Keggin类杂多化合物催化环氧化环戊烯的谱学研究

报道了一系列Keggin 类杂多化合物与H₂O₂ (30%)催化氧化环戊烯. 其中两缺位的 [γ-SiW₁₀(H₂O)₂O₃₄](Bu₄N)₄ 的催化活性最好, 环戊烯转化率为90%, 环戊烯环氧化物的选择性为98%. 反应前后的UV-vis, FT-IR分析表明, 反应后催化剂的结构保持, 没有发生降解. 在以磷为中心原子的磷系Keggin 杂多酸复合溴代十六烷基吡啶中, 钼钨混合型的催化活性优于钨磷酸(H₃PW₁₂O₄₀•mH₂O)和钼磷酸(H₃PMo₁₂O₄₀•mH₂O)的. 而在十一种钼钨混合型的含磷杂多化合物H₃PMo_12－nW_nO₄₀•mH₂O中, 当n＝6时的H₃PMo₆W₆O₄₀•mH₂O显示出了最好的活性. 我们采用UV-vis, FT-IR and ³¹P NMR 等谱学方法表征了新鲜的催化剂和处于反应状态下的催化剂. 发现在反应条件H₂O₂ (30%)的量是催化剂的50倍时, H₃PMo₆W₆O₄₀•mH₂O全部降解成数种含磷的物种, 这些含磷物种可能包含反应中最具催化活性的物种. 而在此条件时, 发现H₃PW₁₂O₄₀•mH₂O降解得很少, 只有一种磷钨氧物种生成, 但不是Venturello-Ishii催化体系中的活性物种{PO₄[WO(O₂)₂]₄}^3－.     

Preparation of 1-butyl-3-methylimidazolium dodecatungstophosphate and its catalytic performance for esterification of ethanol and acetic acid

1-Butyl-3-methylimidazolium dodecatungstophosphate catalyst ([bmim]₃PW₁₂O₄₀) with high water tolerance was prepared from 1-butyl-3-methylimidazolium bromide ([bmim]Br) and phosphotungstic acid (H₃PW₁₂O₄₀). The catalyst was characterized by means of Fourier transform infrared spectroscopy, thermogravimetry-differential scanning calorimetry, n-BuNH₂ potentiometric titration, elemental analysis and so on. Its catalytic activity for esterification of ethanol and acetic acid to ethyl acetate was measured. The results show that there were three crystal-water molecules in the [bmim]₃PW₁₂O₄₀ catalyst, and it preserved the primary Keggin structure and acid strength of H₃PW₁₂O₄₀. The acid amount of [bmim]₃PW₁₂O₄₀ catalyst was less than that of H₃PW₁₂O₄₀. The [bmim]₃PW₁₂O₄₀ catalyst exhibited higher catalytic activity and reusability in the esterification of ethanol and acetic acid to ethyl acetate. __________ Translated from Chinese Journal of Catalysis, 2008, 29(7) (in Chinese)     

Catalytic Synthesis of n-Butyraldehyde 1,2-propanediol Acetal over H4SiW12O40-PAn

A new environmentally friendly catalyst, H₄SiW₁₂O₄₀-polyaniline (PAn), was prepared, and n-butyraldehyde 1,2-propanediol acetal was synthesized from n-butyraldehyde and 1,2-propanediol in the presence of H₄SiW₁₂O₄₀-PAn. The influence factors of the synthesis were discussed, and the best reaction conditions were found: the molar ratio of n-butyraldehyde to 1,2-propanediol is 1:1.5, the amount of catalyst used is 1.2% of feed stock, and the reaction time is 1.0 h. H₄SiW₁₂O₄₀-PAn is an excellent catalyst for synthesizing n-butyraldehyde 1,2-propanediol acetal, and the yield can reach more than 95.2%. *Translated from Journal of Central China Normal University (Natural Sciences Edition), 2005, 39(9) (in Chinese), 2004, 28(4) (in Chinese)     

Boehmite nano‐particles functionalized with silylpropylamine‐supported Keggin‐type heteropolyacids: Catalysts for epoxidation of alkenes

