We propose a theory of thin film photovoltaics in which one of the polycrystalline films is made of a pyroelectric material grains such as CdS. That film is shown to generate strong polarization improving the device open circuit voltage. Implications and supporting facts for the major photovoltaic types based on CdTe and CuIn(Ga)Se2 absorber layers are discussed.
Epitaxial TiC/SiC multilayers were grown by magnetron sputtering at a substrate temperature of 550 °C, where SiC is normally amorphous. The epitaxial TiC template induced growth of cubic SiC up to a thickness of ～2 nm. Thicker SiC layers result in a direct transition to growth of the metastable amorphous SiC followed by renucleation of nanocrystalline TiC layers.
We demonstrate by a Monte Carlo simulation that the reflection of quasi‐ballistically accelerated electrons at the interfaces of an In0.52Al0.48As/In0.53Ga0.47As/In0.52Al0.48As double‐heterojunction structure is able to generate current oscillations at frequencies in the THz range. The possibility of taking advantage of this mechanism to generate THz signals has been demonstrated in structures with well dimension close to the electron ballistic transport length in In0.53Ga0.47As.
Spin crossover compounds are considered to be a viable alternative for creating display, memory and switching devices due to the bistability of their magnetic, optical, mechanical and electrical properties. This Letter presents the study of the dielectric and transport properties of the [Fe(Htrz)2(trz)](BF4) (Htrz = 1H‐1,2,4‐triazole) complex in a wide temperature and frequency range. Our results reveal a singular behavior of the dielectric modulus upon the spin transition in conjunction with the switching of the conductivity between the high spin and low spin states.
In this Letter we demonstrate that hydrogen‐terminated porous silicon (PSi) layers and powders can serve as highly efficient reductive templates for noble metal salts. The reduction results in metal nanoparticle (NP) formation in the pores of PSi. Gold NP formation has been monitored in‐situ by measuring the plasmon resonance response. Pt NPs, formed in the PSi matrix, were investigated by transmission electron microscopy and energy‐dispersive X‐ray analysis. Furthermore, hybrid Pt/PSi nanocomposites exhibit a high catalytic activity for CO oxidation.
By means of first‐principles calculations we predict the stability of silicene as buckled honeycomb lattice on passivated substrates of group‐IV(111)1 × 1 surfaces. The weak van‐der‐Waals interaction between silicene and substrates does not destroy its linear bands forming Dirac cones at the Brillouin zone corners. Only very small fundamental gaps are opened around the Fermi level.
Osmium diboride has been known for some time as a low compressibility material and a superhard material. It is suitable for hard coating applications. It is also a superconductor below 2.1 K. Using first‐principles calculations, the author investigated the geometry of its Fermi surface (FS) and calculated the related physical quantities. The theoretical results are used to predict the frequencies of the Shubnikov–de Haas quantum oscillations. Comparison with recent measurements of the magneto‐resistance oscillations in osmium diboride is made.
We have shown that nitrophenyl groups may be added to the surface of few‐layer epitaxial graphene (EG) by the formation of covalent carbon–carbon bonds thereby changing the electronic structure and transport properties of EG from near‐metallic to semiconducting. In the present Letter we discuss the opportunities afforded by such chemical processes to engineer device functionality in graphene by modification of the electronic properties without physical patterning.
Interaction between negatively charged Nafion® and a positively charged polybenzimidazole‐decorated carbon nanotube leads to the formation of an ionic complex with high charge density for proton conduction, which can lead to an improvement in transport properties. Here we investigate the high‐temperature and low‐humidity proton conductivity of this nanocomposite membrane as a potential membrane for fuel cell applications.
In the present work we use a series of Ti–Ru alloys, with minor amounts of Ru (0.01, 0.02, 0.05 and 0.2 at%) to grow anodic self‐organized Ru‐doped TiO2 nanotube layers. When used in dye‐sensitized solar cells (DSSCs), the nanotube layers with an optimum amount of Ru (0.02 at% Ru in the alloy) show a considerable increase in solar cell efficiency (η = 5.2%) under AM1.5 (100 mW/cm2) conditions compared with non‐doped TiO2 nanotubes (η = 4.3%).
