Synthesis and properties of highly refractive polyimides derived from fluorene‐bridged sulfur‐containing dianhydrides and diamines

Highly refractive and transparent polyimides (PIs) based on fluorene‐bridged and sulfur‐containing monomers have been developed. An aromatic dianhydride, 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride (3SDEA), was polymerized with several fluorene‐containing diamines, including commercially available 9,9′‐bis(p‐aminophenyl)fluorene (APF), 9,9′‐bis[4‐(p‐aminophenoxy)phenyl]fluorene (OAPF), and newly synthesized 9,9′‐bis[4‐(p‐aminophenyl)sulfanylphenyl]fluorene (ASPF) to afford series A PIs. Meanwhile, series B PIs were obtained from a new dianhydride, 4,4′‐[(9H‐fluorene‐9‐ylidene)bis(p‐phenylsulfanyl)]diphthalic anhydride (FPSP) and two aromatic diamines, ASPF and 4,4′‐thiobis[(p‐phenylenesulfanyl)aniline] (3SDA) via a two‐step polycondensation procedure. The PIs exhibit good thermal stabilities, such as relatively high glass transition temperatures in the range of 220–270 °C and high initial thermal decomposition temperatures (T_10%) exceeding 490 °C. The 9,9′‐disubstituted fluorene moieties endow the PI films with good optical transparency. The optical transmittances of the PI films at 450 nm are all higher than 80% for the thickness of about 10 μm. Furthermore, the highly aromatic fluorene moiety and flexible thioether linkages in the molecular chains of the PIs provide them with high refractive indices of 1.6951–1.7258 and small birefringence of 0.0056–0.0070. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1510–1520, 2008     

Flexible nanocrystalline‐titania/polyimide hybrids with high refractive index and excellent thermal dimensional stability

In this study, a novel synthetic route was developed to prepare polyimide–nanocrystalline–titania hybrid optical films with a relatively high titania content (up to 50 wt %) and thickness (20–30 μm) from soluble polyimides containing hydroxyl groups. Two series of newly soluble polyimides were synthesized from the hydroxy‐substituted diamines with various commercial tetracarboxylic dianhydrides. The hydroxyl groups on the backbone of the polyimides could provide the organic–inorganic bonding and resulted in homogeneous hybrid solutions by controlling the mole ratio of titanium butoxide/hydroxyl group. AFM, SEM, TEM, and XRD results indicated the formation of well‐dispersed nanocrystalline‐titania. The flexible hybrid films could be successfully obtained and revealed relatively good surface planarity, thermal dimensional stability, tunable refractive index, and high optical transparency. A three‐layer antireflection coating based on the hybrid films was prepared and showed a reflectance of less than 0.5% in the visible range indicated its potential optical applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1433–1440, 2010     

Synthesis of highly refractive polyimides derived from 3,6‐bis(4‐aminophenylenesulfanyl)pyridazine and 4,6‐bis(4‐aminophenylenesulfanyl)pyrimidine

A series of aromatic polyimides (PIs) containing pyridazine or pyrimidine in their main chains has been developed. All of the PIs were prepared from newly synthesized diamines, 3,6‐bis(4‐aminophenylenesulfanyl)pyridazine (APP), 4,6‐bis(4‐aminophenylenesulfanyl)pyrimidine (APPM) and aromatic dianhydrides, 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride (3SDEA) and 4,4′‐oxydiphthalic anhydride (ODPA) via the conventional two‐step polycondensation. The PIs showed good thermal stability with 10% weight loss at temperatures above 450 °C and glass transition temperatures above 190 °C. Films with a 10‐μm thickness exhibited good optical transparency above 80% at 500 nm, high refractive indices ranging from 1.7218 to 1.7499, and low birefringence between 0.0066 and 0.0102. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4886–4984, 2009     

Synthesis of highly refractive and transparent polyimides derived from 4,4′‐thiobis[2″,6″‐dimethyl‐4″‐(p‐phenylenesulfanyl)aniline]

