Synthesis and photopolymerization of novel multifunctional vinyl esters

Novel mono‐ and multifunctional vinyl ester monomers containing thioether groups were synthesized via an amine‐catalyzed Michael addition reaction between vinyl acrylate and multifunctional thiols. Using photo‐differential scanning calorimetry and real‐time Fourier transform infrared (RTIR) spectroscopy, the polymerization kinetics and oxygen inhibition of the homopolymerizations of the vinyl ester monomers were investigated. The effect of the vinyl ester and thioether group on acrylate/vinyl ester and thiol/vinyl ester copolymerizations was determined using real‐time IR spectroscopy to monitor polymerization rates of acrylate, vinyl, and thiol groups simultaneously. Polymerization of the vinyl esters used was found to be relatively insensitive to oxygen inhibition. We propose that the thioether group is responsible for reducing oxygen inhibition by a series of chain transfer/oxygen‐scavenging reactions. In polymerization of a acrylate/vinyl ester mixture both in nitrogen and in air, the vinyl ester monomer significantly enhances the polymerization rates and the conversion of the acrylate double bonds via plasticization of the crosslinked matrix and reduction of inhibition by oxygen. Ultimately, the vinyl ester monomer is incorporated into the polymer network. Thiol/vinyl ester free‐radical copolymerization is much faster than either thiol/allylether copolymerization or vinyl ester homopolymerization. The electron‐rich vinyl ester double bonds ensure rapid copolymerization with thiol. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4424–4436, 2004     

The influence of N‐vinyl pyrrolidone on polymerization kinetics and thermo‐mechanical properties of crosslinked acrylate polymers

Polymerization of multifunctional acrylate monomers generates crosslinked polymers that are noted for their mechanical strength, thermal stability, and chemical resistance. A common reactive diluent to photopolymerizable formulations is N‐vinyl pyrrolidone (NVP), which is known to reduce the inhibition of free radical photopolymerization by atmospheric oxygen. In this work, the copolymerization behavior of NVP was examined in acrylate monomers with two to five functional groups. At concentrations as low as 2 wt %, NVP increases the polymerization rate in copolymerization with multifunctional acrylate monomer. The relative rate enhancement associated with adding NVP increases dramatically as the number of acrylate double bonds changes from two to five. The influence of NVP on polymerization kinetics is related to synergistic cross‐propagation between NVP and acrylate monomer, which becomes increasingly favorable with diffusion limitations. This synergy extends bimolecular termination into higher double bond conversion through reaction diffusion controlled termination. Copolymerizing concentrations of 5–30 DB% NVP with diacrylate or pentaacrylate monomer also increases Young's modulus and the glass transition temperature (T_g) in comparison to neat acrylate polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4062–4073, 2007     

Synthesis of di‐ and tri‐tertiary amine containing methacrylic monomers and their (co)polymerization via RAFT

The synthesis, reversible addition‐fragmentation chain transfer (RAFT) (co)polymerization, and aqueous phase behavior of three methacrylic monomers containing two or three pendent tertiary amine functional groups are described. Homopolymerizations were conducted with 1‐methyl‐1‐cyanoethyl dithiobenzoate (CPDB) under bulk conditions following standard RAFT procedures. All three monomers, 1,3‐bis(dimethylamino)propan‐2‐yl methacrylate ( M1 ), 1‐(bis(3‐(dimethylamino)propyl) amino)propan‐2‐yl methacrylate ( M2 ), and 2‐((2‐(2‐(dimethylamino)ethoxy)ethyl) methylamino)ethyl acrylate ( M3 ), polymerized in a controlled manner as evidenced by the kinetic and molecular weight profiles. Homopolymerizations conducted at a lower ratio of CPDB:AIBN proceeded faster than those at a higher ratio. Subsequently, the facile copolymerization behavior of M1 and M3 was demonstrated via the synthesis of a range of statistical copolymers with hexyl and lauryl methacrylate comonomers containing 10–90 mol % hydrophobic comonomer. Finally, the aqueous‐solution characteristics of the M1 – M3 homopolymers were briefly examined. All three homopolymers were shown to undergo phase transitions in aqueous media in response to changes in both temperature and pH. Specifically, 1 wt % solutions of poly M1 were shown to possess an LCST of ～22 °C, that of poly M2 at ～33 °C, and for poly M3 the observed cloud point was ～63 °C. Additionally, all homopolymers became hydrophobic and phase separated at high solution pH. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1877–1890, 2009     

