Determination of main taxoids in Taxus species by microwave‐assisted extraction combined with LC‐MS/MS analysis

A method based on microwave‐assisted extraction (MAE) has been developed for the determination of paclitaxel and five related taxoids, namely 10‐deacetylbaccatin III (10‐DAB III), cephalomannine, 10‐deacetylpaclitaxel (10‐DAT), 7‐xyl‐10‐ deacetylpaclitaxel (7‐xyl‐10‐DAT), and 7‐epi‐10‐deacetylpaclitaxel (7‐epi‐10‐DAT) in Taxus species in this study. The influential parameters of the MAE procedure were optimized, and the optimal conditions were as follows: extraction solvent 80% ethanol solution, solid/liquid ratio 1:10 (g/mL), temperature 50°C, and three extraction cycles, each cycle 10 min. The method validation for LC‐MS/MS analysis was performed. The LOD and LOQ were 3.16–9.20 and 12.20–30.45 ng/mL, respectively. Repeatability and reproducibility for the six taxiods with RSD ranged from 2.78 to 3.85% and from 5.26 to 6.60%. The recoveries of the method for the six taxoids were 92.6–105.6%. The developed MAE‐LC‐MS/MS method was also successfully applied to determine the contents of six taxoids in different Taxus species.     

Determination of a hydrophilic paclitaxel derivative, 7‐xylosyl‐10‐deacetylpaclitaxel in rat plasma by LC–MS/MS

A LC‐MS/MS method for the determination of a hydrophilic paclitaxel derivative 7‐xylosyl‐10‐deacetylpaclitaxel in rat plasma was developed to evaluate the pharmacokinetics of 7‐xylosyl‐10‐deacetylpaclitaxel in the rats. 7‐Xylosyl‐10‐deacetylpaclitaxel and docetaxel (IS for 7‐xylosyl‐10‐deacetylpaclitaxel) were extracted from rat plasma with acetic ether and analyzed on a Hypersil C₁₈ column (4.6 × 150 mm i.d., particle size 5 µm) with the mobile phase of ACN/0.05% formic acid (50:50, v/v). The analytes were detected using an ESI MS/MS in the multiple reaction monitoring mode. The standard curves for 7‐xylosyl‐10‐deacetylpaclitaxel in plasma were linear (r >0.999) over the concentration range of 2.0–1000 ng/mL with a weighting of 1/concentration². The method showed a satisfactory sensitivity (2.0 ng/mL using 50 µL plasma), precision (CV ≤ 10.1%), accuracy (relative error ?12.4 to 12.0%), and selectivity. This method was successfully applied to the pharmacokinetic study of 7‐xylosyl‐10‐deacetylpaclitaxel in rat plasma after intravenous administration of 7‐xylosyl‐10‐deacetylpaclitaxel to female Wistar rats. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparative separation and enrichment of four taxoids from Taxus chinensis needles extracts by macroporous resin column chromatography

An environment‐friendly method was established for the preparative separation and enrichment of four taxoids, namely 10‐deacetylbaccatin III (10‐DAB III), 7‐xylosyl‐10‐deacetyltaxol (7‐xyl‐10‐DAT), cephalomannine and paclitaxel from Taxus chinensis needles extracts. Characteristics of seven widely used macroporous resins for four taxoids were compared, AB‐8 resin offered better adsorption and desorption capacities than others. AB‐8 resin column chromatography was used to study the desorption process for four taxoids. The optimum parameters for desorption were 30% ethanol 5 RV for removing impurities, following 15 RV for 10‐DAB III, after the desorption of impurities with 35% ethanol 10 RV, 45% ethanol 30 RV for 7‐xyl‐10‐DAT, then 65% ethanol 10 RV for cephalomannine and paclitaxel, the flow rate was 6 RV/h. After separation on AB‐8 resin column chromatography, the contents of 10‐DAB III, 7‐xyl‐10‐DAT, cephalomannine and paclitaxel in the product reached 4.58, 13.17, 1.36 and 3.08%, respectively, which were 7.63‐, 3.68‐, 6.18‐ and 6.55‐fold to those in T. chinensis needles extracts. The recovery yields were 94.96, 77.32, 88.09 and 95.25%. In general, the AB‐8 resin column chromatography has the advantages of lower cost, high efficiency and simple procedure. Therefore, it may provide scientific references for the preparative separation and enrichment of taxoids from other T. species.     