New sulfur‐containing aromatic diamines with methyl groups at the ortho position of amino groups have been developed to prepare highly refractive and transparent aromatic polyimides (PIs) in the visible region. All aromatic PIs derived from 4,4′‐thiobis[2″‐methyl‐4″‐(p‐phenylenesulfanyl)aniline ( 2 ), 4,4′‐thiobis[2,″6″‐dimethyl‐4″‐(p‐phenylenesulfanyl)aniline ( 5 ), and aromatic dianhydride, 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride ( 6 ) were prepared via a two‐step polycondensation. All PIs showed good thermal properties, such as 10% weight loss temperature in the range of 497–500 °C and glass transition temperatures above 196 °C. In addition, the PIs showed good optical properties, such as optical transparency above 75% at 450 nm with a 10‐μm film thickness, high refractive indices ranging from 1.7135 to 1.7301, and small in‐plane/out‐of‐plane birefringences between 0.0066 and 0.0076. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 656–662, 2010     

Synthesis and characterization of highly refractive polyimides from 4,4′‐thiobis[(p‐phenylenesulfanyl)aniline] and various aromatic tetracarboxylic dianhydrides

An aromatic sulfur‐containing diamine 4,4′‐thiobis[(p‐phenylenesulfanyl) aniline] (3SDA) was synthesized and polymerized with a sulfur‐containing dianhydride 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride (3SDEA) and three nonsulfur aromatic tetracarboxylic dianhydrides, respectively to afford four poly(amic acid)s (PAAs) with the inherent viscosities of 0.54–1.04 dL/g. Flexible and tough polyimide (PI) films obtained from the PAA precursors showed good thermal, mechanical, and optical properties. The glass transition temperatures (T_gs) of the PIs ranged from 179.1–227.2 °C determined by differential scanning calorimetry (DSC), and 173.8–227.3 °C by dynamic mechanical analysis (DMA), depending on the dianhydride used. The 10% weight loss temperatures were in the range of 500–536 °C, showing high intrinsic thermal‐resistant characteristics of the PI films. The PI films also showed good optical transparency above 500 nm, which agreed well with the calculated absorption spectra using the time‐dependent density functional theory. The average refractive indices (n_av) measured at 632.8 nm were 1.7191–1.7482, and the in‐plane/out‐of‐plane birefringences (Δn) were 0.0068–0.0123. The high refractive indices originate from the high sulfur contents, good molecular packing, and the absence of bulky structures. The relatively small birefringence mainly results from the flexible thioether linkages structures of the diamine. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5606–5617, 2007     

Synthesis and properties of cross‐linkable high molecular weight fluorinated copolyimides

A series of novel high molecular weight fluorinated co‐polyimides (Co‐PIs) containing styryl side chain based on 1,3‐bis(2‐trifluoromethyl‐4‐aminophenoxy)‐5‐(2,3,4,5‐tetrafluorophenoxy)benzene (6FTFPB) were successfully synthesized. The weight‐average molecular weights (M_ws) and polydispersities of the co‐polyimides were in the range 8.93–10.81 × 10⁴ and 1.33–1.82, respectively. The co‐polyimide film showed excellent solubility in organic solvents, high tensile properties (tensile strength exceeded 91 MPa), excellent optical transparency (cutoff wavelength at 332–339 nm and light transparencies above 89% at a wavelength of 550 nm), and high thermal stability (5% thermal weight‐loss temperature up to 510 °C). The casting and spinning films could be cross‐linked by thermal curing. The cured films show better combination property (including excellent resistance to solvents) than that of co‐polyimides. For instance, the glass transition temperature of Co‐PI‐1 (the molar weight ratio of 6FTFPB was 30%) increased from 217 to 271 °C, the tensile strength enhanced from 94 to 96 MPa, the 5% thermal weight‐loss temperature improved from 514 to 525 °C. Moreover, after cured, Co‐PI‐1 film also has a coefficient of thermal expansion (CTE) value of 60.3 ppm °C^?1, low root mean square surface roughness (R_q) at 4.130 nm and low dielectric constant of 2.60. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 349–359     

