Nanocomposite hydrogel consisting of Na‐montmorillonite with enhanced mechanical properties

A new kind of nanocomposite (NC) hydrogel with Na‐montmorillonite (MMT) is presented in this article. The NC hydrogels were synthesized by free radical copolymerization of acrylamide and (3‐acrylamidopropyl) trimethylammonium chloride (ATC) in the presence of MMT and N,N′‐methylene‐bis‐acrylamide used as chemical cross‐linker. Due to the cation‐exchange reaction between MMT and ATC (cationic monomer) during the synthesis of NC hydrogels, MMT platelets were considered chemical “plane” cross‐linkers, different from “point” cross‐linkers. With increasing amount of MMT, the crosslinking degree enhanced, causing a decrease of the swelling degree at equilibrium. Investigations of mechanical properties indicated that NC hydrogels exhibited enhanced strength and toughness, which resulted from chemical interaction between exfoliated MMT platelets and polymer chains in hydrogels. Dynamic shear measurements showed that both storage modulus and loss modulus increased with increasing MMT content. The idea described here provided a new route to prepare hydrogels with high mechanical properties by using alternative natural Na‐MMT. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1020–1026     

High water content clay–nanocomposite hydrogels incorporating guanidinium‐pendant methacrylamide: Tuning of mechanical and swelling properties by supramolecular approach

Novel clay–polymer composite hydrogels with high water content (up to 98 wt %) are developed, in which mechanical properties are reinforced by the formation of multiple ion‐pairs between the polymer chains and clay nanosheets (CNS). When a small amount of guanidinium‐pendant methacrylamide (0.1–0.2 wt %) is copolymerized with a neutral monomer (0.5–2.0 wt %) in an aqueous dispersion of CNS (1.0–3.0 wt %), a self‐standing hydrogel with satisfactory mechanical toughness and elasticity results, despite its high water content (95–98 wt %). The mechanical properties and swelling behaviors of the hydrogels can be tuned by the amount of the guanidinium‐pendant acrylamide. A systematic study indicates that the ion pairs, formed between the guanidinium groups in the polymer chains and the oxyanions on the surfaces of the CNS, serve as crosslinking points in the three‐dimensional network developed in these hydrogels. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 839–847     

pH‐responsive ionic poly(N,N‐diethylaminoethyl methacrylate‐co‐N‐vinyl‐2‐pyrrolidone) hydrogels: Synthesis and swelling properties

A series of an ionic hydrogels composed of N,N‐diethylaminoethyl methacrylamide (DEAEMA), N‐vinyl‐2‐pyrrolidone (VP), and itaconic acid were synthesized by free‐radical cross‐linking copolymerization in water–ethanol mixture by using N,N‐methylenebis(acrylamide) as the cross‐linker, ammonium persulfate as the initiator, and N,N,N′,N′‐tetramethylenediamine as the activator. The swelling behaviors of these hydrogels were analyzed in buffer solutions at various pH. It was observed that the swelling behavior of cross‐linked ionic poly(N,N‐diethylaminoethyl methacrylamide‐co‐N‐vinyl‐2‐pyrrolidone) [P(DEAEMA/VP)] hydrogels at different pH agreed with the modified Flory–Rehner equation based on the affine network model and the ideal Donnan theory. The swelling process in buffer solutions at various pH was found to be Fickian‐type diffusion. The pH‐reversibility and on–off switching properties of the P(DEAEMA/VP) hydrogels may be considered as good candidate to design novel drug‐delivery system. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2819–2828, 2005     

DOSY NMR as a tool for predicting optimal conditions for hydrogel formation: The case of a hyperbranched polyglycidol cross‐linked with boronic acids

This article demonstrates the utility of DOSY NMR for the determination of the optimal conditions for the efficient covalent, reversible cross‐linking of macromolecules in water for hydrogel formation. The studied model system was hyperbranched polyglycidol (HbPGL) containing numerous diol groups in peripheral regions and two types of boronic acids, that is, B(OH)₄^? and benzene‐1,4‐boronic diacid, as cross‐linking agents. Diffusion coefficient changes of a polymer in solution, under the influence of various concentrations of cross‐linking agent and pH, which influences the equilibrium of the reaction between boronic acids and diols, were recorded. These data are consistent with the rheological properties, namely the G′_max(ω) of hydrogels prepared under analogous conditions, from more concentrated solutions of HbPGL. This approach appears to be promising as it facilitates avoiding the loss of a large amount of polymer that is necessary for the elaboration of appropriate conditions for network formation in aqueous media. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2171–2178     

