Modification of porous silica particles with poly(acrylic acid)

The surface of porous silica particles was modified with poly(acrylic acid) by reacting the carboxyl groups on poly(acrylic acid) with the amino groups of pregrafted aminopropyltriethoxysilane (APS). The chemical modifications by APS and polymer were characterized by infrared spectroscopy and the amount of APS and poly(acrylic acid) grafted to the surface were determined by thermal gravimetric analyses. The wettability of the modified silica particles, based on the rate of water penetration, was pH‐dependent with PAA; at pH 1.5 the wettability increased but at pH 5.5 it decreased dramatically. The pore size and size distribution of the silica particles decreased with APS and polymer grafting. Copyright © 2000 John Wiley & Sons, Ltd.     

Molecular modeling of polymers. 10. Characterization of conformational transitions of poly(acrylic acid) and poly(methacrylic acid) using dyad structures

The conformational profiles of nearest side-chain neighbors, methylene-dyad structures, of poly(acrylic acid), PAA, and poly(methacrylic acid), PMA, were determined as a function of tacticity, extent of ionization, and presence of counterion. The dominant backbone conformer states are quite similar for both isotactic and syndiotactic diads in a common charge state. Thus, the overall dimensional properties of isotactic syndiotactic and atactic chains of PAA or PMA, based upon dyad interactions, are predicted to be alike for a given charge state. Significant deviations from precise t, g⁺, and g^? states are found for the dyad minimum energy conformations. The rod-to-coil and coil-to-rod transitions observed in PAA and PMA, respectively, as a function of increasing counterion concentration can be explained, to a large extent, by the conformational profiles of the corresponding dyad model structures. © 1994 John Wiley & Sons, Inc.     

Grafting of functionalized silica particles with poly(acrylic acid)

Two different methods to graft silica particles with poly(acrylic acid) (PAA) were studied. In the first method PAA was reacted with 1,1′‐carbonyldiimidazole to give functionalized PAA. The resulting activated carbonyl group reacted easily with 3‐aminopropyl‐functionalized silica at low temperatures. In the second method 3‐glycidoxypropyl‐functionalized silica particles were reacted directly with PAA by using magnesium chloride as a catalyst. Different molecular weights of PAAs were used in order to investigate the effect of molecular weight on grafting yields in both methods. The grafting yields were determined with thermogravimetric analysis (TGA). All products were also investigated with IR. The results showed that the yields of reactions performed at ambient temperature by using 1,1′‐carbonyldiimidazole‐functionalized PAA were the same as with a direct reaction of unfunctionalized PAA and 3‐aminopropyl‐functionalized silica performed at 153°C. Also in reactions between 3‐glycidoxypropyl‐functionalized silica and PAA the yields were satisfactory. Copyright © 2006 John Wiley & Sons, Ltd.     

The synthesis and characterization of monodisperse poly(acrylic acid) and poly(methacrylic acid)

A number of polyacrylic (PAA) and polymethacrylic (PMAA) acids have been synthesized by living anionic polymerization of the monomeric tert-butyl esters followed by subsequent hydrolysis of the corresponding polyesters. The necessary precautions were taken in order to assure good molecular weight control, as well as high yields in the polymerization reactions. The intermediate and final polymers were characterized by gel permeation chromatography and NMR-H¹ spectrometry.     

Efficient synthesis of branched poly(acrylic acid) derivatives via postpolymerization modification

The utility of pentafluorophenyl esters for the selective introduction of functional units and branch points in well-defined poly(acrylic acid) (PAA) derivatives is demonstrated using a combination of controlled radical polymerization and postpolymerization modification. Reversible addition-fragmentation chain transfer enables the synthesis of well-defined copolymers—poly(pentafluorophenyl acrylate-co-tert-butyl acrylate)—with the active ester repeat units serving as attachment points for reaction with primary amines, specifically tris(2-(t-butoxycarbonyl)ethyl)methyl amine (Behera's amine). Deprotection using trifluoroacetic acid removes both the backbone and side chain t-butyl esters to give a series of branched PAA derivatives containing novel tricarboxylic acid side chains that are well suited to complexation and multidentate interactions. Surprisingly, the active ester homopolymer is shown to have the highest reactivity with Behera's amine when compared to copolymers with lower incorporation of pentafluorophenyl esters, suggesting an intriguing interplay of neighboring group effects and steric interactions. The ability to tune the efficiency of postpolymerization modification gives a library of PAA derivatives.     