Synthesis of high refractive‐index melt‐stable aromatic polyphosphonates

The synthesis of aromatic polyphosphonates based on the step polymerization of various bisphenols and dichlorophenyl phosphine oxide was investigated. The effect of catalyst, type, concentration, and polymerization time were systematically varied to obtain high molecular weight polymers. Very high molecular weight tough, ductile materials with a high degree of optical clarity were synthesized. In contrast with the aromatic polycarbonates, the refractive index was increased from 1.58 to 1.60 (for the bisphenol A‐based system) and 1.64 for a biphenol‐based system. The latter was still an amorphous soluble polymer as a result of the non‐coplanar nature of the phenyl phosphine oxide bond, unlike the analogous polycarbonate. Hydrolytically stable melt‐processable cumyl phenol end‐capped polyphosphonates were successfully achieved for the first time. Rheological studies show that these end‐capped systems are melt‐stable at 200 °C, whereas the systems of initially higher molecular weight but without any well‐defined end capping clearly degraded quickly probably as a result of an acid‐catalyzed hydrolysis process. Extensive high char yields were produced upon pyrolysis in either nitrogen or air, suggesting good fire resistance. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2904–2910, 2001     

9,9′‐spirobifluorene‐containing polycarbonates: Transparent polymers with high refractive index and low birefringence

Syntheses of 2,2′‐bisalcoholic group‐substituted 9,9′‐spirobifluorene monomers 2 were performed by the reaction of 2,2′‐dihydroxy‐9,9′‐spirobifluorene 2a with haloalcohols. Polycarbonates consisting of 9,9′‐spirobifluorene skeleton in the main chain (PC 4 ) were synthesized by the polycondensation of 2,2′‐bisalcoholic monomers 2 and triphosgene or diphenyl carbonate. PC 4 showed good thermal stability: the 5% weight loss temperature was over 330 °C under both nitrogen and air atmospheres. The glass transition temperature was in a range of 16–269 °C estimated by differential scanning calorimetry, depending on the flexibility of the alkylene or oxyethylene chains of 2 . PC 4 showed high solubility toward ordinary organic solvents such as CHCl₃, benzene, and THF, making possible the preparation of the flexible thin films. Very high refractive index in a range of 1.62–1.66 at 589 nm was observed although PC 4 consists only of C, H, and O atoms, whereas very low degree of birefringence was confirmed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3658–3667, 2010     

Solution processable polyamides containing thiazole units and thioether linkages with high optical transparency,high refractive index,and low birefringence

A series of new organic‐soluble polyamides (PAs) bearing flexible thioether linkages and heteroaromatic thiazole units were synthesized from a novel thioether‐bridged diamine monomer (DA) and various commercially available aromatic dicarboxylic acids (1–5) via a direct polycondensation method. The resulting polymers were obtained in high yields and possessed inherent viscosities in the range of 0.41–0.80 dL g^?1. All of the polymers were amorphous in nature, exhibited good solubility and could be easily dissolved in amide‐type polar aprotic solvents and even dissolved in less polar solvents (e.g., tetrahydrofuran, pyridine, and acetone). They showed excellent thermal stability with glass transition temperatures between 207 and 239 °C and 10% weight loss temperatures in excess of 424 °C in nitrogen and 469 °C in air atmosphere. The optical transmittances of the PA films at 450 nm were higher than 85% for the thickness of ～10 μm. The combination of the thiazole moieties and flexible thioether linkages provided PAs with high average refractive indices (n_av) of 1.7414–1.7542 and low birefringences (Δn) of 0.0061–0.0087 at 632.8 nm. In particular, the n_av of PA‐5 derived from DA and 2,2′‐dithiodibenzoic acid exhibited the highest refractive index (1.7542) in the high refractive index PAs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3505–3515     

Synthesis and characterization of novel 3,6‐di[3′,5′‐bis(trifluoromethyl)phenyl]pyromellitic dianhydride for polyimide synthesis

