Fabrication of collagen immobilized electrospun poly (vinyl alcohol) scaffolds

In the development of tissue engineering scaffolds, the interactions between material surface and cells play crucial roles. The biomimetic 3‐D scaffolds absolutely provide better results for fulfilling requirements such as porosity, interconnectivity, cell attachment and proliferation. In this study, 3‐D electrospun scaffolds were prepared by using an electrospinning technique. Photo cross‐linkable polyvinyl alcohol was used as a polymeric matrix. During the electrospinning, the nanofibers were cross‐linked with in situ ultraviolet radiation. The crosslinked polymer fibers were achieved in a simple process at a single step. Nanofiber surface was modified with collagen by a chemical approach. The chemical structures were proven by attentuated total reflectance Fourier transform infrared spectroscopy and proton nuclear magnetic resonance. The surface morphology of the nanofibers was characterized by scanning electron microscope (SEM). Morphological investigations show that the resulting nanofibrous matrix has uniform morphology with a diameter of 220–250 nm. In vitro attachment and growth of 3T3 mouse fibroblasts and human umbilical vein endothelial cells (ECV304) cells on polyvinyl alcohol‐based nanofiber mats were also investigated. Cell attachment, proliferation, and methylthiazole tetrazolium cytotoxicity assays indicated good cell viability throughout the culture time, which was also confirmed by SEM analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Fabrication and properties of mineralized collagen‐chitosan/hydroxyapatite scaffolds

A hydroxyapatite (HAp)/biopolymer composite scaffold was fabricated by mineralizing a crosslinked collagen/chitosan, which was pre‐mineralized with Ca²⁺ and phosphate salts, in simulated body fluid (SBF) for only 24 hr. A self‐organized structure similar to bone is expected. Microstructures of the crosslinked collagen/chitosan scaffold, the pre‐mineralized collagen–chitosan scaffold (CCS), and the mineralized collagen‐chitosan/HAp scaffolds (MCCHS) were characterized by scanning electron microscopy (SEM), revealing non‐alteration of the porous structure and formation of the HAp particles. X‐ray diffractometer (XRD) confirmed the crystalline structure of the HAp. Thermal gravimetric analysis found that more HAp particles were formed when the CCSs were pre‐mineralized in a higher concentration of Ca²⁺. Water‐uptake ratio of the crosslinked CCS was ～160, decreased to ～120 after incubating in Ca²⁺ solution, and further decreased to ～20 after mineralization. Mechanical strength of the CCS was improved significantly after the in situ mineralization too. The method introduced here may be potentially applied to obtain other biopolymer/HAp composite in a short period. Copyright © 2008 John Wiley & Sons, Ltd.     

Fabrication of 3D electrospun structures from poly(lactide‐co‐glycolide acid)–nano‐hydroxyapatite composites

The fabrication of three‐dimensional (3D) electrospun composite scaffolds was presented in this study. Layers of electrospun meshes made from composites of poly(lactide‐co‐glycolide acid) (PLGA) and hydroxyapatite (HA) were stacked and sintered using pressurized gas. Three HA concentrations of 5, 10, and 20 wt % were tested, and the addition of the HA nanoparticles decreased the tensile mechanical properties of the meshes with 20 wt % HA. However, after the gas absorption process, the fibers within the mesh sintered, which improved the mechanical properties more than twofold. The fabrication of 3D, porous, electrospun scaffolds was also demonstrated. The resulting 3D scaffolds had open porosity of up to 70% and modulus of ～20 MPa. This technique improves on the current electrospinning technology by overcoming the challenges of depositing a thick, 3D structure. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Diameter control of electrospun polyacrylonitrile/iron acetylacetonate ultrafine nanofibers

Electrospinning is the process of producing ultrafine fibers by overcoming the surface tension of a polymer solution using high voltage. In this work, the effects of both solution properties (viscosity, conductivity, and surface tension) and operational conditions (voltage, feed rate, and spinneret‐collector distance), on the structure of electrospun polyacrylonitrile nanofibers, were systematically investigated. Iron acetylacetonate was added to the electrospinning solution to control fiber diameter by selectively adjusting solution properties. It was found that, with increased salt concentration, the fiber diameter increases and then passes through a maximum due to changes in solution viscosity, conductivity, and surface tension. In addition, the fiber diameter increases with increase in voltage, feed rate, and spinneret‐collector distance. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1611–1618, 2008     

