PMMA colloid particles armored by clay layers with PDMAEMA polymer brushes

Poly[2‐(dimethylamino) ethyl methacrylate] (PDMAEMA) brushes on the surfaces of clay layers were prepared by in situ free‐radical polymerization. Poly (methyl methacrylate) (PMMA) colloid particles stabilized and initiated by clay layers with PDMAEMA polymer brushes were prepared by Pickering emulsion polymerization. Transmission electron microscopy was used to characterize the structure and morphology of the colloid particles. The X‐ray diffraction (XRD) results indicated that the intercalated structures of the clay layers were almost destroyed in Pickering emulsion polymerization, and clay layers with exfoliated structures were created. The surface of the colloid particles was analyzed by using X‐ray photoelectron spectroscopy (XPS). The XPS results provide direct evidence that the clay layers with PDMAEMA chains cover the PMMA colloid particles. © 2008 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 46: 2632–2639, 2008     

Bioadhesive hydrocaffeic acid modified chitosan colloidal particles using as particulate emulsifiers

A kind of bioadhesive hydrocaffeic acid modified chitosan colloidal particles (HCA-CS/TPP CPs) containing synthetic catecholamine groups was prepared via amidation reaction and ionic gelation. The formation process and property of the HCA-CS/TPP CPs were characterized by ultraviolet visible spectrophotometry and Zeta PALS instruments. The prepared HCA-CS/TPP CPs were then used as particulate emulsifier to stabilize Pickering emulsions. The stability of the Pickering emulsion droplet was characterized by digital camera and optical microscope. The results revealed that HCA-CS/TPP CPs exhibited good emulsifying property at a wide pH value range, which will endow the potential application of the Pickering emulsions stabilized by HCA-CS/TPP CPs in various fields.     

Synthesis of PS and PDMAEMA mixed polymer brushes on the surface of layered silicate and their application in pickering suspension polymerization

An ammonium free radical initiator was ion exchanged onto the surface of clay layers. Polystyrene (PS) and poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) mixed polymer brushes on the surface of clay layers were prepared by in situ free radical polymerization. PS colloid particles armored by clay layers with mixed polymer brushes were prepared by Pickering suspension polymerization. Transmission electron microscopy (TEM), atomic force microscopy (AFM), and scanning electron microscopy (SEM) were used to characterize the structure and morphology of the colloid particles. Clay layers on the surface of PS colloid particles can be observed. Because of the cationic nature of the PDMAEMA brushes the colloid particles have positive zeta potentials at low pH values. X‐ray photoelectron spectroscopy (XPS) was used to analyze the surface of the colloid particles. N_1s binding energy of PDMAEMA chains on the surface of clay layers was detected by XPS. The two peaks of the N_1s binding energy indicate two different nitrogen environments on the surface of clay layers. The peak with a lower binding energy is characteristic of neutral nitrogen on PDMAEMA chains, and the peak with a higher binding energy is attributed to protonated nitrogen on PDMAEMA chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5759–5769, 2007     

PMMA colloid particles stabilized by layered silicate with PMMA-b-PDMAEMA block copolymer brushes

The amphiphilic poly(methyl methacrylate-block-2-(dimethylamino)ethyl methacrylate) (PMMA-b-PDMAEMA) block copolymer brushes on the surface of clay layers were synthesized by in situ atom transfer radical polymerization. X-ray diffraction results indicate that both exfoliated and intercalated structure can be found in the nanocomposites. The block copolymer brushes can make different nanopatterns on the surface of clay layers after treatment in different solvents. After treatment in tetrahydrofuran block copolymer brushes form lamella structure on the surface, and after treatment in water surface micelles and wormlike structure can be observed. PMMA colloid particles armored by clay nanocomposites were prepared by suspension polymerization. Transmission electron microscopy and scanning electron microscopy were used to characterize the structure and morphology of the colloid particles. Colloid particles with clay layers around the surface can be observed. X-ray photoelectron spectroscopy (XPS) was used to analyze the surface of the colloid particles. N1s binding energy of PDMAEMA blocks on the surface of clay layers was detected by XPS. The two peaks of the N1s binding energy indicate two different nitrogen environments on the surface of clay layers. The peak with a lower binding energy is characteristic of neutral nitrogen on PDMAEMA blocks, and the peak with a higher binding energy is attributed to protonated nitrogen on PDMAEMA blocks.     