4,4′-二(硬脂酰胺基)二苯甲烷在乙烯基类单体中的分子组装及其结构形态研究

4,4′-二(硬脂酰胺基)二苯甲烷(BSDM)能在乙烯基类单体中进行聚集、自组装,并可使苯乙烯、丙烯酸丁酯、甲基丙烯酸甲酯、甲基丙烯酸-2-羟基乙酯等凝胶化,形成相应的分子凝胶.凝胶/溶胶相变温度(TGS)与BSDM浓度有关,BSDM质量分数越大,凝胶体系中分子间氢键和π-π键越多,要破坏它们所需要的能量越高,TGS因而也就越高.透射电镜表明,BSDM在各种可聚合溶剂中通过分子间相互作用形成类似纤维状的聚集体结构.BSDM在可聚合溶剂聚合前后的偏光显微照片表明,BSDM在体系中的晶型结构是球晶.     

Photoinitiating monomers based on di‐ and triacryloylated hydroxylamine derivatives

The purpose of our study was to design a new class of acrylate‐based monomers with an UV‐cleavable heteroatom bond, offering the possibility to initiate radical polymerization upon irradiation with UV‐light. A method to derive the double bond conversion from the ATR‐IR spectra of the monomers and the cured polymers was employed, that enabled us to calculate the theoretical polymerization heats of the new monomers. Their photopolymerization properties were determined by Photo Differential Scanning Calorimetry. Surprisingly, some of these new compounds exhibited high photoinitiation activity, comparable to well‐established Type II photoinitiator systems like benzophenone/triethanolamine. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 392–403, 2009     

Synthesis and polymerization of phosphorus‐containing acrylates

Novel phosphorus‐containing acrylate monomers were synthesized by two different routes. The first involved the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with diethylphosphonoacetic acid. The monomers were bulk‐ and solution‐polymerized at 56–64 °C with 2,2′‐azobisisobutyronitrile. The ethyl ester monomer showed a high crosslinking tendency under these conditions. The selective hydrolysis of the ethyl ester phosphonic ester compound was carried out with trimethylsilyl bromide, producing a phosphonic acid monomer. In the second route, ethyl α‐hydroxymethyl acrylate and t‐butyl α‐hydroxymethyl acrylate were reacted with diethylchlorophosphate. The bulk homopolymerization and copolymerization of these monomers with methyl methacrylate and 2,2′‐azobisisobutyronitrile gave soluble polymers. The attempted hydrolysis of the monomers was unsuccessful because of the loss of the diethylphosphate group. The relative reactivities of the monomers in the photopolymerizations were also compared. The ethyl α‐hydroxymethyl acrylate/diethylphosphonic acid monomer showed higher reactivity than the other monomers, which may explain the crosslinking during the polymerization of this monomer. The reactivities of other derivatives were similar, but the rates of polymerization were slow in comparison with those of methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3221–3231, 2002     

Systematic Investigation of the Photopolymerization of Imidazolium-Based Ionic Liquid Styrene and Vinyl Monomers

