Morphology of poly(p‐oxybenzoyl) crystal prepared by direct polycondensation of p‐hydroxybenzoic acid with p‐toluenesulfonyl chloride in pyridine

Poly(p‐oxybenzoyl) (POB) crystals were prepared with the reaction‐induced crystallization of oligomers during the direct polycondensation of p‐hydroxybenzoic acid (HBA) with p‐toluenesulfonyl chloride (TsCl) and N,N‐dimethylformamide in pyridine. Sheaflike lozenge‐shaped POB crystals were obtained, of which the longer diagonal was 7.0–8.0 μm. The influence of the polymerization condition on the morphology was examined to optimize the preparative condition for the crystals exhibiting the clearest habit, and the favorable condition was determined as the molar ratio of TsCl to HBA of 1.3 and polymerization concentration of 3.0%. The crystals possessed extremely high crystallinity and outstanding thermal stability. The formation mechanism of the crystal was proposed as follows. When the number‐average degree of polymerization of the oligomers exceeded a critical value of about 4, they were precipitated to form the hexagonal lamellae. The crystals were grown very quickly to lozenge‐shaped crystal through screw dislocation with the continuous precipitation of oligomers from the solution. Finally, the further polymerization occurred in the precipitated crystal with developing polymer‐chain packing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3275–3282, 2003     

Effect of binary aqueous‐organic solvents on the reaction of phenacyl bromide with nitrobenzoic acid(s) in the presence of triethylamine

Second‐order rate constants (k₂) of the reaction between phenacyl bromide and equimolar mixture of nitrobenzoic acid(s)–triethylamine have been determined in dimethylformamide (DMF)/acetonitrile (ACN)/acetone and aqueous mixtures of these solvents by conductometric method at 30°C. The rates of nitrobenzoic acids are found to be in the order: 4‐NO₂ > 3‐NO₂ > 3,5‐(NO₂)₂. Changes in the rate just by the addition of water (1% (v/v)) into organic component is rationalized. Decrease in the values of k₂ on increasing water content in organic solvent is explained on the basis of preferential solvation phenomenon. Single and dual regression analysis using the various solvent parameters of aqueous mixtures (E_T(30), Z, π*, β, α, and Y) resulted in π* and α as the best parameters to explain solvation of nitrobenzoates. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 401–409, 2004     

Complexes of acid amides with aprotic polar solvents IV. Complexes of poly(acid amides) with aprotic solvents

The process of solid-phase cyclodehydration of films cast from solutions of poly(acid amides) (PAA) in dimethylformamide, dimethylacetamide and N-methyl-2-pyrrolidone has been investigated by mass-spectrometric thermal analysis (MTA). It is shown that MTA is a structure-sensitive method making it possible to follow the appearance and changes in the character of ordered structures formed in PAA films. The authors relate these structures to the process of crystallization of complexes of PAA with aprotic polar solvents.     

Oxidation of magnesium with cyclopentadienyl(triphenylphosphine)nickel chloride in aprotic solvents

The products of magnesium oxidation with cyclopentadienyl(triphenylphosphine)nickel chloride were revealed. Effective equilibrium constants of adsorption of the reagents on the metal surface, entropy and enthalpy of these processes, rate constants, and activation energy were determined. A probable scheme of the process is assumed.     

Synthesis and structural studies of new N‐(p‐toluenesulfonyl)amino acid o‐phenolamides

N‐(p‐Toluenesulfonyl)glycine o‐phenolamide ( 3a ) and the analogous derivatives of d,l‐alanine ( 3b ), L ‐valine ( 3c ), L ‐leucine ( 3d ), and L ‐phenylalanine ( 3e ) were synthesized in yields >80% by condensation of N‐(p‐toluenesulfonyl)amino acyl chlorides with o‐aminophenol. The structure and conformation of these amides were established by NMR spectroscopy and X‐ray crystallography. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:247–253, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10135     

Organoselenium‐substituted poly(p‐phenylenevinylene)

