Synthesis and nonlinear optical properties of novel Y‐type polyester containing tricyanovinylthiazolylazoresorcinoxy group with enhanced thermal stability of dipole alignment

Novel Y‐type polyester 4 containing 5‐methyl‐4‐{5‐(1,2,2‐tricyanovinyl)‐2‐thiazolylazo}resorcinoxy groups as nonlinear optical (NLO) chromophores, which are parts of the polymer backbone, was prepared, and its NLO properties were investigated. Polyester 4 is soluble in common organic solvents such as N,N‐dimethylformamide and dimethylsulfoxide. Polymer 4 shows a thermal stability up to 250 °C from thermogravimetric analysis with glass‐transition temperature obtained from differential scanning calorimetry of approximately 94 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1560‐nm fundamental wavelength is 8.12 × 10^?9 esu. The dipole alignment exhibits a thermal stability even at 6 °C higher than glass‐transition temperature (T_g), and no significant SHG decay is observed below 100 °C due to the partial main‐chain character of polymer structure, which is acceptable for NLO device applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The design,synthesis, and nonlinear optical properties of novel X‐type polyurethane containing dicyanovinylnitroresorcinoxy group with enhanced SHG thermal stability

Novel X‐type polyurethane 5 containing 4‐(2′,2′‐dicyanovinyl)‐6‐nitroresorcinoxy groups as nonlinear optical (NLO) chromophores, which constitute parts of the polymer backbone, was prepared and characterized. Polyurethane 5 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It shows thermal stability up to 280 °C from thermogravimetric analysis with a glass transition temperature (T_g) obtained from differential scanning calorimetry thermogram of around 120 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1064‐nm fundamental wavelength is around 6.12 × 10^?9 esu. The dipole alignment exhibits a thermal stability even at 5 °C higher than T_g, and there was no SHG decay below 125 °C due to the partial main chain character of the polymer structure, which is acceptable for NLO device applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and nonlinear optical properties of novel Y‐type polyurethane containing tricyanovinylthiazole with enhanced thermal stability of second harmonic generation

A novel Y‐type poly[iminocarbonyloxyethyl‐5‐methyl‐4‐{2‐thiazolylazo‐4‐(1,2,2‐tricyanovinyl)}resorcinoxyethyloxycarbonylimino‐(3,3′‐dimethoxy‐4,4′‐biphenylene)] 4 containing 5‐methyl‐4‐{5‐(1,2,2‐tricyanovinyl)‐2‐thiazolylazo}resorcinoxy groups as nonlinear optical (NLO) chromophores, which constitute part of the polymer backbone, was prepared and characterized. Polyurethane 4 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It showed a thermal stability up to 250 °C in thermogravimetric analysis thermogram and the glass‐transition temperature (T_g) obtained from differential scanning calorimetry thermogram was around 118 °C. The second harmonic generation coefficient (d₃₃) of poled polymer films at 1560 nm fundamental wavelength was around 8.43 × 10^?9 esu. The dipole alignment exhibited a thermal stability even at 12 °C higher than T_g, and there was no SHG decay below 130 °C due to the partial main‐chain character of the polymer structure, which is acceptable for NLO device applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1166–1172, 2010     

Synthesis and electro‐optic properties of novel X‐type polyurethane containing nitrophenylazonitroresorcinoxy group with highly enhanced thermal stability of dipole alignment

Novel X‐type polyurethane 4 containing 4‐(4‐nitrophenylazo)‐6‐nitroresorcinoxy groups as nonlinear optical (NLO) chromophores, which are parts of the polymer main chains, was prepared and characterized. Polyurethane 4 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It shows thermal stabilities up to 270 °C from thermogravimetric analysis with glass transition temperature obtained from differential scanning calorimetry of about 134 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1064 nm fundamental wavelength is 5.37 × 10^?9 esu. Polymer 4 exhibits a thermal stability up to T_g, and no significant SHG decay is observed below 135 °C, which is acceptable for NLO device applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 760–766     

