Synthesis and properties of nitrogen‐linked poly(2,7‐carbazole)s as hole‐transport material for organic light emitting diodes

A novel class of carbazole polymers, nitrogen‐linked poly(2,7‐carbazole)s, was synthesized by polycondensation between two bifunctional monomers using the palladium‐catalyzed amination reaction. The polymers were characterized by ¹H NMR, Infrared, Gel permeation chromatography, and MALDI‐TOF MS and it was revealed that the combination of the monomer structures is important for producing high molecular weight polymers. Thermal analysis indicated a good thermal stability with high glass transition temperatures, e.g., 138 °C for the higher molecular weight polymer P2 . To pursue the application possibilities of these polymers, their optical properties and energy levels were investigated by UV‐Vis absorption and fluorescence spectra as well as their electrochemical characteristics. Although the blue light emission was indeed observed for all polymers in solution, the quantum yields were very low and the solid films were not fluorescent. On the other hand, the HOMO levels of the polymers estimated from the onset potentials for the first oxidation in the solid thin films were relatively high in the range of ?5.12 to ?5.20 eV. Therefore, light emitting diodes employing these polymers as a hole‐transport layer and iridium(III) complex as a triplet emitter were fabricated. The device of the nitrogen‐linked poly(2,7‐carbazole) P3 with p,p′‐biphenyl spacer, which has a higher HOMO level and a higher molecular weight, showed a much better performance than the device of P2 with m‐phenylene spacer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3880–3891, 2009     

Efficient blue‐green‐emitting poly[(5‐diphenylamino‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] derivatives: Synthesis and optical properties

New poly(phenylene vinylene) derivatives with a 5‐diphenylamino‐1,3‐phenylene linkage (including polymers 2 , 3 , and 5 ) have been synthesized to improve the charge‐injection properties. These polymers are highly photoluminescent with fluorescent quantum yields as high as 76% in tetrahydrofuran solutions. With effective π‐conjugation interruption at adjacent m‐phenylene units, chromophores of different conjugation lengths can be incorporated into the polymer chain in a controllable manner. In polymer 2 , the structural regularity leads to an isolated, well‐defined emitting chromophore. Isomeric polymer 3 of a random chain sequence, however, allows the effective emitting chromophores to be joined in sequence by sharing a common m‐phenylene linkage (as shown in a molecular fragment). Double‐layer light‐emitting‐diode devices using 2 , 3 , and 5 as emitting layers have turn‐on voltages of about 3.5 V and produce blue‐green emissions with peaks at 493, 492, and 482 nm and external quantum efficiencies up to 1.42, 0.98, and 1.53%, respectively. In comparison with a light‐emitting diode using 2 , a device using 3 shows improved charge injection and displays increased brightness by a factor of ～3 to 1400 cd/m² at an 8‐V bias. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2307–2315, 2006     

Synthesis and characterization of new blue‐light‐emitting polymers based on PPP and PPV having fluorene pendant at vinyl bridge

The new poly(arylene vinylene) derivatives, which are composed of biphenylene vinylene phenylene vinylene, biphenylene vinylene m‐phenylene vinylene, terphenylene vinylene phenylene vinylene, and terphenylene vinylene m‐phenylene vinylene as backbone and bulky fluorene pendants at each vinyl bridge, were designed, synthesized, and characterized. The obtained polymers showed weight‐average molecular weights of 11,100–39,800 with polydispersity indexes ranging from 1.5 to 2.1. The resulting polymers were amorphous with high thermal stability and readily soluble in common organic solvents. The obtained polymers showed blue emission (λ_max = 456–475 nm) in PL spectra, and polymer 4 containing terphenylene vinylene m‐phenylene vinylene showed the most blue shifted blue emission (λ_max = 456 nm). The double layer light‐emitting diode devices fabricated by using obtained polymers as emitter emitted bright blue light. The device showed turn on voltage around 6.5 V and brightness of 70–250 cd/m². © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4923–4931, 2006     