The possibility of multiferroicity arising from charge ordering in LuFe2O4 and structurally related rare earth ferrites is reviewed. Recent experimental work on macroscopic indications of ferroelectricity and microscopic determination of coupled spin and charge order indicates that this scenario does not hold. Understanding the origin of the experimentally observed charge and spin order will require further theoretical work. Other aspects of recent research in these materials, such as geometrical frustration effects, possible electric‐field‐induced transitions, or orbital order are also briefly treated.
An original approach is proposed to study the magnetic phase separation phenomenon. It is based on the registration of the noise‐like FMR Fine Structure (FMR FS) caused by the magnetic interparticle dipole–dipole interaction between spatially separated ferromagnetic regions. Data obtained for a La0.7Pb0.3MnO3 single crystal point to the existence of spatially separated ferromagnetic regions. It is shown that FMR FS of the La0.7Pb0.3MnO3 single crystal is temperature reversible and disappears at the maximum of magnetoresistance.
We demonstrate the fabrication of a solid state heterojunction photovoltaic device with solution‐processed graphene oxide (GO) and n‐Si. Partially reduced GO with a high optical gap (2.8 eV) was spin‐coated on the n‐Si substrate and a heterojunction device was fabricated with the structure of Au/pr‐GO/n‐Si. In the fabricated device, incident light was transmitted through the thin GO film to reach the junction interface, generating photoexciton, and thereby a photovoltaic action was observed. By means of a built‐in electric potential at the GO/n‐Si junction, photoexcited electrons and holes can be separated, transported and collected at the electrodes.
Optically transparent and high‐quality hybrid ZnO nanoparticle and anthracene embedded polyphenylsiloxane (PPS) glass films were spin‐coated on quartz substrates. A strong Förster resonant energy transfer (FRET) process was indicated by the observation of quenching of the ZnO emission and an enhancement of the anthracene emission at room temperature. The efficiency of this energy transfer between ZnO and the S1 vibronic states of the anthracene molecules can be optimized to exceed 90%.
Heteroepitaxial growth of kesterite Cu2ZnSnS4 (CZTS) thin film on cubic ZnS(100) single crystal substrate was achieved by radio frequency magnetron sputtering from a single CZTS target. An optimal substrate temperature in the range of 470–500 °C is found suitable for this epitaxial growth. The growth of CZTS was confirmed to be along a‐axis. The sputtered CZTS thin film is homogeneous throughout the whole film. The band gap of the film is found to be approximately 1.51 eV, i.e., promising for high efficiency thin film solar cells.
We demonstrate the monolithic integration of a microstructured organic photodiode with a planar optical stripe waveguide. The manufacturing of this waveguide‐integrated organic photodiode is based on an UV photolithography process. The integration of photodiodes with optical waveguides represents an essential building block in the field of optoelectronic‐photonic integrated circuits.
Angle‐resolved photoemission spectroscopy (ARPES) and X‐ray photoemission spectroscopy have been used to characterise epitaxially ordered graphene grown on copper foil by low‐pressure chemical vapour deposition. A short vacuum anneal to 200 °C allows observation of ordered low energy electron diffraction patterns. High quality Dirac cones are measured in ARPES with the Dirac point at the Fermi level (undoped graphene). Annealing above 300 °C produces n‐type doping in the graphene with up to 350 meV shift in Fermi level, and opens a band gap of around 100 meV.
We present a simplified process sequence for the fabrication of large area n‐type silicon solar cells. The boron emitter and full area phosphorus back surface field are formed in one single high temperature step using doped glasses deposited by plasma enhanced chemical vapour deposition (PECVD) as diffusion sources. By optimizing the gas composition during the PECVD process, we not only prevent the formation of a boron rich layer (BRL), but also achieve doping profiles that exhibit a low dark saturation current density while allowing for contact formation by screen printing. The presented co‐diffusion process allows for major process simplification compared to the state of the art diffusion process relying on multiple high temperature processes, masking and wet chemistry steps.
We report the fabrication procedure and the characterization of an Al0.3Ga0.7As solar cell containing high‐density GaAs strain‐free quantum dots grown by droplet epitaxy. The production of photocurrent when two sub‐bandgap energy photons are absorbed simultaneously is demonstrated. The high quality of the quantum dot/barrier pair, allowed by the high quality of nanostructured strain‐free materials, opens new opportunities for quantum dot based solar cells.