Synthesis and characterization of novel optically active poly(amide-imide)s and poly(ester-imide)s containing calix[4]arene and amino acid units with binding ability towards alkali metal and toxic heavy metal cations

<正>A novel calix[4]arene derivative 2 with amino functional groups at the lower rim was first prepared via introduction of nitro functional groups and amination of the dinitro derivative of calix[4]arene.The optically active monomers were synthesized by dehydration of L-leucine(and L-isoleucine) and 3,3',4,4'-benzophenonetetracarboxylic- 3,3',4,4'-dianhydride(3) followed by reaction with thionyl chloride to form 5a and 5b.Two methods,polymerization under microwave irradiation and solution polymerization in CH_2Cl_2/TEA,were then employed to carry out the condensation polymerization of 2 with the optically active monomers 5a and 5b,respectively.The polymerization conditions affected the kind of resulting polymers,poly(amide-imide)s(PAIs) 6a and 6b and poly(ester-imide)s(PEIs) 6a' and 6b' were obtained selectively in good yields and moderate inherent viscosities.Sorption-extraction experiments were carried out using cram picrate extraction method and verified good binding ability of the resulting calixarene-based polymers towards silver,alkali metal and toxic heavy metal cations.Also thermogravimetric analysis indicated that the resulting PAIs and PEIs were thermally stable.     

Structure and pH‐sensitive properties of poly (vinylidene fluoride) membrane changed by blending poly (acrylic acid) microgels

pH‐sensitive poly (vinylidene fluoride) (PVDF)/poly (acrylic acid) (PAA) microgels membranes are prepared by phase inversion of the N, N‐dimethylformamide solution containing PAA microgels and PVDF in aqueous solution. The composition and structure of the blend membrane are investigated by Fourier transform infrared spectra, X‐ray photoelectron spectroscopy measurements, thermo gravimetric analysis, field‐emission scanning electron microscope and atomic force microscope. The results indicate the surface and cross section of the blend membranes have a porous structure with PAA microgels immobilized inside the pore and on the membrane surface. The blend PVDF membranes exhibit pH‐sensitive water flux, with the most drastic change in permeability observed between pH 3.7 and 6.3. The blend membranes are fouled by bovine serum albumin, and their antifouling property is enhanced by increasing PAA microgels, mainly derived from the improved hydrophilic property. Copyright © 2013 John Wiley & Sons, Ltd.     

Osmotic deswelling of weakly charged poly(acrylic acid) solutions and gels

The osmotic pressure of weakly charged aqueous poly(acrylic acid) (PAA) solutions and the swelling pressure PAA gels were studied by osmotic deswelling at different degrees of ionization (α). In solution, the osmotic pressure was found to scale linearly with concentration, whereas the scaling power of the swelling pressure of gels was higher (1.66). The effect of the ionization degree on the osmotic coefficient in PAA solutions was in agreement with the theory of Borue and Erukhimovich [Macromolecules, 21 , 3240 (1988)]. Ionization increases the swelling capacity of the PAA gels until a plateau is reached at about 35% neutralization. The concentration at equilibrium swelling scales as C_e ～ α^?0.6. The contribution of the network to the gel swelling pressure is evaluated by subtracting the osmotic pressure of the polymer solution at the same concentration and degree of ionization. In swollen gels the extended network opposes swelling. As the gel is osmotically deswelled, a state of zero network pressure exists at a certain concentration, below which the network elasticity favors swelling. The crossover concentration shifts to lower values as the degrees of ionization increases. © 1995 John Wiley & Sons, Inc.     