Poly(ortho‐phenylene ethynylene)s: Synthetic accessibility and optical properties

Poly(ortho‐phenylene ethynylene)s (PoPEs) have been synthesized via an in situ activation/coupling AB′ polycondensation protocol. The resulting polymers have been characterized by several analytical methods and are shown to have no structural defects. Although the Sonogashira–Hagihara polycondensation reaction is less efficient than for the preparation of the corresponding meta‐ and para‐linked polymers, presumably because of steric hindrance caused by the ortho substituents, the process can be accelerated by the use of microwave irradiation. Optical spectroscopy indicates solvent‐dependent conformational changes between extended transoid and helical cisoid conformations, providing the first experimental evidence for solvophobically driven folding of the PoPE backbone. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1619–1627, 2006     

Synthesis and properties of new orange red light‐emitting hyperbranched and linear polymers derived from 3,5‐dicyano‐2,4,6‐tristyrylpyridine

Two new orange red light‐emitting hyperbranched and linear polymers, poly(pyridine phenylene)s P1 and P2, were prepared by the Heck coupling reaction. In particular, an A₂ + B₃ approach was developed to synthesize conjugated hyperbranched polymer P2 via one‐pot polycondensation. The polymers were characterized by NMR, Fourier transform infrared, ultraviolet–visible, and elemental analysis. They showed excellent solubility in common solvents such as tetrahydrofuran, CH₂Cl₂, CHCl₃, and N,N‐dimethylformamide and had high molecular weights (up to 6.1 × 10⁵ and 5.8 × 10⁵). Cyclic voltammetry studies revealed that P2 had a low‐lying lowest unoccupied molecular orbital energy level of ?3.22 eV and a highest occupied molecular orbital energy level of ?5.43 eV. The thin film of P2 emitted strong orange‐red photoluminescence at 595 nm. A double‐layer light‐emitting diode fabricated with the configuration of indium tin oxide/P2/tris(8‐hydroxy‐quinoline)aluminum/Al emitted orange‐red light at 599 nm, with a brightness of 662 cd/m² at 7 V and a turn‐on voltage of 4.0 V; its external quantum efficiency was calculated to be 0.19% at 130.61 mA/cm². This indicated that this new electroluminescent polymer (P2) based on 3,5‐dicyano‐2,4,6‐tristyrylpyridine could possibly be used as an orange‐red emitter in polymer light‐emitting displays. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 493–504, 2005     

Synthesis of dendronized,chiral conjugated polymers with appendant Fréchet‐type dendrons

New chiral binaphthyl‐based polyarylenes [(S)‐ 3a and (S)‐ 3b ] with appendant Fréchet‐type poly(aryl ether) dendrons (first generation and second generation) were synthesized with Suzuki polycondensation from chiral (S)‐6,6′‐dibromo‐2,2′‐didendron‐substituted 1,1′‐binaphthyl derivatives and p‐phenylene diboronic acid. The polymers were studied with circular dichroism, fluorescence, and ultraviolet–visible spectra. Laser light scattering measurements of (S)‐ 3a and (S)‐ 3b showed that their weight‐average molecular weights were 2.39 × 10⁵ and 1.09 × 10⁴, respectively. The specific optical rotation [α]_D was ?59.6 for (S)‐ 3a and ?62.7 for (S)‐ 3b . These dendronized conjugated polymers exhibited good thermal stability. The glass‐transition temperatures and the initial decomposition temperatures were 187.5 and 265.3 °C for (S)‐ 3a and 173.8 and 308.9 °C for (S)‐ 3b , respectively. (S)‐ 3a and (S)‐ 3b had high fluorescence quantum efficiencies, 87 and 91%, respectively, in tetrahydrofuran. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1167–1172, 2002     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Synthesis and properties of conjugated polymers containing 3,9‐carbazolylene and silylenevinylene moieties in the main chain