A novel dianhydride monomer, 3,6‐di[3′,5′‐bis(trifluoromethyl)phenyl]pyromellitic dianhydride (12FPMDA), was synthesized via a three‐step process: (1) the preparation of 3,5‐bis(trifluoromethyl)benzene boronic acid (6FBB) and 3,6‐dibromo‐1,2,4,5‐tetramethylbenzene (2B4MB) via Grignard and bromination reactions, respectively; (2) the Suzuki cross‐coupling reaction of 6FBB and 2B4MB, resulting in 3,6‐di[3′,5′‐bis(trifluoromethyl)phenyl]tetramethylbenzene (12F4MB); and (3) the oxidation and cyclodehydration of 12F4MB to afford 12FPMDA. 12FPMDA was then characterized by Fourier transform infrared (FTIR), ¹H NMR, ¹⁹F NMR, elemental analysis, and a melting‐point apparatus, and it was used to prepare polyimides with aromatic diamines such as 1,1‐bis(4‐aminophenyl)‐2,2,2‐trifluoroethane and 4,4′‐diaminodiphenylether. Polyimides were synthesized via a two‐step process: (1) the preparation of poly(amic acid) in p‐chlorophenol with isoquinoline and (2) solution imidization at the reflux temperature for 12 h. They were designed to have molecular weights of 20,000 g/mol via off‐stoichiometry. The resulting polyimides were characterized by FTIR, NMR, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis, and their solubility, solution viscosity, water absorption, coefficients of thermal expansion (CTEs), and dielectric constants were also evaluated. The polyimides exhibited excellent solubility even in acetone and toluene, high glass‐transition temperatures (>311 °C), good thermal stability (>518 °C in air), and well‐controlled molecular weights (19,000–21,000 g/mol). They also provided low CTEs (35–50 ppm/°C), water absorption (1.26–1.35 wt %), and dielectric constants (2.49–2.52). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4217–4227, 2002     

Coefficients of molecular packing and intrinsic birefringence of aromatic polyimides estimated using refractive indices and molecular polarizabilities

Molecular structure dependences of the coefficients of molecular packing (K_p) and the intrinsic birefringence (Δn⁰) were investigated for aromatic polyimides (PIs) using a method based on the modified Lorentz–Lorenz equation and the Vuks equation. This method needs only average refractive indices and polarizability tensors ( ) for PI repeating units. αˆ was calculated using the density functional theory at the B3LYP/6-31+G(d) theory level that was confirmed as optimal for PI repeating units. Because bent or kinked structures in main chain hinder the ordering of polymer chains, K_p decreases in cases that ether linkages are introduced in the main chain and that kinked-structured dianhydrides are used. Introduction of side groups, trifluoromethyl ( CF₃) groups in particular, also causes decreases in K_p. On the other hand, the estimated values of Δn⁰ are proportional to the calculated anisotropy in αˆ (Δα/V_vdw), thus Δn⁰ can be well predicted by computation. The values of Δα/V_vdw are decreased not only by bent structures in the main chain (e.g., ether linkage), presence of side groups, but also by large fractions of imide rings in the polymer structures. The estimated values of Δn⁰ range from 0.338 to 0.470, which are much larger than the reported ones for optically transparent conventional polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2354–2366, 2004     

UV‐induced refractive index modulation of photoreactive polymers bearing N‐acylcarbazole groups

In this study, we report on the synthesis and characterization of photoreactive polymers bearing N‐acetylcarbazole and N‐formylcarbazole groups, respectively. These polymers were easily accessible by polymer analogous acylation of commercially available poly‐(2‐vinylcarbazole). While poly(1‐(2‐vinyl‐9H‐carbazol‐9‐yl)ethanone) (poly‐ 1 ) undergoes a partial photochemical Fries rearrangement, poly(2‐vinyl‐9H‐carbazole‐9‐carbaldehyde) (poly‐ 2 ) decarbonylates smoothly when exposed to UV irradiation. The difference in reactivity between the two acylated polymers is because of the lower stability of the formyl radical, which is formed in the first stage of this photoreaction. Ellipsometric measurements of thin films showed that the photo‐Fries rearrangement in poly‐ 1 causes a change in refractive index by Δn = +0.01 at 650 nm. UV illumination of poly‐ 2 results in a change of the refractive index by Δn = +0.03 at 650 nm, which can be explained by the high yield of the photodecarbonylation of the N‐formylcarbazole groups. Refractive index patterns can be easily realized using lithographic techniques as demonstrated by optical microscopy using a phase contrast set‐up for visualization. Patterned films of poly‐ 1 and poly‐ 2 with feature sizes of about 5 μm were obtained with a mask aligner. Photoreactive polymers bearing N‐acylcarbazole groups are of potential interest for optical applications such as waveguides, optical switches, and data storage devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of intrinsic high‐barrier polyimide derived from a novel diamine monomer containing rigid planar moiety