Boehmite nano‐particles with a high degree of surface hydroxyl groups were covalently functionalized by 3‐(trimethoxysilyl)‐propylamine to support H₃[PMo₁₂O₄₀], H₃[PW₁₂O₄₀], H₄[SiMo₁₂O₄₀] and H₄[SiW₁₂O₄₀] Keggin‐type heteropolyacids. After characterization of these catalysts by FT‐IR, powder X‐ray diffraction, TG/differential thermal analysis, CHN, inductively coupled plasma and transmission electron microscopy techniques, they were applied to the epoxidation of cis‐cycloocten. The progress of the reactions was investigated by gas–liquid chromatography, and the catalytic procedures were optimized for the parameters involved, such as the solvent and oxidant. The results showed that 25 mg of supported H₃[PMo₁₂O₄₀] catalyst in 1 ml C₂H₄Cl₂ with 0.5 mmol cyclooctene and 1 mmol tert‐butylhydroperoxide at reflux temperature gave 98% yield over 15 min. Recycling experiments revealed that these nanocatalysts could be repeatedly applied up to five times for a nearly complete epoxidation of cis‐cycloocten. The optimized experimental conditions were also used successfully for the epoxidation of some other alkenes, such as cyclohexene, styrene and α‐methyl styrene.     

Keggin Heteropolyacid Catalyzed Synthesis of Isoxazolo[5,4-d]pyrimidine-4,6(5H,7H)-diones at Room Temperature

Isoxazolo[5,4‐d]pyrimidine‐4,6(5H,7H)diones 2a – 2f have been synthesized from the reaction of ethyl 5‐amino‐3‐methyl‐4‐isoxazole carboxylate ( 1 ) with aryl isocyanates in the presence of Keggin heteropolyacid H₃[PW₁₂O₄₀] as a green solid acid catalyst at room temperature in a one‐pot process in good yields.     

Selective Conversion of Cellobiose and Cellulose into Gluconic Acid in Water in the Presence of Oxygen,Catalyzed by Polyoxometalate‐Supported Gold Nanoparticles

Gold nanoparticles loaded onto Keggin‐type insoluble polyoxometalates (Cs_xH_3?xPW₁₂O₄₀) showed superior catalytic performances for the direct conversion of cellobiose into gluconic acid in water in the presence of O₂. The selectivity of Au/Cs_xH_3?xPW₁₂O₄₀ for gluconic acid was significantly higher than those of Au catalysts loaded onto typical metal oxides (e.g., SiO₂, Al₂O₃, and TiO₂), carbon nanotubes, and zeolites (H‐ZSM‐5 and HY). The acidity of polyoxometalates and the mean‐size of the Au nanoparticles were the key factors in the catalytic conversion of cellobiose into gluconic acid. The stronger acidity of polyoxometalates not only favored the conversion of cellobiose but also resulted in higher selectivity of gluconic acid by facilitating desorption and inhibiting its further degradation. On the other hand, the smaller Au nanoparticles accelerated the oxidation of glucose (an intermediate) into gluconic acid, thereby leading to increases both in the conversion of cellobiose and in the selectivity of gluconic acid. The Au/Cs_xH_3?xPW₁₂O₄₀ system also catalyzed the conversion of cellulose into gluconic acid with good efficiency, but it could not be used repeatedly owing to the leaching of a H⁺‐rich hydrophilic moiety over long‐term hydrothermal reactions. We have demonstrated that the combination of H₃PW₁₂O₄₀ and Au/Cs_3.0PW₁₂O₄₀ afforded excellent yields of gluconic acid (about 85 %, 418 K, 11 h), and the deactivation of the recovered H₃PW₁₂O₄₀–Au/Cs_3.0PW₁₂O₄₀ catalyst was not serious during repeated use.     

