Vibrational investigation of 1-cyclopentylpiperazine: A combined experimental and theoretical study

FT-IR and Raman spectra of 1-cyclopentylpiperazine(1cppp)have been experimentally examined in the region of 4000–200cm-1.The optimized geometric parameters,conformational equilibria,normal mode frequencies and corresponding vibrational assignments of 1cppp(C9H18N2)are theoretically examined by means of B3LYP hybrid density functional theory(DFT)method together with 6-31++G(d,p)basis set.On the basis of potential energy distribution(PED)reliable vibrational assignments have been made and the thermodynamics functions,highest occupied and lowest unoccupied molecular orbitals(HOMO and LUMO)of 1cppp have been predicted.Calculations are employed for four different conformations in C1 and Cs point groups of 1cppp in gas phase.Comparison between the experimental and theoretical results indicates that B3LYP method is able to provide satisfactory results for predicting vibrational frequencies and the structural parameters,vibrational frequencies and assignments.Furthermore,C1(equatorial-axial)point group has been found as the most stable conformer of 1cppp.     

Mechanism for the reactions of sulfides and sulfoxides with hypochlorites: racemization and oxygen exchange of oxysulfonium salts and sulfoxides

Density functional theory computations have been performed on the oxidations of sulfides and sulfoxides with hypochlorite ion (OCl^?), hypochlorous acid, and alkyl hypochlorites to study the mechanism of the reactions. The OCl^? anion transforms sulfides to sulfoxides and sulfoxides to sulfones in oxygen transfers. The oxygen atom of QOCl hypochlorites (Q = H, Me, t‐Bu) attacks at the sulfur atom of the substrates, and oxysulfonium cation intermediates are formed; the departure of the leaving Cl^? is catalyzed by soft Lewis acids. The structures of the early transition states are determined by highest occupied molecular orbital–lowest unoccupied molecular orbital interactions. The sulfur compounds are the electron acceptors in the reaction with OCl^?, but they are the electron donors in the reactions with QOCl. The attack of Cl^? at the oxygen atom of oxysulfonium cation intermediates leads to the sulfide and QOCl precursors and can result in racemization, oxygen exchange, and reduction of oxysulfonium salts in reversible reactions. The attack of Cl^? at the sulfur atom of oxysulfonium salts produces λ⁴‐sulfane intermediates. Oxysulfonium cations can be transformed into sulfoxide products with the attack of Cl^? or water at the α‐carbon atom of the O‐alkyl group. The attack of water at the sulfur atom of oxysulfonium cation leads to hydrolysis or oxygen exchange reactions. Racemization and oxygen exchange of sulfoxides proceeds in similar reactions, through the formation of hydroxysulfonium cation intermediates in acidic media in the presence of Cl^?. Chlorosulfonium cations are of very high energy; their intermediacy can be ruled out in the reactions of sulfides with hypochlorites. Copyright © 2012 John Wiley & Sons, Ltd.     

Kinetics and mechanism of (salen)MnIII–catalysed hydrogen peroxide oxidation of alkyl aryl sulphides

The kinetics of (salen)Mn^III complexes catalysed oxidation of aryl methyl and alkyl phenyl sulphides with hydrogen peroxide have been investigated at 25°C in 80% acetonitrile – 20% water spectrophotometrically. The reaction follows first‐order kinetics in (salen)Mn^III complex and zero‐order kinetics in hydrogen peroxide. The order of the reaction with respect to sulphide is fractional and saturation in reaction rate occurs at higher sulphide concentrations. The pseudo first‐order rate constants have been analysed as per Michaelis–Menten kinetics to obtain the values of k₂, the oxidant‐substrate complex decomposition rate constant, and K, the oxidant‐substrate complex formation constant. The effects of nitrogenous bases, free radical inhibitor and changes in solvent composition have also been studied. A suitable mechanism, supported by electronic‐oxidant and electronic‐substrate effect studies, involving a manganese(III)‐hydroperoxide complex as reactive species has been proposed. Copyright © 2007 John Wiley & Sons, Ltd.     