Synthesis and properties of novel Y‐type nonlinear optical polyimides with high thermal stability of second harmonic generation

2,4‐Bis‐(3,4‐dicarboxyphenylcarboxyethoxy)‐1‐(2,2‐dicyanovinyl)benzene dianhydride (4) was prepared and reacted with 4,4′‐oxydianiline, 4,4′‐diaminobenzanilide and 4,4′‐(hexafluoroisopropylidene)dianiline to yield novel Y‐type polyimides 5‐7 containing 2,4‐dioxybenzylidenemalononitrile groups as nonlinear optical (NLO) chromophores, which constitute parts of the polymer backbone. The resulting polyimides 5‐7 are soluble in polar solvents such as dimethylsulfoxide and N,N‐dimethylformamide. Polymers 5‐7 showed a thermal stability up to 330 °C in thermogravimetric analysis thermograms with T_g values obtained from differential scanning calorimetry thermograms in the range 179–194 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064 nm fundamental wavelength were around 5.56 × 10^?9 esu. The dipole alignment exhibited exceptionally high thermal stability even at 20 °C higher than the glass‐transition temperature there was no SHG decay below 215 °C because of the partial main‐chain character of polymer structure, which is acceptable for NLO device applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3078–3087, 2008     

Molecular design,synthesis, and nonlinear optical properties of novel T‐type polyimides with exceptionally high thermal stability of the second harmonic generation

2,5‐Bis‐(3,4‐dicarboxyphenylcarboxyethoxy)‐4′‐nitrostilbene dianhydride was prepared and reacted with 1,4‐phenylenediamine, 4,4′‐oxydianiline, 4,4′‐diaminobenzanilide, and 4,4′‐(hexafluoroisopropylidene)dianiline to yield unprecedented novel T‐type polyimides ( 4 – 7 ) containing 2,5‐dioxynitrostilbenyl groups as nonlinear optical chromophores, which constituted parts of the polymer backbones. 4 – 7 were soluble in polar solvents such as acetone and N,N‐dimethylformamide. They showed thermal stability up to 300 °C in thermogravimetric analysis thermograms; the glass‐transition temperatures obtained from differential scanning calorimetry thermograms were around 153 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064‐cm^?1 fundamental wavelength were around 4.35 × 10^?9 esu. The dipole alignment exhibited exceptionally high thermal stability even at 45 °C higher than the glass‐transition temperature, and there was no SHG decay below 200 °C because of the partial main‐chain character of the polymer structure, which was acceptable for nonlinear optical device applications. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3189–3199, 2004     

New series of highly phenyl‐substituted polyfluorene derivatives for polymer light‐emitting diodes

A new series of highly phenyl‐substituted polyfluorene derivatives were synthesized and characterized. The resulting polymers were amorphous and showed excellent solubility in common organic solvents, such as chloroform, tetrahydrofuran, xylene, toluene, chlorobenzene, and so forth. All possessed satisfied thermal stability with glass‐transition temperatures (T_g's) in the range of 79–115 °C. They emitted blue light with photoluminescent (PL) maximum peaks at about 408–412 nm in thin films. The PL efficiencies of the polymer films were measured around 30–33%. The highly phenylated pendants improved the T_g of polyfluorene without forming defects in the polymers and reduced their tendency to form aggregate/excimers. Polymer light‐emitting diodes were fabricated from these polymers with the configuration of indium tin oxide/polyethylenedioxythiophene:polystyrene sulfonic acid/polymer/Ba/Al, which emitted bright blue light with maximum peaks at 418–420 nm. The maximum external quantum efficiencies of these devices were 0.41–0.6%. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2985–2993, 2004     

Thermally stable nonlinear optical polyurea functionalized by multiple charge‐transfer chromophore