Ag3[PMo12O40]: An efficient and green catalyst for the synthesis of highly functionalized pyran‐annulated heterocycles via multicomponent reaction

A facile, efficient and eco‐friendly catalytic protocol was developed for the synthesis of medicinally important pyran‐annulated heterocycles via multicomponent reaction (MCR). Cyclocondensation of differently substituted aromatic aldehydes, malononitrile/ethyl cyanoacetate and various β‐dicarbonyl compounds in the presence of Ag₃[PMo₁₂O₄₀]?nH₂O as heterogeneous catalyst, in EtOH–H₂O, afforded diverse pyran‐fused chromene analogues. The merits observed for this approach were it being conducted via MCR, using commercially available or easily accessible starting materials in the presence of a green and easily separable heterogeneous and reusable catalyst, and affording high yields of desired products in very short reaction times with high purity in one‐pot fashion, thus providing a superior alternative approach for the synthesis of pyran‐annulated heterocycles.     

Phosphomolybdic acid supported on Schiff base functionalized graphene oxide nanosheets: Preparation,characterization, and first catalytic application in the multi‐component synthesis of tetrahydrobenzo[a]xanthene‐11‐ones

New Schiff base (SB) functionalized graphene oxide (GO) nanosheets containing phosphomolybdic counter‐anion H₂PMo₁₂O₄₀^¯ (H₂PMo) were successfully prepared by grafting of 3‐aminopropyltriethoxysilane (APTS) on GO nanosheets followed by condensation with benzil and finally reaction with phosphomolybdic acid (H₃PMo₁₂O₄₀, denoted as H₃PMo) and characterized using Fourier transform infrared (FT‐IR) spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), particle size distribution, energy‐dispersive X‐ray (EDX) analysis, EDX elemental mapping, and inductively coupled plasma optical emission spectrometry (ICP‐OES). The prepared new nanomaterial, denoted as GO‐SB‐H₂PMo, was shown to be an efficient heterogeneous catalyst in one‐pot, three‐component reaction of β‐naphthol, aldehydes, and dimedone, giving high yields of tetrahydrobenzo[a]xanthene‐11‐ones within short reaction times. The catalyst is readily recovered by simple filtration and can be recycled and reused several times with no significant loss of catalytic activity.     

Mesostructure organic‐inorganic hybrid ionic liquids based on heteropoly acids: Effect of linkage on the molecular structure and catalytic activity

The new inorganic–organic hybrids based on SO₃H‐functionalized ionic liquids (ILs) and Keggin‐type heteropoly acids (H₃PW₁₂O₄₀, H₃PMo₁₂O₄₀, and H₄SiW₁₂O₄₀; HPAs) are prepared and characterized by FT‐IR, NMR, XRD, CV, SEM/EDX, ICP‐OES, BJH and UV. Different molecular structures according to the different inorganic part were also proved. Potentiometric titration showed a good relationship between catalytic activity and acidity of the catalysts. Electrochemical aspects showed electron transfer ability of the compounds. For understanding catalytic activities of the HPA‐IL hybrids in N‐formylation reaction, effect of catalyst composition, substrate, and reaction conditions were studied. The best SO₃H‐functionalized ionic liquid catalyst was readily recovered and reused for four runs. Easy preparation of the catalyst, simple and easy work‐up, mild reaction conditions, low cost, excellent yields and short reaction times are the key features of this work.     

H3PMo12O40‐immobilized chitosan/Co3O4: A novel and recyclable nanocomposite for the synthesis of pyrimidinedione derivatives

An efficient three‐component reaction of aromatic aldehydes, 6‐aminouracil/6‐amino‐1,3‐dimethyluracil and 4‐hydroxycoumarin in the presence of a novel heterogeneous catalyst H₃PMo₁₂O₄₀‐immobilized Co₃O₄/chitosan led to a synthesis of a new class of pyrimidinedione derivatives under reflux conditions. The magnetically recoverable nanocomposite of Co₃O₄/chitosan/H₃PMo₁₂O₄₀ was fully characterized by Fourier transform‐infrared spectrophotometry, scanning electron microscopy, X‐ray powder diffraction, energy‐dispersive X‐ray spectroscopy, vibrating‐sample magnetometry and N₂ adsorption–desorption by Brunauer–Emmett–Teller analysis. Results show that Keggin‐type 12‐molybdophosphoric acid immobilized into the network of the cross‐linked chitosan with super‐paramagnetic Co₃O₄ nanoparticles. The present method offers several advantages, such as simple procedure, short reaction times and excellent yields of products. The novelty of the catalyst, high catalytic activity, easy separation from the reaction with an external magnetic field and reusability of the catalyst in six consecutive runs are additional eco‐friendly attributes of this catalytic system.     

