed that the band gaps were reduced effectively by the introduction of the BTZ moieties. The bulk heterojunction solar cells were fabricated based on the blend of the copolymers and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) in a 1:2 weight ratio. The maximum power conversion efficiency of 0.91% was obtained by using P2 as the electron donor under the illumination of AM 1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Blue electroluminescence from 3,6‐silafluorene‐based copolymers

Poly(3,6‐silafluorene) is a typical wide band‐gap conjugated polymer with ultraviolet light emission. The blue electroluminescence from the 3,6‐silafluorene‐based copolymers via intrachain energy transfer was reported in this study. The monomer containing vinylene, anthracene, and tri‐arylamine moieties incorporated into the poly(3,6‐silafluorene) backbone can form efficient deep‐blue emitting copolymers with EL efficiency of 1.1–1.9%. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3286–3295, 2009     

Light‐emitting copolymers based on fluorene and selenophene—Comparative studies with its sulfur analogue: Poly(fluorene‐co‐thiophene)

A series of soluble conjugated copolymers derived from 9,9‐dioctylfluorene (FO) and selenophene (SeH) was synthesized by a palladium‐catalyzed Suzuki coupling reaction with various feed ratios of SeH to FO less than or equal to 50%. The efficient energy transfer from fluorene segments to narrow band‐gap selenophene sites was observed. In comparison with the very well studied copolymer poly(fluorene‐co‐thiophene), poly(9,9‐dioctylfluorene‐co‐selenophene) (PFO‐SeH) shows redshifted photoluminescence (PL) and electroluminescence (EL) emission. PL spectra of the PFO‐SeH copolymers show a significant redshift along with increasing selenophene content in the copolymers and also with increasing polymer concentration in solution. PL quantum efficiency of the selenophene‐containing PFO copolymer is much lower than that of corresponding PFO‐thiophene (Th) copolymers. All these features of PFO‐SeH copolymers can be explained by the difference in aromaticity of selenophene and thiophene heterocycles and the heavy atom effect of Se in comparison with S‐atoms. The device fabricated with PFO‐SeH15 as the emissive layer exhibited high external quantum efficiency (0.51%) at a luminance of 1570 cd/m². Device performance is limited by electron injection and the strong quenching effect of Se atoms. Devices with PFO‐SeH copolymers blended into PFO homopolymers show significant improvement in device performance. External quantum efficiency as high as 1.7% can be obtained for PFO‐SeH30/PFO blend devices. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 823–836, 2005     

Low band gap copolymers based on thiophene and quinoxaline: Their electronic energy levels and photovoltaic application

Low band gap conjugated copolymers containing donor (thiophene)‐acceptor (quinoxaline, Qx ) were synthesized via Stille coupling polymerization. The resulting copolymers were characterized by ¹H NMR, element analysis, GPC, TGA, and DSC. UV‐vis spectra indicated that the increase in the content of quinoxaline units increased the interaction strengthen of the polymer main chains and caused a red‐shift in the optical absorbance. Cyclic voltammetry was used to estimate energy levels of the lowest unoccupied molecular orbit (LUMO) and the highest occupied molecular orbit (HOMO), and the band gap (E_g) of the copolymers. The basic electronic structures of the copolymers were also studied by density‐functional theory (DFT) calculations. Both the experimental and calculation results indicated an increase in the HOMO energy level with increasing the content of quinoxaline units, whereas the corresponding change in the LUMO energy level is much smaller. Polymer photovoltaic cells (PVCs) were fabricated with the structure of ITO/PEDOT:PSS (30 nm)/active layer (80 nm)/Ca (8 nm)/Al(140 nm). The results show that the introduction of a proper amount of electron‐acceptor groups in the polymer main chains induces an extension of the absorption spectra and improves the photovoltaic properties of the copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3399–3408, 2009     

Control of the conjugation length and solubility in electroluminescent polymers

A new type of cyclolinear polymer, poly(phenylene vinylene‐alt‐cyclotriphosphazene), was synthesized through Heck‐type coupling reactions to produce π‐conjugated macromolecules with excellent solubility and precise electronic control of the band‐gap energy. This synthesis method is capable of producing well‐defined alternating polymers. The method is highly adaptable and can be readily used for other chromophore systems. The resulting polymers were also capable of accommodating a wide variety of substituents on the cyclophosphazene rings with minimal effect on the electronic properties. The band gap and electron affinities of the polymer were varied through the manipulation of the π‐conjugated unit located between the insulating phosphazene rings. Each chromophore matched the intended conjugation length consistently throughout the macromolecules. The polymers were good film formers because of the chosen substituents on the phosphazene rings. The absorbance of the polymers indicated minimal spectral shift from the monomer absorbance. This suggested an effective insulation of each chromophore unit from its neighbors by the phosphazene rings. Solution photoluminescence efficiencies were found to be up to 44.1%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 69–76, 2006     