Novel conjugated polymers containing 3,9‐carbazolylene and silylenevinylene moieties were synthesized by the hydrosilylation polymerization of 1,4‐bis(3‐ethynyl‐9‐carbazolyl)benzene ( 1 ) with various bis(hydrosilane)s or dihydrosilanes using a rhodium catalyst. Polymers with weight‐average molecular weights ranging from 5400 to 20,000 were obtained in 55–97% yields by the polyaddition with a rhodium catalyst in toluene at 25 °C for 24 h. All the polymers were soluble in CHCl₃ and THF, and had predominantly trans‐structures. The polymers exhibited λ_max at a longer wavelength region than 1 , and emitted fluorescence in 14–50% quantumn yields. The polymers were oxidized and reduced in the region of 0.4–1.6 V, and thermally stable up to 200 °C under air. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1815–1821, 2010     

Grignard condensation routes to 1,3‐disilacyclobutane‐containing cyclolinear polycarbosilanes

Alkylene‐ and arylene‐bridged cyclolinear polycarbosilanes (CLPCS) with 1,3‐disilacyclobutane (DSCB) rings incorporated in the main chain of the polymer were prepared by polycondensation between corresponding di‐functional DSCB derivatives and di‐Grignard reagents. Well‐defined, low molecular weight (M_n = 3–5K; DP = 17–26), hexylene‐ and phenylene‐bridged CLPCS polymers were obtained without appreciable ring opening of the DSCB rings. Large exothermic peaks were observed in the DSC for these CLPCSs, which indicated, along with the IR spectra, that crosslinking occurred on heating to about 250 °C via the ring opening of the embedded, alternating, DSCB rings. Moreover, PB‐CLPCS undergoes photochemically induced crosslinking on UV irradiation to form crosslinked polycarbosilane network films. The spin‐cast, cured, films of these CLPCSs exhibit relatively low dielectric constants and promising thermal and mechanical properties for applications in electronics, for example, directly UV‐photoimprinted low‐k dielectrics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1547–1557     

Synthesis of through‐space conjugated polymers containing [2.2]paracyclophane and thieno[3,4‐b]pyrazine in the main chain

We synthesized through‐space conjugated polymers with [2.2]paracyclophane and thieno[3,4‐b]pyrazine units in the main chain by the Sonogashira–Hagihara coupling reaction. The obtained polymers were soluble in common organic solvents, and homogeneous thin films were readily obtained from the polymer solutions by spin‐coating techniques. The polymers exhibited the extension of the conjugation length via the through‐space interaction. The polymers showed orangish‐red emission with peak maxima of around 610 nm in diluted solutions and their thin films, which were derived from the thieno[3,4‐b]pyrazine moieties. The optical and electrochemical behaviors of the polymers containing pseudo‐para‐ and pseudo‐ortho‐linked [2.2]paracyclophane were identical. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Novel blue‐greenish electroluminescent poly(fluorenevinylene‐alt‐dibenzothiophenevinylene)s and their model compounds

Poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐2,8‐vinylene) (PS) and poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐5,5‐dioxide‐2,8‐ vinylene) (PSO) as well as corresponding model compounds were synthesized by Heck coupling. Both the polymers and model compounds were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. The polymers showed a decomposition temperature at ～430 °C and a char yield of about 65% at 800 °C in N₂. The glass‐transition temperatures of the polymers were almost identical (75–77 °C) and higher than those of the model compounds (26–45 °C). All samples absorbed around 390 nm, and their optical band gaps were 2.69–2.85 eV. They behaved as blue‐greenish light emitting materials in both solutions and thin films, with photoluminescence emission maxima at 450–483 nm and photoluminescence quantum yields of 0.52–0.72 in solution. Organic light‐emitting diodes with an indium tin oxide/poly(ethylene dioxythiophene):poly(styrene sulfonic acid)/polymer/Mg:Ag/Ag configuration with polymers PS and PSO as emitting layers showed green electroluminescence with maxima at 530 and 540 nm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6790–6800, 2006     

Chemical synthesis of poly‐γ‐glutamic acid by polycondensation of γ‐glutamic acid dimer: Synthesis and reaction of poly‐γ‐glutamic acid methyl ester

