Synthesis of poly(p‐phenylene vinylene)‐ and poly(phenylene ethynylene)‐based polymers containing p‐terphenyl in the main chain with alkoxyphenyl side groups

Starting from the pyrylium salt and following a facile synthetic route, we synthesized and polymerized 4,4″‐diiodo‐2′,6′‐di[4‐(2′‐ethylhexyl)oxy]phenyl‐p‐terphenyl with p‐divinylbenzene or p‐diethynylbenzene. The resulting polymers had moderate molecular weights, were amorphous, and dissolved in tetrahydrofuran and chloroform, with glass‐transition temperatures of 120–131 °C. The polymers behaved as violet‐blue‐emitting materials with photoluminescence maxima around 420 and 450 nm in solution and in thin films, respectively. They possessed well‐defined chromophores resulting from steric interactions in the polymer chain. The photoluminescence quantum yields were up to 0.29. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2591–2600, 2002     

Water‐soluble poly(ethylene oxide)‐block‐poly(p‐phenylene vinylene) copolymer: Synthesis and characterization

Water‐soluble and photoluminescent block copolymers [poly(ethylene oxide)‐block‐poly(p‐phenylene vinylene) (PEO‐b‐PPV)] were synthesized, in two steps, by the addition of α‐halo‐α′‐alkylsulfinyl‐p‐xylene from activated poly(ethylene oxide) (PEO) chains in tetrahydrofuran at 25 °C. This copolymerization, which was derived from the Vanderzande poly(p‐phenylene vinylene) (PPV) synthesis, led to partly converted PEO‐b‐PPV block copolymers mixed with unreacted PEO chains. The yield, length, and composition of these added sequences depended on the experimental conditions, namely, the order of reagent addition, the nature of the monomers, and the addition of an extra base. The addition of lithium tert‐butoxide increased the length of the PPV precursor sequence and reduced spontaneous conversion. The conversion into PPV could be achieved in a second step by a thermal treatment. A spectral analysis of the reactive medium and the composition of the resulting polymers revealed new evidence for an anionic mechanism of the copolymerization process under our experimental conditions. Moreover, the photoluminescence yields were strongly dependant on the conjugation length and on the solvent, with a maximum (70%) in tetrahydrofuran and a minimum (<1%) in water. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4337–4350, 2005     

Ionic poly(p‐phenylene terephthalamide)s: Preparation and characterization

The preparation and characterization of two types of ionic poly(p‐phenylene terephthalamide) (PPTA) is described. A sufficient number of ionic groups were added to render modified PPTA soluble in dimethylsulfoxide (DMSO). In one type, a hydrogen atom of the amide group was replaced by an ionic propanesulfonate group. In the other type, one of the hydrogen atoms on the phenylene ring was replaced by an ionic sulfonate group. The ionic PPTAs in DMSO showed an upturn in viscosity at very low concentrations that was characteristic of the polyelectrolyte behavior. Fourier transform infrared spectra of these samples were also studied. When the ionic group was attached at the end of the short propane side chain, the intensity of both the free and hydrogen‐bonded N? H stretching mode was reduced compared with that of PPTA. Depending on the location of the ionic group, there were some changes in the intensity and wave number of the asymmetric and symmetric vibrations of the ionic SO group and the stretching mode of the carbonyl group. In both ionic PPTAs, there was an upward shift in the frequency of the symmetric vibrations of the sulfonate ion when the counterion, having been monovalent, became divalent. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2653–2663, 2001     

Photoluminescent,liquid‐crystalline,and electrochemical properties of para‐phenylene‐based alternating conjugated copolymers

Novel liquid‐crystalline alternating conjugated copolymers [ P(P(6)CN‐alt‐Cz) and P(P(6)CN‐alt‐MeP) ] with phenylene and carbazolylene or phenylene with methyl substitution onto the main chain have been synthesized through palladium‐catalyzed Suzuki coupling reactions. The influence of the incorporation of carbazolylene and the substituted phenylene into the main chain on the thermal, mesomorphic, and luminescent properties has been investigated by Fourier transform infrared spectroscopy, thermogravimetry, differential scanning calorimetry, polarized optical microscopy, ultraviolet–visible spectroscopy, photoluminescence (PL), and cyclic voltammetry. These polymers show highly thermal stability, losing little of their weights when heated to 360 °C. The conjugated copolymers exhibit liquid crystallinity at elevated temperature. The existence of the chromophoric terphenyl core endows the copolymers with high PL and the polymer P(P(6)CN‐alt‐Cz containing carbazolylene unit can emit more pure blue light. All the copolymer films with low band gaps about 2.3–2.4 eV undergo reversible oxidation and reduction processes, significantly lower than the band gap of poly(p‐phenylene). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 434–442, 2010     