A novel high glass‐transition temperature (272 °C) polyurea functionalized by a multiple charge‐transfer chromophore, 2‐{4‐[4,5‐bis(4‐nitrophenyl)imidazolyl]phenyl}‐4,5‐bis(4‐aminophenyl)imidazole, was synthesized. Simultaneous poling and polymerization and the in situ second‐harmonic generation (SHG) measurement technique was carried out to evaluate the thermal stability of the poling‐induced orientation. The nonlinear optical coefficient d₃₃ of poled polyurea film was 24 pm/V at 1064 nm fundamental wavelength. The SHG signal of the poled polymer film was quite stable below 200 °C and still remained 80% of its initial value after heating at 250 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4297–4301, 2002     

Synthesis and polymerization of new self‐polymerizable quinoxaline monomers

Extended self‐polymerizable poly(phenylquinoxaline) monomer mixtures {i.e.,2‐[4‐(4‐hydroxyphenoxy)phenyl]‐3‐phenyl‐6‐chloroquinoxaline and 3‐[4‐(4‐hydroxy phenoxy)phenyl]‐2‐phenyl‐6‐chloroquinoxaline, 2‐[4‐(4‐hydroxyphenoxy)phenyl]‐3‐phenyl‐6‐fluoroquinoxaline and 3‐[4‐(4‐hydroxyphenoxy)phenyl]‐2‐phenyl‐6‐fluoroquinoxaline, and 2‐(4‐fluorophenyl)‐3‐phenyl‐6‐(4‐hydroxyphenoxy)quinoxaline and 3‐(4‐fluorophenyl)‐2‐phenyl‐6‐(4‐hydroxyphenoxy)quinoxaline} more flexible and nucleophilic than a previously reported monomer mixture [i.e., 3‐(4‐hydroxyphenyl)‐2‐phenyl‐6‐fluoroquinoxaline and 2‐(4‐hydroxyphenyl)‐3‐phenyl‐6‐fluoroquinoxaline] were synthesized. The monomer mixtures were then polymerized into high‐molecular‐weight polymers. A sample was obtained, through a chlorine displacement reaction, that was a semicrystalline polymer with an intrinsic viscosity of 1.11 dL/g in m‐cresol at 30 ± 0.1 °C and two melting temperatures at 339 and 377 °C in the first differential scanning calorimetry scan. There was a melting temperature at 328 °C without a detectable glass‐transition temperature (T_g) when the sample was subjected to a second differential scanning calorimetry scan. The samples from fluorine displacement reactions were completely amorphous polymers. They had intrinsic viscosities of 0.53–0.90 dL/g in m‐cresol at 30 ± 0.1 °C and T_g's of 220–224 °C. The polymer samples from fluorine displacement reactions were evaluated with gel permeation chromatography and matrix‐assisted laser desorption/ionization time‐of‐flight analyses, which monitored the existence of certain amounts of cyclic oligomers. The thin films of the polymers had room‐temperature tensile strengths of 97–113 MPa, room‐temperature Young's moduli of 2.30–2.35 GPa, and room‐temperature elongations at break of 40–150%. The melt viscosity decreased from 10⁷ to less than 10⁴ Pa s at 310 °C as the frequency was increased from 10^?2 to 10² rad/s. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 78–91, 2005     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Synthesis of polyphenylquinoxaline copolymers via aromatic nucleophilic substitution reactions of an A‐B quinoxaline monomer

A self‐polymerizable quinoxaline monomer (A‐B) has been synthesized and polymerized via aromatic nucleophilic substitution reactions. An isomeric mixture of self‐polymerizable quinoxaline monomers—2‐(4‐hydroxyphenyl)‐3‐phenyl‐6‐fluoroquinoxaline and 3‐(4‐hydroxyphenyl)‐2‐phenyl‐6‐fluoroquinoxaline—was polymerized in N‐methyl‐2‐pyrrolidinone (NMP) to afford high molecular weight polyphenylquinoxaline (PPQ) with intrinsic viscosities up to 1.91 dL/g and a glass‐transition temperature (T_g) of 251 °C. A series of comonomers was polymerized with A‐B to form PPQ/polysulfone (PS), PPQ/polyetherether ketone (PEEK), and PPQ/polyethersulfone (PES) copolymers. The copolymers readily obtained high intrinsic viscosities when fluorine was displaced in NMP under reflux. However, single‐electron transfer (SET) side reactions, which limit molecular weight, played a more dominant role when chlorine was displaced instead of fluorine. SET side reactions were minimized in the synthesis of PPQ/PS copolymers through mild polymerization conditions in NMP for longer polymerization times. Thus, the T_g's of PES (T_g = 220 °C), PEEK (T_g = 145 °C), and PS (T_g = 195 °C) were raised through the incorporation of quinoxaline units into the polymer. Copolymers with high intrinsic viscosities resulted in all cases, except in the case of PPQ/PEEK copolymers when 4,4′‐dichlorobenzophenone was the comonomer. © 2001 John Wiley & Sons, Inc. J Polym Sci A Part A: Polym Chem 39: 2037–2042, 2001     