Separation and purification of two taxanes and one xylosyl‐containing taxane from Taxus wallichiana Zucc.: A comparison between high‐speed countercurrent chromatography and reversed‐phase flash chromatography

10‐Deacetylbaccatin III, an important semisynthetic precursor of paclitaxel and docetaxel, can be extracted from Taxus wallichiana Zucc. A process for the isolation and purification of 10‐deacetylbaccatin III ( 1 ), baccatin III ( 2 ), and 7β‐xylosyl‐10‐deacetyltaxol ( 3 ) from the leaves and branches of Taxus wallichiana Zucc. via macroporous resin column chromatography combined with high‐speed countercurrent chromatography or reversed‐phase flash chromatography was developed in this study. After fractionation by macroporous resin column chromatography, 80% methanol fraction was selected based on high‐performance liquid chromatography and liquid chromatography with mass spectrometry qualitative analysis. A solvent system composed of n‐hexane, ethyl acetate, methanol, and water (1.6:2.5:1.6:2.5, v/v/v/v) was used for the high‐speed countercurrent chromatography separation at a flow rate of 2.5 mL/min. The reversed‐phase flash chromatography separation was performed using methanol/water as the mobile phase at a flow rate of 3 mL/min. The high‐speed countercurrent chromatography separation produced compounds 1 (10.2 mg, 94.4%), 2 (2.1 mg, 98.0%), and 3 (4.6 mg, 98.8%) from 100 mg of sample within 110 min, while the reversed‐phase flash chromatography separation purified compounds 1 (9.8 mg, 95.6%) and 3 (4.9 mg, 97.9%) from 100 mg of sample within 120 min.     

A Large Scale Separation of Taxanes from the Bark Extract of Taxus yunnanesis and 1H‐ and 13C‐NMR Assignments for 7‐epi‐10‐Deacetyltaxol

A large‐scale separation of paclitaxel from semi‐purified bark extract of Taxus yunnanesis was investigated. The chromatographic behavior of paclitaxel and two dose editing analogues, cephalomannine and 7‐epi‐10‐deacetyltaxol were systematically studied on a C₁₈ bonded phase column with different mobile phase in reverse phase mode. According to the notably different selectivity of the methanol and acetonitrile with water in the mobile phase and the most important requirement of capacity in preparative chromatography, the optimum suitably mobile phase used in a large‐scale isolation of paclitaxel and 7‐epi‐10‐deacetyltaxol on a preparative C₁₈ column was given. Cephalomannine was eliminated by ozonolysis and after then separated throughout a normal phase silica column. The whole large‐scale process for high purity paclitaxel from the bark extract of Taxus yunnanesis consisted of a preliminary purification with Biotage FLASH 150i system based on a prepacked normal phase silica cartridge followed by using a C₁₈ Nova‐pak? column in Waters PrepLC? 4000 preparative HPLC system. The structure of 7‐epi‐10‐deacetyltaxol was elucidated by 2D NMR technologies of TOCSY, DQF‐COSY, HMQC and HMBC, etc.     