Synthesis and Properties of Hydrogels Based on Chitosan and Poly(Vinyl Alcohol) Crosslinked by Genipin

Semi‐interpenetrating polymeric networks of chitosan and poly(vinyl alcohol) [PVA] were prepared by varying the ratio of the constituents. The hydrogels were crosslinked using genipin, a naturally occurring nontoxic cross‐linking agent. The swelling behavior of these hydrogels was studied by immersing the films in deionized water at various temperatures and in buffer solutions of different pH. The states of water in the hydrogels, swollen at 25°C and pH 7, were determined using Differential Scanning Calorimetry (DSC). The swelling behavior of the gels was found to be dependent on temperature and pH of the medium. The amount of freezing water in the swollen hydrogels increased, whereas the amount of nonfreezing bound water remained more or less the same with increasing PVA concentration.     

Chiral,pH responsive hydrogels constructed by N‐Acryloyl‐alanine and PEGDA/α‐CD inclusion complex: preparation and chiral release ability

Chiral, pH‐responsive hydrogels are constructed by poly(ethylene glycol) diacrylate/α‐cyclodextrin (PEGDA/α‐CD) inclusion complex and L‐N‐acryloyl‐alanine or D‐N‐acryloyl‐alanine (L‐NAA or D‐NAA) by an effective free radical polymerization approach. PEGDA containing two C=C end groups was used simultaneously to introduce α‐CD units in the resulting hydrogels and to serve as a cross‐linking agent, by which forming the designed hydrogels in quantitative yield. Hydrophilic α‐CD moieties acted as pore‐forming agent, while the L(D)‐NAA‐based polymer chains bearing –COOH groups enabled the hydrogels to display remarkable swelling–deswelling behavior in response to pH variation. The chiral NAA monomer‐derived polymer chains rendered the hydrogels with intriguing optical activity, according to circular dichroism spectra. Scanning electron microscopy revealed the uniformly porous microstructures of hydrogels. More remarkably, the L‐NAA‐based hydrogels preferentially adsorbed trans‐4‐hydroxy‐d ‐proline and preferentially released trans‐4‐hydroxy‐l ‐proline, while D‐NAA‐based hydrogels provided opposite results. The hydrogels also demonstrated remarkable enantioselective release ability towards chiral drug ibuprofen. Copyright © 2015 John Wiley & Sons, Ltd.     

Highly Hydrophilic Copolymers of N,N‐Dimethylacrylamide,Acrylamido‐2‐methylpropanesulfonic acid,and Ethylenedimethacrylate: Nanoscale Morphology in the Swollen State and Use as Exotemplates for Synthesis of Nanostructured Ferric Oxide

The polymer framework of water‐swollen copolymers of N,N‐dimethylacrylamide, acrylamido‐2‐methylpropanesulfonic acid, and ethylenedimethacrylate (nominal cross‐linking degrees of 4, 8, and 20 mol %) is composed of highly expanded domains, with “pores” not less than 6 nm in diameter. When the 4 % cross‐linked copolymer (DAE 26‐4) is swollen with a 10^?4 M solution of 4‐hydroxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPOL) in water, MeOH, EtOH, or nBuOH, the molecules of the paramagnetic probe rotate rapidly (τ<1000 ps) and as fast as in the bulk liquid in the case of water. The swelling degree of DAE 26‐4 is related to the Hansen solubility parameters of a number of liquids, including linear alcohols up to n‐octanol. It is also found that the rotational correlation time of TEMPOL in the copolymer swollen by water and the lightest alcohols increases with decreasing specific absorbed volume. Time‐domain NMR spectrometry of water‐swollen DAE 26‐4 shows that sorption of only 14 % of the liquid required for its complete swelling is enough for full hydration of the polymer chains. Accordingly, in fully swollen DAE 26‐4 the longitudinal relaxation time of water closely approaches the value of pure water. {¹³C} CP‐MAS NMR on partially and fully water swollen samples of DAE 26‐4 shows that swelling increases the mobility of the polymer chains, as clearly indicated by the narrowing of the best‐resolved peaks. DAE 26‐4 was used as an exotemplate for the synthesis of nanocomposites composed of the polymer and nanostructured Fe₂O₃ through a series of ion‐exchange/precipitation cycles. After the first cycle the nanoparticles are 3–4 nm in diameter, with practically unchanged size after subsequent cycles (up to five). In fact, the nanoparticle size never exceeded the diameter of the largest available pores. This suggests that the polymer framework controls the growth of the nanoparticles according to the template‐controlled synthesis scheme. Selected‐area electron diffraction, TEM, and high‐resolution electron microscopy show that the nanostructured inorganic phase is composed of hematite.     