Hybrid polystyrene based electrospun fibers with spin‐crossover properties

We have succeeded in the preparation of electrospun fibers of polystyrene incorporating a metallo‐organic polymer of [Fe (II) (4‐octadecyl‐1,2,4‐triazole)₃(ClO₄)₂]n. The obtained fibers have diameters in the range 2–4 µm and show the characteristic spin‐crossover transition associated with the metallo‐organic polymer. The structure of both, polystyrene and the metallo‐organic polymer, in the fibers was also studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 814–821     

Gamma irradiation of electrospun poly(ε‐caprolactone) fibers affects material properties but not cell response

Fabrication of electrospun fibrous scaffolds as future medical devices is being widely researched, with particular emphasis given to their material properties and effect on cell response and differentiation. However, the vast majority of these scaffolds are sterilized via nonmedically approved methods, including submersion in ethanol and exposure to UV light. Although these techniques are adequate for laboratory‐based research, they are not sufficient for human implantation. In this case, regulatory approved, medical grade sterilization is required. In this study, we report the effects of gamma irradiation, a regulatory approved technique, on electrospun poly(ε‐caprolactone) fibers. Fabricated fibers were separately subjected to different dosages of irradiation ranging from 0 to 45 kGy and then assessed for their physicochemical properties. Gamma irradiation affected fiber properties irrespective of dosage. A dose‐dependent decrease in polymer molecular weight was observed and an increase in melting point and crystallinity reported. Similarly, irradiation had a significant effect on mechanical properties with greatest decrease in tensile strength (68%) for fibers exposed to 40 kGy. The method of sterilization had no effect on cell response. Seeded tenocytes attached to all fibers and elongated parallel to the underlying fiber direction. The results demonstrate the importance of incorporating medical grade sterilization procedures early in the research projects time line to assist translation from bench to clinic. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Biofunctional properties of polyester fibers grafted with chitosan and collagen

Poly(ethylene terephthalate) (PET) fiber was treated with ⁶⁰Co-γ-ray and grafted with acrylic acid (AA). The resulting fibers were further grafted with chitosan (CS) via esterification. Afterward collagen (COL) was immobilized onto CS-grafting fibers. The antibacterial activity of CS against Staphylococus aureus, Escherichia coli, and Pseudomonas aeruginosa was preserved after COL-immobilization. After immobilizing COL, the L929 fibroblasts cell proliferation was promoted than CS-grafting PET fiber. The results indicate that by grafting with CS and immobilizing with COL, PET fibers exhibited both antibacterial activity against four pathological bacteria and improvement in the proliferation of fibroblast. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation of submicron‐scale,electrospun cellulose fibers via direct dissolution

Cellulose nonwoven mats of submicron‐sized fibers (150 nm–500 nm in diameter) were obtained by electrospinning cellulose solutions. A solvent system based on lithium chloride (LiCl) and N,N‐dimethylacetamide (DMAc) was used, and the effects of (i) temperature of the collector, (ii) type of collector (aluminum mesh and cellulose filter media), and (iii) postspinning treatment, such as coagulation with water, on the morphology of electrospun fibers were investigated. The scanning electron microscopy (SEM) and X‐ray diffraction studies of as‐spun fibers at room temperature reveal that the morphology of cellulose fibers evolves with time due to moisture absorption and swelling caused by the residual salt and solvent. Although heating the collector greatly enhances the stability of the fiber morphology, the removal of salt by coagulation and DMAc by heating the collector was necessary for the fabrication of dry and stable cellulose fibers with limited moisture absorption and swelling. The presence and removal of the salt before and after coagulation have been identified by electron microprobe and X‐ray diffraction studies. When cellulose filter media is used as a collector, dry and stable fibers were obtained without the coagulation step, and the resulting electrospun fibers exhibit good adhesion to the filter media. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1673–1683, 2005     

Phosphorylated chitosan‐cobalt complex: A novel green flame retardant for polylactic acid

The exploration of green flame retardants is of great significance for fire safety, ecological environment protection, and resource saving. Herein, a novel phosphorus containing chitosan‐cobalt complex (CS‐P‐Co) was successfully synthesized for the first time and then introduced into polylactic acid matrix. Owning to the formation of cobalt salts, the CS‐P‐Co exhibits good thermal stability and catalytic char effect. The as‐fabricated biodegradable polylactic acid/CS‐P‐Co composites with small amounts of CS‐P‐Co (≤ 4.0 wt%) show remarkably improved flame retardancy, such as decreased peak heat release rate and total heat release by 23.0% and 20.0%, respectively. Scanning electron microscopy, Thermogravimetric analysis, and Raman results demonstrate that compact graphitized char layers are formed on the composite surface during combustion, attributed to the catalytic effect of CS‐P‐Co. The char inhibits diffusion of heat, mass, and oxygen, which plays a key role in the flame retardancy enhancement.     