A new type of conjugated polymer, organoselenium substituted poly(p‐phenyleneviny‐ lene) (PPV), was synthesized from the corresponding alkylselenenyl p‐xylylene dibromide via a Gilch route using potassium tert‐butoxide in THF. The p‐xylylene dibromide precursors were synthesized by reacting lithiated bis(methoxymethyl)benzenes with elemental selenium, followed by alkylation of the generated selenolates. As a final demasking step, the bromomethyl functions were liberated by ether cleavage using boron tribromide. Bis‐alkylselenenyl PPV was obtained with an average molecular weight M_w of approximately 300,000 g/mol and with polydispersity M_w/M_n = 2. Due to low solubility, monoalkylselenenyl PPV was obtained with a considerably lower average molecular weight in the proximity of 16,000 g/mol and with a polydispersity slightly larger than 3. Absorption and fluorescence spectroscopy revealed that the bis‐alkylselenenyl PPV is extensively conjugated. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:656–662, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20167     

Kinetic study of the reactions of p‐nitrophenyl acetate and p‐nitrophenyl benzoate with oximate nucleophiles

The reactions of p‐nitrophenyl acetate (PNPA) and p‐nitrophenyl benzoate (PNPB) with α‐nucleophile oximates, that is, butane 2,3‐dione monoximate, pralidoximate, and other oximates have been studied in the presence of different cationic surfactants. The first‐order rate constant increases with increasing surfactant concentration. The extent of acceleration is dependent on the head group structure of surfactants. The PNPA is more reactive than PNPB toward all the nucleophiles at higher concentration of surfactants. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 57–64, 2009     

Kinetic investigation of the RAFT polymerization of p‐acetoxystyrene

The kinetics of the RAFT polymerization of p‐acetoxystyrene using a trithiocarbonate chain transfer agent, S‐1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐acetic acid)trithiocarbonate, DDMAT, was investigated. Parameters including temperature, percentage initiator, concentration, monomer‐to‐chain transfer agent ratio, and solvent were varied and their impact on the rate of polymerization and quality of the final polymer examined. Linear kinetic plots, linear increase of M_n with monomer conversion, and low final molecular weight dispersities were used as criteria for the selection of optimized polymerization conditions, which included a temperature of 70 or 80 °C with 10 mol % AIBN initiator in bulk for low conversions or in 1,4‐dioxane at a monomer‐to‐solvent volume ratio of 1:1 for higher conversions This study opens the way for the use of DDMAT as a chain transfer agent for RAFT polymerization to incorporate p‐acetoxystyrene together with other functional monomers into well‐defined copolymers, block copolymers, and nanostructures. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2517–2524, 2010     

ESI‐MS studies of palladium (II) complexes with 1‐(p‐toluenesulfonyl)cytosine/cytosinato ligands

The mononuclear complex Pd(1‐TosC‐N3)₂Cl₂ (2) containing 1‐(p‐toluenesulfonyl)cytosine (1) as a ligand, as well as dinuclear complexes Pd₂(1‐TosC^?‐N3,N4)₄ (3) and Pd₂(1‐TosC^?‐N3,N4)₂DMSO₂Cl₂ (4) containing the ligand anion (1‐TosC^?), was mass analyzed by electrospray ionization ion trap MS/MS and high resolution MS. Complexes 3 and 4 were obtained by recrystallization of 2 from DMF and DMSO, respectively. The behavior of complex 2 in different solutions was monitored by electrospray ionization mass spectrometry (ESI‐MS). Under the applied ESI‐MS conditions, complex 2 in methanol reorganized itself dominantly as new complex 3 and the solvent did not coordinate the formed species. In H₂O/DMSO, CH₃CN/DMSO and CH₃OH/DMSO solutions, complex 2 formed several new species with solvent molecules involved in their structure, e.g. complex 4 was formed as the major product. The newly formed species were also examined by LC‐MS‐DAD, confirming the solvent induced reorganization and the solution instability of complex 2. Copyright © 2009 John Wiley & Sons, Ltd.     

