“Charge transfer” polymerization—and the absence thereof!

Mechanisms for “charge‐transfer” spontaneous polymerizations and cycloadditions between electron‐rich olefins and electron‐poor olefins were reviewed. As for propagation, literature proposals involving charge‐transfer complexes were rejected. Instead, alternating copolymerization is ascribed to polar effects in free‐radical reactions. As for spontaneous initiation, literature proposals involving charge‐transfer complexes, with or without proton transfer, were rejected. Instead, the initiating species is postulated to be a tetramethylene zwitterion biradical, which may initiate either ionic homopolymerization or free‐radical copolymerization. A new hypothesis proposes that any interaction that brings vinyl monomers close together may facilitate tetramethylene formation and spontaneous polymerization. These interactions include Coulombic, acid–base, hydrophobic–hydrophilic and templating–tethering interactions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2069–2077, 2001     

Facile syntheses of 4‐vinyl‐1,2,3‐triazole monomers by click azide/acetylene coupling

Synthetic strategies for the preparation of a new family of vinyl monomers, 4‐vinyl‐1,2,3‐triazoles, have been developed. These monomers are noteworthy as they combine the stability and aromaticity of styrenics with the polarity of vinylpyridines and the structural versatility of acrylate/methacrylate derivatives. To enable the wide adoption of these unique monomers, new methodologies for their synthesis have been elaborated which rely on Cu‐catalyzed azide/acetylene cycloaddition reactions—“click chemistry”—as the key step, with the vinyl substituent being formed by either elimination or Wittig‐type reactions. In addition, one‐pot “click” reactions have been developed from alkyl halides, which allow for monomer synthesis without isolation of the intermediate organic azides. The high yield and facile nature of these procedures has allowed a library of new monomers including the parent compound, 1‐H‐4‐vinyl‐1,2,3‐triazole, to be prepared on large scales. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2897–2912, 2008     

Redox initiated cationic polymerization: Reduction of diaryliodonium salts by 9‐BBN

Diaryliodonium salts undergo facile reduction by the dialkylborane, 9‐BBN. The combination of these two reagents constitutes a redox couple that can be employed as a convenient and versatile initiator system for the cationic polymerizations of styrenic monomers, vinyl ethers and the ring‐opening polymerizations of cyclic ethers and acetals including; epoxides, oxetanes, tetrahydrofuran, and 1,3,5‐trioxane. The polymerizations of these monomers can be carried out in either neat monomer or under solution conditions. Typically, the redox cationic polymerizations of the above monomers are rapid and exothermic. Optical pyrometry (infrared thermography) was employed as a convenient method with which to monitor and optimize the aforementioned redox initiated cationic polymerizations. Studies of the effects of variations in the structure and concentrations of the diaryliodonium salt and 9‐BBN on the polymerizations of various monomers were carried out. A mechanism for the redox cationic initiation of the polymerizations was proposed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5639–5651, 2009     

Study of supramolecular side‐chain and cross‐linking polymers by complexation of various H‐donor acids with H‐acceptor copolymers containing pendent carbazole and fluorescent pyridyl units

Two H‐bonded acceptor (H‐acceptor) homopolymers 14 and 17 were successfully prepared by polymerization of fluorescent pyridyl monomers PBT and PBOT ( 12 and 13 ), which were synthesized via Sonogashira coupling and Wittig‐Horner reactions. To increase the glass transition temperatures as well as reduce the π‐π stacking of the photoluminescent (PL) H‐acceptor copolymers and their H‐bonded polymer complexes, fluorescent monomers 12 and 13 were copolymerized with N‐vinylcarbazole monomer CAZ (23) to produce H‐acceptor copolymers 15–16 and 18–19 . Supramolecular side‐chain and crosslinking polymers (i.e., H‐bonded polymer complexes) obtained by complexation of light‐emitting H‐acceptor polymers 14–19 with various proton donor (H‐donor) acids 20–22 were further characterized by DSC, POM, FTIR, XRD, and PL measurements. The mesomorphic properties can be tuned from the nematic phase in H‐acceptor homopolymers ( 14 and 17 ) to the tilted smectic C phase in their H‐bonded polymer complexes ( 14/20–21 and 17/20–22 ) by the introduction of H‐donor acids (20–22). Moreover, the PL properties of light‐emitting H‐acceptor polymers can be adjusted not only by the central structures of the conjugated pyridyl cores but also by their surrounding nonfluorescent H‐donor acids. In general, redder shifts of PL emissions in H‐bonded polymer complexes occurred when the light‐emitting H‐acceptor polymers were complexed with H‐donors having smaller pKa values. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2734–2753, 2009     

