Novel polymers with a high carboxylic acid loading

Click chemistry has been used to prepare a range of novel polymers with pendant carboxylic acid side groups. Four azido carboxylic acids, either mono‐ or difunctional and aliphatic or aromatic, have been prepared and thoroughly characterized. Extensive model reactions with 1‐ethyl‐4‐hydroxybenzene, the simplest model for poly(4‐hydroxystyrene), and the four azido carboxylic acids have been conducted to establish the proper reaction conditions and provide an analytical frame for the corresponding polymers. Poly(4‐hydroxystyrene) moieties in three different polymers—poly(4‐hydroxystyrene), poly(4‐hydroxystyrene‐co‐methyl methacrylate), and poly(4‐hydroxystyrene‐b‐styrene)—have been quantitatively transformed into oxypropynes by the use of either Williamson or Mitsunobu strategies and subsequently reacted with the azido carboxylic acids. Detailed differential scanning calorimetry investigations of all the polymers in general exhibit [when poly(4‐hydroxystyrene) is a substantial part] significant changes in the glass‐transition temperature from the polar poly(4‐hydroxystyrene) (120–130 °C) to the much less polar alkyne polymers (46–60 °C). A direct correlation between the nature of the pendant groups in the derivatized polymers and the glass‐transition temperature has emerged: the aromatic carboxylic acids give high glass‐transition temperatures (90–120 °C), and the aliphatic carboxylic acids give lower glass‐transition temperatures (50–65 °C). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:6360–6377, 2006     

Direct synthesis of terminally “clickable” linear and hyperbranched polyesters

1,3‐Dipolar cycloaddition of an organic azide and an acetylenic unit, often referred to as the “click reaction”, has become an important ligation tool both in the context of materials chemistry and biology. Thus, development of simple approaches to directly generate polymers that bear either an azide or an alkyne unit has gained considerable importance. We describe here a straightforward approach to directly prepare linear and hyperbranched polyesters that carry terminal propargyl groups. To achieve the former, we designed an AB‐type monomer that carries a hydroxyl group and a propargyl ester, which upon self‐condensation under standard transesterification conditions yielded a polyester that carries a single propargyl group at one of its chain‐ends. Similarly, an AB₂ type monomer that carries one hydroxyl group and two propargyl ester groups, when polymerized under the same conditions yielded a hyperbranched polymer with numerous “clickable” propargyl groups at its molecular periphery. These propargyl groups can be readily clicked with different organic azides, such as benzyl azide, ω‐azido heptaethyleneglycol monomethylether or 9‐azidomethyl anthracene. When an anthracene chromophore is clicked, the molecular weight of the linear polyester could be readily estimated using both UV–visible and fluorescence spectroscopic measurements. Furthermore, the reactive propargyl end group could also provide an opportunity to prepare block copolymers in the case of linear polyesters and to generate nanodimensional scaffolds to anchor a variety of functional units, in the case of the hyperbranched polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3200–3208, 2010     

Large‐scale synthesis of arborescent polystyrenes

A method was developed for the large (100 g) scale synthesis of arborescent polystyrenes using acetyl coupling sites. Successive generations of dendritic graft polymers were obtained from cycles of polystyrene substrate acetylation with acetyl chloride and coupling in the presence of LiCl with “living” polystyryllithium chains capped with 2‐vinylpyridine units. The grafting yield for the synthesis of a generation zero (G0 or comb‐branched) arborescent polystyrene under the conditions previously reported for the 10 g scale reactions decreased from 95 to 75% when scaled up to 100 g. The lowered yield was linked to side chain dimerization and deactivation of the macroanions. The modified 100 g scale procedure, using end‐capping of the polystyryllithium with 1,1‐diphenylethylene and the addition of 3–6 equivalents per living end of 2‐vinylpyridine as a dilute solution, eliminated side chain dimerization and provided grafting yields of up to 95%. The large‐scale procedure developed was applied to the synthesis of arborescent polystyrenes of generations up to G2 with low polydispersity indices (M_w/M_n ≤ 1.04) and molecular weights increasing in an approximately geometric fashion for each cycle. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5742–5751, 2008     