Non‐Woven Fibrous Materials with Antibacterial Properties Prepared by Tailored Attachment of Quaternized Chitosan to Electrospun Mats from Maleic Anhydride Copolymer

In order to impart antibacterial properties to microfibrous electrospun materials from styrene/maleic anhydride copolymers, quaternized chitosan derivatives (QCh) containing alkyl substituents of different chain lengths are covalently attached to the mats. A complete inhibition of the growth of bacteria, S. aureus (Gram‐positive) and E. coli (Gram‐negative), for a contact time of 30–120 min or a decrease of the bacterial titer by 2–3 log units is observed depending on the quaternization degree, the chain length of the alkyl substituent, and the molar mass of QCh. The modified mats are also effective in suppressing the adhesion of pathogenic S. aureus bacteria.

     

Synthesis of a polyurea from a glucose‐ or mannose‐containing N‐alkyl urea peptoid oligomer

N‐alkyl urea peptoid oligomers containing glucose or mannose have been synthesized and characterized. The oligomers were subsequently polymerized using a step‐growth polymerization with hexamethylene diisocyanate. Equal moles of both monomers were used to guarantee high‐molecular weight polymers. The polymers were characterized by gel permeation chromatography, nuclear magnetic resonance, and Fourier‐transform infrared spectroscopy, and contact angle measurements of solvent cast thin films. Sulfation of the final polymers was achieved using a SO₃/pyridine complex in pyridine to afford the heparin biomimetics. The average degree of sulfation was calculated to be 3.5 sulfates per saccharide as measured by elemental analysis. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5230–5238     

XPS analysis of chitosan–hydroxyapatite biomaterials: from elements to compounds

Chitosan (Cs) and hydroxyapatite (Ha) were analysed by X‐ray photoelectron spectroscopy (XPS). Phosphorylated Cs microparticles and hybrid Cs/Ha microparticles were prepared and analysed by XPS before and after immersion in a solution 1.5 times more concentrated than a simulated body fluid (SBF). The accuracy of spectrum recording, peak decomposition and peak component assignment was insured by a post‐control of charge stabilization, and by the examination of correlations between spectral data guided by stoichiometry and charge balance. The concentration of organic oxygen was determined from the concentrations of the oxidized forms of carbon, allowing a sharper insight into speciation and O 1s peak shape. This indicated that the hydroxide ion of Ha, and hydrogenophosphate if present, give a contribution near 532.4 eV, which overlaps with organic oxygen. As a result of immersion in the 1.5*SBF solution, the formation of CaCO₃ and of Ha material occurred. A quantification could be made for the constituents of biomaterial interest, contaminating salts and paraffin oil residues from the microparticle manufacturing process. The uncertainties regarding the nature of the model calcium phosphate used and the best marker for calcium carbonate were addressed by comparing the possible effect on the output, which was facilitated by using ternary composition diagrams. Whatever their formulation, the native microparticles were found to be coated by a thick layer of paraffin oil. The induction of calcium carbonate and phosphate precipitation or the retention of precipitates by the microparticles was favored by the presence of phosphate in the initial formulation either by phosphorylation or by incorporation of Ha. Copyright © 2013 John Wiley & Sons, Ltd.     

Lyophilized hemoglobin‐albumin cluster with disaccharides: Long‐term storable powder of artificial O2‐carrier

Core‐shell protein cluster comprising a hemoglobin (Hb) in the center and human serum albumins (HSA) at the exterior, Hb‐HSA ₃ cluster, is an artificial O₂‐carrier designed for use as a red blood cell (RBC) substitute. Lyophilization of the Hb‐HSA ₃ cluster solution ([Hb unit] = 5 g/dL) with sucrose and trehalose yielded stable pink powder, which can be stored for 2 years at 4°C. Addition of pure water to the powder regenerated the homogeneous solution. The O₂‐binding properties and oxyHb rate have been unaltered during the storage period. Infrared spectroscopic studies revealed that the hydrogen bond between protein and sugar stabilizes three‐dimensional structure of the cluster.     