Poly(vinyl chloride) reactions with sodium and potassium derivatives of heteroaromatic and aromatic NH- and SH-acids in aprotic solvents

The observed featured and regularities of nucleophilic substitution of chlorine in poly(vinyl chloride) upon its reaction with sodium and potassium derivatives of pyrazole, 3,5-dimethylpyrazole, and 2-thiobenzimidazole, and with sodium thiophenolate have been understood in the frame of hard and soft acids and bases theory.     

Homologous series of alkylsilylphenyl‐substituted poly (p‐phenylenevinylene)s for light‐emitting diodes

Substituent‐induced electroluminescence polymers—poly[2‐(2‐dimethyldodecylsilylphenyl)‐1,4‐phenylenevinylene] [(o‐R₃Si)PhPPV], poly[2‐(3‐dimethyldodecylsilylphenyl)‐1,4‐phenylenevinylene] [(m‐R₃Si)PhPPV], and poly[2‐(4‐dimethyldodecylsilylphenyl)‐1,4‐phenylenevinylene] [(p‐R₃Si)PhPPV]—were synthesized according to the Gilch polymerization method. The band gap and spectroscopic data were tuned by the dimethyldodecylsilyl substituent being changed from the ortho position to the para position in the phenyl side group along the polymer backbone. The weight‐average molecular weights and polydispersities were 8.0–96 × 10⁴ and 3.0–3.4, respectively. The maximum photoluminescence wavelengths for (o‐R₃Si)PhPPV, (m‐R₃Si)PhPPV, and (p‐R₃Si)PhPPV appeared around 500–530 nm in the green emission region. Double‐layer light‐emitting diodes with an indium tin oxide/poly(3,4‐ethylenedioxythiophene)/polymer/Al configuration were fabricated with these polymers. The turn‐on voltages and the maximum brightness of (o‐R₃Si)PhPPV, (m‐R₃Si)PhPPV, and (p‐R₃Si)PhPPV were 6.5–8.7 V and 1986–5895 cd/m², respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2347–2355, 2004     

Preparation of poly(p‐oxybenzoyl) crystals using direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides

Poly(p‐oxybenzoyl) (POB) crystals were prepared by reaction‐induced crystallization during direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides. Polymerizations were carried out at 300 °C in dibenzyltoluene at a concentration of 1% with three kinds of anhydrides of boronic acid such as 3,4,5‐trifluorophenylboronic acid (TFB), 4‐methoxyphenylboronic acid (MPB) and 4‐biphenylboronic acid (BPB). The POB crystals were formed as precipitates in the solution and the morphology was considerably influenced by both the structure of the boronic anhydride and its concentration (c_B). Needle‐like crystals were firmed in the presence of TFB anhydride (TFBA) at c_Bs of 5 and 10 mol % by the spiral growth of lamellae. Spherical aggregates of slab‐like crystals were formed at c_Bs from 50 to 100 mol %. The polymerization with MPB anhydride and BPB anhydride (BPBA) also yielded the needle‐like crystals at c_Bs of 50 and 5 mol %, respectively. The polymerization with TFBA at lower c_B was favorable to prepare the needle‐like crystal. Molecular weight was also influenced by the structure of the boronic anhydride and c_B. M_n increased generally with c_B and BPBA gave the highest M_n of 14.7 × 10³ at c_B of 100 mol %. The loose packing of the molecules in the crystal caused by the bulkiness of the end‐groups made the polymerization in the crystals more efficiently. Morphology and molecular weight of the POB crystals could be controlled by the chemical structure and the content of boronic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis and properties of through‐space conjugated polymers based on cyano‐substituted poly(p‐arylenevinylene)s