Self‐assembly of π‐conjugated bis(terpyridine) ligands with zinc(II) ions: New metallosupramolecular materials for optoelectronic applications

A series of main‐chain metallopolymers ( P1–P10 ) was prepared by the self‐assembly of rigid‐linear π‐conjugated bis(terpyridine) monomers ( 1–10 ) with Zn^II ions and was fully characterized. The polymerization was additionally confirmed by UV/vis titration experiments. A strong increase in viscosities (around 1.6 times) relative to those of the monomer solutions was found. The thermal stability of P1–P10 compared with that of 1–10 was enhanced as a result of the metallopolymerization. The electro‐optical properties of the materials were investigated in detail. Tuning of the electrochemical and photophysical properties was enabled; thus, bright purple to green photoluminescent (PL) emission (PL quantum yields of 0.12–0.81) for P1–P10 was observed in solution with the emission color strongly depending on the nature of the π‐conjugated bis(terpyridine) system. Thin homogeneous films of P6 were prepared by solution processing, that is, spin‐coating and inkjet‐printing, and exhibited intense yellow PL emission in the solid state. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4083–4098, 2009     

Toward low‐band gap dithienophosphole copolymers for an application in organic solar cells

Two functionalized dithieno[3,2‐b:2′,3′‐d]phospholes with solubilizing groups have been synthesized that allow for the generation of a series of π‐conjugated AB‐ and ABC‐copolymers. The polymers obtained show notable optoelectronic properties with red‐shifted absorption and emission in the orange to red section of the optical solar spectrum. Although combination of dithienophosphole units with fluorene building blocks gives access to processable polymers with band gaps between 2.2 and 2.3 eV in solution and 2.0 eV in the solid state, an ABC copolymer based on dithienophosphole, fluorene, and bis(thienyl)benzothiadiazole units was found to not only exhibit a suitable band gap for solar cell applications (solution: 2.0 eV; solid state: 1.7 eV) but also showed good solubility as well as good electron transfer properties in the presence of fullerene (C₆₀). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8179–8190, 2008     

Effects of substituted side‐chain position on donor–acceptor conjugated copolymers

The optical properties and electrical properties of a series of low‐band‐gap conjugated copolymers, in which alkyl side chains were substituted at various positions, were investigated using donor–acceptor conjugated copolymers consisting of a cyclopentadithiophene derivative and dithienyl‐benzothiadiazole. With substituted side chains, the intrinsic properties of the copolymers were significantly altered by perturbations of the intramolecular charge transfer. The absorption of poly[2, 6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3,4‐b′]dithiophene)‐alt‐4, 7‐bis(4‐octyl‐thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐ttOTBTOT ( P2 )], which assumed a tail–tail configuration, tended to blue shift relative to the absorption of poly[2,6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3,4‐b′]dithiophene)‐alt‐4,7‐bis (thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐TBTT ( P1 )]. The absorption of poly[2,6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3, 4‐b′]dithiophene)‐alt‐4,7‐bis(3‐octyl‐thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐hhOTBTOT ( P3 )], which assumed a head–head configuration, was blue shifted relative to that of P2 . The electrical transport properties of field‐effect transistors were sensitive to the side chain position. The field‐effect mobility in P2 (μ₂ = 1.8 × 10^?3 cm²/V s) was slightly lower than that in P1 (μ₁ = 4.9 × 10^?3 cm²/V s). However, the mobility of P3 was very low (μ₃ = 3.8 × 10^?6 cm²/V s). Photoexcitation spectroscopy showed that the charge generation efficiency (shown in transient absorption spectra) and polaron pair mobility in P1 and P2 were higher than in P3 , yielding P1 and P2 device performances that were better than the performance of devices based on P3 . © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Photoluminescent,liquid‐crystalline,and electrochemical properties of para‐phenylene‐based alternating conjugated copolymers

Novel liquid‐crystalline alternating conjugated copolymers [ P(P(6)CN‐alt‐Cz) and P(P(6)CN‐alt‐MeP) ] with phenylene and carbazolylene or phenylene with methyl substitution onto the main chain have been synthesized through palladium‐catalyzed Suzuki coupling reactions. The influence of the incorporation of carbazolylene and the substituted phenylene into the main chain on the thermal, mesomorphic, and luminescent properties has been investigated by Fourier transform infrared spectroscopy, thermogravimetry, differential scanning calorimetry, polarized optical microscopy, ultraviolet–visible spectroscopy, photoluminescence (PL), and cyclic voltammetry. These polymers show highly thermal stability, losing little of their weights when heated to 360 °C. The conjugated copolymers exhibit liquid crystallinity at elevated temperature. The existence of the chromophoric terphenyl core endows the copolymers with high PL and the polymer P(P(6)CN‐alt‐Cz containing carbazolylene unit can emit more pure blue light. All the copolymer films with low band gaps about 2.3–2.4 eV undergo reversible oxidation and reduction processes, significantly lower than the band gap of poly(p‐phenylene). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 434–442, 2010     