Ionic organic/inorganic materials. III. Stimuli responsive hybrid hydrogels based on oligo(N,N‐dimethylaminoethylmethacrylate) and chloroalkyl‐functionalized siloxanes

Ionic organic/siloxane networks containing quaternary ammonium salt (QAS) sequences in the cross‐linking bridges were obtained by the Menshutkin reaction of oligo(N,N‐dimethylaminoethylmethacrylate) (ODMAEM) with a telechelic chloroalkylated siloxane (CAS), such as 1,3‐bis‐(chloromethyl)‐1,1,3,3‐tetramethyldisiloxane, 1,3‐bis‐(chloropropyl)‐1,1,3,3‐tetramethyldisiloxane, and α,ω‐bis(chloromethyl) oligodimethylsiloxane. The resulted structures were investigated by Fourier transform infrared spectroscopy emphasizing the presence of both organic and siloxane moieties. The thermogravimetric analysis under inert atmosphere of the networks, besides the thermal stability, gave also information on the composition of hybrid hydrogels. The morphology of the lyophilized networks was evidenced by environmental scanning electron microscopy, as a function of CAS structure and CAS: ODMAEM feed molar ratio. The swelling response of the ionic networks in water as a function of pH and counterion nature and concentration as well as the water vapors sorption capacity in dynamic regime were evaluated. The properties of the ionic hybrid hydrogels were correlated with the reactants feed molar ratio and concentration of the reaction mixture, CAS type, and the presence of a catalyst. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Physical properties of glycosaminoglycan hydrogels

The chemical composition of glycosaminoglycan (GAG) hydrogels was found to have a profound effect on the physical properties of gels. Hyaluronan (HA) and chondroitin sulfate (CS) were each modified with adipic dihydrazide (ADH) with carbodiimide chemistry. The resulting polymer was crosslinked with various concentrations of poly(ethylene glycol) dialdehyde (PEG‐diald) to produce a series of hydrogels. The physical properties of these GAG hydrogels varied in a concentration‐dependent fashion. Maximal crosslinking was observed at a theoretical crosslinking of 50% for the HA‐ADH‐PEG‐diald hydrogels and 75% for the CS‐ADH‐PEG‐diald hydrogels. Adding PEG‐diald beyond the optimum for crosslinking prolonged the in vitro enzymatic degradation time of the hydrogels. The swelling of the crosslinked GAG hydrogels was correlated with the amount of PEG‐diald used rather than with the crosslinking density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4344–4356, 2004     

Swelling behavior and network structure of hydrogels synthesized using controlled UV‐initiated free radical polymerization

N‐vinyl‐2‐pyrrolidone (VP) and 2‐hydroxyethyl methacrylate (HEMA) copolymeric gels have been synthesized using UV‐initiated photopolymerization to understand their characteristic behavior for development as a bioengineering material, specifically for tissue expansion. The properties of the gels have been investigated by systematic variation of the monomer feed composition and initiator and crosslinker concentrations as well as UV irradiation intensity, which was controlled by various photomasks. The swelling kinetics and network characteristics for the various hydrogels were investigated through the observation of gel swelling behavior in saline solutions and compression modulus determination of the fully swollen hydrogels. The equilibrium swelling ratio (q_e) of the gels increased as expected with increasing VP content and decreasing crosslinker concentration. However, it was found that as the amount of initiator or UV intensity increased, unexpectedly q_e also increased, which indicates a network structure with decreasing effective crosslink density (ν_e) (or increasing average molecular weight between crosslinks (M_c)). Based on this anomalous swelling behavior and thermal analysis of the gels, a molecular structure is proposed consisting of increasing number of dangling chain ends within the polymer network. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1450–1462, 2008     

Preparation of three‐dimensional poly(dimethylsiloxane) (PDMS) with movable cross‐linking