Colloidal assembly: the road from particles to colloidal molecules and crystals

Colloidal particles may be considered as building blocks for materials, just like atoms are the bricks of molecules, macromolecules, and crystals. Periodic arrays of colloids (colloidal crystals) have attracted much interest over the last two decades, largely because of their unique photonic properties. The archetype opal structures are based on close-packed arrays of spheres of submicrometer diameter. Interest in structuring materials at this length scale, but with more complex features and ideally by self-assembly processes, has led to much progress in controlling features of both building blocks and assemblies. The necessary ingredients include colloids, colloidal clusters, and colloidal "molecules" which have special shapes and the ability to bind directionally, the control over short-range and long-range interactions, and the capability to place and orientate these bricks. This Review highlights recent experimental and theoretical progress in the assembly of colloids larger than 50 nm.     

X‐ray powder diffraction of polymer/layered silicate nanocomposites: Model and practice

X‐ray powder diffraction in reflection (Bragg–Brentano parafocusing geometry) is extensively used to characterize the structure of polymer/layered silicate nanocomposites (PLSNs). The large basal spacings (d₀₀₁ > 2.0 nm) necessitates the collection of data at scattering angles (2θ) of less than 10°. The calculation of an ideal scattering profile for PLSNs provides an avenue to ascertain the influence of experimental parameters and the arrangement, organization, concentration, and composition of constituents on the experimentally observed pattern. This enables better experimental technique, more complete utilization of the scattering data, insight into inconsistencies between scattering and microscopy, and minimization of incorrect interpretation or overinterpretation of data. Because of the strong θ dependence of theoretical and experimental factors at low values of 2θ, careful sample preparation and data evaluation are necessary and should be complemented by microscopic observations, especially for PLSNs with low volume fractions of organically‐modified layered silicates (OLS) that are suspected of having exfoliated morphologies. X‐ray powder diffraction in reflection alone is insufficient to completely characterize and ascribe PLSN morphology. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1590–1600, 2002     

Features of composites prepared by radical graft-polymerization of styrene to a hydrophilic macromer adsorbed on ultrafine colloidal particles

Polymer modifications of ultrafine monodispersed colloidal metal oxide particles, smaller than 80 nm in diameter, by the graft-polymerization of styrene to a hydrophilic macromer adsorbed on the surface were investigated. The polymerization in ethanolic silica and titania colloid solution, which had negatively larger ζ-potentials, ?30 and ?42 mV in neutral aqueous solution respectively, gave poly(styrene)–silica or titania composite, being of nonspherical shape. The modifications of colloidal particles, having lower surface energy, such as Al(OH)₃ and CeO₂–TiO₂–SiO₂ complex, led to the formation of spherical composites, ranging in size from 500 to 3000 nm, of scattered metal oxide or hydroxide particles.     

Variation of surface unevenness of anomalous composite polymer particles produced by the stepwise heterocoagulation of small particles onto large particle by heat treatment

Variation of surface unevenness of anomalous composite polymer particles produced by the stepwise heterocoagulation, which we had suggested in previous articles, of small cationic polymer particles onto large anionic polymer particle (LP) by heat treatment was examined with transmission and scanning electron microscopes. When the anomalous polymer emulsion was kept at higher temperature than the glass transition temperature ofLP, the particle surfaces were continuously changed from uneven to smooth state with the treatment time.Part CXLII of the series of Studies on Suspension and Emulsion     

Acetal‐functionalized polymer particles useful for immunoassays. II. Surface and colloidal characterization

Monodisperse polymer colloids with dimethyl and diethyl acetal functionalities were synthesized by a two‐step emulsion polymerization process. The first step consisted of a batch emulsion homopolymerization of styrene (St). The dimethyl and diethyl acetal functionalities were obtained by batch emulsion terpolymerization of St, methacrylic acid (MAA), and methacrylamidoacetaldehyde dimethyl acetal (MAAMA) or methacrylamidoacetaldehyde diethyl acetal (MAADA) in the second step, onto the previously formed polystyrene latex particles. The latexes were characterized by TEM and conductimetric titration, in order to obtain the particle size distribution and the amount of carboxyl and acetal groups on the surface, respectively. The chemical stability of the functionalized surface groups during the storage time was analyzed. The hydrophilic character of the surface of the polymer particles was determined by means of nonionic emulsifier titration. The colloidal stability of the synthesized latexes was studied by measuring the critical coagulation concentration (CCC) against KBr electrolyte, and the existence of a hairy layer on the surface of the latex particles was analyzed by measuring the hydrodynamic particle diameter at several electrolyte concentrations. The surface functionalized groups remained stable for 2 years. The relative hydrophilic character and the colloidal stability were affected by the pH of the medium. On the other hand, the higher the surface charge, the larger the thickness of the hairy layer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 501–511, 1999     