Optimization of the extraction of paclitaxel from Taxus baccata L. by the use of microwave energy

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for the extraction of paclitaxel (Taxol) from the needles of yew trees Taxus baccata L. grown in Iranian habitats. The samples, immersed in a methanol-water mixture, were irradiated with microwaves in a closed-vessel system. The method was evaluated using a factorial design approach based on parameters such as extraction time, temperature, methanol concentration in water (v/v), and the ratio of grams of sample to 10 mL of solvent. Statistical treatment of the results revealed that the selected parameters were all significant except the extraction time. Optimum conditions would be 1.5 g samples in 10 mL solvent (90% methanol), an extraction temperature of 95 degrees C, and an extraction time of 7 min. The extracts has been analyzed by reverse-phase high-performance liquid chromatography with UV detection (LC/UV) at 227 nm for quantification. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for confirmation. The main advantage of the proposed MAE method versus conventional solvent extraction (CSE) are the considerable reductions in time (7 min versus 16 h) and in solvent consumption (20 mL versus 150 mL). The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps. Both extraction methods show RSDs lower than 10% and lead to comparable recoveries of paclitaxel (87-92%).     

Rapid separation of four main taxoids in Taxus species by a combined LLP-SPE-HPLC (PAD) procedure

A method is described for the simultaneous determination of paclitaxel and three related taxoids, 10-deacetylbaccatin III (10-DAB III), baccatin III, and cephalomannine, in the extracts from the needles of three Chinese yew species, Taxus cuspidata, T. chinensis, and T. media. SPE was applied as the sample preparation technique and RP-HPLC with a photodiode array detector (PAD) was used for the analysis of extract samples. The crude extracts were treated with an improved SPE cartridge packed with a combination of 1-vinyl-pyrrolidin-2-one and divinyl-benzene. The eluent was 75% methanol. The following separation was achieved with a gradient program on an HIQ SIL C18W column in a system of ACN/water within 60 min. The samples were detected by PAD at wavelengths of 232.1 nm for 10-DAB III, 229.8 nm for baccatin III and paclitaxel, and 223.9 nm for cephalomannine. The content of 10-DAB III, baccatin III, cephalomannine, and paclitaxel varied from 0.0277 to 0.0875, 0.0254 to 0.0405, 0.0715 to 0.2486, and 0.0996 to 0.1301 mg/g in fresh needles of the above yew species, respectively. The assay achieved good resolution in the separation between the four compounds, and it can be used for quality control or purity determination for those in bulk and pharmceutical dosage forms.     

Optimization of the fractional precipitation of paclitaxel from a Taxus chinensis cell culture using response surface methodology and its isolation by consecutive high‐speed countercurrent chromatography

A consecutive preparation method for the isolation and purification of paclitaxel from the Taxus Chinensis cell culture was developed in this study. The process involved alkaline Al₂O₃ chromatography, fractional precipitation, and high‐speed countercurrent chromatography. The original cell culture materials were first extracted with methanol using ultrasound‐assisted extraction, and then the extract (the content of paclitaxel is 1.5%) was separated by alkaline Al₂O₃ column chromatography. Subsequently, fractional precipitation was used to obtain paclitaxel. In particular, response surface methodology was used to optimize the factors of fractional precipitation (methanol concentration, material‐to‐solvent ratio, and precipitating time were optimized as 48.14%, 8.85 mg/mL, and 48.71 h, respectively) and the yield of fractional precipitation product was 30.64 ± 0.60 mg (the content of paclitaxel is 89.3%, 27.37 ± 0.54 mg) from a 100 mg fraction by Al₂O₃ column separation (the content of paclitaxel is 32.4%). Then, the product was used for further isolation by high‐speed countercurrent chromatography. About 1.00 g paclitaxel (200 ± 2 mg in each loading) with a purity up to 99.61% was isolated from 1.25 g of fractional precipitation product with a solvent system of n‐hexane/ethyl acetate/methanol/water (1.2:1.8:1.5:1.5, v/v/v/v) in one run of five consecutive sample loadings without exchanging a new solvent system.     