α‐Methyl glutamic acid (L ‐L )‐, (L ‐D )‐, (D ‐L )‐, and (D ‐D )‐γ‐dimers were synthesized from L ‐ and D ‐glutamic acids, and the obtained dimers were subjected to polycondensation with 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride and 1‐hydroxybenzotriazole hydrate as condensation reagents. Poly‐γ‐glutamic acid (γ‐PGA) methyl ester with the number‐average molecular weights of 5000∼20,000 were obtained by polycondensation in N,N‐dimethylformamide in 44∼91% yields. The polycondensation of (L ‐L )‐ and (D ‐D )‐dimers afforded the polymers with much larger |[α]_D | compared with the corresponding dimers. The polymer could be transformed into γ‐PGA by alkaline hydrolysis or transesterification into α‐benzyl ester followed by hydrogenation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 732–741, 2001     

Synthesis and characterization of fluorescent poly[fluorene‐co‐phenylene‐1‐(di‐2‐pyridylamine)] copolymer and its Ru(II) complex

2,2′‐dipyridylamine substituted poly(fluorene‐co‐phenylene) copolymers with different concentrations of dipyridylamine have been synthesized by Suzuki polycondensation. These polymers were found to be soluble in organic solvents such as tetrahydrofuran, chloroform, and dimethylformamide. The photoluminescence of the copolymer was slightly blueshifted as the concentration of dipridylamine was increased. The introduction of dipyridylamine and the ruthenium complex into the polymer significantly improved the photoluminescence efficiency. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4838–4846, 2004     

Poly‐(p‐phenylene vinylenes) with pendent 2,4‐difluorophenyl and fluorenyl moieties: Synthesis,characterization, and device performance

To improve efficiency, processability, and stability, three novel poly‐(p‐phenylene vinylenes) (PPVs) derivatives ( P _a , P _b , and P _c ) with pendent 2,4‐difluorophenyl and fluorenyl moieties were synthesized via Gilch reaction. Their structures were characterized by ¹H NMR, ¹³C NMR, and ELEM. ANAL . Compared with those of PPV and MEH‐PPV, the absolute quantum efficiencies of these polymers showed remarkable improvement (measured at 38.7, 37.2, and 20.3%, respectively), which can be attributed to the presence of twisted multiaryl segments and fluorine atoms. TGA revealed that the inflection temperatures of their thermal decomposition curves were above 400 °C. Double‐layered electroluminescent devices with these polymers as light‐emitting layers [ITO/PEDOT:PSS/Polymer/Ba/Al] showed peak emissions at 493/515, 503, and 600 nm and maximum luminance of 2700, 450, and 4700 cd/m² for P _a , P _b , and P _c , respectively, with onset voltages of ～4 V. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2500–2508, 2009     

Aromatic poly(1,3,4‐oxadiazole)s and poly(amide‐1,3,4‐oxadiazole)s containing ether sulfone linkages

Polyhydrazides and poly(amide‐hydrazide)s were prepared from two ether‐sulfone‐dicarboxylic acids, 4,4′‐[sulfonylbis(1,4‐phenylene)dioxy]dibenzoic acid and 4,4′‐[sulfonylbis(2,6‐dimethyl‐1,4‐phenylene)dioxy]dibenzoic acid, or their diacyl chlorides with terephthalic dihydrazide, isophthalic dihydrazide, and p‐aminobenzhydrazide via a phosphorylation reaction or a low‐temperature solution polycondensation. All the hydrazide polymers were found to be amorphous according to X‐ray diffraction analysis. They were readily soluble in polar organic solvents such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylacetamide and could afford colorless, flexible, and tough films with good mechanical strengths via solvent casting. These hydrazide polymers exhibited glass‐transition temperatures of 149–207 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the solid state at elevated temperatures. Although the oxadiazole polymers showed a significantly decreased solubility with respect to their hydrazide prepolymers, some oxadiazole polymers were still organosoluble. The thermally converted oxadiazole polymers had glass‐transition temperatures of 217–255 °C and softening temperatures of 215–268 °C and did not show significant weight loss before 400 °C in nitrogen or air. For a comparative study, related sulfonyl polymers without the ether groups were also synthesized from 4,4′‐sulfonyldibenzoic acid and the hydrazide monomers by the same synthetic routes. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2271–2286, 2001     