Reactive ligand influence on initiation in phenylene catalyst‐transfer polymerization

Synthesizing conjugated polymers via catalyst‐transfer polymerization (CTP) has led to unprecedented control over polymer sequence and molecular weight. Yet many challenges remain, including broadening the monomer scope and narrowing the molecular weight dispersities. Broad polymer dispersities can arise from nonliving pathways as well as slow initiation. Previously, slow initiation was observed in Ni‐mediated CTP of phenylene monomers. Although precatalysts with faster initiation rates have been reported, the rates still do not exceed propagation. Herein a second‐ and third‐generation of reactive ligands are described, along with a simple method for measuring initiation rates. A precatalyst with an initiation rate that exceeds propagation is now reported, however, the resulting polymer samples still exhibit broad dispersities, suggesting that slow initiation is not the most significant contributing factor in Ni‐mediated phenylene polymerizations. In addition, initiation rates measured under authentic polymerization conditions revealed that both exogenous triphenylphosphine and an ortho‐trifluoroethoxy substituent on the reactive ligand have a strong influence. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1530–1535     

Synthesis and characterization of new low bandgap polyfluorene copolymers for bulk heterojunction solar cells

Two new low bandgap alternating polyfluorene copolymers based on dioctylfluorene and donor‐acceptor‐donor monomers have been synthesized via a Suzuki polymerization reaction. The resulting copolymers have low optical bandgaps at 1.99–1.98 eV. The bulk heterojunction polymer solar cells were fabricated with the conjugated polymers as the electron donor and 6.6‐phenyl C₆₁‐butyric acid methyl ester as the electron acceptor. The power conversion efficiencies of the solar cells based on copolymers 1 and 2 are 0.37 and 0.42%, respectively, under the illumination of AM 1.5, 100 mW/cm². The results indicate that the two copolymers are promising conjugated polymers for polymer solar cells. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5336–5343, 2009     

Synthesis of various stimuli‐responsive gradient copolymers by living cationic polymerization and their thermally or solvent induced association behavior

Stimuli‐responsive gradient copolymers, composed of various monomers, were synthesized by living cationic polymerization in the presence of base. The monomers included thermosensitive 2‐ethoxyethyl vinyl ether (EOVE) and 2‐methoxyethyl vinyl ether (MOVE), hydrophobic isobutyl vinyl ether (IBVE) and 2‐phenoxyethyl vinyl ether (PhOVE), crystalline octadecyl vinyl ether (ODVE), and hydrophilic 2‐hydroxyethyl vinyl ether (HOVE). The synthesis of gradient copolymers was conducted using a semibatch reaction method. Living cationic polymerization of the first monomer was initiated using a conventional syringe technique, followed by an immediate and continuous addition of a second monomer using a syringe pump at regulated feed rates. This simple method permitted precise control of the sequence distribution of gradient copolymers, even for a pair of monomers with very different relative monomer reactivities. The stimuli‐responsive gradient, block and random copolymers exhibited different self‐association behavior. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6444–6454, 2008     

Synthesis,characterization, and properties of regioregular conjugated polymers containing quaterthiophene and an acceptor repeating units

Novel donor–acceptor type polymers consisting of alternating quaterthiophene and an electron withdrawing moiety, pyrazinyl or pyridinyl, have been prepared using Stille coupling approach with moderate yields. The polymers were highly soluble in common organic solvents such as tetrahydrofuran and chloroform. The structure and optical properties of the polymers were characterized by NMR, UV‐vis and fluorescence spectroscopy, and cyclic voltammetry, respectively. The polymer having pyrazine unit exhibited a red‐shift in both absorption and emission in comparison with those analogs containing pyridine because of strong electron withdrawing character of the pyrazinyl group. The polymer containing pyrazinyl as acceptor units also depicted decrease in its optical and electrochemical bandgap relative to those polymers containing 2,5‐ or 2,6‐pyridine moieties. The electrochemical behavior showed facile n‐doping and p‐doping properties of those polymers consisting of alternating quaterthiophene and the acceptor moiety. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2163–2171, 2009     