Identification and determination of the saikosaponins in Radix bupleuri by accelerated solvent extraction combined with rapid‐resolution LC‐MS

A method based on accelerated solvent extraction combined with rapid‐resolution LC–MS for efficient extraction, rapid separation, online identification and accurate determination of the saikosaponins (SSs) in Radix bupleuri (RB) was developed. The RB samples were extracted by accelerated solvent extraction using 70% aqueous ethanol v/v as solvent, at a temperature of 120°C and pressure of 100 bar, with 10 min of static extraction time and three extraction cycles. Rapid‐resolution LC separation was performed by using a C₁₈ column at gradient elution of water (containing 0.5% formic acid) and acetonitrile, and the major constituents were well separated within 20 min. A TOF‐MS and an IT‐MS were used for online identification of the major constituents, and 27 SSs were identified or tentatively identified. Five major bioactive SSs (SSa, SSc, SSd, 6″‐O‐acetyl‐SSa and 6″‐O‐acetyl‐SSd) with obvious peak areas and good resolution were chosen as benchmark substances, and a triple quadrupole MS operating in multiple‐reaction monitoring mode was used for their quantitative analysis. A total of 16 RB samples from different regions of China were analyzed. The results indicated that the method was rapid, efficient, accurate and suitable for use in the quality control of RB.     

Accelerated solvent extraction and pH‐zone‐refining counter‐current chromatographic purification of yunaconitine and 8‐deacetylyunaconitine from Aconitum vilmorinianum Kom

This study aimed to seek an efficient method to extract and purify yunaconitine and 8‐deacetylyunaconitine from Aconitum vilmorinianum Kom. by accelerated solvent extraction combined with pH‐zone‐refining counter‐current chromatography. The major extraction parameters for accelerated solvent extraction were optimized by an orthogonal test design L₉ (3)⁴. Then a separation and purification method was established using pH‐zone‐refining counter‐current chromatography with a two‐phase solvent system composed of petroleum ether/ethyl acetate/methanol/water (5:5:2:8, v/v) with 10 mM triethylamine in the upper phase and 10 mM HCl in the lower phase. From 2 g crude extract, 224 mg of 8‐deacetylyunaconitine (I) and 841 mg of yunaconitine (II) were obtained with a purity of over 98.0%. The chemical structures were identified by ESI‐MS and ¹H and ¹³C NMR spectroscopy.     

Simultaneous LC‐MS/MS bioanalysis of etoposide and paclitaxel in mouse tissues and plasma after oral administration of self‐microemulsifying drug‐delivery systems

In this study, a liquid chromatography–tandem mass spectrometry (LC‐MS/MS) method was developed and validated to simultaneously determine the anticancer drugs etoposide and paclitaxel in mouse plasma and tissues including liver, kidney, lung, heart, spleen and brain. The analytes were extracted from the matrices of interest by liquid–liquid extraction using methyl tert‐butyl ether–dichloromethane (1:1, v/v). Chromatographic separation was achieved on an Ultimate XB‐C₁₈ column (100 × 2.1 mm, 3 μm) at 40°C and the total run time was 4 min under a gradient elution. Ionization was conducted using electrospray ionization in the positive mode. Stable isotope etoposide‐d3 and docetaxel were used as the internal standards. The lower limit of quantitation (LLOQ) of etoposide was 1 ng/g tissue for all tissues and 0.5 ng/mL for plasma. The LLOQ of paclitaxel was 0.4 ng/g tissue and 0.2 ng/mL for all tissues and plasma, respectively. The coefficients of correlation for all of the analytes in the tissues and plasma were >0.99. Both intra‐ and inter‐day accuracy and precision were satisfactory. This method was successfully applied to measure plasma and tissue drug concentrations in mice treated with etoposide and paclitaxel‐loaded self‐microemulsifying drug‐delivery systems.     