The use of ionic liquids (ILs) as media in radical polymerizations has demonstrated the ability of these unique solvents to improve both reaction kinetics and polymer product properties. However, the bulk of these studies have examined the polymerization behavior of common organic monomers (e.g., methyl methacrylate, styrene) dissolved in conventional ILs. There is increasing interest in polymerized ILs (poly(ILs)), which are ionomers produced from the direct polymerization of styrene-, vinyl-, and acrylate-functionalized ILs. Here, the photopolymerization kinetics of IL monomers are investigated for systems in which styrene or vinyl functionalities are pendant from the imidazolium cation. Styrene-functionalized IL monomers typically polymerized rapidly (full conversion ≤1 min) in both neat compositions or when diluted with a nonpolymerizable IL, [C₂mim][Tf₂N]. However, monomer conversion in vinyl-functionalized IL monomers is much more dependent on the nature of the nonpolymerizable group. ATR-FTIR analysis and molecular simulations of these monomers and monomer mixtures identified the presence of multiple intermolecular interactions (e.g., π–π stacking, IL aggregation) that contribute to the polymerization behaviors of these systems. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2364–2375     

Polymerization of methyl methacrylate by the binary system of the copper–amine complex type resin and carbon tetrachloride

The polymerization of vinyl monomers initiated by binary initiator systems composed of a copper–amine complex type resin and organic halides has been studied. These binary systems initiated the polymerization of various vinyl monomers. A kinetic study of the polymerization of methyl methacrylate initiated by the copper–amine complex resin–CCl₄ system was carried out, and it was found that the polymerization proceeds by way of a radical mechanism. This fact was also supported by the copolymerization of methyl methacrylate with styrene. The overall activation energy of the polymerization of methyl methacrylate was estimated as 8.4 kcal/mole. The activity of the initiator systems was greatly dependent upon the dissociation energy of carbon–halogen bonds in the organic halides. A possible initiation mechanism with the binary systems is proposed and discussed.     

Vinyl esters: Low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturing

Lithography based additive manufacturing technologies (AMT) like stereolithography or digital light processing have become appealing methods for the fabrication of 3D cellular scaffolds for tissue engineering and regenerative medicine. To circumvent the use of (meth)acrylate‐based photopolymers, that suffer from skin irritation and sometimes cytotoxicity, new monomers based on vinyl esters were prepared. In vitro cytotoxicity studies with osteoblast‐like cells proofed that monomers based on vinyl esters are significantly less cytotoxic than (meth)acrylates. Photoreactivity was followed by photo‐differential scanning calorimetry and the mechanical properties of the photocured materials were screened by nanoindentation. Conversion rates and indentation moduli between those of acrylate and methacrylate references could be observed. Furthermore, osteoblast‐like cells were successfully seeded onto polymer specimens. Finally, we were able to print a 3D test structure out of a vinyl ester‐based formulation by μ‐SLA with a layer thickness of 50 μm. For in vivo testing of vinyl esters these 3D scaffolds were implanted into surgical defects of the distal femoral bone of adult New Zealand white rabbits. The obtained histological results approved the excellent biocompatibility of vinyl esters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Recent developments in photoinitiated radical polymerization

This article presents the progress made in the development of high-speed photocurable resins and reports the performance of some novel radical-type photoinitiators, acrylate monomers and telechelic oligomers. The polymerization kinetics has been studied by real-time infrared spectroscopy, which records conversion versus time curves for reactions occurring in a fraction of a second. Phosphine oxides are among the most efficient photoinitiators and proved to be particularly well suited for the photocuring of pigmented systems and for solar-assisted polymerization. Acrylate monomers containing a heterocyclic oxygen in their structural unit exhibit an unexpectedly high reactivity. The introduction of an amino group in the chain of a telechelic acrylate-polyester causes a substantial acceleration of the polymerization process. In both cases, the increase in reactivity was attributed to the presence of labile hydrogen atoms which favor chain transfer reactions. The copolymerization of donor-acceptor monomer systems, like vinyl ether-maleate or vinyl ether maleimide, was shown to proceed readily upon UV irradiation, even in the absence of added photoinitiator. Light-induced polymerization was also used to crosslink rapidly polymers functionalized with acrylate or vinyl double bonds, namely acrylated polyisoprene and a styrene-butadiene block copolymer. The addition in small amounts (1 wt%) of a trifunctional thiol was found to speed up drastically the crosslinking polymerization, causing insolubilization of the thermoplastic elastomer to occur after a 0.1 s exposure.     

Are o‐nitrobenzyl (meth)acrylate monomers polymerizable by controlled‐radical polymerization?