Synthesis and properties of mesogen‐jacketed liquid crystalline polymers containing bistolane mesogen

On the basis of the concept of mesogen‐jacketed liquid crystalline polymers, a series of new methacrylate monomers, (2,5‐bis[2‐(4′‐alkoxyphenyl) ethynyl] benzyl methacrylate (MACn, n = 4, 6, 8, 10, and 12) and 2,5‐bis[2‐(6′‐decanoxynaphthyl) ethynyl] benzyl methacrylate (MANC10), and their polymers, PMACn (n = 4, 6, 8, 10, and 12) and PMANC10 were synthesized. The bistolane mesogen with large π‐electron conjugation were side‐attached to the polymer backbone via short linkages. Various characterization techniques such as differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized light microscopy were used to study their mesomorphic phase behavior. The polymer PMACn with shorter flexible substituents (n = 4) forms the columnar nematic (?_N) phase, but other polymers with longer flexible tails (n = 6, 8, 10, and 12) can develop into a smetic A (S_A) phase instead of a ?_N phase. The PMANC10 containing naphthyl can also form a well‐defined S_A phase. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A novel type of optically active helical polymers: Synthesis and characterization of poly(N‐propargylureas)

This article presents two novel artificial helical polymers, substituted polyacetylenes with urea groups in side chains. Poly( 4 ) and poly( 5 ) can be obtained in high yields (≥97%) and with moderate molecular weights (11,000–14,000). Poly( 4 ) contains chiral centers in side chains, and poly( 5 ) is an achiral polymer. Both of the two polymers adopted helical structures under certain conditions. More interestingly, poly( 4 ) exhibited large specific optical rotations, resulting from the predominant one‐handed screw sense. The helical conformation in poly( 5 ) was stable against heat, while poly( 4 ) underwent conformational transition from helix to random coil upon increasing temperature from 0 to 55 °C. Solvents had considerable influence on the stability of the helical conformation in poly( 4 ). The screw sense adopted by the helices was also largely affected by the nature of the solvent. Poly( 4 ‐co‐ 5 )s formed helical conformation and showed large optical rotations, following the Sergeants and Soldiers rule. By comparing the present two polymers (with one ? N? H groups) with the three polymers previously reported (with two ? N? H groups in side chains), the nature of the hydrogen bonds formed between the neighboring urea groups played big roles in the formation of stable helical conformation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4112–4121, 2008     

Synthesis and properties of mesogen‐jacketed liquid crystalline polymers containing biphenyl mesogen with asymmetric substitutions

This work focuses on the design, synthesis, and characterization of a series of mesogen‐jacketed liquid crystalline polymers (MJLCPs), poly(alkyl 4′‐(octyloxy)‐2‐vinylbiphenyl‐4‐carboxylate) (pVBP(m,8), m = 1, 2, 4, 6, 8, 10, 12). For the first time, we realized asymmetric substitutions in the mesogens of MJLCPs. The polymers obtained by conventional free radical polymerization were investigated in detail by a combination of various techniques, such as differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized light microscopy. Our results showed that all the polymers were thermally stable, and their glass transition temperatures decreased when m increased. The liquid crystalline (LC) phases that developed at high temperatures and disappeared at low temperatures were strongly dependent on the difference in lengths of alkyl groups on the 4 and 4′ substitution positions of the side‐chain biphenyl. While polymer pVBP(1,8) was not liquid crystalline, columnar liquid crystalline phases were observed for all other pVBP(m,8) (m = 2, 4, 6, 8, 10, 12) polymers. Polymer pVBP(8,8) showed a tetragonal columnar nematic liquid crystalline phase, and the other LC polymers exhibited columnar nematic phases. In additions, the smaller the difference in the lengths of the terminal alkyls, the easier the development of the liquid crystalline phase. Birefringence measurements showed that solution‐cast polymer films exhibited moderately high positive birefringence values, indicating potential applications as optical compensation films for liquid crystal displays. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and Characterization of Cross‐Linked Poly(p‐phenylene ethynylene)s