A pentamethylcyclotrisiloxane moiety was introduced into cyclic polystyrene (cPSt) and cyclic PDMS (cPDMS) to obtain noncovalent cross‐linking agents, D₃‐cPSt and D₃‐cPDMS, respectively. Anionic ring‐opening polymerization of octamethylcyclotetrasiloxane (D₄) in nitrobenzene was carried out in the presence of D₃‐cPSt to obtain a cloudy white PDMS gel as a precipitation. On the other hand, bulk copolymerization of D₃‐cPDMS with D₄ proceeded in a homogeneous state to give a colorless transparent PDMS gel in high yield. The formation of mechanically linked PDMS with movable cross‐linking was indicated by control experiment. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5882–5890, 2009     

Organic–inorganic hybrid hydrogels involving poly(N‐isopropylacrylamide) and polyhedral oligomeric silsesquioxane: Preparation and rapid thermoresponsive properties

3‐Acryloxypropylhepta(3,3,3‐trifluoropropyl) polyhedral oligomeric silsesquioxane (POSS) was synthesized and used as a modifier to improve the thermal response rates of poly(N‐isopropylacrylamide) (PNIPAM) hydrogel. The radical copolymerization among N‐isopropylacrylamide (NIPAM), the POSS macromer and N,N′‐methylenebisacrylamide was performed to prepare the POSS‐containing PNIPAM cross‐linked networks. Differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) showed that the POSS‐containing PNIPAM networks displayed the enhanced glass transition temperatures (T_g's) and improved thermal stability when compared with plain PNIPAM network. The POSS‐containing PNIPAM hydrogels exhibited temperature‐responsive behavior as the plain PNIPAM hydrogels. It is noted that with the moderate contents of POSS, the POSS‐containing PNIPAM hydrogels displayed much faster response rates in terms of swelling, deswelling, and re‐swelling experiments than plain PNIPAM hydrogel. The improved thermoresponsive properties of hydrogels have been interpreted on the basis of the formation of the specific microphase‐separated morphology in the hydrogels, that is, the POSS structural units in the hybrid hydrogels were self‐assembled into the highly hydrophobic nanodomains, which behave as the microporogens and promote the contact of PNIPAM chains and water. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 504–516, 2009     

Structure and properties of cellulose/poly(N‐isopropylacrylamide) hydrogels prepared by IPN strategy

Interpenetrating polymer network (IPN) strategy was developed to fabricate novel hydrogels composed of cellulose and poly(N‐isopropylacrylamide) (PNIPAAm) with high mechanical strength and adjustable thermosensitivity. Cellulose hydrogels were prepared by chemically cross‐linking cellulose in NaOH/urea aqueous solution, which were employed as the first network. The second network was subsequently obtained by in situ polymerization/cross‐linking of N‐isopropylacrylamide in the cellulose hydrogels. The results from FTIR and solid ¹³C NMR indicated that the two networks co‐existed in the IPN hydrogels, which exhibited uniform porous structure, as a result of good compatibility. The mechanical and swelling properties of IPN hydrogels were strongly dependent on the weight ratio of two networks. Their temperature‐sensitive behaviors and deswelling kinetics were also discussed. This work created double network hydrogels, which combined the advantages of natural polymer and synthesized PNIPAAm collectively in one system, leading to the controllable temperature response and improvement in the physical properties. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of water‐dispersible,fluorinated particles with grafting sulfonate chains by the core crosslinking of block copolymer micelles

Fluorinated polymer particles with grafting sulfonate chains, which showed high dispersion stability in aqueous media, were synthesized by the crosslinking of block copolymer micelles. A crosslinkable block copolymer, poly[(2,3,4,5,6‐pentafluorostyrene)‐co‐4‐(1‐methylsilacyclobutyl)styrene]‐b‐poly(neopentyl 4‐styrenesulfonate), composed of a statistical copolymer segment of 2,3,4,5,6‐pentafluorostyrene with 4‐(1‐methylsilacyclobutyl)styrene and a neopentyl 4‐styrenesulfonate segment, was prepared by the nitroxy‐mediated living radical polymerization of a 2,3,4,5,6‐pentafluorostyrene/4‐(1‐methylsilacyclobutyl)styrene mixture and neopentyl 4‐styrenesulfonate. The block copolymer formed micelles with a poly[(2,3,4,5,6‐pentafluorostyrene)‐co‐4‐(1‐methylsilacyclobutyl)styrene] core in acetonitrile, which were crosslinked via the ring‐opening reaction of silacyclobutyl groups in the core by a treatment with a platinum catalyst. The deprotection of sulfonate groups in the micelle corona by exposure to trimethylsilyl iodide and a treatment with aqueous HCl, followed by neutralization with aqueous NaOH, provided a polymer particle with polymer chains of sodium 4‐styrenesulfonate grafted on its surface. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1316–1323, 2007     