A Keggin Polyoxometalate Shows Water Oxidation Activity at Neutral pH: POM@ZIF‐8, an Efficient and Robust Electrocatalyst

Keggin‐type polyoxometalate anions [XM₁₂O₄₀]^n? are versatile, as their applications in interdisciplinary areas show. The Keggin anion [CoW₁₂O₄₀]^6? turns into an efficient and robust electrocatalyst upon its confinement in the well‐defined void space of ZIF‐8, a metal–organic framework (MOF). [H₆CoW₁₂O₄₀]@ZIF‐8 is so stable to water oxidation that it retains its initial activity even after 1000 catalytic cycles. The catalyst has a turnover frequency (TOF) of 10.8 mol O₂(mol Co)^?1 s^?1, one of the highest TOFs for electrocatalytic oxygen evolution at neutral pH. Controlled experiments rule out the chances of formation and participation of CoO_x in this electrocatalyic water oxidation.     

Shape selective oxidation by a microporous platinum-polyoxometalate

Shape selective catalytic behaviour of a platinum-promoted polyoxometalate, 0.5 wt% Pt−Cs_2.1H_{0 9}PW₁₂O₄₀, has been studied for complete oxidation of methane and benzene. The pore size of this catalyst determined by adsorptions of n-butane and isobutane was close to the molecular size of n-butane (0.43 nm). Ar and N₂ porosimetries demonstrated that 0.5 wt% Pt−Cs_{2 1}H_{0 9}PW₁₂O₄₀ possesses unimodal distribution of pores in ultramicropore region. External surface area was estimated to be less than 3% that of the total surface area (61 m² g⁻¹) of the catalyst. Owing to the restricted pores, this exhibited efficient shape selectivity; methane (molecular size; 0.38 nm) was readily oxidized, while the oxidations of the larger molecule such as benzene (0.59 nm) were greatly suppressed. These results indicate that 0.5 wt% Pt−Cs_{2 1}H_{0 9}PW₁₂O₄₀ is a promising microporous catalyst.     

New Entangled Coordination Networks Based on Charge‐Tunable Keggin‐Type Polyoxometalates

Investigation into a hydrothermal reaction system with transition‐metal (TM) ions, 1,4‐bis(1,2,4‐triazol‐1‐lmethyl)benzene (BBTZ) and various charge‐tunable Keggin‐type polyoxometalates (POMs) led to the preparation of four new entangled coordination networks, [Co^II(HBBTZ)(BBTZ)_2.5][PMo₁₂O₄₀] ( 1 ), [Cu^I(BBTZ)]₅[BW₁₂O₄₀] ? H₂O ( 2 ), [Cu^II(BBTZ)]₃[AsW^V₃W^VI₉O₄₀] ? 10 H₂O ( 3 ), and [Cu^II₅(BBTZ)₇(H₂O)₆][P₂W₂₂Cu₂O₇₇(OH)₂] ? 6 H₂O ( 4 ). All compounds were characterized by using elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction, and single‐crystal X‐ray diffraction. The mixed valence of W centers in compound 3 was further confirmed by using XPS spectroscopy and bond‐valence sum calculations. In the structural analysis, the entangled networks of 1 – 4 demonstrate zipper‐closing packing, 3D polythreading, 3D polycatenation, and 3D self‐penetration, respectively. Moreover, with the enhancement of POM negative charges and the use of different TM types, the number of nodes in the coordination networks of 1 – 4 increased and the basic metal–organic building motifs changed from a 1D zipper‐type chain (in 1 ) to a 2D pseudorotaxane layer (in 2 ) to a 3D diamond‐like framework (in 3 ) and finally to a 3D self‐penetrating framework (in 4 ). The photocatalytic properties of compounds 1 – 4 for the degradation of methylene blue under UV light were also investigated; all compounds showed good catalytic activity and the photocatalytic activity order of Keggin‐type species was initially found to be {XMo₁₂O₄₀}>{XW₁₂O₄₀}>{XW_12?nTM_nO₄₀}.     