一种具有核-壳结构的聚合物纳米胶粒的制备及其药物运载性能

以丙烯酸异丁酯(IBA)、甲基丙烯酸二甲氨乙酯(DMAEMA)、丙烯酸羟乙酯(HEA)作为聚合单体,利用种子微乳液聚合制备了一种具有核-壳结构的聚合物纳米胶粒P(DMAEMA-co-IBA)/P(IBA-co-HEA);采用红外光谱仪、动态激光光散射仪、透射电镜分析了所得胶粒的结构和形貌;将叶酸成功嵌入聚合物胶粒,得到直径约293nm的球形载药胶粒,利用药物体外释放测定了药物运载性能.结果表明,所制备的共聚物纳米胶粒呈球形,直径约275nm,粒径分布较窄,并具有核-壳结构;其对药物具有缓释性和pH响应性.     

Polymer brushes on multiwalled carbon nanotubes by activators regenerated by electron transfer for atom transfer radical polymerization

The synthesis and characterization of multiwalled carbon nanotube (MWCNT) polymer brushes produced by activators regenerated by electron transfer (ARGET) in atom‐transfer radical polymerization (ATRP) was discussed. The polymer brushes were synthesized by esterification of the MWCNT carboxylic acid groups with hydroxyethyl‐2‐bromoisobutyrate and subsequently used in ARGET ATRP. This created a well defined living polymer brush carbon nanotube of comparatively low polydispersity and a polymer layer 10 nm thick. As, ARGET ATRP uses only minute concentrations of copper (II) catalyst, and is less sensitive to air compared to other living polymerization techniques, this process is a more industry‐compatible route for the commercialization of such materials. The structural and chemical properties were explored by a range of techniques including high resolution transmission electron microscopy, gel permeation chromatography, elemental analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. In addition, the polymer brush nanotubes were explored for their potential use in films and as fillers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of core-shell polymer colloid particles by encapsulation

 By means of heterocoagulation anionic poly-[styrene] particles were coated with smaller electrosterically stabilised cationic particles of poly-[butyl methacrylate]. On heating the heterocoagulated units 45 °C above the glass transition temperature of poly-[butyl methacrylate], as predicted theoretically, the latter polymer spread over the surface of the poly-[styrene] particle to give a composite particle with a core-shell structure. It was found that the extent of packing of the small particles on the larger core particle was a critical feature of the coating process. Received: 12 September 1996 Accepted: 18 September 1996     

碳酸钙微粒稳定的橄榄油/水乳液及其缓释性能

1907年,Pickering发现超细固体颗粒对乳液具有一定的稳定作用~([1]).此后,由固体颗粒单独稳定的乳状液也被称为Pickering乳液.Pickering乳液在新材料合成、生物活性分子保护、食品和医药等领域具有重要的应用价值~([2-7]).     

Polymeric and colloidal features of latex particles with surface amino groups obtained by semicontinuous seeded cationic emulsion polymerization*

Monodisperse latex particles with different amounts of surface amino and amidine groups were synthesized by means of a semicontinuous seeded cationic emulsion polymerization of styrene and a cationic monomer. High partial overall conversions for styrene and limited ones for the cationic monomer were achieved. A reliable method for the quantification of surface amidine and amino groups was developed. It was found that the amount of surface amidine groups provided by the cationic initiator was higher when the amount of cationic monomer added increased. The value for the partition coefficient of the cationic monomer indicated that this polymerizes with the same probability in the water phase as in the particle. The colloidal stability, in terms of critical coagulation concentration, shows that the latexes would be useful as polymeric supports in immunoassays. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3878–3886, 2005     

Synthesis and characterization of monodisperse porous polymer particles

Monodisperse porous polymer particles in the size range of 10 μm in diameter were prepared via seeded emulsion polymerization. Linear polymer (polystyrene seed) or a mixture of linear polymer and solvent or nonsolvent were used as inert diluents. The pore diameters of these porous polymer particles were on the order of 1000 Å with pore volumes up to 0.9 mL/g and specific surface areas up to 200 m²/g. The physical features of the porous polymer particles depended on the diluent type and the crosslinker content, as well as the molecular weight of polymer seed particles. By varying the molecular weight of the linear polymer, monodisperse porous polymer particles with different pore size distribution could be synthesized. Polymer seed with a low degree of crosslinking instead of linear polymer could also be used to prepare monodisperse porous polymer particles with smaller pore volume and pore size.     