Simultaneous determination of main taxoids in Taxus needles extracts by solid-phase extraction-high-performance liquid chromatography with pentafluorophenyl column

A simple and accurate RP-HPLC method with pentafluorophenyl (PFP) column was developed for the simultaneous determination of six taxoids, i.e. paclitaxel, 10-deacetylbaccatin III (10-DAB III), 7-xylosyl-10-deacetyltaxol (7-xyl-10-DAT), 10-deacetyltaxol (10-DAT), cephalomannine and 7-epi-10-deacetyltaxol (7-epi-10-DAT), in the extracts from the needles of three Taxus species. The mobile phase consisted of acetonitrile (A) and water (B), and the extracts were separated using gradient elution program: 30% A at the first 7 min, and then ramped to 42% A at 8 min, held until 38 min. The developed method was validated with satisfactory precision (RSD < 2.61%), repeatability (RSD < 2.92%) and recovery (95.19-104.47%). The above taxoids in the extracts of Taxus cuspidata, T. chinensis and T. media were analyzed with the developed RP-HPLC method, and the results showed that the contents of different taxoids in three mentioned species were distinct. Maximal amounts of 10-DAB III, 7-xyl-10-DAT and 7-epi-10-DAT appeared in T. chinensis, while T. media possessed the highest content of 10-DAT, cephalomannine and paclitaxel. The developed method is accurate and efficient. It can be reliably used in the improved determination of taxoids for the quality control of Taxus species.     

Separation and purification of steroidal saponins from Paris polyphylla by microwave‐assisted extraction coupled with countercurrent chromatography using evaporative light scattering detection

A method of microwave‐assisted extraction coupled with countercurrent chromatography using evaporative light scattering detection was successfully developed for the separation and purification of steroidal saponins from Paris polyphylla. The main extraction conditions including microwave power, liquid/solid ratio, irradiation time, and extraction temperature were optimized using an orthogonal array design method. A suitable two‐phase solvent system consisting of n‐heptane/n‐butanol/acetonitrile/water (10:19:6:20, v/v/v/v) was employed in the separation and purification of the extracts of P. polyphylla. A total of 7.1 mg polyphyllin VII, 4.3 mg gracillin, 9.2 mg dioscin, and 10.2 mg polyphyllin I were obtained from 1.5 g P. polyphylla in less than 300 min, the purities of which determined by HPLC were 96.7, 97.3, 98.7, and 98.6%, respectively. The identification and characterization of these compounds were performed by LC–ESI‐MS and ¹H NMR spectroscopy. The results demonstrated that the proposed method is feasible, economical and efficient for the extraction, separation and purification of effective compounds from natural products.     

Separation of six xanthones from Swertia franchetiana by high‐speed countercurrent chromatography

In our present study, two groups of xanthones isomers (1‐hydroxy‐3,5,8‐trimethoxyxanthone and 1‐hydroxy‐3,7,8‐trimethoxyxanthone; 1,8‐dihydroxy‐3,7‐dimethoxyxanthone and 1,8‐dihydroxy‐3,5‐dimethanolxanthone) and other two xanthones (3‐methoxy‐1,5,8‐trihydroxyxanthone and 3,5‐dimethoxy‐1‐hydroxyxanthone) were separated from Swertia franchetiana . First, a solvent system composed of petroleum ether/methanol/water (2:1:0.6, v/v) was developed for the liquid–liquid extraction of these xanthones from the crude extract. Then, an efficient method was established for the one‐step separation of these six xanthones by high‐speed countercurrent chromatography using n‐hexane/ethyl acetate/methanol/ethanol/water (HEMEW; 6:4:4:2:4, v/v) as the solvent system. The results showed that liquid–liquid extraction could be well developed for efficient enrichment of target compounds. Additionally, high‐speed countercurrent chromatography could be a powerful technology for separation xanthones isomers. It was found ethanol could be a good methanol substitute when the HEMEW system could not provide good separation factors.     