New through‐space cyano‐substituted poly(p‐arylenevinylene)s containing a [2.2]paracyclophane unit were synthesized by the Knoevenagel reaction. Polymers 5 and 7 have cyano groups at α‐positions and β‐positions from the dialkoxyphenylene unit, respectively. Their optical and electrochemical behaviors were investigated in detail in comparison with their model compounds. Polymers 5 and 7 exhibited through‐space conjugation via the cyclophane units. Polymer 5 showed greenish blue emission (λ_max = 477 nm) in diluted solution with fluorescence quantum efficiency (?_F) of only 0.007, whereas polymer 7 emitted in the bluish green region (λ_max = 510 nm) with ?_F of 0.32. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5979–5988, 2009     

Kinetic studies of the reactions of pentacyanoferrate(III) complexes with L‐ascorbic acid

The reduction of Fe(CN)₅L^2? (L = pyridine, isonicotinamide, 4,4′‐bipyridine) complexes by ascorbic acid has been subjected to a detailed kinetic study in the range of pH 1–7.5. The rate law of the reaction is interpreted as a rate determining reaction between Fe(III) complexes and the ascorbic acid in the form of H₂A(k₀), HA^?(k₁), and A^2? (k₂), depending on the pH of the solution, followed by a rapid scavenge of the ascorbic acid radicals by Fe(III) complex. With given Ka₁ and Ka₂, the rate constants are k₀ = 1.8, 7.0, and 4.4 M^?1 s^?1; k₁ = 2.4 × 10³, 5.8 × 10³, and 5.3 × 10³ M^?1 s^?1; k₂ = 6.5 × 10⁸, 8.8 × 10⁸, and 7.9 × 10⁸ M^?1 s^?1 for L = py, isn, and bpy, respectively, at μ = 0.10 M HClO₄/LiClO₄, T = 25°C. The kinetic results are compatible with the Marcus prediction. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 126–133, 2005     

Comparison of the reactivity of N‐(p‐toluenesulfonyl)‐sulfinimidoyl fluorides and chlorides toward triphenylphosphine

The path of the reaction of aryl‐N‐(p‐toluenesulfonyl)‐sulfinimidoyl fluorides and triphenylphosphine is highly dependent on the order of the reactants addition. Addition of triphenylphos‐phine to aryl‐N‐(p‐toluenesulfonyl)‐sulfinimidoyl fluorides results in the formation of triphenyl(aryl‐thio)phosphonium salts of N,N′‐bis(p‐toluenesul‐fonyl)aryl‐sulfinamidines and triphenyldifluorophosphorane. By changing the reagent addition order, we obtained triphenyldifluorophosphorane, P,P,P‐triphenyl‐N‐(p‐toluenesulfonyl)‐phosphine imide, and diaryl disulfides. The outcome of the reaction aryl‐N‐(arenesulfonyl)‐sulfinimidoyl chlorides and triphenylphosphine does not depend on the order of addition of the reactants. P,P,P‐Triphenyl‐N‐(arenesulfonyl)‐phosphine imides, triphenyldichloro‐phosphorane, and diaryl disulfides were formed as a result. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:66–71, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20408     

Dicarboxylic imide‐substituted poly(p‐phenylene vinylenes) with high electron affinity

Synthesis of n‐type organic semiconductors with high electron mobilities, good environmental stability, and good processability is an urgent task in current organic electronics. This is because most of π‐conjugated materials are p‐type and prefer to transport positive hole carriers. In this article, a series of new dicarboxylic imide‐substituted poly(p‐phenylene vinylenes) (DI‐PPVs) were first synthesized. They exhibited a high electron affinity of 3.60 eV and thus are able to transport electrons. The polymers showed tunable solubility in common organic solvents and high chemical and thermal stability. They remain rigidity of the PPV backbone, and strong interchain π‐stacking was observed in thin films by X‐ray diffraction measurement. All these suggested that these polymers could serve as good candidates as n‐type semiconductors in organic electronic devices such as n‐channel field‐effect transistors and all polymer‐based solar cells. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 186–194, 2010     

Solvatochromic equilibria of cobalt(II) chloride in binary mixtures of dipolar aprotic solvents with water

The visible absorption spectra of CoCl₂ in binary mixtures of acetone, dmf, dma and dmso with H₂O show the existence of configuration equilibria between tetrahedral (T) and octahedral (O) species. Linear correlations between the values of log K (K = [O]/[T]) and the mole fraction of H₂O, _w, have been observed in all the systems under study; their slopes decrease linearly with an increase of the donor number, DN, of the organic component of the mixture. The formation of octahedral species is enthalpy favoured but entropy disfavoured. It was found that both H and S values change linearly with _w and the slopes of these relationships depend clearly on the DN values.     