Poly(phenyl methacrylate) and poly(1‐naphthyl methacrylate) prepared in microemulsions

Phenyl methacrylate and 1‐naphthyl methacrylate were polymerized in microemulsions using stearyltrimethylammonium chloride, cetyltrimethylammonium bromide, and a mixture of nonionic Triton surfactants to form latexes that were 20–30 nm in diameter. A temperature of 70 °C was needed to obtain polymers using thermal initiation. The tacticities of poly(phenyl methacrylate) (PPhMA) (55% rr) and poly(1‐naphthyl methacrylate) (P‐1‐NM) (47% rr) were the same as those of the polymers prepared in toluene solutions. The weight average molecular weights were 1 × 10⁶ and 5 × 10⁵ g/mol for PPhMA and P‐1‐NM prepared in microemulsions with very broad distributions. PPhMA samples from microemulsions and solution had the same T_g = 127 °C. P‐1‐NM from microemulsions had T_g = 145–147 °C compared with T_g = 142 °C for P‐1‐NM from solution. The molecular weights and the glass‐transition temperatures of both PPhMA and P‐1‐NM from microemulsions are substantially higher than any previously reported. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 519–524, 2001     

Effect of pressure and temperature on chromophore reorientation in a new syndioregic main‐chain hydrazone nonlinear optical polymer

Second harmonic generation (SHG) was used to measure the temperature dependence of the reorientation activation volume (ΔV*) of a syndioregic main‐chain hydrazone (SMCH) nonlinear optical polymer. The decay of the SHG signal from poled films of SMCH was recorded at hydrostatic pressures up to 2924 atm and at temperatures between 25 °C below the glass‐transition temperature (T_g) to 20 °C above it. ΔV* for pressures less than 500–1000 atm and T > T_g decreased as the temperature was increased. For pressures greater than 1000 atm, ΔV* was essentially constant for all temperatures. In addition, the size of ΔV* indicated that the chromophore in this main chain was internally flexible. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 895–900, 2001     

Polar,functionalized diene‐based material. III. Free‐radical polymerization of 2‐[(N,N‐dialkylamino)methyl]‐1,3‐butadienes

The bulk free‐radical polymerization of 2‐[(N,N‐dialkylamino)methyl]‐1,3‐butadiene with methyl, ethyl, and n‐propyl substituents was studied. The monomers were synthesized via substitution reactions of 2‐bromomethyl‐1,3‐butadiene with the corresponding dialkylamines. For each monomer the effects of the polymerization initiator, initiator concentration, and reaction temperature on the final polymer structure, molecular weight, and glass‐transition temperature (T_g) were examined. Using 2,2′‐azobisisobutyronitrile as the initiator at 75 °C, the resulting polymers displayed a majority of 1,4 microstructures. As the temperature was increased to 100 and 125 °C using t‐butylperacetate and t‐butylhydroperoxide, the percentage of the 3,4 microstructure increased. Differential scanning calorimetry indicated that all of the T_g values were lower than room temperature. The T_g values were higher when the majority of the polymer structure was 1,4 and decreased as the percentage of the 3,4 microstructure increased. The Diels–Alder side products found in the polymer samples were characterized using NMR and gas chromatography‐mass spectrometry methods. The polymerization temperature and initiator concentration were identified as the key factors that influenced the Diels–Alder dimer yield. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4070–4080, 2000     