We report on the controlled‐radical polymerization of the photocleavable o‐nitrobenzyl methacrylate (NBMA) and o‐nitrobenzyl acrylate (NBA) monomers. Atom transfer radical polymerization (ATRP), reversible addition‐fragmentation chain transfer polymerization (RAFT), and nitroxide‐mediated polymerization (NMP) have been evaluated. For all methods used, the acrylate‐type monomer does not polymerize, or polymerizes very slowly in a noncontrolled manner. The methacrylate‐type monomer can be polymerized by RAFT with some degree of control (PDI ∼ 1.5) but leading to molar masses up to 11,000 g/mol only. ATRP proved to be the best method since a controlled‐polymerization was achieved when conversions are limited to 30%. In this case, polymers with molar masses up to 17,000 g/mol and polydispersity index as low as 1.13 have been obtained. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6504–6513, 2009     

Photoinitiated polymerization of methacrylic monomers in a polybutadiene matrix (PB): Kinetic,mechanistic, and structural aspects

The kinetics and mechanism of the photoinitiated polymerization of tetrafunctional and difunctional methacrylic monomers [1,6‐hexanediol dimethacylate (HDDMA) and 2‐ethylhexyl methacrylate (EHMA)] in a polybutadiene matrix (PB) have been studied. The maximum double‐bond conversion, the maximum polymerization rate, the intrinsic reactivity, and the kinetic constants for propagation and termination have been calculated. Unlike the behavior followed by the SBS‐HDDMA and PS‐HDDMA systems, where a reaction‐diffusion mechanism occurs from the start of the polymerization at low monomer concentrations (<30–40%), in the PB‐HDDMA system the reaction diffusion controls the termination process only after approximately 10% conversion is reached, as for the bulk polymerization of polyfunctional methacrylic monomers. Before reaching 10% conversion the behavior observed can be better explained by a combination of segmental diffusion‐controlled (autoaccelerated) and reaction‐diffusion mechanisms. This is probably a consequence of the lower force of attraction between the monomer and the matrix and between the growing macroradical and the matrix than those corresponding to the other systems mentioned. For the PB‐EHMA system, the termination mechanism is principally diffusion‐controlled from the beginning of the polymerization for monomer concentrations below 30–40%, and for higher monomer concentrations, a standard termination mechanism takes place (k_t ≈ 10⁶) at low double‐bond conversions, which is diffusion‐controlled for high conversions (>40%). For PB‐HDDMA and PB‐EHMA systems, crosslinked polymerized products are obtained as a result of the participation of the double bonds of the matrix in the polymerization process. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2444–2453, 2001     

Synthesis and photopolymerizations of new phosphonated monomers for dental applications

Three novel phosphonated methacrylate monomers have been synthesized and studied for use in dental applications. Two of the monomers were synthesized from the reactions of glycidyl methacrylate (GMA) with (diethoxy‐phosphoryl)‐acetic acid (monomer 1 ) and (2‐hydroxy‐ethyl)‐phosphonic acid dimethyl ester (monomer 2 ). These monomers showed high crosslinking tendencies during thermal bulk and solution polymerizations. The third monomer (monomer 3 ) was prepared by the reaction of bisphenol A diglycidylether (DER) with (diethoxy‐phosphoryl)‐acetic acid and subsequent conversion of the resulting diol to the methacrylate with methacryloyl chloride. The homopolymerization and copolymerization behaviors of the synthesized monomers were also investigated with glycerol dimethacrylate (GDMA), triethylene glycol dimethacrylate (TEGDMA), and 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (bis‐GMA) using photodifferential scanning calorimetry at 40 °C using 2,2′‐dimethoxy‐2‐phenyl acetophenone (DMPA) as photoinitiator. Monomer 1 showed polymerization rate similar or greater than dimethacrylates studied here but with higher conversion. The maximum rate of polymerizations decreased in the following order: 1 ～TEGDMA>GDMA～bis‐GMA～ 3 > 2 . A synergistic effect in the rate of polymerization was observed during copolymerizations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2290–2299, 2008     

