Layer‐by‐layer fabrication of hierarchical structures in sol–gel templated thin titania films

The fabrication of titania nanostructures with hierarchical order of different structural levels is investigated. The nanostructures are prepared with a diblock‐copolymer assisted sol–gel process. By iterative spin‐coating of the solution onto silicon substrates a thin polymer‐nanocomposite film is deposited and transformed to purely anatase titania nanostructures via calcination. In total, this procedure is repeated three times on top of the substrate. The approach is monitored with grazing incidence small angle X‐ray scattering after each fabrication step. With scanning electron microscopy the final hierarchical structure is imaged. From the characterization different structural levels are clearly identified.

     

Synthesis of phosphorus‐carbide thin films by magnetron sputtering

Phosphorus‐carbide, CP_x (0.025 ≤ x ≤ 0.1), thin films have been synthesized by magnetron sputtering from pressed graphite–phosphorus targets. The films were characterized by X‐ray photoelectron spectroscopy, transmission electron microscopy and diffraction, and nanoindentation. CP_0.1 ex‐hibits C–P bonding in an amorphous structure with elements of curved graphene planes, yielding a material with unique short range order. These features are consistent with what has been predicted by our results of theoretically modeled synthetic growth of CP_x . The films are mechanically resilient with hardness up to 24 GPa and elastic recovery up to 72%. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

High‐pressure high‐temperature synthesis of Rh2O3‐II‐type In2O3 polymorph

The metastability of the bixbyite‐ and corundum‐type In₂O₃ polymorphs up to 33 GPa (at room temperature) is shown. While compressed (in diamond anvil cells) and laser‐heated, both polymorphs undergo a phase transition to the Rh₂O₃‐II‐type structure (space group Pbcn, No. 60). The direct transition from bixbyite to Rh₂O₃‐II structure has not yet been observed for any other oxide.

     

Structural and optical properties of ZnO thin films prepared by sol-gel method with different thickness

In this work, ZnO thin films with different thickness were prepared by sol-gel method on glass substrates and the structural and optical properties of these films were studied by X-ray diffractometer, atomic force microscope, UV-visible spectrophotometer, ellipsometer and fluorophotometer, respectively. The structural analyses show that all the samples have a wurtzite structure and are preferentially oriented along the c-axis perpendicular to the substrate surface. The growth process of highly c-axis oriented ZnO thin films derived from sol-gel method is a self-template process. With the increase of film thickness, the structural disorder decreases and the crystalline quality of the films is gradually improved. A transition of crystal growth mode from vertical growth to lateral growth is observed and the transition point is found between 270 and 360 nm thickness. The optical analyses show that with the increase of film thickness, both the refractive index and ultraviolet emission intensity are improved. However, the transmittance in the visible range is hardly influenced by the film thickness, and the averages are all above 80%.     

The impact of twinning on the local texture of chalcopyrite‐type thin films

Twinning in a CuInS₂ layer in a completed thin‐film solar cell was analyzed by means of electron backscatter diffraction. This technique revealed the microstructure of the CuInS₂ thin films and local orientation relationships between the grains. At various locations within the layer it was possible to retrace how twinning occurred comparing the local orientations with the theoretically possible changes in orientation by twinning. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

     

Thermal conductivity of CoSb3 nano‐composites grown via a novel solvothermal nano‐plating technique

We have utilized a solvothermal nano‐plating technique to grow nano‐structured CoSb₃ directly onto the surface of micron‐sized CoSb₃ particles that were subsequently hot pressed and densified into a homogeneous skutterudite nano‐composite. We herein present results for three samples: a bulk sample to serve as a reference, and two samples with solvothermally grown nano‐structures of 5 wt% and 20 wt%, respectively. All three samples used the same bulk starting materials. The thermal conductivity was measured via two independent techniques (steady state and laser flash) and both show a systematic reduction in the thermal conductivity with an increasing amount of nano‐structures. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

In‐situ synthesis of transparent and conductive carbon nanotube networks

A method for the production of transparent carbon nanotube networks (CNTNs) over transparent substrates was developed. In this method, CNTNs were grown directly in the target surface by applying the catalyst in specific zones of the substrate through lithographic techniques. The networks can be also transferred from the original substrate to other surfaces. The newly grown carbon nanotubes have a very high aspect ratio (>50000). Thus far, networks with an optical transmittance of 94% at 550 nm and a surface resistivity of 3.6 kΩ/sq have been produced. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

In‐situ X‐ray diffraction of mechanically milled β‐Al3Mg2 powders

The structure evolution during heating of mechanically milled single‐phase β‐Al₃Mg₂ has been investigated by in‐situ X‐ray diffraction. The nanoscale supersaturated Al(Mg) solid solution formed during milling transforms back to the original β‐Al₃Mg₂ phase through a sequence of phase transformations. At low temperatures, an increasing amount of Mg is rejected from the solid solution with increasing temperature. At intermediate temperatures, the β′‐phase, a hexagonal phase with approximate composition Al₃Mg₂, forms. Finally, at higher temperatures the original β‐Al₃Mg₂ phase is restored, indicating that the formation of the supersaturated solid solution during milling can be reversed by appropriate heat treatment. The phase transformations during heating are gradual and the temperature ranges of stability of the different structure configurations are quite large, all exceeding 50 K. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Thermo‐tunable defect mode in one dimensional photonic structure based on grooved silicon and liquid crystal