Linear polyurethanes made from naturally occurring tartaric acid

Naturally occurring tartaric acid was used as raw material for the synthesis of novel linear polyurethanes (PURs) bearing two carboxylate side‐groups in the repeating unit. Aliphatic and aromatic PURs were obtained by reaction in solution of alkyl and benzyl tartrates with hexamethylene diisocyanate and 4,4′‐methylene‐bis(phenyl isocyanate), respectively. All the novel PURs were thermally stable and optically active. The aliphatic carboxylate‐containing PURs had M_w in the 40–70 kDa range, with PD between 2.1 and 2.5; all were semicrystalline polymers with melting temperatures between 100 and 150 °C and T_g in the 50–80 °C range. The aromatic PURs were amorphous materials with molecular weights between 18 kDa and 25 kDa and T_g above 130 °C. Hydrogenolysis of the PUR made from hexamethylene diisocyanate and benzyl tartrate yielded PURs containing up to 40% of free carboxylic side‐groups. The tartrate‐derived PURs displayed enhanced sensitivity to hydrolysis compared with their unsubstituted 2,6‐PUR homologs. The PURs bearing free carboxylic groups were unique in being degraded by water upon incubation under physiological conditions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2391–2407, 2009     

Dehydrocoupling and Diels–Alder reactions on siloxane polymers

Dehydrocoupling reactions between linear poly(methylhydrosiloxane) {Me₃SiO–[MeSi(H)O]_n–SiMe₃} and alcohols such as cholesterol, anthracene‐9‐carbinol, (12‐crown‐4)‐2‐carbinol, pyrene‐1‐carbinol, 4‐methyl‐5‐thiazoleethanol, and 4‐pyridilpropanol were introduced under catalytically mild conditions. The degrees of conversion of Si? H bonds in polysiloxane were monitored with ¹H NMR spectra. The reaction of the 9‐methoxyanthracene adduct on siloxane polymers and maleimide derivatives (maleimide, N‐ethylmaleimide, and maleic acid anhydride) produced [2+4]‐cycloadducts in very high yields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4013–4019, 2002     

Poly(glyceryl glycerol): A multi‐functional hydrophilic polymer for labeling with boronic acids

The synthesis of poly(glyceryl glycerol) (PGG), a polymer featuring a polyethylene oxide backbone and 1,2‐diol groups in every repeating unit, is presented. PGG was prepared by monomer‐activated ring‐opening polymerization of (dl ?1,2‐isopropylidene glyceryl) glycidyl ether, introducing a functional azido‐ or bromo‐head group to each chain. The 1,2‐diol groups, which were released by acidic deprotection, readily reacted with boronic acid derivatives, enabling the attachment of functional moieties under mild aqueous conditions. PGG was conjugated to poly(l ‐lactide) (PLLA) via azide‐alkyne cycloaddition and the resulting copolymer assembled into nanoparticles of 70 nm diameter in aqueous solution. Labeling of the PGG–PLLA particles was achieved by simple mixing with a boronic acid‐functional fluorophore. The labeling efficiency was determined by fluorescence spectroscopy to be 85.5% for boronic acid‐functional rhodamine B compared with 0.2% for plain rhodamine B. The strong interaction of PGG with boronic acids is ascribed to its polyol structure. This study demonstrates the usefulness and versatility of PGG as a hydrophilic polymer for possible biomedical applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1822–1830     

Long‐chain branched ROMP polymers

This article describes the construction of branched ROMP‐polymer architectures via polycondensation of AB_n‐type macromonomers. For this convergent strategy, a polymer was synthesized that carries several hydroxyl‐groups along the polymer chain and one carboxylic acid group at the chain end. An esterification reaction between these functional groups yielded long‐chain branched polymers. The polymers were analyzed by NMR and SEC to monitor the condensation reaction. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Postfunctionalization of poly(propargyl methacrylate) using copper catalyzed 1,3‐dipolar Huisgen cycloaddition: An easy route to electro‐optic materials

A one‐pot synthetic route based on copper‐catalyzed Huisgen reaction has been developed to functionalize a methacrylate propargylic polymer with azido‐substituted moieties. This procedure was used for the preparation of electro‐optic materials containing well‐known Disperse Red One (DR1) chromophores along with bulky adamantyl moieties (Adam). The postfunctionalization of the propargylic polymer was successfully achieved using different molar ratios of DR1/Adam. These novel polymers exhibit high glass transition temperature owing to the rigid structure of adamantyl units. Moreover, the second harmonic generation measurements demonstrated the effectiveness of adamantyl groups to act as insulating shield limiting thus the electrostatic interactions between chromophores. Indeed, higher optimal chromophore concentration (50 mol %) than in conventional DR1‐containing polymers (30 mol %) allowed us to increase the d₃₃ coefficient up to 92 pm/V. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5652–5660, 2009     