Preparation and properties of polybenzoxazine/poly(imide‐siloxane) alloys: In situ ring‐opening polymerization of benzoxazine in the presence of soluble poly(imide‐siloxane)s

Benzoxazine monomer (Ba) was blended with soluble poly(imide‐siloxane)s in various weight ratios. The soluble poly(imide‐siloxane)s with and without pendent phenolic groups were prepared from the reaction of 2,2′‐bis(3,4‐dicarboxylphenyl)hexafluoropropane dianhydride with α,ω‐bis(aminopropyl)dimethylsiloxane oligomer (PDMS; molecular weight = 5000) and 3,3′‐dihydroxybenzidine (with OH group) or 4,4′‐diaminodiphenyl ether (without OH group). The onset and maximum of the exotherm due to the ring‐opening polymerization for the pristine Ba appeared on differential scanning calorimetry curves around 200 and 240 °C, respectively. In the presence of poly(imide‐siloxane)s, the exothermic temperatures were lowered: the onset to 130–140 °C and the maximum to 210–220 °C. The exotherm due to the benzoxazine polymerization disappeared after curing at 240 °C for 1 h. Viscoelastic measurements of the cured blends containing poly(imide‐siloxane) with OH functionality showed two glass‐transition temperatures (T_g's), at a low temperature around ?55 °C and at a high temperature around 250–300 °C, displaying phase separation between PDMS and the combined phase consisting of polyimide and polybenzoxazine (PBa) components due to the formation of AB‐crosslinked polymer. For the blends containing poly(imide‐siloxane) without OH functionalities, however, in addition to the T_g due to PDMS, two T_g's were observed in high‐temperature ranges, 230–260 and 300–350 °C, indicating further phase separation between the polyimide and PBa components due to the formation of semi‐interpenetrating networks. In both cases, T_g increased with increasing poly(imide‐siloxane) content. Tensile measurements showed that the toughness of PBa was enhanced by the addition of poly(imide‐siloxane). Thermogravimetric analysis showed that the thermal stability of PBa also was enhanced by the addition of poly(imide‐siloxane). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2633–2641, 2001     

Syntheses and properties of new aromatic polybenzoxazoles bearing ether and phenylethylidene or 1‐phenyl‐2,2,2‐trifluoroethylidene linkages

Two new bis(ether acyl chloride)s, 1,1‐bis[4‐(4‐chloroformylphenoxy)phenyl]‐1‐phenylethane and 1,1‐bis[4‐(4‐chloroformylphenoxy)phenyl]‐1‐phenyl‐2,2,2‐trifluoroethane, were prepared from readily available reagents. Aromatic polybenzoxazoles with both ether and phenylethylidene or 1‐phenyl‐2,2,2‐trifluoroethylidene linkages between phenylene units were obtained by a conventional two‐step procedure including the low‐temperature solution polycondensation of the bis(ether acyl chloride)s with three bis(o‐aminophenol)s, yielding poly(o‐hydroxyamide) precursors, and subsequent thermal cyclodehydration. The intermediate poly(o‐hydroxyamide)s exhibited inherent viscosities of 0.39–0.98 dL/g. All of the poly(o‐hydroxyamide)s were amorphous and soluble in polar organic solvents such as N,N‐dimethylacetamide, and most of them could afford flexible and tough films via solvent casting. The poly(o‐hydroxyamide)s exhibited glass‐transition temperatures (T_g's) of 129–194 °C and could be thermally converted into corresponding polybenzoxazoles in the solid state at temperatures higher than 300 °C. All the polybenzoxazoles were amorphous and showed an enhanced T_g but a dramatically decreased solubility with to respect to their poly(o‐hydroxyamide) precursors. They exhibited T_g's of 216–236 °C through differential scanning calorimetry and were stable up to 500 °C in nitrogen or air, with 10% weight‐loss temperatures being recorded between 538 and 562 °C in nitrogen or air. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 914–921, 2003     

Synthesis of polyphosphates by the polyaddition of bisphenol-S diglycidyl ether and aryl phosphorodichloridates