Selectivity of monomeric metaphosphate reactions with alcohols in polar aprotic solvents

Evidence is presented for selectivity in the reaction of metaphosphate, PO₃^?, with methanol in preference to t-butanol in acetonitrile solution. In dichloromethane solution there is also evidence for preferential nucleophilic solvation of reactant by methanol $\text{vs.}$ t-butanol.     

Reactions of oxalyl chloride with 1,2-cycloalkanediols in the presence of triethylamine

The relationship between the product patterns and the configurations of 1,2-cycloheptane- and 1,2-cyclooctanediols 9 in the cyclocondensations with oxalyl chloride in the presence of triethylamine at 0 degrees C has been shown analogous to that obtained for 1,2-disubstituted acyclic ethylene glycols 1: cis-1,2-cyclooctanediol (9f) produced the cyclic oxalate 14f as the major product, while trans-1,2-cycloheptanediol (9e) and trans-1,2-cyclooctanediol (9g) formed the cyclic carbonates 12e, g as the major products. On the other hand, the cyclic oxalates 14a-d were formed as the major products from 1,2-cyclopentane- and 1,2-cyclohexanediols regardless of the configuration. These results can be accounted for by assuming the boat-like transition states for cyclizations of the half esters of comparatively rigid five- and six-membered diols 9a--d. The cyclic oxalates 14a, c may be directly formed through the resulting tetrahedral intermediates from cis-diols (9a,c), and the cyclic carbonates 12a,c as the minor products after ring inversion of the tetrahedral intermediates. The tetrahedral intermediates from the trans-isomers 9b, d cannot undergo ring inversion, producing no traces of the cyclic carbonates 12b, d.     

Synthesis and characterization of naphthyl‐substituted poly(p‐phenylenevinylene)s with few structural defects for polymer light‐emitting diodes

A series of naphthyl‐substituted poly(p‐phenylenevinylene)s (2N‐PPV, 4N‐PPV, and NAP‐PPV) has been synthesized and characterized by Fourier transform IR, ¹H NMR, and elemental analysis. The polymers possess excellent solubility, high molecular weights, good thermal stability, and high photoluminescence efficiencies. Thermogravimetric analysis reveals the onset of degradation to be 347, 301, and 306 °C for 2N‐PPV, 4N‐PPV, and NAP‐PPV, respectively. The differential scanning calorimetry investigation gives the respective glass‐transition temperature values of 118, 135, and 141 °C. The UV and photoluminescence spectra measurements reveal that the polymers exhibit similar optical properties, indicating that side‐chain substitution has little effect on the optical properties of this series of polymers. Proton NMR measurement of the signal due to tolane–bisbenzyl defects at around 2.7 ppm indicates that all the polymers have negligible amounts of tolane–bisbenzyl defects along the polymer main chain as a result of the steric bulk imposed by the naphthalene side chain. The highest occupied and lowest unoccupied molecular orbital energy levels of the polymers are investigated through cyclic voltammetry. Polymer light‐emitting diodes utilizing the polymers as the emissive layer with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)/polymer/Ba/Al are fabricated and evaluated. The diodes emit blue‐green to yellow‐green light with maximum peaks at 518, 542, and 486 nm for 2N‐PPV, 4N‐PPV, and NAP‐PPV, respectively. The respective turn‐on electric fields of the diodes are 0.84, 0.69, and 0.83 MV/cm and the respective maximum external quantum efficiencies are 0.08, 0.54, and 0.02%. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1647–1657, 2004