Synthesis,characterization, and cross‐linking of a library of statistical copolymers based on 2‐“soy alkyl”‐2‐oxazoline and 2‐ethyl‐2‐oxazoline

The synthesis of statistical copolymers consisting of 2‐ethyl‐2‐oxazoline (EtOx) and 2‐“soy alkyl”‐2‐oxazoline (SoyOx) via a microwave‐assisted cationic ring‐opening polymerization procedure is described. The majority of the resulting copolymers revealed polydispersity indices below 1.30. The reactivity ratios (r_EtOx 1.4 ± 0.3; r_SoyOx = 1.7 ± 0.3) revealed a clustered monomer distribution throughout the polymer chains. The thermal and surface properties of the pEtOx‐stat‐SoyOx copolymers were analyzed before and after UV‐curing demonstrating the decreased chain mobility after cross‐linking. In addition, the cross‐linked materials showed shape‐persistent swelling upon absorption of water from the air, whereby as little as 5 mol % SoyOx was found to provide efficient cross‐linking. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5371,–5379, 2007     

Semi‐interpenetrating polymer networks of methyl cellulose and polyacrylamide prepared by frontal polymerization

In this study, the feasibility of frontal polymerization (FP) as an alternative and convenient technique for the preparation of semi‐interpenetrating polymer networks made of methyl cellulose (MC) and cross‐linked polyacrylamide (PAAm) is demonstrated. FP was performed in water and glycerol, as largely available, nontoxic solvents. Although FP occurred in both media, differences were found by comparing the samples made in the two solvents. In particular, those prepared in water are characterized by larger inhomogeneity and less reproducibility, thus accounting for the boiling effects that influence propagating polymerization fronts when water was used. The effects of the ratio among MC and PAAm, the amount of cross‐linker and solvent medium were studied in terms of influence on temperature and velocity of FP fronts, glass transition temperature (dried samples), swelling behavior, dynamic‐mechanical properties (gels swollen in both water or glycerol), and tensile behavior. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1268–1274     

Syntheses and characterization of physically crosslinked hydrogels from dithiocarbamate‐derived polyurethane macroiniferter

A dithiocarbamate (DC)‐based polyurethane macroiniferter (PUMI) was synthesized and used to prepare physically crosslinked polyurethane‐block‐poly (acrylamide) (PU‐b‐PAAm) and polyurethane‐block‐poly(vinyl pyrrolidone) (PU‐b‐PVP) hydrogels. The success of the reactions has been confirmed by FTIR, ¹H‐NMR, and ¹³C‐NMR Spectroscopy analyses. The number average molecular weight of the block copolymers increased linearly with conversion and copolymerization time and thus followed a “living” radical mechanism. The water transport behavior of these polyurethane‐based hydrogels such as water uptake rate, equilibrium water content (EWC), transport number (n), characteristic diffusion rate constant (K), diffusion coefficient (D), and pH effect on EWC has been investigated. The results revealed that PU‐b‐PAAm hydrogels followed Fickian diffusion suggesting diffusion controlled swelling kinetics, whereas the PU‐b‐PVP hydrogels followed non‐Fickian diffusion indicating that both diffusion and structural relaxation controlled the water transport. The PU‐b‐PAAm hydrogels showed higher swelling at both low and high pH than at a neutral pH. This is attributed to protonation of the tertiary amines of N,N′‐diethyl‐N,N′‐bis(2‐hydroxyethyl) thiuram disulfide (DHTD) at low pH and base hydrolysis of amide segments at high pH. In the thermogravimetric analysis; PUMI, PU‐b‐PVP and PU‐b‐PAAm have degraded in three distinct stages related to CS₂ evolution, hard segment degradation, and soft segment degradation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6272–6284, 2008     

Synthesis and properties of crosslinked polyvinylformamide and polyvinylamine hydrogels in conjunction with silica particles

