Transformation of “living” carbocationic and other polymerizations to controlled/“living” radical polymerization

Transformation of “living” carbocationic polymerization of styrene and isobutene to controlled atom transfer radical polymerization (ATRP) is described and formation of the corresponding AB and ABA block copolymers with styrene (St), methyl methacrylate (MMA, methyl acrylate (MA) and isobornyl acrylate (IBA) was demonstrated. A similar approach was applied to the cationic ring opening polymerization of tetrahydrofuran leading to the AB and ABA block copolymers with St, MMA and MA using ATRP. Site transformation approach was also used for the ring opening metathesis polymerization of norbornene and polycondensation systems using polysulfone as an example. In both cases, AB and ABA block copolymers were efficiently formed with styrene and acrylates.     

Block copolymers by transformation of “living” carbocationic into “living” radical polymerization. II. ABA-type block copolymers comprising rubbery polyisobutene middle segment

A general method for the transformation of “living” carbocationic into “living” radical polymerization, without any modification of chain ends, is reported for the preparation of ABA block copolymers. For example, α,ω-difunctional polyisobutene, capped with several units of styrene, Cl-St-PIB-St-Cl, prepared cationically (M_n = 7800, M_w/M_n = 1.31) was used as an efficient difunctional macroinitiator for homogeneous “living” atom transfer radical polymerization to prepare triblock copolymers with styrene, PSt-PIB-PSt (M_n = 28,800, M_w/M_n = 1.14), methyl acrylate, PMA-PIB-PMA (M_n = 31,810, M_w/M_n = 1.42), isobornyl acrylate, PIBA-PIB-PIBA (M_n = 33,500, M_w/M_n = 1.21), and methyl methacrylate, PMMA-PIB-PMMA (M_n = 33,500, M_w/M_n = 1.47). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3595–3601, 1997     

Controlled free radical ring-opening polymerization and chain extension of the “living” polymer

Free radical ring-opening polymerization of 2-methylene-1,3-dioxepane (MDP) in the presence of 2,2,6,6-tetramethyl-1-piperidinyloxy free radical (TEMPO) has been achieved to afford a chain polyester (PMDP) with di-t-butyl peroxide (DTBP) as an initiator at 125°C. The polydispersity of the polymers decreases as the concentration of TEMPO is increased. At high TEMPO concentrations, the polydispersity as low as 1.2 was obtained, which is below the theoretical lower limit for a conventional free radical polymerization. A linear relationship between the number-average molecular weight (M_n) and the monomer conversion was observed with the best-fit line passing very close to the origin of the M_n-conversion plot. The isolated and purified TEMPO-capped PMDP polymers have been employed to prepare chain extended polymers upon addition of more MDP monomer. These results are suggestive of the “living” polymerization process. A possible polymerization mechanism might involve thermal homolysis of the TEMPO-PMDP bonds followed by the addition of the monomers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 761–771, 1998     

A TEMPO-mediated “living” free-radical approach to ABA triblock dendritic linear hybrid copolymers

Dumbbell-shaped ABA triblock copolymers composed of benzyl ether dendrons and polystyrene as the A and B blocks, respectively, were prepared using 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) -mediated “living” free-radical polymerization. A new bis-dendritic unimolecular initiator, compound 3, was employed to study the efficiency of ABA triblock formation under standard TEMPO-mediated polymerization conditions. By this design, the central B block of the ABA triblock copolymer was grown into the bis-dendritic unimolecular initiator. The ABA triblock copolymer products were separated from their by-products, AB diblock copolymers, by column chromatography on silica gel. The isolated copolymers were characterized using gel permeation chromatography and proton nuclear magnetic resonance spectroscopy as complimentary techniques. That the dendritic-linear AB diblock copolymer was obtained in a mixture with ABA triblock material indicates that TEMPO-terminated dendron counter-radical 5 is an imperfect mediator of this free-radical polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3748–3755, 1999     

Ethylene–hexene copolymerization by heterogeneous and homogeneous Ziegler–Natta catalysts and the “comonomer” effect

Homopolymerization of ethylene and 1-hexene and their copolymerizations were compared to investigate the influence of α-olefin on the enhancement of ethylene polymerization rate (R_p), which is often referred to as the “comonomer” effect. With the two homogeneous Ziegler–Natta catalysts, Et[Ind]₂ZrCl₂/MAO and (π-C₅H₅)₂ZrCl₂/MAO (MAO = methylaluminoxane), hexene causes reduction of R_p—in other words a negative “comonomer” effect. In the case of the high activity MgCl₂ supported TiCl₃ catalysts there is a slight positive “comonomer” effect; the R_p increases by 25 to 70% with the addition of 15 mol % of hexene. The “comonomer” effects in there catalyst systems are much smaller than that observed for the classical TiCl₃ catalyst. © 1993 John Wiley & Sons, Inc.     