Summary: Conjugated poly(p‐phenylene ethynylene) networks with interesting optoelectronic properties were synthesized by the palladium‐catalyzed polycondensation of 2,5‐diiodo‐4‐[(2‐ethylhexyl)oxy]methoxybenzene, and 1,4‐diethynyl‐2,5‐bis‐(octyloxy)benzene, with 1,2,4‐tribromobenzene as cross‐linker. The cross‐linker concentration was varied and materials with different cross‐link densities were prepared. The materials were processed into films by simultaneous polymerization and shaping. An alternative approach is to synthesize these cross‐linked polymers in the form of spherical particles, which can be processed from dispersions.

Schematic representation of the cross‐linking process.     

Novel route to poly(p‐phenylene vinylene) polymers

Poly(p‐phenylene vinylene) (PPV), poly(2,5‐dioctyl‐p‐phenylene vinylene) (PDOPPV), and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylene vinylene] (MEHPPV) were synthesized by a liquid–solid two‐phase reaction. The liquid phase was tetrahydrofuran containing 1,4‐bis(bromomethyl)benzene, 1,4‐bis(chloromethyl)‐2,5‐dioctylbenzene, or 1,4‐bis(chloromethyl)‐2‐methoxyl‐5‐(2′‐ethylhexyloxy)benzene as the monomer and a certain amount of tetrabutylammonium bromide as a phase‐transfer catalyst. The solid phase consisted of potassium hydroxide particles with diameters smaller than 2 mm. The experimental results demonstrated that the reaction conversions of PPV and PDOPPV were fairly high (～65%), but the conversion of MEHPPV was only 45%. Moreover, gelation was found in the polymerization processes. As a result, PPV was insoluble and PDOPPV and MEHPPV were partially soluble in the usual organic solvents, such as tetrahydrofuran and chloroform. Soluble PDOPPV and MEHPPV were obtained with chloromethylbenzene or bromomethylbenzene as a retardant regent. The molar mass of soluble PDOPPV was measured to be 2 × 10⁴ g mol^?1, and that of MEHPPV was 6 × 10⁴ g mol^?1. A thin, compact film of MEHPPV was formed via spin coating, and it emitted a yellow light. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 449–455, 2003     

Synthesis and liquid crystalline properties of poly(1‐alkyne)s carrying triphenylene discogens

Triphenylene‐containing 1‐decynes with different alkyl chain lengths and their polymers are synthesized and the effects of the structural variables on their mesomorphic properties are investigated. The monomers [HC?C(CH₂)₈CO₂C₁₈H₆ (OC_mH_2m+1)₅; m = 4–9] are prepared by consecutive etherization, coupling, and esterification reactions. The monomers form columnar phases at room temperature. The polymerizations of the monomers are effected by [Rh(nbd)Cl]₂, producing soluble polymers in high yields (up to 84%). The structures and properties of the polymers are characterized and evaluated by IR, NMR, TGA, DSC, POM, and XRD analyses. All the polymers are thermally stable, losing little of their weights when heated to 300 °C. The isotropization temperature of the polymers increases initially with the length of alkyl chain but decreases on further extension. Although the polymers with shorter and longer alkyl chain lengths adopt a homogeneous hexagonal columnar structure, those with intermediate ones form mesophases with mixed structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2960–2974, 2008     

Synthesis and characterization of side‐chain liquid crystalline polymers bearing cholesterol mesogen