A new diamine monomer containing rigid planar fluorenone moiety, 2,7‐bis(4‐aminophenyl)‐9H‐fluoren‐9‐one, was synthesized through Suzuki coupling reaction. Then it was reacted with pyromellitic dianhydride to obtain a polyimide (FOPPI) via a conventional two‐step polymerization process. The prepared FOPPI exhibits excellent barrier properties, with the oxygen transmission rate and water vapor transmission rate low to 3.2 cm³·m^?2·day^?1 and 2.9 g·m^?2·day^?1, respectively. The results of wide angle X‐ray diffractograms, positron annihilation lifetime spectroscopy, and molecular dynamics simulations reveal that the excellent barrier properties of FOPPI are mainly ascribed to the crystallinity, high chain rigidity, and low free volume, which are resulted from the rigid planar moiety. FOPPI also shows outstanding thermal stability and mechanical properties with a glass transition temperature up to 420 °C, 5% loss temperature of 607 °C, coefficient of thermal expansion of 1.28 ppm K^?1, and tensile strength of 150.8 MPa. The polyimide has an attractive potential application prospect in the flexible electronics encapsulation area. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2373–2382     

High refractive index materials: A structural property comparison of sulfide‐ and sulfoxide‐containing polyamides

High‐refractive‐index polyamides (PAs) are developed by incorporation of sulfide‐ or sulfoxide linkages and chlorine substituents. The PAs are synthesized through the polycondensation of two novel diamine monomers, 2,2′‐sulfide‐bis(4‐chloro‐1‐(4‐aminophenoxy) phenyl ether (3a) and 2,2′‐sulfoxide‐bis(4‐chloro‐1‐(4‐aminophenoxy) phenyl ether (3b), with various aromatic diacids (a–e). The ortho‐sulfide or sulfoxide units, pendant chlorine groups, and flexible ether linkages in the diamine monomers endowed the obtained PAs with excellent solubilities in organic solvents. The resulting PAs showed high thermal stability, with 10% weight loss temperatures exceeding 415 °C under nitrogen and 399 °C in air atmosphere. The combination of chlorine substituents, sulfide or sulfoxide linkages, and ortho‐catenated structures provided polymers with high transparency along with high refractive index values of up to 1.7401 at 632.8 nm and low birefringences (<0.0075). The structure–property relationships of the analogous PAs containing sulfide or sulfoxide linkages were also studied in detail by comparing the results. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2867–2877     

Fluorene‐rich high performance polyesters: Synthesis and characterization of 9,9‐fluorenylidene and 2,7‐fluorenylene‐based polyesters with excellent optical property

Polyesters PEs containing high content of fluorene units in their backbones were synthesized from 9,9‐diarene‐substituted fluorene diols ( 1 ) and fluorene‐based diacid chlorides ( 2 ) by high temperature polycondensation at 185 °C in diphenyl ether. The molecular weights of the polyesters PE1‐PE5 were in a range of M_w 25,000–165,000. The polyesters displayed their high thermostability: the glass transition temperatures (T_g) by differential scanning calorimetry analysis ranged from 109 to 217 °C, while the 10% weight loss temperatures (T_d10) measured by thermogravimetric analysis were over 400 °C in nitrogen and 395 °C in air. The polyesters had good solubility in most common organic solvents such as chloroform and toluene and gave tough, transparent and flexible cast films. The transmittance of the films was over 80% in the wavelength range from 450 to 700 nm in any PEs . The PEs exhibited high refractive index values around 1.65, while they had very low degree of birefringence. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2549–2556, 2008     

Polarizability and molecular radius of dimethyl-sulfoxide and dimethylformamide from refractive index data

Densities and refractive indicies of dimethylsulfoxide and dimethylformamide were measured at various temperatures and wave-lengths. Polarizabilities and molecular radii were calculated on the basis of Böttcher's theory of electric polarization and compared with the molecular radii evaluated from the molar volumes of the liquids and from geometrical considerations.     

Refractive indices of organo‐metallic and ‐metalloid compounds: A long‐range corrected DFT study

Refractive indices of metal‐ and metalloid‐containing compounds are systematically evaluated using the Lorentz–Lorenz equation with polarizabilities obtained via density functional theory (DFT). Among exchange‐correlation functionals studied, the long‐range corrected (LC) fuctionals yield the lowest errors for the polarizabilities of gaseous compounds and refractive indices of liquids. The LC‐DFT predicts very well the wavelength dependence of refractive indices. A scheme for computing Abbe numbers of organometallic and organometaloid compounds is proposed and a refractive index – Abbe number plot for 80 compounds is constructed. The compounds containing heavier metals tend to have higher refractive index and lower Abbe number, but several outliers, among them Te(CH₃)₂, Ni(PF₃)₄, Sb(C₂F₃)₃, Hg(C₂F₃)₂, are found. For Hg(C₂F₃)₂, also the effect of intramolecular and intermolecular degrees of freedom on polarizability is investigated. The absolute relative error in polarizability decreases from 5.7% for monomer model to 1.7% when a dimer model (derived from the available experimental crystal data) is employed. © 2016 Wiley Periodicals, Inc.     