Effect of initiators,lewis acids,deactivators, additives and medium on controlled/“living” carbocationic systems

Effect of nucleofugacity of leaving group, X, nucleophilicity/basicity of the formed counteranion, X⁻ or MtX_n+1⁻, and groups stabilizing positive charge in the carbocation, R⁺, generated from initiator, RX, as well as metal and ligands in the Lewis acids, MtX_n, strength of protonic acids, HA, added salts, NR₄⁺X⁻, nucleophiles, Nu, some other additives and also reaction conditions on controlled/“living” carbocationic polymerization is discussed. The role of all of the components is explained and their rational design for various monomers which can be polymerized cationically to well defined polymers and copolymers is provided.     

A Symmetry‐Based Concise Formal Synthesis of Platencin,a Novel Lead against “Superbugs”

Quick access : A concise and efficient formal synthesis of platencin has been accomplished in nine steps from a commercially available starting material. The synthesis utilized only one protecting group. The base‐catalyzed Michael cyclization of precursor 1 afforded the key diketone 2 , which was converted into the desired core structure 4 via the radical intermediate 3 .

     

Mechanistic discussion of cationic crosslinking copolymerizations of 1,2‐epoxycyclohexane with diepoxide crosslinkers accompanied by intramolecular and intermolecular chain transfer reactions

Our previous mechanistic discussion of the free‐radical crosslinking monoallyl/diallyl copolymerizations was extended to the cationic crosslinking monoepoxide/diepoxide copolymerizations, typically including 1,2‐epoxycyclohexane (ECH) as a monoepoxide and bis[3,4‐epoxycyclohexylmethyl] adipate (BECHMA) as a diepoxide crosslinker. In the cationic polymerization, oligomer is usually obtained because of the occurrence of characteristic chain‐forming reactions. Therefore, cationic crosslinking monoepoxide/diepoxide copolymerizations could be in the category of the network formation through free‐radical crosslinking monoallyl/diallyl copolymerizations. Thus, the gelation behavior was discussed by comparing the actual gel points with the theoretical ones; the greatly delayed gelation from theory was observed. Then, the resulting network polymer precursors (NPPs) were characterized by SEC‐MALLS‐viscometry to clarify the cationic crosslinking ECH/BECHMA copolymerization mechanism. Notably, the correlation lines of molecular weight versus elution volume were specific for the NPPs obtained at a high conversion close to the gel point as compared with those obtained by the free‐radical crosslinking monoallyl/diallyl copolymerization. This may be ascribed to the occurrence of intramolecular and intermolecular chain transfer reactions characteristic of cationic polymerization; the chain transfer reactions involve the intramolecular and intermolecular nucleophilic attack of ether oxygen or terminal hydroxyl oxygen in the NPPs to a terminal growing cation that leads to the formation of not only the loop‐ but also the crosslink‐structures containing NPPs, providing fragile ultrahigh‐molecular‐weight NPP in the SEC columns. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A “click” approach to ROMP block copolymers

Amphiphilic block copolymers can be conveniently prepared via convergent syntheses, allowing each individual polymer block to be prepared via the polymerization technique that gives the best architectural control. The convergent “click‐chemistry” route presented here, gives access to amphiphilic diblock copolymers prepared from a ring opening metathesis polymer and polyethylene glycol. Because of the high functional group tolerance of ruthenium carbene initiators, highly functional ring opening metathesis polymerization (ROMP) polymer blocks can be prepared. The described synthetic route allows the conjugation of these polymer blocks with other end‐functional polymers to give well‐defined and highly functional amphiphilic diblock copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2913–2921, 2008     

Use of “living” radical polymerizations to study the structural evolution and properties of highly crosslinked polymer networks

Crosslinked polymer networks are used in a wide variety of applications. To use these materials effectively, a fundamental understanding of their structural evolution and the relationship between material properties and structure is essential. In this article, a novel technique employing “iniferters,” i.e., living radical polymerizations, to photopolymerize these networks is utilized to study the property and structural evolution of these highly desirable materials. Living radical polymerizations are used in this work since this technique avoids the problem of carbon radical trapping encountered while using conventional initiators. Dynamic mechanical measurements are performed on highly crosslinked methacrylate networks to glean information regarding their structural heterogeneity. By performing these measurements on homopolymerized samples at various stages of the reaction and on copolymerized samples of multifunctional methacrylates, the mechanical properties are characterized as a function of double bond conversion and comonomer composition. From such analyses, with respect to both temperature and frequency, quantitative conclusions regarding the structure of the networks are drawn. This effort is aimed at exploiting the living radical polymerizations initiated by p-xylylene bis(N,N-diethyl dithiocarbamate) (XDT), to study the mechanical property evolution and structural heterogeneity of crosslinked polymers which is nearly impossible otherwise. Polymers examined in this study include networks formed by homopolymerization of diethylene glycol dimethacrylate (DEGDMA) and polyethylene glycol 600 dimethacrylate (PEG600DMA) as well as copolymers of DEGDMA and PEG600DMA. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 2297–2307, 1997     