Kinetics and mechanism for the oxidation of anilines by ClO2: a combined experimental and computational study

The oxidation of para‐substituted anilines (X–C₆H₄NH₂, X = –CH₃, –H, –Cl, –NO₂) with chlorine dioxide was studied as a means of eliminating these pollutants. The oxidation rate decreases from that for 4‐methylaniline to that for 4‐nitroanilinem in agreement with the Hammett plot; the oxidation kinetics is second order in aniline and first order in ClO₂, for which a possible mechanism is proposed. Liquid chromatography and gas chromatography mass spectrometry results show that benzoquinone is formed as the major intermediate in aniline/ClO₂ oxidation, and the reaction is pH‐dependent as the rate constant increases with increasing pH. To further support our proposed mechanism, Density Functional Theory (DFT) computations at both B3LYP/6‐311 + G(d,p) level with the polarizable continuum model with an integral equation formalism solvation model (i.e., with water) were carried out, showing that activation energy barriers predict the same reactivity trend as shown by the kinetics experiments. Copyright © 2014 John Wiley & Sons, Ltd.     

A combined experimental and theoretical study of the alkylation of 3,5‐dithioxo‐[1,2,4]triazepines

The chemo‐ and regioselective alkylation reactions of 3,5‐dithioxo[1,2,4]triazepine 1 in a basic medium with α,ω‐dibromoalkanes 2a – c , Br(CH₂)_nBr (n = 1–3), are studied experimentally and theoretically. These alkylations, which occur at the thioxo sulfur atom in position 5, afford mainly 5‐bromomethylthio‐2,7‐dimethyl‐ 2,3‐dihydro‐ 4H[1,2,4]triazepin‐3‐one 3 for n = 1, 6,8‐dimethyl‐5‐thioxo‐2,3,4,5‐tetrahydro‐6H[1,3]thiazolo[4,5‐d][1,2,4]triazepine 4 for n = 2 and 7,9‐dimethyl‐6‐thioxo‐2,3,4,5,6,7‐hexahydro[1,3]thiazino [4,5‐d][1,2,4]triazepine 5 for n = 3. Theoretical calculations have been carried out at the B3LYP/6‐31G* and B3LYP(benzene)/6‐311+G*//B3LYP/6‐31G* levels, in order to rationalize the experimental observations. Both chemo‐ and regio‐selectivities of the alkylation reactions are analyzed. Copyright © 2008 John Wiley & Sons, Ltd.     

H, C NMR and JCH coupling constants investigation of 4-Phenylpyridine: A combined experimental and theoretical study

Proton coupled and uncoupled ¹³C, ¹H, DEPT, COSY and HETCOR NMR spectra of 4-Phenylpyridine (4-Phpy) have been reported for the first time except for its ¹H NMR spectrum. In order to provide a precise structural elucidation for carbon atoms those have very close chemical shifts to each other, the magnitude of ⁿJ_CH (n=1,2,3) coupling constants of 4-Phpy (C₁₁H₉N) have also been investigated. ¹³C, ¹H NMR chemical shifts and ^1-3J_CH coupling constants of 4-Phpy have been calculated by means of B3LYP density functional method with 6-311++G(d,p) basis set. Moreover, the optimized parameters (bond lengths, bond and torsion angles) of 4-Phpy have been calculated with B3LYP at 6-31G(d) level in methanol (ε=32.63). Comparison between the experimental and the theoretical results indicates that density functional B3LYP method is able to provide satisfactory results for predicting NMR properties.     

The molecular basis for the behaviour of niobia species in oxidation reaction probed by theoretical calculations and experimental techniques

This paper describes the preparation and use of a new class of materials based on synthetic niobia as catalysts in the oxidation of organic compounds in aqueous medium. The chemical reactions were carried out in the presence of hydrogen peroxide (H₂O₂). The material was characterized with X-ray diffraction, XPS and H₂-TPR (temperature-programmed reduction) measurements. The organic molecule methylene-blue was used in the decomposition study as a probe contaminant. The analysis using the ESI-MS technique showed complete oxidation observed through different intermediates. This suggests the use of niobia species as an efficient Fenton-like catalyst in degradation reactions. Theoretical quantum DFT calculations were carried out in order to understand the degradation mechanism.     