Study of supramolecular side‐chain and cross‐linking polymers by complexation of various H‐donor acids with H‐acceptor copolymers containing pendent carbazole and fluorescent pyridyl units

Two H‐bonded acceptor (H‐acceptor) homopolymers 14 and 17 were successfully prepared by polymerization of fluorescent pyridyl monomers PBT and PBOT ( 12 and 13 ), which were synthesized via Sonogashira coupling and Wittig‐Horner reactions. To increase the glass transition temperatures as well as reduce the π‐π stacking of the photoluminescent (PL) H‐acceptor copolymers and their H‐bonded polymer complexes, fluorescent monomers 12 and 13 were copolymerized with N‐vinylcarbazole monomer CAZ (23) to produce H‐acceptor copolymers 15–16 and 18–19 . Supramolecular side‐chain and crosslinking polymers (i.e., H‐bonded polymer complexes) obtained by complexation of light‐emitting H‐acceptor polymers 14–19 with various proton donor (H‐donor) acids 20–22 were further characterized by DSC, POM, FTIR, XRD, and PL measurements. The mesomorphic properties can be tuned from the nematic phase in H‐acceptor homopolymers ( 14 and 17 ) to the tilted smectic C phase in their H‐bonded polymer complexes ( 14/20–21 and 17/20–22 ) by the introduction of H‐donor acids (20–22). Moreover, the PL properties of light‐emitting H‐acceptor polymers can be adjusted not only by the central structures of the conjugated pyridyl cores but also by their surrounding nonfluorescent H‐donor acids. In general, redder shifts of PL emissions in H‐bonded polymer complexes occurred when the light‐emitting H‐acceptor polymers were complexed with H‐donors having smaller pKa values. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2734–2753, 2009     

All‐aromatic liquid crystalline thermosets with high glass transition temperatures

We have synthesized and characterized a new family of low melting all‐aromatic ester‐based liquid crystal oligomers end‐capped with reactive phenylethynyl end groups. In a consecutive, high‐temperature step, the reactive end groups were thermally activated and polymerization was initiated. This reactive oligomer approach allows us to synthesize liquid crystal thermosets with outstanding mechanical and thermal properties, which are superior to well‐known high‐performance polymers such as PPS and PEEK. We have modified an intractable LC formulation based on hydroquinone and terephthalic acid, with M_n = 1000, 5000, and 9000 g mol^?1, and varied the backbone composition using isophthalic acid, resorcinol, 4‐hydroxy‐benzoic acid, 6‐hydroxy‐2‐naphthoic acid, and chlorohydroquinone. All fully cured polymers showed glass transition temperatures in the range of 164–275 °C, and high storage moduli at room temperature (～ 5 GPa) and elevated temperature (～ 2 GPa at 200 °C). All oligomers display nematic mesophases and in most cases, the nematic order is maintained after cure. Rheology experiments showed that the phenylethynyl end group undergoes predominantly chain extension below 340 °C and crosslinking above this temperature. Highly aligned fibers could be spun from the nematic melt, and we found that the order parameter 〈P₂〉 was not affected by the chain extension and crosslink chemistry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1368–1380, 2009     

Dendronized polymers via Diels–Alder “click” reaction

A modular approach toward the synthesis of polymers containing dendron groups as side chains is developed using the Diels–Alder “click” reaction. For this purpose, a styrene‐based polymer appended with anthracene groups as reactive side chains was synthesized. First through third‐generation polyester dendrons containing furan‐protected maleimide groups at their focal point were synthesized. Facile, reagent‐free, thermal Diels–Alder cycloaddition between the anthracene‐containing polymer and latent‐reactive dendrons leads to quantitative functionalization of the polymer chains to afford dendronized polymers. The efficiency of this functionalization step was monitored using ¹H and ¹³C NMR spectroscopy and FTIR and UV–vis spectrometry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 410–416, 2010     

Phthalide as an activating group for the synthesis of poly(aryl ether phthalide)s by nucleophilic aromatic substitution