Pressurized Liquid Extraction Combined with Dispersive Liquid‐liquid Micro‐extraction as an Efficient Sample Preparation Method for Determination of Volatile Components in Tobacco

The pressurized liquid extraction (PLE) followed by dispersive liquid–liquid micro‐extraction (DLLME) has been developed for extraction of volatile components in tobacco. 35 volatile components were detected by gas chromatography mass spectrometry (GC‐MS). Methanol–methyl tert‐butyl ether (MTBE) (8:2, v/v) was selected as PLE extraction solvent. The optimized DLLME procedure, 3 mL of pure water and 1.0 mL tobacco extract solution, 40 μL of chloroform as extraction solvent, 0.5 mL of acetonitrile as disperser solvent, was validated. Under the optimum conditions, the enrichment factors were in the range of 96‐159. The limits of detection were between 0.14 and 0.33 μg/kg. The repeatability of the proposed method, expressed as relative standard deviation, varied between 4.3 and 7.5% (n = 6). The recoveries of the analytes evaluated by fortification of tobacco samples were in the range of 84.7‐96.4%. Compared with the conventional sample preparation method for determination of volatile components in tobacco, the proposed method was quick and easy to operate, and had high‐enrichment factors and low consumption of organic solvent.     

Extraction and isolation of flavonoid glycosides from Flos Sophorae Immaturus using ultrasonic‐assisted extraction followed by high‐speed countercurrent chromatography

A method of ultrasonic‐assisted extraction followed by high‐speed countercurrent chromatography was established for the extraction and isolation of three flavonoid glycosides, i.e. rutin, narcissin, and nicotiflorin from Flos Sophorae Immaturus. The effects of ultrasonic‐assisted extraction factors for the main flavonoid compound (rutin) from Flos Sophorae Immaturus were optimized using Box–Behnken design combined with response surface methodology. The optimum conditions were determined as ultrasonic power 83% (600 W), solvent‐to‐material ratio 56:1, methanol concentration 82% v/v, and extraction time 60 min. Three bioactive flavonol glucosides, rutin, narcissin, and nicotiflorin were isolated from Flos Sophorae Immaturus using high‐speed countercurrent chromatography. The separation was performed with a two‐phase solvent system containing ethyl acetate/n‐butanol/methanol/water (4:0.9:0.2:5, v/v). Amounts of 87 mg of rutin, 10.8 mg of narcissin, and 1.8 mg of nicotiflorin were isolated from 302 mg of crude extract of Flos Sophorae Immaturus in a one‐step separation within 160 min with purities of 99.3, 98.0, and 95.1%, respectively, as determined by HPLC with diode array detection. Their structures were characterized by UV, MS, and NMR spectroscopy. It was demonstrated that the established method was simple, fast, and convenient, which was feasible to extract and isolate active flavonoid glycosides from Flos Sophorae Immaturus.     

Effective on‐line high‐speed shear dispersing emulsifier technique coupled with high‐performance countercurrent chromatography method for simultaneous extraction and isolation of carotenoids from Lycium barbarum L. fruits

An efficient combination strategy based on high‐speed shear dispersing emulsifier technique and high‐performance countercurrent chromatography was developed for on‐line extraction and isolation of carotenoids from the fruits of Lycium barbarum. In this work, the high‐speed shear dispersing emulsifier technique has been employed to extract crude extracts using the upper phase of high‐performance countercurrent chromatography solvent system composed of n‐hexane?dichloromethane?acetonitrile (10:4:6.5, v/v) as the extraction solvent. At the separation stage, the high‐performance counter‐current chromatography process adopts elution–extrusion mode and the upper phase of the solvent system as stationary phase (reverse‐phase mode). As a result, three compounds including zeaxanthin, zeaxanthin monopalmitate, and zeaxanthin dipalmitate with purities of 89, 90, and 93% were successfully obtained in one extraction‐separation operation within 120 min. The targeted compounds were analyzed and identified by high‐performance liquid chromatography, mass spectrometry, and NMR spectroscopy. The results indicated that the present on‐line combination method could serve as a simple, rapid, and effective way to achieve weak polar and unstable compounds from natural products.     