Raman study of a photochromic diarylethene molecule: a combined theoretical and experimental study

In this paper, the photochromic reaction of the 1,2‐bis(5′‐ethoxy‐2′‐(2″‐pyridyl) thiazolyl) compound (named DE) was studied by ultraviolet–visible absorption and various Raman spectroscopies associated with density functional theory calculations. To explain the growth of the visible absorption spectrum when the compound is irradiated with ultraviolet light, we suggest the existence of several conformations of the colored form. We also studied the vibrational spectroscopic properties of DE in different conditions such as powder, thin solid film, or in gold nanorods colloidal solutions. This compound is found photochromic in all these conditions. The theoretical Raman spectra of the open and closed forms reproduce fairly well the experimental data and help the complete assignment of the observed bands. Copyright © 2013 John Wiley & Sons, Ltd.     

A novel Raman spectroscopic approach to identify polymorphism in leflunomide: a combined experimental and theoretical study

Polymorphism is an important characteristic which affects the activity, solubility and other physical properties of a compound and can be induced by varying temperature, pressure and solvent. The presence and conversion of α to β polymorphic forms of an anti‐rheumatic drug leflunomide have been studied by temperature‐dependent and in situ Raman observations. Both α and β polymorphs were found to co‐exist in the temperature interval 367–372 K. The α form alone exists below 367 K and the β form alone above 373 K. The CO stretching band clearly demonstrates the α → β conversion because of breaking of N–H···O bond and formation of N–H···N bond. On cooling the Raman spectra suggest the irreversibility of this conversion. Thermodynamic stability, crystal parameters and surface morphology of both forms in the leflunomide powder used for the present study have been verified by differential scanning calorimetry, X‐ray powder diffraction and scanning electron microscopy. Copyright © 2015 John Wiley & Sons, Ltd.     

A theoretical investigation on the electronic structures and phosphorescent properties of three heteroleptic iridium(III) complexes with different substituted ancillary groups

Three heteroleptic iridium(III) complexes 1, 2 and 3 bearing two cyclometalating 2′,6′-difluoro-2,3′-bipyridyl (dfpypy) chelates and one pyridyl pyrazolate ligand have been investigated by using the density functional theory/time-dependent density functional theory method to study the influence of the different substituent groups (―CF₃ and ―N(CH₃)₂ moiety on the electronic structures, phosphorescent properties and the organic light-emitting diode performance. The lowest energy absorption wavelength calculated is in good agreement with the experimental value. The lowest energy emissions of complexes 1, 2 and 3 are localised at 454, 534 and 821 nm, respectively. Ionisation potential and electron affinity have been calculated to evaluate the injection abilities of holes and electrons into these complexes. The calculated results show that the different substitute groups affect the charge transfer rate and balance. Finally, we hope that this study can provide a good guide to the future design and synthesis of novel phosphorescent materials for use in the organic light-emitting diodes.     

Mechanistic investigation on the oxidation of ampicillin drug by diperiodatoargentate (III) in aqueous alkaline medium

The kinetics of oxidation of antibiotic drug, ampicillin (AMP) by diperiodatoargentate (III) (DPA) in alkaline medium at a constant ionic strength of 0.25‐mol dm^?3 was studied spectrophotometrically. The reaction between DPA and AMP in alkaline medium exhibits 1:2 stoichiometry (AMP:DPA). The reaction is of first order in [DPA] and has less than unit order in both [AMP] and [alkali]. Added periodate retarded the rate of reaction and intervention of free radicals was observed in the reaction. The oxidation reaction in alkaline medium has been shown to proceed via a DPA–AMP complex, which decomposes slowly in a rate‐determining step followed by other fast steps to give the products. The main products were identified by spot test, IR and NMR studies. The reaction constants involved in the different steps of the mechanism are calculated. The activation parameters with respect to slow step of the mechanism were computed and discussed and thermodynamic quantities were also determined. Copyright © 2008 John Wiley & Sons, Ltd.     