Side‐chain ferrocene‐containing (meth)acrylate polymers: Synthesis and properties

A comprehensive investigation on the synthesis and properties of a series of ferrocene‐containing (meth)acrylate monomers and their polymers that differ in the linkers between the ferrocene unit and the backbone was carried out. The side‐chain ferrocene‐containing polymers were prepared via atom transfer radical polymerization. The kinetic studies indicated that polymerization of most monomers followed a “controlled”/living manner. The polymerization rates were affected by the vinyl monomer structures and decreased with an increase of the linker length. Methacrylate polymerization was much faster than acrylate polymerization. The optical absorption of monomers and polymers was affected by the linkers. Thermal properties of these polymers can be tuned by controlling the length of the linker between the ferrocene unit and the backbone. By increasing the length of the linker, the glass transition temperature ranged from over 100 to ?20 °C. Electrochemical properties of both monomers and polymers were characterized. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Controlled grafting of cellulose esters using SET‐LRP process

Here, we present the first example of application of single‐electron transfer living radical polymerization (SET‐LRP) process to a controlled grafting of cellulose esters, cellulose diacetate (CDA), and cellulose acetate butyrate (CAB). The cellulose ester macroinitiators with various functionality densities have been prepared by acylation of the backbones with 2‐bromoisobutyryl (BrIB) and dichloroacetyl (DCA) groups, respectively. Methacrylate monomers were polymerized using DCA‐functionalized macroinitiators in the presence of pentamethyldiethylene triamine as a ligand. At 30 °C, the reaction is rather slow, reaching about 10% conversion after 3 to 6 h of polymerization, whereas the higher temperature (60 °C) perceptibly speeds up the polymerization so that methyl methacrylate (MMA) conversion is ～30% after 5 h. Graft copolymers with random‐type and diblock‐type grafts having amphiphilic character were also synthesized. For acrylate grafting (BuA and t‐BuA), BrIB‐functionalized macroinitiators are more convenient in a combination with a low concentration of Cu(0) and Me₆TREN as a ligand and polymerization is detectably faster even at the lower temperature than that of MMA. Kinetic studies show “living” character of both the graftings. Important advantages of SET‐LRP, compared with classic ATRP, are (i) higher polymerization rate, (ii) lower extent of recombination of the growing grafts and (iii) negligible coloration of the products with catalytic residua, so that the prepared polymers do not require additional careful purification. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Photopolymerization of the N,N-dialkylaminoethyl methacrylate-benzophenone system

In order to search for photoradical polymerization systems that are not subject to oxygen inhibition, photoradical polymerization of the N,N-dialkylaminoethyl methacrylate—aryl ketone system has been studied. It was found that photoradical polymerization of this system, where N,N-dialkylaminoethyl methacrylate functions both as a co-initiator and as a monomer, is accelerated in the presence of oxygen. The polymerization rate was faster with N,N-diethylaminoethyl methacrylate than with the N,N-dimethyl analogue. Crosslinking occurred rapidly in the presence of a multifunctional acrylate monomer, resulting in the formation of gels. As compared with photopolymerizations of acrylate monomers using non-polymerizable, low-molecular-weight alkylamine-aryl ketone combinations as photo-initiators, the present system has an advantage that less low-molecular-weight amine remains in the exposed area because it polymerizes.     

Influence of the secondary functionality on the radical‐vinyl chemistry of highly reactive monoacrylates