Bandgap engineering of indenofluorene‐based conjugated copolymers with pendant donor‐π‐acceptor chromophores for photovoltaic applications

Three narrow‐band‐gap conjugated copolymers based on indenofluorene and triphenylamine with pendant donor‐π‐acceptor chromophores were successfully synthesized by post‐functionalization approach. All the polymers have good solubility in common solvents and excellent thermal stability. The photophysical properties, energy levels and band gaps of the polymers were well manipulated by introducing different acceptor groups onto the end of their conjugated side chains. By using different acceptor groups, the band gaps of the polymers were narrowed from 1.86 to 1.53 eV by lowering their lowest unoccupied molecular orbital levels, whereas their relatively deep highest occupied molecular orbital levels of approximately ?5.35 eV were maintained. Bulk‐heterojunction solar cells with these polymers as electron donors and (6,6)‐phenyl‐C₇₁‐butyric acid methyl ester as acceptor showed power conversion efficiencies as high as 3.1% and high open circuit voltages more than 0.88 eV. The relationships between the performance and film morphology, energy levels, charge mobilities were discussed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of π‐conjugated polymer containing both thiophene and phosphole sulfide in the main chain by simultaneous post‐element transformation of organotitanium polymer

The synthesis and unique optoelectronic features of a π‐conjugated polymer containing both thiophene and 1‐phenylphosphole sulfide units (multiple heteroles) in the main chain by the post‐element transformation of a regioregular organometallic polymer possessing titanacyclopentadiene‐2,5‐diyl unit are described. The π‐conjugated polymer containing multiple heteroles was obtained in 73% yield by the simultaneous reaction of the organotitanium polymer with sulfur monochloride and dichlorophenylphosphine (0.6 equiv each), whose number‐average molecular weight (M_n) and the molecular‐weight distribution (M_w/M_n) were estimated to be 11,000 and 3.4, respectively, by the size exclusion chromatography (SEC). The π‐conjugated polymer thus obtained was found to have the high HOMO and the low LUMO energy levels due to the electron‐rich thiophene and electron‐deficient phosphole sulfide units, respectively, as supported by its cyclic voltammetry (CV) analysis. Compared to a mixture of a polymer containing sole thiophene‐unit and that containing sole phosphole sulfide units, the π‐conjugated polymer‐containing multiple heteroles proved to exhibit interesting optical properties. For example, a specific emission peak was observed at 608 nm in the photoluminescence spectrum, which was not observed in the case of the thiophene‐containing polymer, the phosphole‐containing polymer, and their mixture. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2519–2525     

Control of molecular aggregation in symmetrically substituted π‐conjugated bulky poly(p‐phenylenevinylene)s and their copolymers

A new series of symmetrically substituted bulky PPV‐copolymers based on poly(bis‐2,5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene) ( BEH‐PPV ) bearing tricyclodecane (TCD) pendants were synthesized to study the effect of chain aggregation in the π‐conjugated polymer backbone. The composition of the copolymers was varied up to 100 mol % and the structures of the copolymer were confirmed by NMR and FTIR. The molecular weights of the copolymers were obtained as M_w = 11,500–1,78,800 depending on the TCD‐incorporation in BEH‐PPV. The origin of the π‐aggregation was investigated using mixture of solvents (polar or nonpolar) or temperature as external stimuli. Absorption, photoluminescence, and time‐resolved fluorescence decay techniques were employed as tools to trace molecular aggregation in solution and solid state. The TCD‐substituted bulky copolymers showed almost twice the enhancement in photoluminescence compared with that of BEH‐PPV . Solvent‐induced aggregation studies of copolymers revealed the existence of strong molecular aggregation in BEH‐PPV compared with that of bulky copolymers. Variable temperature studies further evidence for the reversibility of molecular aggregation on heating/cooling cycles and showed isosbetic points with respect to free and aggregated polymer chains. Time‐resolved fluorescent studies confirmed the existence of free and aggregated π‐conjugated species with a life time of 0.1 to 1.0 ns. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2631–2646, 2009     

Synthesis and optical properties of light‐emitting π‐conjugated polymers containing biphenyl and dithienosilole