Mechanism of carbon nanotube dispersion and precipitation during treatment with poly(acrylic acid)

Carbon nanotubes have been shown to be easily dispersed within an acidic aqueous solution of poly(acrylic acid) but precipitate when the pH is increased. Transmission electron microscopy showed that the nanotubes were more exfoliated under the acidic condition but highly aggregated under the basic condition. Carbon K‐edge NEXAFS spectroscopy showed that the carbon nanotubes did not chemically react with poly(acrylic acid) during the dispersion or precipitation and that the dispersion mainly involved physical adsorption of poly(acrylic acid) onto the nanotubes. Together with the carbon K‐edge NEXAFS spectra, the cobalt L_{3, 2}‐edge NEXAFS spectra suggested that under the basic condition, the cobalt impurity within the nanotubes strongly reacted with poly(acrylic acid) resulting in complex formation. Cobalt reduces the adsorption of poly(acrylic acid) onto the nanotubes, which then reduced the nanotube dispersion and resulted in the precipitation. Copyright © 2008 John Wiley & Sons, Ltd.     

Swelling of hydrophobically modified poly(acrylamide) and poly(acrylamide)-co-(acrylic acid) gels in surfactant solutions

A series of hydrophobically modified polyacrylamide and polyacrylamide-co-poly(acrylic acid) gels with systematically varying hydrophobicity were prepared by free-radical polymerization of acrylamide, n-alkylacrylamides (n = 10, 12, and 14), and acrylic acid. The swelling of these gels was examined in water and in both anionic and cationic surfactant solutions. It was found that the gels which incorporated acrylic acid showed extremely high swelling in water. Maximum swelling was observed in gels which incorporated 10 mol% acrylic acid. The swelling of these gels was much less in solutions of both anionic and cationic surfactants than in water. The gels which did not incorporate acrylic acid demonstrated little swelling in water, but showed increased swelling in both anionic and cationic surfactant solutions with increased hydrophobicity of the gel. Received: 1 February 1999 Accepted in revised form: 5 March 1999     

Complexation of poly(acrylic acid) and poly(ethylene oxide) investigated by enhanced Rayleigh scattering method

The method of enhanced Rayleigh scattering spectroscopy (ERS) was developed to investigate the complexation of poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) in semidilute polymer solutions. Based on the Ornstein‐Zernike equation, the relationship between macromolecular static correlation length and ERS intensity was presented. Moreover, the ERS spectra were calculated by the moving window two‐dimensional (MW2D) correlation spectroscopy to get detailed information of the polymer complexation. The results indicated that the ERS spectroscopy characteristics of the polymer mixtures have similar trend, and the ERS intensity promptly increases as the macromolecular chains contract. The increase of ERS intensity showed that the degree of complexation between PAA and PEO increases when the pH value decreases. The complexation results from the collapse of macromolecular chains, which is induced by the PAA chains contracting and the enhanced association between PAA and PEO chains because of the hydrogen bond formation. In addition, the association resulting from the complexation of PAA and PEO in solution was demonstrated by the MW2D correlation spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1847–1852, 2010     

Novel synthesis of N‐substituted polyacrylamides: Derivatization of poly(acrylic acid) with amines using a triazine‐based condensing reagent

Poly(acrylic acid) (PAA) was derivatized through the reaction of its pendant carboxylic acid (CO₂H) groups with a wide range of amine‐terminated molecules. These molecules contained alkyl, hydroxyl, sulfonic acid, or perfluoroalkyl groups. N‐substitution of PAA was carried out by the simple addition of 4‐(4,6‐dimethoxy‐1,3,5‐triazin‐2‐yl)‐4‐methylmorpholinium chloride (DMTMM), a triazine‐based condensing reagent, to a mixture of PAA and amine‐terminated molecules. From proton nuclear magnetic resonance and infrared spectroscopy, it was confirmed that these functional molecules were introduced into the PAA side chain via amide bonds. By the alteration of the synthetic conditions, functional side‐chain contents of greater than 95% were achieved for aqueous reactions with taurine, ethanol amine, and butyl amine. Side‐chain conversion was limited to ≤80% for reactions with perfluoroalkyl amines in methanol. Thus, DMTMM is an attractive replacement for carbodiimide condensing reagents such as 1,3‐dicyclohexylcarbodiimide and 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 126–136, 2006     