The impact of secondary functionalities on the radical‐vinyl chemistry of monoacrylates characterized by secondary functionalities that dramatically enhance their polymerization rate was elucidated utilizing experimental and computational techniques. Firstly, bulk interactions affecting the acrylate reactivity towards photopolymerization were removed by polymerizing at 5 wt % monomer in 1,4‐dioxane. Following deconvolution of bulk interactions impacting reactivity towards photopolymerization, a linear correlation between average polymerization rates and Michael addition reaction rate constants was observed on a logarithmic scale. This result indicates that the presence of the secondary functionality intramolecularly alters the monomer chemistry in a manner which impacts both of these distinct reaction types in a similar manner. These monomers exhibited reduced activation energies in both Michael addition and photopolymerization reactions as compared to hexyl acrylate. Reduction up to 20 ± 8 kJ mole^?1was observed for Michael addition reactions and 12 ± 1 kJ mole^?1 for photopolymerization reactions, thereby explaining the higher reactivity of the acrylates characterized by the secondary functionalities. Cyclic voltammetry experiments conducted to investigate the nature of the acrylic double bonds indicated that the rapidly polymerizing acrylates are more readily reduced as compared to traditional acrylates. Further, a distinct monotonic correlation of the irreversible cathodic peak potentials of the (meth)acrylates to photopolymerization and Michael addition reactivity was observed. The computationally estimated acrylic LUMO energies characterized by the secondary functionalities (?2.3 eV to ?2.7 eV) were also found to be lower relative to hexyl acrylate (?2.2 eV). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4859–4870, 2009     

丙烯酸三苯甲酯及其衍生物的不对称聚合反应

含有大位阻基团的1,1-双取代α,β-不饱和酯,诸如甲基丙烯酸三苯甲酯(TrMA)、甲基丙烯酸邻甲苯基二苯基甲酯(DPIMA),在不对称聚合反应中,能够形成具有单手螺旋构象的旋光性聚合物。这类聚合物因具有独特的手性识别能力而一直为人们所瞩目。现有的研究结果表明,在这类单体的不对称聚合反应中,手性配体如鹰爪豆碱[(—)-Sp]决定着聚合产物     

Postfunctionalization of polyoxanorbornene via sequential Michael addition and radical thiol‐ene click reactions

We demonstrated the successful postfunctionalization of poly(oxanorbornene imide) (PONB) with two types of double bonds using sequential orthogonal reactions, nucleophilic thiol‐ene coupling via Michael addition and radical thiol‐ene click reactions. First, the synthesis of PONB with side chain acrylate groups is carried out via ring‐opening metathesis polymerization and nitroxide radical coupling reaction, respectively. Subsequently, the resulting polymer having two different orthogonal functionalities, main chain vinyl and side chain acrylate, is selectively modified via two sequential thiol‐ene click reactions, nucleophilic thiol‐ene coupling via Michael addition and photoinduced radical thiol‐ene. The orthogonal reactivity of two diverse double bonds, vinyl and acrylate functionalities, for the abovementioned consecutive thiol‐ene click reactions was first demonstrated on the model compound. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

PPEGMEA‐g‐PDEAEMA: Double hydrophilic double‐grafted copolymer stimuli‐responsive to both pH and salinity

A series of well‐defined double hydrophilic double‐grafted copolymers, consisting of polyacrylate backbone, hydrophilic poly(2‐(diethylamino)ethyl methacrylate) and poly(ethylene glycol) side chains, were synthesized by successive atom transfer radical polymerization. The backbone, poly[poly(ethylene glycol) methyl ether acrylate] (PPEGMEA) comb copolymer, was firstly prepared by ATRP of PEGMEA macromonomer via the grafting‐through route followed by reacting with lithium diisopropylamide and 2‐bromopropionyl chloride to give PPEGMEA‐Br macroinitiator of ATRP. Finally, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(2‐(diethylamino)ethyl methacrylate) graft copolymers were synthesized by ATRP of 2‐(diethylamino)ethyl methacrylate using PPEGMEA‐Br macroinitiator via the grafting‐from route. Poly(2‐(diethylamino)ethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections, which is tolerant of both acidic and basic environment. The molecular weights of both backbone and side chains were controllable and the molecular weight distributions kept relatively narrow (M_w/M_n ≤ 1.39). The results of fluorescence spectroscopy, dynamic laser light scattering and transmission electron microscopy showed this double hydrophilic copolymer was stimuli‐responsive to both pH and salinity. It can aggregate to form reversible micelles in basic surroundings which can be conveniently dissociated with the addition of salt at room temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3142–3153, 2009