A theoretical study of the regio- and stereoselectivities of non-polar 1,3-dipolar cycloaddition reaction between C-diethoxyphosphoryl-N-methylnitrone and N-(2-fluorophenyl)acrylamide

The 1,3-dipolar cycloadditions (13DC) of C-diethoxyphosphoryl-N-methylnitrone and N-(2-fluorophenyl) acrylamide have been studied using density functional theory (DFT) calculations at B3LYP/6-31G(d) level of theory. Our calculations show that this 13DC reaction takes place with complete ortho regioselectivity with endo stereoselectivity, which favours kinetically the formation of the ortho–endo cycloadduct, in agreement with the experimental observations. The inclusion of solvent effects does not modify the gas-phase selectivities but slightly decreases the reactivity of the reagents. Analysis of the bond order and charge transfer at the transition states indicates that this 13DC reaction takes place via a one-step asynchronous mechanism. Analysis of the DFT global reactivity indices and the Parr functions of the reagents allow us to provide an explanation of the regioselectivity of this 13DC reaction.     

A combined experimental and theoretical analysis of Fe-implanted TiO2 modified by metal plasma ion implantation

Photocatalyst titanium dioxide (TiO₂) thin films were prepared using sol-gel process. To improve the photosensitivity of TiO₂ at visible light, transition metal of Fe was implanted into TiO₂ matrix at 20 keV using the metal plasma ion implantation process. The primary phase of the Fe-implanted TiO₂ films is anatase, but X-ray diffraction revealed a slight shift of diffraction peaks toward higher angles due to the substitutional doping of iron. The additional band gap energy levels were created due to the formation of the impurity levels (Fe-O) verified by X-ray photoelectron spectroscopy, which resulted in a shift of the absorption edge toward a longer wavelength in the absorption spectra. The optical band gap energy of TiO₂ films was reduced from 3.22 to 2.87 eV with an increase of Fe ion dosages from 0 to 1 × 10¹⁶ ions/cm². The band gap was determined by the Tauc plots. The photocatalysis efficiency of Fe-implanted TiO₂ was assessed using the degradation of methylene blue under ultraviolet and visible light irradiation. The calculated density of states for substitutional Fe-implanted TiO₂ was investigated using the first-principle calculations based on the density functional theory. A combined experimental and theoretical Fe-implanted TiO₂ film was formed, consistent with the experimentally observed photocatalysis efficiency of Fe-implanted TiO₂ in the visible region.     

The emission properties of organic field ion emitters: A combined FIM and FI-MS investigation

The emission properties of tungsten emitters activated with benzonitrile, such as are used in analytical organic field ion mass spectrometry, have been investigated using n-heptane as test gas. It was discovered that these emission properties are influenced principally by the morphological structure and electronic state of the surfaces of the microneedles; the bulk structure of these organic agglomerates has practically no effect on their ionization behaviour.Field ion microscope investigation of emitters activated at high temperature (HT) revealed a similar surface structure to that of pyrolytic graphite; emitters activated at room temperature (RT) showed less order. The emission regions of highest electric field strength on the tips of the needles are projecting points, ledges, and in the case of HT-emitters, structure planes.A decrease in the mean emission field strength results from the formation of solid deposits on the needle surfaces. A field corrosion of the needle tips occurs in the presence of high pressures of water and leads also to an irreversible decrease in the mean emission field strength. The effect of physically adsorbed layers on the emission properties of the emitter surface is discussed in terms of the influences of the electric field penetration on the electronic properties of the needles.     

Impact of substituents in the NN ligand on the emission wavelength of Cu(I) complexes: Insight from experimental and theoretical approach

Three mononuclear Cu(I) complexes [Cu(bop)(PPh₃)₂][BF₄], [Cu(fop)(PPh₃)₂][BF₄] and [Cu (pop)(PPh₃)₂][BF₄] were synthesized, where 2-(5-tert-butyl-1,3,4-oxadiazol-2-yl)pyridine (bop), 2-(5-(trifluoromethyl)-1,3,4-oxadiazol-2-yl)pyridine (fop) or 2-(5-phenyl-1,3,4-oxadiazol-2-yl)pyridine (pop) was used as N^∧N chelate ligand and triphenylphosphine was used as ancillary ligand. Several substituents with different electronic effects, such as tert-butyl (t-Bu), trifluoromethyl (CF₃) and phenyl (Ph) groups, were introduced into the 1,3,4-oxadiazole moiety of the N^∧N chelate ligands. The photophysical properties of the complexes were examined by UV-vis absorption and photoluminescence (PL) spectroscopies. The complex [Cu(fop)(PPh₃)₂][BF₄] with a CF₃ group in the N^∧N chelate ligand exhibited the lowest energy absorption and emission band. Electrochemical analyses combined with density functional theory (DFT) calculations established that the introduction of electron withdrawing group (CF₃) decreases the HOMO-LUMO energy gap, and the introduction of electron donating group (t-Bu) into the 1,3,4-oxadiazole moiety has a similar effect on the emission wavelength as that of the introduction of a phenyl group with a π-conjugation.     