Synthesis and characterization of thermally stable,high‐modulus polyimides containing benzimidazole moieties

A series of novel benzimidazole‐containing aromatic polyimides were prepared from synthesized 5,4′‐diamino‐2‐phenyl benzimidazole (DAPBI), and commercial dianhydrides by the conventional two‐step polymerization. The obtained films were amorphous and could afford flexible, transparent, and tough films with excellent thermal and mechanical properties. They showed high levels of tension strength of up to 234 MPa, modulus of up to 5.6 GPa without any stretching. According to thermal stability measurements, the glass‐transition temperatures of the polymers were observed between 329 and 425 °C. The 5% weight‐loss temperatures of most polyimides were above 600 °C in nitrogen. Excellent properties of these polyimides were proved to be attributed to the rigid‐rod structure and hydrogen bond of intermacromolecular. SAXS and SEM results showed self‐molecular orientation caused the formation of rod‐like extended conformations. It was demonstrated that high degree of supramolecular order led to the increase of thermal stability and mechanical properties of the polyimide films. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2024–2031, 2009     

Design,synthesis, and characterization of a partially chlorinated acrylic copolymer for low‐loss and thermally stable graded index plastic optical fibers

As a novel material of low loss and high thermal stability, a graded index plastic optical fiber (GI POF) comprised of a copolymer of methyl α‐chloro acrylate (MCA) and 2,2,2‐trichloroethyl methacrylate (TCEMA) was prepared and the thermal, mechanical, and optical characteristics were investigated. Although each homopolymer had low loss and desirable high thermal stability, they had crucial disadvantages for the fiber fabrication process. To draw a MCA polymer (PMCA) fiber, it has to be heated above 270 °C. However, the polymer started to decompose at a lower temperature and produced numerous bubbles. In contrast, TCEMA polymer (PTCEMA) is too brittle to roll up during heat drawing. In this study, we succeeded to improve the strong viscoelasticity and the low decomposition temperature of PMCA and the brittleness of PTCEMA by copolymerizing MCA and TCEMA. In addition, the glass transition temperatures (T_g) of the copolymers were in the range of 133–147 °C and the transmittances of the copolymers were much higher than that of PMMA which has been commonly used as a base material of POF. A suitable GI POF was obtained using the MCA and TCEMA copolymer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3352–3361, 2009     

Fabrication of high‐performance,gradient‐refractive‐index plastic rods with surfmer‐cluster‐stabilized nanoparticles

A novel method was developed with surfmer‐cluster‐stabilized silver nanoparticles to prepare high‐performance, gradient‐refractive‐index (GRIN) plastic rods based on methyl methacrylate. To fabricate the GRIN plastic rods, a novel polymerizable surfactant (surfmer) of 4‐(11‐acryloxyundecyloxy)benzoic acid (AUBA) was synthesized. Silver nanoparticles were prepared with a reverse micelle method in the presence of the novel surfmer. During the fabrication of the silver nanoparticles, the sodium salt of AUBA was formed. GRIN plastic rods were fabricated through centrifugal polymerization and then were heat‐treated at 100 °C under 0.1 Torr for 24 h to remove residual monomers and water. The distribution of the surfmer‐cluster‐stabilized nanoparticles inside the plastic rods was studied with transmission electron microscopy (TEM). The real‐image transmission through the fabricated rods was also confirmed. The results obtained in this investigation suggested that the control of the distribution of surfmer‐cluster‐stabilized nanoparticles could be used to fabricate GRIN rods. Furthermore, the existence of the crosslink‐like surfmers increased the thermal stability of the plastic rods. The GRIN distribution of the rods was established by the dispersion of nanoparticles inside the plastic rods through TEM analysis, refractive‐index analysis, and real‐image transmission. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5933–5942, 2006