Synthesis,characterization, and emulsion polymerization of polymerizable coumarin derivatives

We describe the synthesis of a new polymerizable coumarin derivative, [6‐(β‐acryloxyethoxy)‐7‐isopropoxy‐4‐methyl coumarin ( 3 )], whose UV absorption spectrum significantly overlaps the emission spectrum of 9‐alkyl phenanthrene chromophore. This dye can serve several purposes in latex films. It can be a tracer for fluorescence microscopy experiments, or it can act as a donor or acceptor dye in nonradiative energy transfer experiments. Here we emphasize its role as an energy transfer acceptor in experiments with phenanthrene as the corresponding donor. Coumarin‐labeled poly(butyl methacrylate) latex dispersions could be synthesized by conventional batch emulsion polymerization with complete monomer conversion, complete dye incorporation, and uniform dye distribution. Attempts to extend this reaction to poly(vinyl acetate) copolymers failed because the dye inhibited monomer conversion. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3479–3489, 2004     

Effect of lithium perchlorate on the spontaneous copolymerization of 4‐vinylpyridine with various electron‐rich vinyl monomers

The spontaneous copolymerization of 4‐vinylpyridine (4‐VP) activated with lithium perchlorate (LiClO₄) with various electron rich monomers (p‐methoxystyrene, MeOSt; p‐methylstyrene, MeSt; styrene, St) was investigated in various solvent systems at 75°C. Increasing the LiClO₄ concentration and the nucleophilicity of the electron rich monomer increased the copolymer yields. Both ¹H‐NMR and elemental analysis confirmed the almost 1:1 copolymer structure for VP/MeOSt system which possessed high molecular weight and narrow polydispersity (PDI). Compared to 4‐VP activated with zinc chloride, LiClO₄ systems showed slightly lower yields and much narrower PDI. We also investigated the spontaneous copolymerization of 4‐VP activated with various protic acids in the reaction with various electron rich comonomers. However, generally protic salt forms showed less solubility in organic solvents and showed low molecular weight polymer products with low yields. The proposed initiation mechanism exhibits the formation of a σ‐bond between the β‐carbons of the two donor‐acceptor monomers, creating the 1,4‐tetramethylene biradical intermediate initiating the copolymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1709–1716, 1999     

Near‐infrared spectroscopy investigation of water effects on the cationic photopolymerization of vinyl ether systems

Real‐time Fourier transform near‐infrared spectroscopy has been used to monitor monomer and water concentrations simultaneously during cationic vinyl ether photopolymerization. The use of near‐infrared peak area methods allows the water content to be conveniently and nondestructively determined in any monomer or polymer for which the water peak has previously been calibrated by gravimetric analysis. Although the shape of the absorption band due to absorbed water in a monomer changes with the quantity of water, the integrated intensity from about 5350 to 4900 cm^?1 can be correlated directly to the water concentration, and this region is well removed from the vinyl‐based absorption at approximately 6190 cm^?1. This approach provides a highly informative, dynamic technique for examining the influence of moisture on polymerization reactions. Significant differences have been observed in the effects of absorbed water on the cationic photopolymerization kinetics of vinyl ether monomers with or without an ? OH group. Along with the rapid consumption of water coupled to vinyl ether polymerization, acid‐catalyzed hydrolysis reactions have also been spectroscopically observed, giving rise to the formation of aldehyde groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1985–1998, 2004     

Photoinitiating monomers based on di‐ and triacryloylated hydroxylamine derivatives

The purpose of our study was to design a new class of acrylate‐based monomers with an UV‐cleavable heteroatom bond, offering the possibility to initiate radical polymerization upon irradiation with UV‐light. A method to derive the double bond conversion from the ATR‐IR spectra of the monomers and the cured polymers was employed, that enabled us to calculate the theoretical polymerization heats of the new monomers. Their photopolymerization properties were determined by Photo Differential Scanning Calorimetry. Surprisingly, some of these new compounds exhibited high photoinitiation activity, comparable to well‐established Type II photoinitiator systems like benzophenone/triethanolamine. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 392–403, 2009     

Hyperbranched polymers generated from oxyanionic vinyl polymerization of commercially available methacrylate inimers