A composite 1D photonic structure with defect was designed, fabricated by wet anisotropic etching of (110)‐oriented silicon and filled with liquid crystal. The polarized reflection spectra of the second‐order stop band with defect mode have been registered by means of FTIR microscopy. The thermo‐optical effect in the photonic structure due to phase transition in liquid crystal has been demonstrated in the spectral region of 8.5 µm. The relative shift of the defect mode peak was found experimentally to be 2.0% compared to 3.1% as predicted by calculation. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Novel post‐process for the passivation of a CMOS biosensor

Sensors, which are designed and fabricated in complementary metal oxide semiconductor (CMOS) technology, have become increasingly important in the field of bioelectronics. The standardized industry processes enable a fast, cheap, and reliable fabrication of biosensor devices with integrated addressing and processing units. However, the interfacing of such chips with a liquid environment has been a challenge in recent years. Especially for interfacing living cells with CMOS biosensors different elaborate post‐processes have been proposed. In this article we describe a novel and single step passivation of a CMOS biosensor using a bio‐compatible high‐permittivity thin film, which can be directly applied to the top aluminium layer of a CMOS process. The aluminium oxide and hafnium oxide multi‐layer thin films were prepared using atomic layer deposition at low process temperatures. Electrical I –V and capacitance measurements as well as electrochemical leakage current measurements were performed on films grown on aluminium bottom electrodes. The films showed a very low leakage current and were stable up to 6 V at a thickness of just 50 nm. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical management in high‐efficiency thin‐film silicon micromorph solar cells with a silicon oxide based intermediate reflector

In the effort to increase the stable efficiency of thin film silicon micromorph solar cells, a silicon oxide based intermediate reflector (SOIR) layer is deposited in situ between the component cells of the tandem device. The effectiveness of the SOIR layer in increasing the photo‐carrier generation in the a‐Si:H top absorber is compared for p–i–n devices deposited on different rough, highly transparent, front ZnO layers. High haze and low doping level for the front ZnO strongly enhance the current density (J_sc) in the μc‐Si:H bottom cell whereas J_sc in the top cell is influenced by the angular distribution of the transmitted light and by the reflectivity of the SOIR related to different surface roughness. A total J_sc of 26.8 mA/cm² and an initial conversion efficiency of 12.6% are achieved for 1.2 cm² cells with top and bottom cell thicknesses of 300 nm and 3 μm, and without any anti‐reflective coating on the glass. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Piezo‐voltage control of magnetization orientation in a ferromagnetic semiconductor

The possibility to control magnetic properties via electrical fields is investigated in a piezoelectric actuator/ferromagnetic semiconductor thin film hybrid structure. Using anisotropic magnetoresistance techniques, the magnetic anisotropy and the magnetization orientation within the plane of the ferromagnetic film are measured quantitatively. The experiments reveal that the application of an electrical field to the piezoelectric actuator allows to continuously and reversibly rotate the magnetization orientation in the ferromagnet by about 70°. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

High‐density guided growth of silicon nanowires in nanoporous alumina on Si(100) substrate: Estimation of activation energy

High‐density growth of silicon nanowires confined within a nanoporous alumina template is carried out. The growth rate is measured for several temperatures. An incubation time is observed and measured. The activation energy of this system is calculated and compared to that of growth on a free silicon surface. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth of highly-oriented CaCu3Ti4O12 thin films on SrTiO3 (1 0 0) substrates by a chemical solution route

Highly-oriented CaCu₃Ti₄O₁₂ (CCTO) thin films deposited directly on SrTiO₃ (1 0 0) substrates have been developed successfully using a chemical solution coating method. X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM) were employed to characterize the structure and the morphology. It was observed that the CCTO thin films had the 1 μm × 1 μm domain-like microstructure that consists of compact grains of about 0.1 μm in size. The cross sectional SEM image shows that the CCTO grains grow regularly close to the clear interface between the CCTO film and the SrTiO₃ substrate. The result was discussed in terms of lattice mismatch between CCTO and SrTiO₃.     

Raman spectroscopy of very small Cd1−xCoxS quantum dots grown by a novel protocol: direct observation of acoustic‐optical phonon coupling

Glass‐embedded Cd_1−xCo_xS quantum dots (QDs) with mean radius of R ≈ 1.70 nm were successfully synthesized by a novel protocol on the basis of the melting‐nucleation synthesis route and herein investigated by several experimental techniques. Incorporation of Co²⁺ ions into the QD lattice was evidenced by X‐ray diffraction and magnetic force microscopy results. Optical absorption features with irregular spacing in the ligand field region confirmed that the majority of the incorporated Co²⁺ ions are under influence of a low‐symmetry crystal field located near to the Cd_1−xCo_xS QD surface. Electron paramagnetic resonance data confirmed the presence of Co²⁺ ions in a highly inhomogeneous crystal field environment identified at the interface between the hosting glass matrix (amorphous) and the crystalline QD. The acoustic‐optical phonon coupling in the Cd_1−xCo_xS QDs (x ≠ 0.000) was directly observed by Raman measurements, which have shown a high‐frequency shoulder of the longitudinal optical phonon peak. This effect is tuned by the size‐dependent sp‐d exchange interaction due to the magnetic doping, causing variations in the coupling between electrons and longitudinal optical phonon. Copyright © 2013 John Wiley & Sons, Ltd.