In this study, we synthesized polyphosphates with reactive pendant chloromethyl groups by an addition reaction of the diglycidyl ether of bisphenol-S (bisphenol-S epoxy, BPSE) with aryl phosphorodichloridates. The polyphosphates obtained were characterized by IR, ¹H NMR spectra, elemental analysis, TGA, DSC, X-ray diffraction, and molar mass measurement. The polyaddition proceeded very smoothly in aromatic solvents catalyzed by quaternary ammonium or phosphonium salts such as tetrabutylammonium bromide and tetrabutylphosphonium bromide to produce a polymer having a high molecular weight. Polymer B, containing a bromine atom in the phenyl ring side chain, has the higher T_g value (T_g = 58°C) than the polyphosphate derived from phenoxy dichlorophosphate (PDCP). Polymer A derived from PDCP begins to lose 10% of its mass at 278°C, and the mass percentage remaining at 700°C is 44% under nitrogen. X-ray diffraction patterns revealed that all the subsequent polyphosphates are amorphous. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2365–2369, 1997     

Synthesis of poly(2‐ethylhexyl acrylate)/clay nanocomposite by in situ living radical polymerization

This investigation reports the preparation of tailor‐made poly(2‐ethylhexyl acrylate) (PEHA) prepared via in situ living radical polymerization in the presence of layered silicates and characterization of this polymer/clay nanocomposite. Being a low T_g (?65 °C) material, PEHA has very good film formation property for which it is used in paints, adhesives, and coating applications. 2‐Ethylhexyl acrylate was polymerized at 90 °C using CuBr and Cu(0) as catalyst in combination with N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) as ligand. A tremendous enhancement in reaction rate and polymerization data was achieved when acetone was added as additive to increase the efficiency of the catalyst system. PEHA/clay nanocomposite was prepared at 90 °C using CuBr as catalyst in combination with PMDETA as ligand. Different types of clay with same loading were also used to study the effect on reaction rate. The molecular weight (M_n) and polydispersity index of the prepared nanocomposites were characterized by size exclusion chromatography. The active end group of the polymer chain was analyzed by ¹H NMR analysis and by chain extension experiment. Polymer/clay interaction was studied by Fourier Transform Infrared spectrometry and wide‐angle X‐ray diffraction analyses. Distribution of clay in the polymer matrix was studied by the transmission electron microscopy. Thermogravimetric analysis showed that thermal stability of PEHA/clay nanocomposite increases on addition of nanoclay. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Enhanced Temporal Stability of an NLO Polyurethane via a Two‐Dimensional Chromophore

A new NLO‐active polyurethane (T_g = 145°C) based on a two‐dimensional NLO chromophore has been investigated. Two ends of this lambda‐shaped chromophore can be directly bound to the main chain of polyurethane. After poling, fast relaxation of the effective second harmonic (SH) coefficient was observed at temperatures higher than 122°C. Moreover, excellent temporal stability at 100°C was obtained despite the operating temperature being very close to the fast relaxation temperature. This is due to the fact that embedding the rigid lambda‐shaped chromophores into the polymer backbone effectively restricts molecular motion at temperatures close to T_g.     

NOTE: Synthesis and Characterization of a Poly(acrylamide) with Pendant 1,4-piperazine-2,5-dione Moieties via Post-polymerization Cyclization

A poly(acrylamide) was synthesized from N ^α -Boc-N ^? -acrolyl-l-lysylglycine methyl ester via radical polymerization. This polymer typically had Mn ～ 100,000 g/mol, Mw ～ 300,000 g/mol, and a T_g of 93°C. Removal of Boc with TFA and cyclization with DABCO? in DMSO at 65°C afforded a soluble piperazinedione-containing polymer that had a T_g of 157°C and thermal stability up to 300°C. These results demonstrate a viable and efficient synthetic route to piperazinedione-containing polyacrylamides of high molecular weight. Related polymers that incorporate substituted indane moieties could be useful high T_g materials for fabrication of LC and NLO devices.