Hyperbranched polymethacrylates were prepared by means of oxyanionic vinyl polymerization of commercially available monomers, including hydroxyethyl methacrylate (HEMA) and poly(ethylene glycol) methacrylate (PEG‐MA). Hyperbranched polymethacrylates with high molecular weight were obtained with the complex of potassium hydride and 18‐crown‐6 as the initiator. The effect of 18‐crown‐6 is very important, and only oligomer can be obtained in the polymerization without 18‐crown‐6. The molecular structure of the hyperbranched polymers was confirmed with ¹H NMR and ¹³C NMR spectra. The ratio of initiator to monomer significantly affects the architecture of the resultant polymers. When the ratio of initiator to monomer equals 1 in the oxyanionic vinyl polymerization of HEMA, the degree of branching of the resulting polymer was calculated to be around 0.49. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3502–3509, 2005     

Semiconductor nanoparticles for photoinitiation of free radical polymerization in aqueous and organic media

Photoinduced free radical polymerization of vinyl monomers by using semiconductor inorganic nanoparticles (NPs) is investigated. Zinc oxide and iron‐doped zinc oxide were used as photosensitive compounds to initiate the polymerization of acrylamide as a water‐soluble monomer in aqueous environment and methyl methacrylate as an oil‐soluble monomer in organic media under UV‐light irradiation. The method uses photochemically generated electrons and holes from the NPs to form initiating hydroxyl radicals in aqueous media, while tertiary amines and iodonium salt served as coinitiator in organic media. The initiation mechanism in organic media involves hydrogen abstraction or reduction processes via charge carriers, respectively. The kinetic of the polymerization in both environments was studied by means of a photo‐differential scanning calorimetry. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1500–1507     

Polymers from non‐homopolymerizable monomers

There are many inorganic and organic compounds known which are not able to homopolymerize either with well‐known polymerizable monomers or even with other non‐homopolymerizable compounds. The participation of non‐homopolymerizable comonomers with reactivity ratios close to 0 results in copolymers with more or less alternating structure, whereas for a strictly alternating copolymer, both reactivity ratios must be 0. Binary copolymerizations of non‐homopolymerizable and homopolymerizable monomers can give information on the topochemistry, and also on the kinetics of such processes, as in these cases the number of propagating steps is remarkably reduced. Up to now, very little is known on the terpolymerization of three non‐homopolymerizable comonomers. Experimental investigations have shown that only combinations of two monomers with electron donor and one monomer with electron acceptor properties or vice versa yield terpolymers, whereas from three monomers of similar electronic behavior, no terpolymers are obtained. All such terpolymers are of alternating structure where a donor unit is succeeded by an acceptor unit. For copolymerizations of two or three non‐homopolymerizable monomers, two different mechanisms must be considered: the so‐called complex model postulates the incorporation of donor‐acceptor complexes of the monomers into the growing chain, whereas with the terminal or penultimate model the addition of free monomers to growing macroradicals is described. Measurements of the rate of polymerization in combination with determinations of the complex constants of the involved donor and acceptor monomer pairs together with a new kinetic scheme allow us to distinguish between the simultaneous participation of free monomers and complexes in the polymerization process.     

Electrochemical and optical studies of furan and thieno[3,2‐b]thiophene end capped benzotriazole derivatives

Two new 2‐dodecyl benzotriazole (BTz) based donor‐acceptor‐donor (DAD) type polymers were synthesized and characterized in terms of their electrochemical and spectral properties. These DAD type polymers were synthesized electrochemically from furan or thieno[3,2‐b]thiophene (TT) end‐capped BTz monomers. Furan based and thieno[3,2‐b]thiophene based monomers showed monomer oxidations at 1.15 and 1.25 V, respectively, which eased the formation of conducting polymer films without overoxidation. Cyclic voltammetry and spectroelectrochemistry studies showed that both materials are multicolored electrochromic polymers. Results and comparison with properties of other BTz based DAD type polymers are highlighted in detail. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Skewered reactions in free‐radical crosslinking (co)polymerizations of liquid polybutadiene as internal olefinic multivinyl crosslinker