One‐pot synthesis of trifluoromethylated benzimidazolines catalyzed by phosphotungstic acid with a low catalyst loading

The inexpensive Keggin‐type polyoxometalate, i.e. H₃PW₁₂O₄₀ was found to be an effect catalyst for the condensation‐cyclization reaction of 1,2‐phenylenediamines and trifluoromethyl ketones to synthesize trifluoromethylated heterocycles, including benzimidazolines, benzoxazolines and benzothiazolines. Only 1 mol% of H₃PW₁₂O₄₀ was required in this work, and the synergistic effect of proton and polyanion was vital for the reaction. Significantly, the POM catalyst could be easily recovered by using a biphasic solvent system (H₂O/toluene, V/V = 1:5), and reused at least for four times without significant loss in activity.     

Cubic Siloxanes with Both Si−H and Si−OtBu Groups for Site‐Selective Siloxane Bond Formation

Cage‐type siloxanes have attracted increasing attention as building blocks for silica‐based nanomaterials as their corners can be modified with various functional groups. Cubic octasiloxanes incorporating both Si?H and Si?OtBu groups [(tBuO)_nH_8?nSi₈O₁₂; n=1, 2 or 7] have been synthesized by the reaction of octa(hydridosilsesquioxane) (H₈Si₈O₁₂) and tert‐butyl alcohol in the presence of a Et₂NOH catalyst. The Si?H and Si?OtBu groups are useful for site‐selective formation of Si?O?Si linkages without cage structure deterioration. The Si?H group can be selectively hydrolyzed to form a Si?OH group in the presence of Et₂NOH, enabling the formation of the monosilanol compound (tBuO)₇(HO)Si₈O₁₂. The Si?OH group can be used for either intermolecular condensation to form a dimeric cage compound or silylation to introduce new reaction sites. Additionally, the alkoxy groups of (tBuO)₇HSi₈O₁₂ can be treated with organochlorosilanes in the presence of a BiCl₃ catalyst to form Si?O?Si linkages, while the Si?H group remains intact. These results indicate that such bifunctional cage siloxanes allow for stepwise Si?O?Si bond formation to design new siloxane‐based nanomaterials.     

H2 Formation on Cosmic Grain Siliceous Surfaces Grafted with Fe+: A Silsesquioxanes‐Based Computational Model

Cosmic siliceous dust grains are involved in the synthesis of H₂ in the inter‐stellar medium. In this work, the dust grain siliceous surface is represented by a hydrogen Fe‐metalla‐silsesquioxane model of general formula: [Fe(H₇Si₇O_12?n)(OH)_n]⁺ (n=0,1,2) where Fe⁺ behaves like a single‐site heterogeneous catalyst grafted on a siliceous surface synthesizing H₂ from H. A computational analysis is performed using two levels of theory (B3LYP‐D3BJ and MP2‐F12) to quantify the thermodynamic driving force of the reaction: [Fe‐T7H₇]⁺+4H→[Fe‐T7H₇(OH)₂]⁺+H₂. The general outcomes are: 1) H₂ synthesis is thermodynamically strongly favored; 2) Fe‐H / Fe‐H₂ barrier‐less formation potential; 3) chemisorbed H‐Fe leads to facile H₂ synthesis at 20≤T≤100 K; 4) relative spin energetics and thermodynamic quantities between the B3LYP‐D3BJ and MP2‐F12 levels of theory are in qualitative agreement. The metalla‐silsesquioxane model shows how Fe⁺ fixed on a siliceous surface can potentially catalyze H₂ formation in space.     