A series of new norbornene carboxylic cholesteryl ester monomers with and without alkyl spacers, NBCh, and NBCh‐n , respectively, were synthesized. New side‐chain liquid crystalline homopolymers, PNBCh and PNBCh‐n , were cleanly prepared using NBCh and NBCh‐n , respectively, with Grubbs 2nd generation catalyst. Molecular and structural characterization of monomers and polymers were carried out by nuclear magnetic resonance, NMR, Fourier transform infrared, FT‐IR, spectroscopy, and gel permeation chromatography, GPC. The thermal and liquid crystalline properties of the homopolymers were investigated by differential scanning calorimetry, DSC, thermogravimetric analysis, TGA, and polarized optical microscopy, POM. Small angle and wide angle X‐ray studies of PNBCh‐n in powder and fiber states not only confirmed the formation of smectic A mesophases, but also established their morphologies. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2690–2701, 2009     

Luminescent mesogen jacketed poly(1‐alkyne) bearing lateral terphenyl with hexyloxy tail

Mesogen jacketed liquid crystalline poly(1‐alkyne) and poly(1‐phenyl‐1‐alkyne) linked pendants of terphenyl mesogens with hexyloxy tails at the waist position (? {RC?C? [(CH₂)₃OOC‐terpheyl‐(OC₆H₁₃)₂]}_n? , where R?H, PHATP(OC6)2 ; R?C₆H₅, PPATP(OC6)2 ) were synthesized. The influences of structural variations on the thermal, mesomorphic, and luminescent properties were investigated. Polymerizations of all monomers are carried out by WCl₆‐Ph₄Sn catalysts successfully. The polymers are stable (T_d ≥ 340 °C) and soluble in common solvents. The monomers and polymers show enantiotropic SmA phases in the heating and cooling processes, and the lateral side chains of the mesogenic units are perpendicular to the main chain. The “jacket effect” of chromophoric terphenyl core “shell” around the main chain also contributes to polymers with high photoluminescence, and the pendant‐to‐backbone energy transfer path is involved in the luminescence process of this polymers. In comparison with monosubstituted polyacetylene PHATP(OC6)2 , the disubstituted polyacetylene PPATP(OC6)2 shows better photoluminescence in both THF solution and film, and exhibited about 40 nm red‐shifted than PHATP(OC6)2 , indicating that the “jacket effect” of terphenyl mesogens forces poly(1‐phenyl‐1‐alkyne) backbone to extend in a more planar conformation with a better conjugation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Syntheses and electroluminescence properties of conjugated poly(p‐phenylene vinylene) derivatives bearing dendritic pendants

A series of new poly(p‐phenylene vinylene) derivatives with different dendritic pendants—poly{2‐[3′,5′‐bis(2″‐ethylhexyloxy)benzyloxy]‐1,4‐phenylenevinylene} (BE–PPV), poly{2‐[3′,5′‐bis(3″,7″‐dimethyl)octyloxy]‐1,4‐phenylenevinylene} (BD–PPV), poly(2‐{3′,5′‐bis[3″,5″‐bis(2?‐ethylhexyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene) (BBE–PPV), poly(2‐{3′,5′‐bis[3″,5″‐bis(3?,7?‐dimethyloctyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene) (BBD–PPV), and poly[(2‐{3′,5′‐bis[3″,5″‐bis(2?‐ethylhexyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene)‐co‐(2‐{3′,5′‐bis[3″,5″‐bis(3?,7?‐dimethyloctyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene)] (BBE‐co‐BBD–PPV; 1:1)—were successfully synthesized according to the Gilch route. The structures and properties of the monomers and the resulting conjugated polymers were characterized with ¹H and ¹³C NMR, elemental analysis, gel permeation chromatography, thermogravimetric analysis, ultraviolet–visible absorption spectroscopy, photoluminescence, and electroluminescence spectroscopy. The obtained polymers possessed excellent solubility in common solvents and good thermal stability, with a 5% weight loss temperature of more than 328 °C. The weight‐average molecular weights and polydispersity indices of BE–PPV, BD–PPV, BBE–PPV, BBD–PPV, and BBE‐co‐BBD–PPV (1:1) were in the range of 1.33–2.28 × 10⁵ and 1.35–1.53, respectively. Double‐layer light‐emitting diodes (LEDs) with the configuration of indium tin oxide/polymer/tris(8‐hydroxyquinoline) aluminum/Mg:Ag/Ag devices were fabricated, and they emitted green‐yellow light. The turn‐on voltages of BE–PPV, BD–PPV, BBE–PPV, BBD–PPV, and BBE‐co‐BBD–PPV (1:1) were approximately 5.6, 5.9, 5.5, 5.2, and 4.8 V, respectively. The LED devices of BE–PPV and BD–PPV possessed the highest electroluminescent performance; they exhibited maximum luminance with about 860 cd/m² at 12.8 V and 651 cd/m² at 13 V, respectively. The maximum luminescence efficiency of BE–PPV and BD–PPV was in the range of 0.37–0.40 cd/A. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3126–3140, 2005     