Collapse‐expansion transition of elastic shell induced by grafted polymer chains

A coarse‐grained model for an elastic shell grafted with polymer chains is investigated by molecular dynamics methods. With increasing the number of grafted polymer chains (GPCs), it is found that the conformation of the shell undergoes from expansion to collapse and back to the expansion. By varying the density of the GPCs, the phase transition of the elastic shell can be successfully controlled at moderate bending energy of the shell and at moderate binding energy between the shell and GPCs. Furthermore, the self‐assembly structures of the GPCs are also affected by the elastic shell in certain conditions. In the case of a few GPCs on the shell, the chains tend to be adsorbed on the shell surface unfolded at high value of bending energy. However, when the bending energy is small, the chains can be folded several times easily. This may be an important step toward a deeper understanding of how to control the microstructure in the production of biocomposites. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Facile fabrication and self‐assembly of polystyrene–silica asymmetric colloid spheres

This study presents a very simple method to fabricate organic–inorganic asymmetric colloid spheres. In this approach, when silica particles are used as the Pickering emulsifier to stabilize the monomer droplets (styrene) in water via acid–base interaction between silica particles and auxiliary monomer (1‐vinylimidazole), the exposed surfaces of silica particles are very easy to be locally modified with 3‐(trimethoxysilyl)propyl methacrylate. When water‐based initiator is added, polystyrene–silica asymmetric colloid spheres are highly yielded. The sizes of silica and polymer particles can be tunable. These organic–inorganic anisotropic colloid spheres can self‐assemble into an interesting thickness‐dependent film. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Hollow microspheres with covalent‐bonded colloidal and polymeric shell by Pickering emulsion polymerization

Hollow microspheres with SiO₂/polymer binary shell were fabricated from Pickering emulsion stabilized solely by methacryloxypropyltrimethoxysilane‐modified SiO₂ particles, and were characterized by optical microscopy, scanning electron microscopy, Fourier transformation infrared spectrum, thermogravimetric analysis (TGA), and energy dispersive X‐ray spectroscopy. The microspheres were templated by the Pickering droplets and the inner structure was affect by the proportion of crosslinking reagent. TGA result indicated that 60.3% of polymer in the shell was connected with SiO₂ by covalent bond which was formed by copolymerization of styrene and the reactive C?C group on SiO₂ stabilizer. Copyright © 2011 John Wiley & Sons, Ltd.     

An effective cross-linking of polymer layer on monodisperse, poly(maleic anhydride-styrene)-modified colloidal silica particles and properties of the composite

Summary  The cross-linkings of the surface polymer layer on mono disperse, poly(maleic anhydride-styrene)-modified silica particles by the reaction with diisocyanate were studied. The extent of cross-linking was estimated by the weight decrease by immersing the particles in the buffer solution of pH 2.0, 4.0 and 9.0 at a room temperature for 24 h. The reaction of the polymer-modified silica with 1,6-diisocyanatohexane afforded relatively stable composite particles which lost less than 5 wt% of the polymer in aqueous solution in the pH range 2.0–9.0. The diisocyanate was a preferable cross-linker to 2,4-diisocyanatotoluene in terms of stability in acidic or basic aqueous solution. The flexibility of the cross-linker molecule possibly plays an important role in the cross-linking reaction. The carboxyl and amino groups were formed by treating the cross-linked composite particles with diluted HCl solution; 5–6 and 0.5–1.1 μmol g^-1, respectively. The cross-linked composite particles exhibited the characteristic property of ζ-potential, −44 to −47 mV and −102 to −107 mV in a neutral aqueous solution and ethanol, respectively. Received: 26 May 1997 Accepted: 4 August 1997     

表面接枝亲水性聚合物刷磁性微球的制备及其对蜂蜜中四环素类抗生素残留的磁分散固相萃取

采用电子转移活化再生催化剂原子转移自由基聚合法（ARGET-ATRP）在磁性微球（MMs）表面连续接枝了聚碱类聚合物和聚乙二醇刷。首先将MMs包覆硅胶,接枝氨基,然后在其表面接枝溴引发剂,最后在MMs表面进行聚合,制备了亲水性聚合物刷磁性微球（HMMs）。通过透射电镜、傅里叶变换红外光谱对HMMs进行表征,并研究了HMMs对蛋白质的吸附性能。结果表明,合成的HMMs粒径较为均一,分散性良好并且具有良好的抗蛋白质吸附性能。利用制备的HMMs,采用磁分散固相萃取（MDSPE）-高效液相色谱法（HPLC）测定了蜂蜜中四环素类抗生素（TCs）残留。TCs的平均回收率为85.8%~94.5%,方法的检出限和定量限分别为1.92~2.56 μg/kg和6.40~8.53 μg/kg。该方法成功地用于蜂蜜中TCs残留的快速分离富集。