As an extension of our continuing studies concerned with the mechanistic discussion of network formation in the free‐radical crosslinking (co)polymerization of multivinyl monomers, this work refers to the skewered reactions in the crosslinking (co)polymerizations of liquid polybutadiene rubber (LBR) as an internal olefinic multivinyl monomer or crosslinker, especially focused on the competitive occurrence of both addition or skewered reaction to internal carbon–carbon (CC) double bonds and abstraction reaction of allylic hydrogens in LBR by growing polymer radical. Thus, LBR is regarded as an internal olefinic multiallyl monomer‐linked allyl groups (? CH?CH? CH₂? ) with methylene units (? CH₂? ). First, gelation in the polymerization of LBR was explored in detail, especially at elevated temperatures. The occurrence of intermolecular crosslinking was easier in the order LBR > LBR containing 20 mol % of 1,2‐structural units > liquid polyisoprene rubber. Then, we pursued the polymerization of LBR using dicumyl peroxide (DCPO) as typical organic peroxide used at elevated temperatures. The primary cumyloxy radical generated by the thermal decomposition of DCPO may add to CC double bond or abstract allylic hydrogen or undergo β‐scission to generate a secondary methyl radical. The initiation by the cumyloxy radical was omitted. The ratio of allylic hydrogen abstraction to β‐scission reaction was estimated; thus, only 39% of cumyloxy radical was used for the allylic hydrogen abstraction reaction. The addition of methyl radical to CC double bond was clearly observed. Finally, we pursued the intermolecular and intramolecular skewered reactions in free‐radical crosslinking LBR/vinyl pivalate copolymerizations. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Donor–acceptor copolymers for red‐ and near‐infrared‐emitting polymer light‐emitting diodes

We report a comparative study of two organic soluble, vinylene‐based, alternating donor–acceptor copolymers with 1,4‐(2,5‐dihexadecyloxyphenylene) as the donor; the acceptor is either a 2,5‐linked pyridine or a 5,8‐linked 2,3‐diphenylpyrido[3,4‐b]pyrazine. The polymers are synthesized via a Heck coupling methodology from a dihalo monomer and a divinyl monomer to yield number‐average molecular weights of 16,000 g/mol for the pyridine polymer (PPyrPV) and 6500 g/mol for the pyridopyrazine polymer (PPyrPyrPV), with high solubility in common chlorinated solvents and lower solubility in less polar solvents (e.g., tetrahydrofuran). Thin‐film measurements show band gaps of 2.2 and 1.8 eV for PPyrPV and PPyrPyrPV, respectively. Both polymers exhibit photoluminescence in solution and in the solid state and exhibit electroluminescence when incorporated into light‐emitting diodes. In this case, a broad red emission centered at 690 nm for PPyrPV and a near‐infrared emission centered at 800 nm for PPyrPyrPV have been observed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1417–1431, 2005     

End‐group fidelity of copper(0)‐meditated radical polymerization at high monomer conversion: an ESI‐MS investigation

Copper(0)‐mediated radical polymerization (single electron transfer‐living radical polymerization) is an efficient polymerization technique that allows control over the polymerization of acrylates, vinyl chloride and other monomers, yielding bromide terminated polymer. In this contribution, we investigate the evolution of the end‐group fidelity at very high conversion both in the presence and in the absence of initially added copper (II) bromide (CuBr₂). High resolution electrospray‐ionization mass spectroscopy (ESI‐MS) allows determination of the precise chemical structure of the dead polymers formed during the polymerization to very high monomer conversion, including post polymerization conditions. Two different regimes can be identified via ESI‐MS analysis. During the polymerization, dead polymer results mainly from termination via disproportionation, whereas at very high conversion (or in the absence of monomer, that is, post‐polymerization), dead polymers are predominantly generated by chain transfer reactions (presumably to ligand). The addition of CuBr₂ significantly reduces the extent of termination by both chain transfer and disproportionation, at very high monomer conversion and under post‐polymerization conditions, offering a convenient approach to maintaining high end‐group fidelity in Cu(0)‐mediated radical polymerization. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Facile one‐shot synthesis of functional star‐shaped polymers by domino‐type living cationic copolymerization

This article describes the syntheses of various functional star‐shaped polymers via monomer‐selective living cationic polymerization of a vinyl ether (VE) and a divinyl compound with alkoxystyrene moieties by a one‐shot method. An aqueous solution of the resulting star‐shaped polymers with oxyethylene pendants exhibits thermally induced phase separation behavior. To achieve domino synthesis from various monomers, we investigated the optimum reactivity difference using a functional VE and a monofunctional alkoxystyrene. Moreover, the one‐shot copolymerization of a bifunctional VE and an alkoxystyrene is also conducted to yield a star‐shaped polymer via the core‐first method. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2166–2174