Synthesis and characterization of new soluble poly(amide‐imide)s derived from 2,2‐bis[4‐(4‐trimellitimidophenoxy)phenyl]hexafluoropropane

A series of new soluble poly(amide‐imide)s were prepared from the diimide‐dicarboxylic acid 2,2‐bis[4‐(4‐trimellitimidophenoxy)phenyl]hexafluoropropane with various diamines by direct polycondensation in N‐methyl‐2‐pyrrolidinone containing CaCl₂ with triphenyl phosphite and pyridine as condensing agents. All the polymers were obtained in quantitative yields with inherent viscosities of 0.52–0.86 dL · g^?1. The poly(amide‐imide)s showed an amorphous nature and were readily soluble in various solvents, such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide, pyridine, and cyclohexanone. Tough and flexible films were obtained through casting from DMAc solutions. These polymer films had tensile strengths of 71–107 MPa and a tensile modulus range of 1.6–2.7 GPa. The glass‐transition temperatures of the polymers were determined by a differential scanning calorimetry method, and they ranged from 242 to 279 °C. These polymers were fairly stable up to a temperature around or above 400 °C, and they lost 10% of their weight from 480 to 536 °C and 486 to 537 °C in nitrogen and air, respectively. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3498–3504, 2001     

Novel fluorescent (p‐phenylene ethynylene)‐calix[4]arene‐based polymer: Design,synthesis, and properties

A novel fluorescent (p‐phenylene ethynylene)‐calix[4]arene‐based polymer ( CALIX‐PPE ) has been successfully synthesized by cross‐coupling polymerization of bis‐calix[4]arene 1 with 1,4‐diethynylbenzene. The polycondensation was carried out in toluene/NEt₃ at 35 °C for 24 h, using PdCl₂(PPh₃)₂/CuI as the catalytic system, furnishing CALIX‐PPE in excellent isolated yields (higher than 95%, several runs). The yellow polymer is freely soluble in several nonprotic organic solvents. The GPC trace of the isolated polymer showed a monomodal distribution and a number‐average molecular weight of 23,300 g mol^?1 (M_w/M_n = 2.05). No evidence was found in the structural analysis (FTIR and ¹H/¹³C NMR) regarding the formation of alkyne homocoupled segments along the polymer chain. For comparative purposes, the synthesis of an analogous poly(p‐phenylene ethynylene) containing p‐t‐butyl‐phenoxymethyl side chains ( TBP‐PPE ) was also undertaken. A great similarity was found between the photophysical properties of CALIX‐PPE and TBP‐PPE in solution (UV–vis and laser induced luminescence), clearly demonstrating their unique dependence on the structure and conformation of the conjugated PPE backbone. The fluorescence spectra of polymers are of nearly identical shape, displaying their maximum emission around 420 nm. The calculated solution photoluminescence quantum yields of CALIX‐PPE and TBP‐PPE are of similar magnitude (?_{F( CALIX‐PPE )} = 0.43; ?_{F( TBP‐PPE )} = 0.51). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6477–6488, 2008     

Facile synthesis of ortho‐Phenylene‐based conjugated polymers through transformation of cross‐conjugated poly(2,3‐diaryl[2]dendralene)s and their optical properties