Copolymers containing oligo(phenylene vinylene) (2.5), fluorene, and 4,4‐dihexyldithienosilole (DTS) units were synthesized and characterized. The π‐conjugated monomers were joined with the palladium(0)‐catalyzed Suzuki–Miyaura coupling reaction, thus forming either biphenyl– or phenyl–thiophene linkages. These polymers were photoluminescent, with the fluorescent quantum efficiency between 54 and 63% and with λ_max for fluorescence at ～448 nm in tetrahydrofuran. The presence of 5% DTS in the copolymers had little influence on the optical absorption and emission wavelengths. Double‐layer light‐emitting‐diode devices using these polymers as emissive layers had low turn‐on voltages (3.5–4 V) and moderate external quantum efficiencies (0.14–0.30%). The results show that DTS plays a positive role in improving the charge‐injection characteristics of poly(phenylene vinylene) materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2048–2058     

Poly(3‐hexyl thiophene)‐b‐poly(N‐isopropyl acrylamide): Synthesis and its composition dependent structural,solubility, thermoresponsive,electrochemical, and electronic properties

Conjugated block copolymers consisting of poly(3‐hexyl thiophene) (P3HT) and a thermoresponsive polymer poly(N‐isopropyl acrylamide) (PNIPAM) with varying composition have been synthesized by facile click reaction between alkyne terminated P3HT and azide terminated PNIPAM. The composition‐dependent solubility, thermoresponsive property in water, phase behavior, electrochemical, optical, and electronic properties of the block copolymers were systematically investigated. The block copolymers with higher volume fraction of PNIPAM form thermoresponsive spherical micelles with P3HT‐rich crystalline cores and PNIPAM coronas. Both X‐ray and atomic force microscopic studies indicated that the blocks copolymers showed well‐defined microphase separated nanostructures and the structure depended on the composition of the blocks. The electrochemical study of the block copolymers clearly demonstrated that the extent of charge transport through the block copolymer thin film was similar to P3HT homopolymer without any significant change in the band gap. The block copolymers showed improved or similar charge carrier mobility compared with the pure P3HT depending on the composition of the block copolymer. These P3HT‐b‐PNIPAM copolymers were interesting for fabrication of optoelectronic devices capable of thermal and moisture sensing as well as for studying the thermoresponsive colloidal structures of semiconductor amphiphilic systems. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1785–1794     

Direct arylation polymerization toward ultra‐low bandgap poly(thienoisoindigo‐alt‐diketopyrrolepyrrole) conjugated polymers: The effect of β‐protection on the polymerization and properties of the polymers

Direct arylation polymerization between derivatives of dibromodiketopyrrolopyrrole (DPP) and thienoisoindigo (TIIG) resulted in two π‐conjugated copolymers with average molecular weights up to 24.0 kDa and bandgaps as low as 0.8 eV. The structural analysis of the obtained two polymers revealed well‐defined alternating conjugation backbones without obvious structural defects. The introduction of hexyl‐group in the β‐position of thiophene rings in the DPP units not only reduces the bandgap of conjugated polymer compared to a similar polymer containing bare‐thiophene flanked DPP but also affects polymer morphology in thin films. P‐type charge‐transport characteristics were observed for two polymers in organic field‐effect transistors with comparable hole mobilities. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3205–3213     

Synthesis and characterization of thieno[3,2‐b]thiophene‐isoindigo‐based copolymers as electron donor and hole transport materials for bulk‐heterojunction polymer solar cells

A novel class of thieno[3,2‐b]thiophene (TT) and isoindigo based copolymers were synthesized and evaluated as electron donor and hole transport materials in bulk‐heterojunction polymer solar cells (BHJ PSCs). These π‐conjugated donor‐acceptor polymers were derived from fused TT and isoindigo structures bridged by thiophene units. The band‐gaps and the highest occupied molecular orbital (HOMO) levels of the polymers were tuned using different conjugating lengths of thiophene units on the main chains, providing band‐gaps from 1.55 to 1.91 eV and HOMO levels from ?5.34 to ?5.71 eV, respectively. The corresponding lowest unoccupied molecular orbital (LUMO) levels were appropriately adjusted with the isoindigo units. Conventional BHJ PSCs (ITO/PEDOT:PSS/active layer/interlayer/Al) with an active layer composed of the polymer and PC₇₁BM were fabricated for evaluation. Power conversion efficiency from a low of 1.25% to a high of 4.69% were achieved with the best performing device provided by the D?π?A polymer with a relatively board absorption spectrum, high absorption coefficient, and more uniform blend morphology. These results demonstrate the potential of this class of thieno[3,2‐b]thiophene‐isoindigo‐based polymers as efficient electron donor and hole transport polymers for BHJ PSCs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013