Sorption properties of hydrophobically modified poly(acrylic acids) as natural organic matter model substances to pyrene

Amphiphilic natural organic matter (NOM) in soil, water and sediments plays an important role in the fate of low-soluble hydrophobic organic compounds (HOC) in the environment. Scaling NOM structural factors, which affect the transport and immobilization of HOC, is rather involved due to the complexity of the NOM materials. Sorption properties of hydrophobically modified polyacrylic (HMPA) polymers as NOM model substances for pyrene were investigated and discussed with regard to reported NOM results. Emission fluorescence spectroscopic properties of pyrene and potentiometric titrations were used to characterize the hydrophobic and acidic properties of HMPA samples. Excitation fluorescence spectroscopy allowed a speciation of pyrene molecules. Overall complexation constants β₁ and β₂ of pyrene with hydrophobic moieties (–C₈H₁₇) and (–C₁₆H₃₃) were calculated depending on the pH and electrolyte cation nature at an ionic strength of 10 mM, typical of soil solution conditions. Aggregation of HMPA molecules was detected by photon correlation spectroscopy. Normalized sorption constant K_oc values for pyrene with HMPA samples similar to reported values with NOM support recent observations on the contribution of aliphatic moieties to the binding of polyaromatic hydrocarbons (PAH). The HMPA samples also model the partitioning behavior of hydrophobic micelle-like structures of NOM.     

Swelling kinetics of poly(aspartic acid)/poly(acrylic acid) semi‐interpenetrating polymer network hydrogels in urea solutions

Semi‐interpenetrating network (semi‐IPN) hydrogels, composed of poly(aspartic acid) (PAsp) and poly(acrylic acid) (PAAc) with various ratios of PAsp to AAc, were prepared. In this work, swelling kinetics was investigated through calculating some parameters. The swelling ratios were measured at room temperature, using urea solutions as liquids to be absorbed. Compared to in deionized water, the hydrogels showed larger swelling ratios in urea solutions, which might be attributed to the chemical composition of urea. The equilibrium swelling ratio could achieve 600 g/g, and the equilibrium urea/water contents were more than 0.99. The diffusion exponents were between 0.5 and 0.7, suggesting that the solvent transport into the hydrogel was dominated by both diffusion and relaxation controlled systems. Therefore, the PAsp/PAAc semi‐IPN hydrogels were appropriate to carry substances in a urea/water environment for pharmaceutical, agricultural, environmental, and biomedical applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 666–671, 2010     

Study on Synergistic Effect Between Wormlike Micelles and Hydrophobically Modified Poly(acrylic acid) in Salt Solution

The complex system of hydrophobically modified poly (acrylic acid) (HMPA) and wormlike micelles formed by sodium oleate in the presence of sodium acetate is investigated by apparent viscosity and rheological measurements. Addition of small amount of HMPA markedly enhances the viscosity of wormlike micelles, with further increase of HMPA concentration, a viscosity drop is observed. At high salinity, the complex system still remains strong viscoelastic and eliminates the limitation of susceptibility to salt for HMPA. DPD simulation results are in good agreement with experimental data, which provide theoretical confirmation for a synergistic mechanism between HMPA and wormlike micelles.      

FTIR studies of conformational energies of poly(acrylic acid) in cast films

Fourier transform infrared (FTIR) spectroscopic measurements have been undertaken to estimate the conformational energies of poly(acrylic acid) (PAA) cast films in the temperature range of 40–130°C. The temperature dependence of the IR spectra in the C=O stretching region has been analyzed to yield the side-chain and backbone conformational energies. The estimated energies are close to those previously obtained by polarized Raman spectroscopic measurements for PAA solutions. Combining the FTIR value of conformational energy with the simplified rotational isomeric state (RIS) model proposed in the Raman analysis provides a persistence length in accordance with earlier SAXS experiments. The data also agree with the Gibbs-DiMarzio predictions, further substantiating the validity of the analysis. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys, 35: 507–515, 1997     