The phthalide ring was examined as an activating group for nucleophilic aromatic substitution. The proposed mechanism by which activation occurs is through a ring opening of the phthalide ring to form a Meisenheimer‐like σ complex. 3,3‐Bis(4‐fluorophenyl)phthalide was synthesized and examined under different reaction conditions to determine its suitability for polymer formation. Semiempirical calculations at the PM3 level suggested that 3,3‐bis(4‐fluorophenyl)phthalide is only moderately activated, whereas ¹H, ¹³C, and ¹⁹F NMR spectroscopy suggested that the monomer was not sufficiently activated for nucleophilic aromatic substitution. However, low‐molecular‐weight polymers (number‐average molecular weight < 7000 g/mol) were produced from bisphenol A, hydroquinone, and phenolphthalein. The polymers were characterized by gel permeation chromatography, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, NMR spectroscopy, and differential scanning calorimetry. The polymers displayed relatively high glass‐transition temperatures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3046–3054, 2002     

Hyperbranched polymers from propargyloxysilanes: New types of acetylenic resins

New hyperbranched polymers ( 1P – 3P ) from propargyloxysilanes ( 1 – 3 ) are described. The propargyloxysilanes were prepared from readily available reagents in 53–61% yields. The polymerizations were clean, one‐pot hydrosilylation processes catalyzed by Pt/C that were typically complete within 3 h. The polymers contained pendant acetylenic groups that underwent thermally induced crosslinking reactions. Heating the polymers to 1300 °C in flowing nitrogen resulted in weight losses ranging from 33 to 66%. Methyl substitution resulted in lower thermal stability. Further modification of the polymers was demonstrated by the reaction of 1P and 2P with phenylethynyldimethylsilane in the presence of a Pt catalyst. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3383–3391, 2001     

Water soluble azido polyisocyanopeptides as functional β‐sheet mimics

The design and synthesis of functional biomimetic water soluble polymers with a defined secondary structure has been developed using β‐sheet polyisocyanopeptide scaffolds. Water soluble isocyanopolymers were prepared by random copolymerisation of the azido functionalized isocyanopeptides with nonfunctionalised methyl ester isocyanides derived from alanine. Upon saponification of the latter function a rigid rod water soluble polymer was obtained with an accessible azide for postfunctionalization. The potential of these biomimetic polymers was successfully demonstrated by using the click chemistry reaction of these polymers with an acetylene functionalised rhodamine dye. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4150–4164, 2009     

Synthesis and characterization of poly(phenylacetylenes) featuring activated ester side groups

Four monomers based on 4‐ethynylbenzoic acid have been synthesized, one of those featuring an activated ester. With the metathesis catalytic system WCl₆/Ph₄Sn, these acetylenic monomers could successfully be polymerized yielding conjugated polymers with molecular weights of around 10,000 to 15,000 g/mol and molecular weight distributions M_w/M_n ≤ 2.1. Also the copolymerization of phenylacetylene or methyl 4‐ethynylbenzoate with pentafluorophenyl 4‐ethynylbenzoate as reactive unit was conducted. Polymer analogous reactions of the reactive polymers and copolymers with amines have been investigated and it was found that poly(pentafluorophenyl 4‐ethynylbenzoate) featured a significant reactivity, such that reactions proceeded quantitatively even with aromatic amines. Moreover the UV‐Vis spectra of the activated ester based polymer before and after conversion with aliphatic amines showed a change, indicating an effect on the conjugated backbone of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Polybenzimidazoles tethered with N‐phenyl 1,2,4‐triazole units as polymer electrolytes for fuel cells

Polybenzimidazole (PBI) polymers tethered with N‐phenyl 1,2,4‐triazole (NPT) groups were prepared from a newly synthesized aromatic diacid, 3′‐(4‐phenyl‐4H‐1,2,4‐triazole‐3,5‐diyl) dibenzoic acid (PTDBA). The obtained polymers show superior thermal and chemical stability and good solubility in many aprotic solvents. The inherent viscosities of all polymers were around 1 dL/g. They exhibit high thermal stability with initial decomposition temperature ranging from 515 to 530 °C, high glass transition temperature ranging from 375 to 410 °C, and good mechanical properties with tensile stress in the range of 66–98 MPa and modulus 1897–2600 MPa. XRD analysis indicates that these polymers are amorphous in nature. Physicochemical properties such as water and phosphoric acid‐uptake, oxidative stability, and proton conductivity of membranes of these polymers have also been determined. The proton conductivity ranged from 4.7 × 10^?3 to 1.8 × 10^?2 S cm^?1 at 175 °C in dry conditions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2289–2303, 2009     

Cyclic poly(ε‐caprolactone) synthesized by combination of ring‐opening polymerization with ring‐closing metathesis,ring closing enyne metathesis,or “click” reaction