We studied the facile synthesis of ortho‐phenylene‐based conjugated polymers through transformation of cross‐conjugated polymers having [2]dendralene moiety, poly(2,3‐diaryl[2]dendralene)s ( P1 s), and demonstrated the sequential synthesis of (Z)‐alkene‐ and ortho‐arylene‐containing conjugated polymers from P1 s. P1 s were transformed into cyclohexa‐1,4‐diene‐containing conjugated polymers ( P2 s) through a Diels–Alder reaction. Aromatization of the cyclohexa‐1,4‐diene skeleton was achieved by using 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone to give the ortho‐phenylene‐containing conjugated polymers ( P3 s). The ultraviolet–visible and fluorescence spectra of the cross‐conjugated polymers P1 s, and the conjugated polymers P2 s and P3 s indicated that the π–π interactions between the arylene moieties in P2 s were stronger than those in P1 s and P3 s. The synthetic method for P2 s and P3 s offers an effective synthesis of various types of (Z)‐alkene‐ and ortho‐arylene‐containing conjugated polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 827–832     

Alternating copolymers of 2,6‐bis(p‐dihexylaminostyryl)anthracene‐9,10‐diyl and N‐octylcarbazole with large two‐photon cross sections

We report the synthesis, thermal, one‐ and two‐photon properties of poly(2,6‐bis(p‐dihexylaminostyryl)anthracene‐9,10‐diyl‐alt‐N‐octylcarbazole‐3,6‐/2,7‐diyl) ( P1/P2 ). The as‐synthesized polymers exhibit number‐average molecular weights of 1.7 × 10⁴ for P1 and 2.1 × 10⁴ g/mol for P2 . They emit strong one‐ and two‐photon excitation fluorescence with the peak around 502 nm, and the fluorescence quantum yields around 0.76 in chloroform. In film state, P1 and P2 show different red‐shift emission with the peaks at 512 nm and 523 nm, respectively. The DSC measurement reveals that as‐synthesized polymers are all amorphous aggregates with the glass transition temperatures of 131 °C for P1 and 152 °C for P2 . The solution two‐photon absorption (TPA) properties of P1 and P2 in chloroform are measured by the two‐photon‐induced fluorescence method using femtosecond laser pulses (120 fs). The TPA cross sections (δ) are measured over the range of 700–900 nm. The maximal δ of P1 and P2 all appear at ～800 nm and are 1010 GM and 940 GM per repeating unit, respectively. This suggests that no notable interactions among structure units that impair their fluorescence and TPA properties, and the polymers with large δ can be obtained by using the high TPA‐active units as building blocks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and properties of polyimides derived from 1,4‐bis(4‐aminophenoxy)‐2‐(6‐oxido‐6H‐dibenz[c,e] [1,2]oxaphosphorin‐6‐yl) phenylene

A new phosphorus‐containing aromatic diamine, 1,4‐bis(4‐aminophenoxy)‐2‐(6‐oxido‐6H‐dibenz[c,e] [1,2]oxaphosphorin‐6‐yl) phenylene ( 3 ) was synthesized by the nucleophilic aromatic substitution of 2‐(6‐oxido‐6H‐dibenz[c,e] [1,2]oxaphosphorin‐6‐yl)‐1,4‐dihydroxy phenylene ( 1 ) with 4‐fluoronitrobenzene, followed by catalytic hydrogenation. Light color, flexible, and creasable polyimides with high molecular weight, high glass transition, high thermal stability, improved organosolubility, and good oxygen plasma resistance were synthesized from the condensation of ( 3 ) with various aromatic dianhydrides in N,N‐dimethylacetamide, followed by thermal imidization. The number‐average molecular weights of polyimides are in the range of 7.0–8.3 × 10⁴ g/mol, and the weight‐average molecular weights are in the range of 12.5–16.5 × 10⁴ g/mol. The T_gs of these polyimides range from 230 to 304 °C by differential scanning calorimetry and from 228 to 305 °C by DMA. These polyimides are tough and flexible, with tensile strength at around 100 MPa. The degradation temperatures (T_d 5%) and char yields at 800 °C in nitrogen range from 544 to 597 °C and 59–65 wt %, respectively. Polyimides 5c and 5e , derived from OPDA and 6FDA, respectively, with the cutoff wavelength of 347 and 342 μm, respectively, show very light color. These polyimides also exhibit good oxygen plasma resistance. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2897–2912, 2007