Binding of a surfactant counterion to low-charge-density poly(acrylic acid) and poly(methacrylic acid)

The binding of a cationic surfactant, dodecylpyridinium (C12Py) chloride, with a low-charge-density poly (methacrylic acid) (PMA) was investigated in buffer solutions under the condition of constant pH. The binding isotherms with PMA consisted of two and three steps at a pH lower and higher than 3.2, respectively. Bindings in the first step were independent of pH and this step was considered to correspond to the solubilization of the hydrocarbon chains of C12Py into the nonpolar region of the compact form of PMA. This is the indication of the compact form from the binding isotherm. At pH higher than 3.2, the second step was discriminated and it depended on the pH. In the third step, a sharp rise in the degree of binding (β) was observed accompanying the solubilization of the precipitates of the PMA–C12Py complex. The binding with poly(acrylic acid) (PAA) and PMA in conventional unbuffered NaCl solutions was also examined and the pH profile of the solution during the binding process was determined. In the case of unbuffered NaCl solutions, the binding with PAA took place cooperatively at the critical association concentration (cac). The binding isotherm consisted of two steps and the pH decreased with the increase in β. The binding isotherm of PMA, on the other hand, consisted of three steps: the pH decreased slightly in the first step and considerably in the second step with the increase in β but it increased with β in the third step, exhibiting a pH minimum around 3.2. The binding in the first step coincided with that obtained in the buffered solutions. Linear relationships between β and the pH were found for both polymers. In the case of PMA, no cac was observed in both buffered and unbuffered NaCl solutions. Received: 24 January 2001 Accepted: 23 May 2001     

MMTCA recognition by molecular imprinting in interpenetrating polymer network hydrogels based on poly(acrylic acid) and poly(vinyl alcohol)

A novel IPN hydrogel designed to recognize MMTCA is prepared by applying the molecular-imprinting method. The IPN is characterized by FT-IR, DSC, and SEM. Langmuir analysis shows that an equal class of adsorption is formed in the hydrogel. The adsorption equilibrium constant and the maximum adsorption capacity are evaluated, and the effect of the pH on MMTCA adsorption is discussed. The selectivity of the imprinted polymer for MMTCA is studied in aqueous solutions of MMTCA/aspirin/riboflavin. The results suggest that the MMTCA-imprinted polymer shows superior selectivity for MMTCA as compared to riboflavin and aspirin. The reproducibility of the imprinted polymer to MMTCA is also studied.     

Preparation and characterization of poly(acrylic acid)-based nanoparticles

The present investigation describes the synthesis and characterization of nanoparticles based on poly(acrylic acid) (PAA) intramolecularly cross-linked with diamine, 2,2′-(ethylenedioxy)bis(ethylamine), using water-soluble carbodiimide. The aqueous colloid dispersions of nanoparticles were clear or mildly opalescent depending on the ratio of cross-linking, pH of the solution, and the molecular weight of PAA, finding consistent with values of transmittance between 3% and 99%. The structure was determined by nuclear magnetic resonance spectroscopy, and the particle size was identified by dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements. It was found that particle size depends on the pH, and at a given pH, it was caused by the ratio of cross-linking and the molecular weight of PAA. Particle size measured by TEM varied in the range of 20 and 80 nm. In the swollen state, the average size of the particles measured by DLS was in the range of 35–160 nm.     

Liquid-liquid extraction of transition and alkali metal cations by a new calixarene: Diphenylphosphino calix[4]arene methyl ether

The liquid-liquid extraction of various metal ions by a diphenylphosphino calix[4]arene (1) using picrate counter ion has been studied and compared with those ofp-tert-butyl-calix[4]arene methyl ether (2) and triphenylphosphine (3). The calixarene 1 shows strong binding ability to almost all metal cations examined, but calixarene 2 shows little ability to extract any of them. Based on the continuous variation method, calixarene 1 formed 1: 2 complexes with copper(II) ion.