A theoretical study on the stability and detonation performance of 2,2,3,3‐tetranitroaziridine (TNAD)

In recent years, there has been a considerable interest in developing high oxygen compounds as oxidizers for, for example, composite explosives. 2,2,3,3‐Tetranitroaziridine (TNAD) is a new designed compound with high oxygen balance (25.11%) and is environmentally friendly. A synthesis route of TNAD was suggested in this study, and the thermodynamic possibilities of reactions were evaluated by the changes in the free energy obtained with the density functional theory (DFT). The strong strain energy (E_s = 292.28 kJ/mol) of TNAD leads the C–C bond in the ring more fragile than the C–NO₂ bond, and the activation energy (E_a) of pyrolysis of the C–C bond (119.14 kJ/mol at the B3LYP/6‐31G* level of DFT) is higher than that of 2,4,6‐trinitrotoluene (TNT) (113.00 kJ/mol). The topological analysis with the contour maps of electron density was used to show the changes of the electron density at the critical points (BCP) in the process of homolysis of the C–C bond. In addition, the energy gap between the frontier orbitals of TNAD (ΔE_g = 5.22 eV) is slightly higher than that of 1,3,3‐trinitroazetidine (TNAZ, 5.06 eV). And the HOMO → LUMO transition plays important roles in the UV spectrum. The noncovalent interactions in the TNAD/RDX composite were estimated to be stronger than that in TNAZ/RDX, that is, the former may have better compatibility than the latter. TNAD/RDX with the weight ratio of w_TNAD/w_RDX = 0.46/0.54 has the wonderful performance (D = 9.14 km/s, P = 37.30 GPa, and I_s = 285.47 s) which is better than that (D = 8.85 km/s, P = 35.09 GPa, and I_s = 272.33 s) of TNAZ/RDX with the same weight ratio. Copyright © 2014 John Wiley & Sons, Ltd.     

过渡金属离子Pt+和甲烷气相反应的势能面研究

采用密度泛函理论（DFT）中的B3LYP方法研究了二重态和四重态Pt+与甲烷反应的机理。通过几何构型优化和频率计算,分别获得三个过渡态,并利用内禀反应坐标（IRC）计算进行了验证。在更高的基组水平上计算了单点能,并详细讨论了二重态和四重态的势能面。结果表明在二重态势能面上的反应具有比较低的能垒,是一个放热反应,所以该反应更易于在二重态上进行。氧化加成生成中间体HPt(CH3)+的步骤需要克服一个小小的能垒。     

A theoretical and experimental study of non-linear absorption properties of substituted 2,5-di-(phenylethynyl)thiophenes and structurally related compounds

Photo-physical properties relevant for optical power limiting in the near-visible and visible regions of the spectrum are reported for a series of substituted diarylalkynyl chalcogenophenes (furans, thiophenes, selenophenes, and tellurophenes). The linear ground and excited state absorption as well as the nonlinear (two-photon) absorption were determined at the time-dependent density functional theory level with use of the hybrid exchange-correlation functionals B3LYP and CAM-B3LYP. A selected number of the theoretically studied molecules were synthesized and characterized experimentally with the use of absorption and luminescence spectroscopy. The photo-physical data are compared to the results from optical power limiting measurements performed in THF solution at a wavelength of 532 nm, with a laser pulse length of 5 ns and pulse energies up to 150 µJ. The best compounds in the present investigation display an energy damping by approximately a factor of 10 at a concentration of 0.010 M.