A Perylene Bisimide Cyclophane as a “Turn‐On” and “Turn‐Off” Fluorescence Probe

A rigid, covalently linked perylene‐3,4:9,10‐tetracarboxylic acid bisimide (PBI) cyclophane was synthesized by imidization of a bay‐substituted perylene bisanhydride with p‐xylylenediamine. The interchromophoric distance of approximately 6.5 Å establishes an ideal rigid cavity for the encapsulation of large aromatic compounds such as perylene and anthracene with binding constants up to 4.6×10⁴ M ^?1 (in CHCl₃). For electron‐poor guest molecules, the complexation process is accompanied by a significantly increased fluorescence, whereas the emission intensity is dramatically quenched by more electron‐rich guests because of the formation of charge‐transfer complexes. Furthermore, the influence of the PBI core twist on the binding constant results in a remarkable selectivity towards more flexible aromatic guest molecules.     

Random ethene/propene copolymerization from a catalyst system based on a “constrained geometry” half‐sandwich complex

Ethene/propene copolymerizations were performed in solution with a single centre catalyst system composed of a “constrained geometry” half‐sandwich organometallic complex {η¹: η⁵‐[(tert‐butylamido)dimethylsilyl](2,3,4,5‐tetramethyl‐1‐cyclopentadienyl)}titanium dichloride, and methylaluminoxane. The statistical treatment of polymerization data allowed to determine the reactivity ratios for ethene and propene: r_E = 1.35 ± 0.09, r_P = 0.82 ± 0.05, r_Er_P = 1.10 ± 0.14. This catalyst system promotes an almost random distribution of ethene and propene and gives rise to values of r_P and r_E very similar to each other.     

Alternating,gradient, block,and block–gradient copolymers of ethylene and norbornene by Pd–Diimine‐Catalyzed “living” copolymerization

We demonstrate, in this article, the facile synthesis of a broad class of low‐polydispersity ethylene–norbornene (E–NB) copolymers having various controllable comonomer composition distributions, including gradient, alternating, diblock, triblock, and block–gradient, through “living”/quasiliving E–NB copolymerization facilitated with a single Pd – diimine catalyst ( 1 ). This synthesis benefits from two remarkable features of catalyst 1 , its high capability in NB incorporation and high versatility in rendering E–NB “living” copolymerization at various NB feed concentrations ([NB]₀) while under an ethylene pressure of 1 atm and at 15 °C. At higher [NB]₀ values between 0.42 and 0.64 M, E–NB copolymerization with 1 renders nearly perfect alternating copolymers. At lower [NB]₀ values (0.11–0.22 M), gradient copolymers yield due to gradual reduction in NB concentration, with the starting chain end containing primarily alternating segments and the finishing end being hyperbranched polyethylene segments. Through two‐stage or three‐stage “living” copolymerization with sequential NB feeding, diblock or triblock copolymers containing gradient block(s) have been designed. This work thus greatly expands the family of E–NB copolymers. All the copolymers have controllable molecular weight and relatively low polydispersity (with polydispersity index below 1.20). Most notably, some of the gradient and block–gradient copolymers have been found to exhibit the characteristic broad glass transitions as a result of their possession of broad composition distribution. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Alkoxyamine‐mediated “living” radical polymerization: MS investigation of the early stages of styrene polymerization initiated by cumyl‐TEISO

A new series of 1,1,3,3‐tetraethylisoindoline‐2‐oxyl (TEISO)‐based alkoxyamines was prepared. The half‐lives for thermal dissociation indicated that the most sterically congested cumyl‐TEISO alkoxymine had the greatest potential as an initiator for the polymerization of monomers at lower temperatures. The polymerization of styrene at 110 °C gave a linear evolution of M_n with conversion in the early stages. Further evidence for the “living” nature was given by the polydispersities of the polymers that remained low (M_w/M_n = 1.13–1.27) throughout the polymerization (up to 80% conversion). No polymer was formed for the styrene system in a reasonable time below 100 °C. High‐performance liquid chromatographic/mass spectrometric investigations of the distribution of trapped oligomers containing one to nine monomer units formed at 60 °C revealed that the trapping of oligomeric cumyl–styryl radicals by TEISO is irreversible at this temperature. Methyl methacrylate polymerized with cumyl‐TEISO at 60–70 °C, although the initial high rates of polymerization soon decreased to zero at low conversions (10–15%), and the high polydispersities (M_w/M_n = 1.42–1.73) indicated significant side reactions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1232–1241, 2001