Copoly(p‐phenylene)s containing bipolar triphenylamine and 1,2,4‐triazole groups: Synthesis,optoelectronic properties,and applications

Two novel copoly(p‐phenylene)s ( P1 – P2 ) containing bipolar groups (12.8 and 6.8 mol %, respectively), directly linked hole transporting triphenylamine and electron transporting aromatic 1,2,4‐triazole, were synthesized to enhance electroluminescence (EL) of poly(p‐phenylene vinylene) (PPV) derivatives. The bipolar groups not only enhance thermal stability but also promote electron affinity and hole affinity of the resulting copoly(p‐phenylene)s. Blending the bipolar copoly‐(p‐phenylene)s ( P1 – P2 ) with PPV derivatives ( d6‐PPV ) as an emitting layer effectively improve the emission efficiency of its electroluminescent devices [indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene) (PEDOT):poly(styrenesulfonate) (PSS)/polymer blend/Ca (50 nm)/Al (100 nm)]. The maximum luminance and maximum luminance efficiency were significantly enhanced from 310 cd m^?2 and 0.03 cd A^?1 ( d6‐PPV ‐based device) to 1450 cd m^?2 and 0.20 cd A^?1 (blend device with d6‐PPV / P1 = 96/4 containing ～0.5 wt % of bipolar groups), respectively. Our results demonstrate the efficacy of the copoly(p‐phenylene)s with bipolar groups in enhancing EL of PPV derivatives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Ionic poly(p‐phenylene terephthalamide)s: Solubility and thermal stability

Ionic sulfonate groups were incorporated onto molecules of the rigid‐rod polymer poly(p‐phenylene terephthalamide) (PPTA) in two different positions. In one type, S‐PPTA, ionic sulfonate groups were attached to the phenylene ring of the backbone chain. S‐PPTA solubility was achieved in dimethylsulfoxide (DMSO) when 50% of the repeat units contained an ionic group. In the second type, PPTA‐PS, where ionic propanesulfonate groups served as side chains, solubility was achieved in DMSO when 30% of the repeat units contained the ionic group. For both of the partially sulfonated ionic polymers, the thermal stability was enhanced in comparison with the stability of the acid‐form polymers, but it was less than that of PPTA. The effect was more dramatic when the ionic groups were located at the end of side chains. The nature of the counterion also played a role, with doubly ionized calcium giving the best results. Polarized light micrographs of the ionic PPTA polymers displaced birefringent patterns and indicated that greater rigidity was present when the ionic groups were directly attached to the backbone, rather than at the end of a short side chain. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2888–2897, 2001     

Chirality sensing of chiral pyrrolidines and piperazines with a liquid crystalline dynamic helical poly(phenylacetylene) bearing ethyl phosphonate pendant groups

Stereoregular cis‐transoidal poly(phenylacetylene) bearing a phosphonic acid monoethyl ester as the pendant group (poly‐ 1 ‐H) was found to form a preferred‐handed helix upon complexation with various optically active pyrrolidines and piperazines in dilute dimethyl sulfoxide and water, and the complexes exhibited characteristic induced circular dichroisms (ICDs) in the UV‐vis region of the polymer backbone. The Cotton effect signs in water reflect the absolute configuration of the pyrrolidines. The sodium salt of poly‐ 1 ‐H (poly‐ 1 ‐Na) and poly‐ 1 ‐H in the presence of optically active amines formed lyotropic nematic and cholesteric liquid crystalline phases in concentrated water solutions, respectively, indicating the rigid‐rod characteristic of the polymer main chain regardless of the lack of a single‐handed helix, as evidenced by the long persistence length of about 18 nm before and after the preferred‐handed helicity induction in the polymer. X‐ray diffraction of the oriented films of the nematic and cholesteric liquid crystalline polymers exhibited almost the same diffraction pattern, suggesting that both polymers have the same helical structure; dynamically racemic and one‐handed helices, respectively. On the basis of the X‐ray analysis, a possible helical structure of poly‐ 1 is proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1383–1390, 2010     