Kinetic study of chitosan‐tripolyphosphate complex reaction and acid‐resistive properties of the chitosan‐tripolyphosphate gel beads prepared by in‐liquid curing method

Chitosan gel beads were prepared using an in‐liquid curing method by the ionotropic crosslinking with sodium tripolyphosphate. Crosslinking characteristics of the chitosan‐TPP beads were improved by the modification of in‐liquid curing mechanism of the beads in TPP solution. Chitosan gel beads cured in pH value lower than 6 were really ionic‐crosslinking controlled, whereas chitosan gel beads cured in pH values higher than 7 were coacervation‐phase inversion controlled accompanied with slightly ionic‐crosslinking dependence. According to the result, significantly increasing the ionic‐crosslinking density of chitosan beads could be achieved by transferring the pH value of the curing agent, TPP, from basic to acidic. The swelling behavior of various chitosan beads in acid appeared to depend on the ionic‐crosslinking density of the chitosan‐TPP beads that were deeply affected by the curing mechanism of the beads. The mechanism of chitosan‐TPP beads swollen in weak acid was chain‐relaxation controlled, while the mechanism of chitosan‐TPP beads swollen in strong acid seem to be not only chain‐relaxation but also chain‐scission controlled. Chitosan‐TPP beads prepared in acidic TPP solution decreased the chain‐scission ability due to the increase of ionic crosslinking density of the beads. By the transition of curing mechanism, the swelling degree of chitosan‐TPP beads was depressed, and the disintegration of chitosan‐TPP beads would not occur in strong acid. The mechanism of ionic‐crosslinking reaction of chitosan beads could be investigated by an unreacted core model, and the curing mechanism of the chitosan beads is mainly diffusion controlled when higher than 5% of chitosan was employed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1551–1564, 1999     

Organic–inorganic bonding in chitosan–silica hybrid networks: Physical properties

Novel biomaterials are needed for bone tissue repair with improved mechanical performance compared to classical bioceramics. The objective of this work was to characterize a hybrid filler material, which is capable to coat as a thin film porous scaffolds improving their mechanical properties for bone tissue engineering. The hybrid filler material is a blend of chitosan and silica network formed through in situ sol–gel using tetraethylortosilicate and 3‐glycidoxypropyltrimethoxysilane (GPTMS) as silica precursors. The hypothesis was that the epoxy ring of GPTMS could react with the amino groups of chitosan in acidic media while it is also reacting the siloxane groups of hydrolyzed silica precursors. The formation of the hybrid organic–inorganic network was assessed by different physical techniques revealing changes in molecular mobility and hydrophilicity upon chemical reaction. Finally, the cytotoxicity of the samples was also evaluated by MTT assay. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1391–1400     

Measurement of size‐dependent glass transition temperature in electrospun polymer fibers using AFM nanomechanical testing

The glass transition temperature (T_g) of individual electrospun polymer polyvinyl alcohol fibers of varying diameter was measured using atomic force microscopy (AFM) based nanomechanical thermal analysis. Indentation and bending of individual electrospun fibers using AFM allowed the calculation of the elastic modulus of the polyvinyl alcohol (PVA) fibers across a range of different temperatures. The elastic modulus of electrospun PVA fibers was observed to decrease significantly when passing through T_g, which allowed accurate determination of T_g. The T_g of electrospun PVA fibers was shown to decrease for smaller fiber diameters especially for fiber diameters below 250 nm. This size‐dependent glass transition behavior of electrospun PVA fibers is indicated as being due to polymer chain confinement. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Impact of Electrospinning Parameters and Post-Treatment Method on Antibacterial and Antibiofilm Activity of Chitosan Nanofibers

Chitosan, a natural biopolymer, is an ideal candidate to prepare biomaterials capable of preventing microbial infections due to its antibacterial properties. Electrospinning is a versatile method ideally suited to process biopolymers with minimal impact on their physicochemical properties. However, fabrication parameters and post-processing routine can affect biological activity and, therefore, must be well adjusted. In this study, nanofibrous membranes were prepared using trifluoroacetic acid and dichloromethane and evaluated for physiochemical and antimicrobial properties. The use of such biomaterials as potential antibacterial agents was extensively studied in vitro using Staphylococcus aureus and Escherichia coli as test organisms. The antibacterial assay showed inhibition of bacterial growth and eradication of the planktonic cells of both E. coli and S. aureus in the liquid medium for up to 6 hrs. The quantitative assay showed a significant reduction in bacteria cell viability by nanofibers depending on the method of fabrication. The antibacterial properties of these biomaterials can be attributed to the structural modifications provided by co-solvent formulation and application of post-treatment procedure. Consequently, the proposed antimicrobial surface modification method is a promising technique to prepare biomaterials designed to induce antimicrobial resistance via antiadhesive capability and the biocide-releasing mechanism.