One‐Pot Synthesis of 5,7,8,9,9a,10‐Hexahydro‐8‐thioxotetrahydropyrido[2,3‐d : 6,5‐d′]dipyrimidine‐2,4,6(1H,3H,5aH)‐triones via a Four‐Component Coupling Reaction of Aldehydes,Amines, Barbituric Acids,and Thiouracil

An efficient one‐pot approach to the synthesis of 5,7,8,9,9a,10‐hexahydro‐8‐thioxopyrido[2,3‐d : 6,5‐d′]dipyrimidine‐2,4,6(1H,3H,5aH)‐triones 5 via a four‐component reaction of an aldehyde 1 , an amine 2 , a barbituric acid 3 , and thiouracil ( 4 ) is reported for the first time. This new multicomponent reaction is accomplished in refluxing EtOH in the presence of tungstophosphoric acid (H₃PW₁₂O₄₀) as a catalyst. A variety of hexahydropyrido[2,3‐d : 6,5‐d′]dipyrimidinetrione derivatives were successfully synthesized in excellent yields with this protocol (Table 2).     

Continuous Dehydrogenation of n‐Pentanol over a Cr Modified Cu/γ‐Al2O3‐La2O3 Catalyst

The oxidant‐free dehydrogenation of n‐pentanol over copper based catalysts was investigated in this paper. The effect of metal modification on the activity and stability of the copper catalyst supported on γ‐Al₂O₃ and La₂O₃ (Cu/γ‐Al₂O₃‐La₂O₃) was clarified and a Cr modified Cu/Al₂O₃‐La₂O₃ (Cu‐Cr/γ‐Al₂O₃‐La₂O₃) showed the best catalytic performance. The conversion of n‐pentanol was 70.0% and the selectivity for n‐pentanal increased to 97.1% over Cu‐Cr/γ‐Al₂O₃‐La₂O₃. X‐ray diffraction and temperature programmed reduction of H₂ indicated that the addition of Cr favors the formation and reduction of the copper oxide, and the dispersion of the active Cu⁰ species, accounting for the good activity and stability of this catalyst. Furthermore, the lower amount of acidic sites in Cu‐Cr/γ‐Al₂O₃‐La₂O₃ is suggested to suppress the dehydration in oxidant‐free dehydrogenation of n‐pentanol, accounting for the higher selectivity for n‐pentanal.     

2‐Methyl‐1,3‐disulfoimidazolium polyoxometalate hybrid catalytic systems as equivalent safer alternatives to concentrated sulfuric acid in nitration of aromatic compounds

Ionic liquid‐derived polyoxometalate salts [mdsim]₃[PM₁₂O₄₀] (where M = W and Mo) of two heteropolyacids H₃PW₁₂O₄₀.nH₂O and H₃PMo₁₂O₄₀.nH₂O were synthesized using 2‐methyl‐1,3‐disulfoimidazolium chloride ([mdsim][Cl]) ionic liquid and the corresponding heteropolyacids. Three equivalents of [mdsim][Cl] were treated with the respective Keggin‐structured heteropolyacids (one equivalent) in aqueous medium at room temperature to afford the water‐stable ionic polyoxometalates as acidic solids. They were completely characterized using spectroscopic and other analytical techniques including thermal analysis and Hammett acidity studies. The inherent Brønsted acidic properties of ─SO₃H group of these polyoxometalate salts were studied for the nitration of aromatic compounds with 69% HNO₃ at normal temperature and 80°C without use of any external concentrated sulfuric acid. These strongly acidic polyoxometalates display good recyclability and efficient reusability.     

UV-visible spectroscopic study of solid state 12-molybdophosphoricacid catalyst

Summary UV-visible spectroscopic studies of solid H₃PMo₁₂O₄₀were carried out to elucidate the effect of crystalline water molecules, and in turn, to provide a guideline for utilizing UV-visible spectra of solids to probe reduction potentials of HPA catalysts. UV-visible spectra of reduced/reoxidized H₃PMo₁₂O₄₀were also measured to check the possibility of utilizing UV-visible spectroscopy as a probe of reduction/oxidation states of H₃PMo₁₂O₄₀catalyst. Absorption edges of solid H₃PMo₁₂O₄₀ shifted to longer wavelength with heating to decrease the number of crystalline water molecules. It was also revealed that UV-visible spectra of the H₃PMo₁₂O₄₀catalyst varied in a systematic way depending on the reduction/oxidation states of the H₃PMo₁₂O₄₀catalyst.</o:p>