Synthesis,characterization, and structure–property investigation of conformationally rigid regioisomers of poly(p‐phenylene ethynylene)s

A series of rigid poly(p‐phenylene ethynylene)s ( PPE1 – PPE4 ) with biphenyl‐ ( M1–M3 ) and phenyl‐ ( M4 ) side groups is prepared from appropriately functionalized monomers. Herein, the solution and solid state absorption studies show the polymers have adopted twisted and rigid conformations, as supported by deep HOMO energy levels (?5.76 to ?5.81 eV). The absorption maxima of PPE1–PPE3 are shifted to shorter wavelength (λ_max = 375–381 nm) as compared to linear poly(p‐phenylene ethynylene)s (446 nm), implying a nonplanar conformation. The self‐assembly of polymers into fibers is examined using scanning electron microscopy. The fibers are not observed in PPE4 with short phenyl side group, suggesting the important role of the interplay between rigidity, position, and size of the side chains toward the formation of fibers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3652–3662     

Influence of fluorinated substituent and terminal length on phase behavior of mesogen‐jacketed liquid crystalline polymers with a biphenyl mesogen

A series of mesogen‐jacketed liquid crystalline polymers, poly{2,2,3,3,4,4,4‐heptafluorobutyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PF3Cm, where m is the number of carbon atoms in the alkoxy groups, and m = 1, 4, 6, and 8), the side chain of which contains a biphenyl core with a fluorocarbon substituent at one end and an alkoxy unit of varying length on the other end, were designed and successfully synthesized via atom transfer radical polymerization. For comparison, poly{butyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PC4Cm), similar to PF3Cm but with a butyl group instead of the fluorocarbon substituent, was also prepared. Differential scanning calorimetric results reveal that the glass transition temperatures (T_gs) of the two series of polymers decrease as m increases and T_gs of the fluorocarbon‐substituted polymers are higher than those of the corresponding butyl‐substituted polymers. Wide‐angle X‐ray diffraction measurements show that the mesophase structures of these polymers are dependent on the number of the carbon atoms in the fluorocarbon substituent and the property of the other terminal substituent. Polymers with fluorocarbon substituents enter into columnar nematic phases when m ≥ 4, whereas the polymer PF3C1 exhibits no liquid crystallinity. For polymers with butyl substituents, columnar nematic phases form when the number of carbon atoms at both ends of the side chain is not equal at high temperatures and disappear after the polymers are cooled to ambient temperature. However, when the polymer has the same number of carbon atoms at both ends of the side chain, a hexagonal columnar phase develops, and this phase remains after the polymer is cooled. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of light‐emitting oligo(p‐phenylene‐vinylene)s and polymeric derivatives containing three‐ and five‐conjugated phenylene rings

Several series of light‐emitting oligo(p‐phenylene‐vinylene)s (BIII and BV series containing three‐ and five‐conjugated phenylene rings) with various side groups and end groups attached to the cores were synthesized and characterized. The analogous PBV polymers, derived from the BV series, were also synthesized and investigated. Blue and greenish light emissions were observed in the photoluminescence (PL) and electroluminescence (EL) spectra of the blend and pure films with these π‐conjugated structures. In contrast to the three‐conjugated ring oligomers, the five‐conjugated ring derivatives (oligomers and polymers) had larger maximum emission wavelength values of PL and EL emissions. Mesomorphism was introduced into the BV series by the replacement of three‐conjugated rings (BIII series) with five‐conjugated phenyl cores (BV series). The liquid‐crystalline properties of the BV series with end groups (on both end rings) were better than those of analogous BV‐OC₈ without end groups. Polarized PL emissions were obtained by the alignment of liquid‐crystalline phase in rubbing cells. Upon heating, different PL emission wavelengths and intensities were observed in various phases. Not only the solubility and thermal properties but also the PL and EL properties could be effectively adjusted by the attachment of flexible alkoxy groups either on the central rings or on both end rings of the conjugated cores. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 783–800, 2006