This article described the synthesis of cyclic poly(ε‐caprolactone) (PCL) via ring‐closing metathesis (RCM), ring closing enyne metathesis (RCEM), and “click” reaction of different difunctional linear PCL. Linear PCL precursors were prepared by ring‐opening polymerization (ROP) of ε‐caprolactone in bulk using 10‐undecen‐1‐ol or propargyl alcohol as the initiator, followed by reacting with corresponding acyl chloride containing vinyl or azido end group. The subsequent end‐to‐end intramolecular coupling reactions were performed under high dilution conditions. The successful transformation of linear PCL precursor to cyclic PCL was confirmed by Gel permeation chromatography, ¹H NMR, and Fourier transform infrared measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3022–3033, 2009     

Influence of alkyl chains of amphiphilic hyperbranched poly(ester amine)s on the phase‐transfer performances for acid dye and the aggregation behaviors at the interface

Hyperbranched poly(ester amine) (HPEA) with terminal secondary amine groups was synthesized by the Michael addition reaction between piperazine and trimethylolpropanetriacrylate with a molar ratio of 13:6. It was further reacted with a series of aliphatic acid chlorides, including stearoyl chloride, dodecanoyl chloride, and octanoyl chloride, to yield three modified amphiphilic hyperbranched polymers, which were termed HPEA‐C18, HPEA‐C12, and HPEA‐C8, respectively. These polymers were characterized with Fourier transform infrared, ¹H NMR, gel permeation chromatography, and differential scanning calorimetry measurements. Because of the existence of interior tertiary amine groups, the modified amphiphilic polymers were used as host molecules to extract the guest acid dye, methyl orange (MO), from the aqueous layer to the organic layer on the basis of the acid–base interaction. The influences of the pH of the aqueous layer and the length of the alkyl chains in the modified polymers on the phase‐transfer performances were investigated. The results indicated that more MO molecules could be extracted at a lower pH because of the formation of more quaternary ammonium ions within the host molecules. As the length of the alkyl chains in the modified polymers increased, both the transfer capability and the intermolecular aggregation at the interface were enhanced. The extracted MO could be reversibly released from the organic layer to the aqueous layer under basic conditions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2921–2930, 2005     

RAFT polymerization of activated 4‐vinylbenzoates

The reversible addition fragmentation chain transfer (RAFT) polymerization of five active ester monomers based on 4‐vinylbenzoic acid had been investigated. Pentafluorophenyl 4‐vinylbenzoate could be polymerized under RAFT conditions yielding polymers with very good control over molecular weight and narrow molecular weight distributions. Following the synthesis of diblock copolymers consisting of polystyrene, polypentafluorostyrene, poly(4‐octylstyrene), or poly(4‐acetoxystyrene) as an inert block and poly(pentafluorophenyl 4‐vinylbenzoate) as a reactive block was successfully performed. The diblock copolymer poly(pentafluoro styrene)‐block‐poly(pentafluorophenyl 4‐vinylbenzoate) had been analyzed by ¹⁹F NMR spectroscopy in solution, demonstrating the synthetic potential of pentafluorophenyl 4‐vinylbenzoate as an extremely valuable monomer for the synthesis of highly functionalized polymeric architectures. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1696–1705, 2009     

Synthesis of dendritic carbohydrate end‐functional polymers via RAFT: Versatile multi‐functional precursors for bioconjugations

Well‐defined pyridyl disulfide (PDS) end‐functionalized polymer‐dendritic carbohydrate scaffolds are reported as novel precursors for the attachment of biomolecules. This synthetic approach combines reversible addition fragmentation chain transfer (RAFT) polymerization and “click” reactions. Poly(N‐(2‐hydroxypropyl) methacrylamide) (PHPMA) with 2‐mercaptothiozalidine end‐groups was prepared by RAFT polymerization yielding molecular weights of M_n = 4300 and 9900, both with a polydispersity of less than 1.2. These polymers were then attached to dendritic mannose scaffolds preconstructed via consecutive “click” reactions. Finally, the ω‐dithiobenzoate RAFT end‐group of PHPMA was modified to yield PDS functionality, by aminolysis in the presence of 2,2′‐dithiodipyridine. This PDS end‐functionalized PHPMA‐dendritic carbohydrate scaffold is a versatile precursor for bioconjugations, as the synthetic procedure can easily accommodate a range of sugar functionalities. In addition, the PDS groups can be used to react with any thiol present in a biomolecule (e.g., cysteine residue in proteins, or ? SH terminal nucleotides). To demonstrate the utility of these scaffolds we describe their bioconjugation to short interfering RNA. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4302–4313, 2009