Ultra‐high‐pressure‐assisted extraction of wedelolactone and isodemethylwedelolactone from Ecliptae Herba and purification by high‐speed counter‐current chromatography

Ultra‐high‐pressure extraction combined with high‐speed counter‐current chromatography was employed to extract and purify wedelolactone and isodemethylwedelolactone from Ecliptae Herba. The operating conditions of ultra‐high‐pressure extraction were optimized using an orthogonal experimental design. The optimal conditions were 80% aqueous methanol solvent, 200 MPa pressure, 3 min extraction time and 1:20 (g/mL) solid–liquid ratio for extraction of wedelolactone and isodemethylwedelolactone. After extraction by ultra‐high pressure, the extraction solution was concentrated and subsequently extracted with ethyl acetate; a total of 2.1 g of crude sample was obtained from 100 g of Ecliptae Herba. A two‐phase solvent system composed of petroleum ether–ethyl acetate–methanol–water (3:7:5:5, v/v) was used for high‐speed counter‐current chromatography separation, by which 23.5 mg wedelolactone, 6.8 mg isodemethylwedelolactone and 5.5 mg luteolin with purities >95% were purified from 300 mg crude sample in a one‐step separation. This research demonstrated that ultra‐high‐pressure extraction combined with high‐speed counter‐current chromatography was an efficient technique for the extraction and purification of coumestans from plant material.     

Monitoring the oleuropein content of olive leaves and fruits using ultrasound‐ and salt‐assisted liquid–liquid extraction optimized by response surface methodology and high‐performance liquid chromatography

A novel and rapid ultrasound‐ and salt‐assisted liquid–liquid extraction coupled with high‐performance liquid chromatography has been optimized by response surface methodology for the determination of oleuropein from olive leaves. Box–Behnken design was used for optimizing the main parameters including ultrasound time (A), pH (B), salt concentration (C), and volume of miscible organic solvent (D). In this technique, a mixture of plant sample and extraction solvent was subjected to ultrasound waves. After ultrasound‐assisted extraction, phase separation was performed by the addition of salt to the liquid phase. The optimal conditions for the highest extraction yield of oleuropein were ultrasound time, 30 min; volume of organic solvent, 2.5 mL; salt concentration, 25% w/v; and sample pH, 4. Experimental data were fitted with a quadratic model. Analysis of variance results show that BC interaction, A², B², C², and D² are significant model terms. Unlike the conventional extraction methods for plant extracts, no evaporation and reconstitution operations were needed in the proposed technique.     

Screening for pharmaceutically important taxoids in Taxus baccata var. Aurea corr. with CC/SPE/HPLC-PDA procedure

Needles of 'the golden yew' Taxus baccata var. Aurea Corr. were extracted with methanol followed by pre-purification of the crude extract and column chromatographic (CC) separation on florisil in gradient mode (an increasing concentration of acetone in dichloromethane). The obtained fractions were concentrated and purified on silanized silica gel SPE cartridges and taxoids eluted with 75% methanol were analysed by HPLC-PDA procedure using Waters Symmetry C(18) column with gradient elution. The applied method enabled not only determination of four taxoids commonly occurring in yew extracts (10-deacetylbaccatin III, baccatin III, paclitaxel and cephalomannine), but also, on the basis of chromatographic behaviour and UV spectrum, 10-deacetylated taxoids (10-deacetylpaclitaxel, 10-deacetylcephalomannine, 7-xyloside-10-deacetylpaclitaxel and 10-deacetyltaxol C) could be detected together with 7-epi-10-deacetylpaclitaxel. From the needles of Taxus baccata var. Aurea Corr. the largest amounts isolated were of 10-deacetylbaccatin III, then 10-deacetylpaclitaxel and 7-xyloside-10-deacetylpaclitaxel, all compounds considered to be paclitaxel precursors in semisynthesis. The efficient mechanism of the separation of 10-acetylated taxoids from their 10-deacetylated derivatives on florisil on the basis of electron acceptor-electron donor interactions is discussed.