Polyvinylamine hydrogels with silica particles encapsulated (PVAm/silica) were produced by a two‐step synthesis. In the first step, polyvinylformamide/silica (PVFA/silica) hybrids were synthesized from vinylformamide (VFA) and 1,3‐divinylimidazolidin‐2‐one (1,3‐bisvinylethyleneurea, BVU), as the crosslinker, by radical copolymerization in silica/water suspensions using different compositions of VFA/BVU. The target product PVAm/silica was obtained by acidic hydrolysis of the PVFA/silica hydrogels in a second step. The chemical structures of both hydrogels, PVFA/silica and PVAm/silica, respectively, were revealed by solid‐state ¹³C(¹H) cross‐polarity/magic‐angle spinning NMR spectroscopy. Both hydrogels swelled significantly in water. The swelling capacity of the two systems was characterized by the correlation length ξ (or hydrodynamic blob size) of the network meshes with small‐angle neutron scattering experiments. ξ is significantly larger for PVAm/silica than for PVFA/silica, which corresponds to the observed higher swelling capacity of this polyelectrolyte material. Furthermore, the swelling behavior of the hybrid hydrogels was quantitatively described in terms of free swell capacity, centrifuge‐retention capacity, adsorption against pressure, and free swell rate as compared with values of the corresponding copolymer hydrogels. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3144–3152, 2002     

Polyester hydrogels with swelling properties controlled by the polymer architecture,molecular weight,and crosslinking agent

Hydrogels of poly(1,5‐dioxepan‐2‐one) and hydrogels of block copolymers of poly(1,5‐dioxepan‐2‐one) and poly(L ‐lactide) were synthesized. Both star‐shaped polymers and linear polymers were polymerized with ring‐opening polymerization and crosslinked in situ with a tetrafunctional acid chloride (1,2,3,4‐cyclopentane tetracarboxylic acid chloride) or a difunctional acid chloride (succinyl chloride). Different network architectures were synthesized in this way. The initial monomer concentrations and the molecular weights of the macromonomers were also altered. The networks were characterized with ¹H NMR and differential scanning calorimetry, and the swelling abilities of the different hydrogels were investigated in water and dichloromethane. The ratio of the monomer to the crosslinking agent was assessed by the quantification of the signal intensities in the ¹H NMR spectra of the swelled network and agreed with the theoretical crosslinking density. Both the homopolymers of 1,5‐dioxepan‐2‐one and the copolymers of 1,5‐dioxepan‐2‐one and L ‐lactide swelled to a high degree in water. The swelling properties of the materials could be varied over a broad range by changes in the architecture, molecular weight, and content of the precursor in the network. Star‐shaped poly(1,5‐dioxepan‐2‐one) crosslinked with a difunctional acid chloride had the highest degree of swelling among the different homopolymer hydrogels. This network also had the lowest glass‐transition temperature because of the flexible units in the structure. The same trends found for the homopolymer hydrogels were also seen in the hydrogels with block copolymers. The hydrogels swelled enormously in dichloromethane, and as in water, the star‐shaped copolymer crosslinked with a difunctional acid chloride had the highest degree of swelling. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1296–1305, 2003     

Formation of hydrogen bonding in ionized poly(N‐isopropylacrylamide) gels by continuous water exchange

The effects of continuous water exchange on the swelling behavior of poly(N‐isopropylacrylamide‐co‐sodium acrylate) gel were studied. The diameter of gels and the Na⁺ concentration in the solvent were measured at several constant intervals after the solvent (the distilled deionized water) was exchanged. The diameter decreased at room temperature as the solvent was exchanged with water, and it continued to decrease even after more than about 97% of the initial Na⁺ diffused into the water. Thus, the final swelling ratio of the gel was only slightly larger than that of the neutral poly(N‐isopropylacrylamide) gel. To reveal the structural change in molecular level, solid‐state ¹³C cross‐polarization/magic‐angle spinning, solid‐state ¹H combined rotation and multiple‐pulse spectroscopy, and swollen‐state ¹³C dipolar decoupled/magic‐angle spinning NMR experiments were carried out for several dried and swollen samples by varying the times of water exchange. As a result, the intensity and position of the carboxyl peak changed, and the relative intensity of the nonionized carboxyl groups of gels increased with an increasing number of water exchanges. These results indicated that hydrogen bonding was formed between the two, nonionized carboxyl groups (? COOH) and/or between the ? COOH and ? CONH? groups. The macroscopic polymer network shrinkage is discussed in terms of the replacement of counterions Na⁺ by H⁺ and of the formation of intermolecular hydrogen bonding. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1090–1098, 2004