Synthesis of novel fluorinated hyperbranched polyimides with excellent optical properties

Novel anhydride‐terminated fluorinated hyperbranched polyimides (FHBPIs) were successfully prepared by condensation of a triamine monomer, 1,3,5‐tris(2‐trifluoromethyl‐4‐aminopheoxy) benzene (TFAPOB), and various aromatic dianhydride monomers with different linear length. UV–vis spectra indicate high optical transparency of FHBPI films with a UV–vis absorption edge of 350–395 nm. FHBPIs show increased mechanical properties with the linear length of dianhydride monomer. Young's moduli of FHBPI range from 2.37 to 2.56 Gpa, similar to those of their linear analogs. These FHBPI films also present a minimum birefringence value as low as 0.0025 at 650 nm and have low optical absorption in the optical communication wavelengths of 1310 and 1550 nm. Rib‐type optical waveguide device fabricated by FHBPI‐4d demonstrated an obvious near‐field mode pattern of the waveguide. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6269–6279, 2009     

Permeability,permselectivity, and penetrant‐induced plasticization in fluorinated polyimides studied by positron lifetime measurements

The ortho‐positronium (o‐Ps) lifetime τ₃ and its intensity I₃ in various fluorinated polyimides were determined by the positron annihilation technique and were studied with the spin–lattice relaxation time T₁ and the propylene permeability, solubility, diffusivity, and permselectivity for propylene/propane in them. τ₃, I₃, and the distribution of τ₃ changed when the bulky moieties in the polyimides were changed. The polyimides, having both large τ₃ and I₃ values, exhibited a short T₁ and a high permeability with a low permselectivity. The propylene permeability and diffusivity were exponentially correlated with the product of I₃ and the average free‐volume hole size estimated from τ₃. In highly plasticized states induced by the sorption of propylene, the permeability increased with the propylene pressure in excellent agreement with the change in the free‐volume hole properties probed by o‐Ps. The large and broad distribution of the free‐volume holes and increased local chain mobility for the 2,2‐bis(3,4‐decarboxyphenyl) hexafluoropropane dianhydride‐based polyimides are thought to be important physical properties for promoting penetrant‐induced plasticization. These results suggest that o‐Ps is a powerful probe of not only the free‐volume holes but also the corresponding permeation mechanism and penetrant‐induced plasticization phenomenon. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 308–318, 2003     

Synthesis and characterization of highly transparent and hydrophobic fluorinated polyimides derived from perfluorodecylthio substituted diamine monomers

Two new perfluorodecylthio substituted aromatic diamines, namely 2,4‐diamino‐1‐(1H,1H,2H,2H‐perfluorodecathio)benzene (DAPFB) and 2,2'‐Bis((1H,1H,2H,2H‐perfluorodecyl)thio)[1,1'‐biphenyl]4,4'‐diamine (BPFBD) were synthesized and polycondensed with 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (6FDA) to produce two new perfluorinated polyimides (PI2 and PI4). The chemical structures of these polyimides were confirmed by Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. Two other polyimides (PI1 and PI3) were also synthesized from 6FDA and analogous perfluorodecylthio unsubstituted diamines to investigate the incorporation effect of perfluorodecylthio group on various physical and chemical properties of the synthesized PIs. Compared with PI1 and PI3, PI2 and PI4 exhibited improved solubility, optical transparency, and hydrophobicity, lower moisture absorption, dielectric constant, and thermo‐mechanical stabilities owing to the presence of the perfluorodecylthio side group in the polymer chain. Even though thermo‐mechanical properties of PI2 and PI4 ( : 413 and 404 °C, T_g: 220 and 209 °C, tensile strength of 101 and 76 MPa, tensile modulus of 1.7 and 1.5 GPa and elongation at break of 8 and 10%, respectively) were reduced in comparison to PI1 and PI3 but still were good enough for most of the practical applications. Most importantly, the presence of the perfluorodecylthio side group in BPFBD considerably reduced the dielectric constant of PI4 to 2.71 which was quite low as aromatic polyimide. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 479–488     

Synthesis and characterization of organosoluble ditrifluoromethylated aromatic polyimides

Two novel diamine monomers, 1,4‐bis (4‐aminophenoxy)‐2‐[(3′,5′‐ditrifluoromethyl)phenyl]benzene and 1,4‐bis [2′‐cyano‐3′(4″‐amino phenoxy)phenoxy]‐2‐[(3′,5′‐ditrifluoromethyl)phenyl] benzene, were synthesized from (3,5‐ditrifluoromethyl)phenylhydroquinone. A series of ditrifluoromethylated aromatic polyimides derived from the diamines were prepared through a typical two‐step polymerization method. These polyimides had a high thermal stability, and the temperatures at 10% weight loss were above 507 °C in nitrogen. Most of the polymers showed good solubility in anhydrated 1‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, chloroform, and tetrahydrofuran at room temperature. All the polymers formed transparent, strong, and flexible films with tensile strengths of 63.6–95.8 MPa, elongations at break of 5–10%, and Young's moduli of 2.38–2.96 GPa. The dielectric constants estimated from the average refractive indices are 2.69–2.89. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3018–3029, 2005     

Synthesis and properties of novel regioirregular polyimides from easily synthesized asymmetrical dichlorophthalimide monomers

New asymmetrical aromatic dichlorophthalimide monomers containing pendant groups (trifluoromethyl or methyl) were conveniently prepared from inexpensive and commercially available compounds. With these monomers, a new class of soluble polyimides with a regioirregular structure within the polymer backbone was obtained by the Ni(0)‐catalyzed polymerization method. The structures of the polymers were confirmed by various spectroscopic techniques. The polyimides displayed better solubility and higher thermal stability than the corresponding regular polyimides. In addition, fluorinated polyimides in this study had low dielectric constants ranging from 2.52 to 2.78, low moisture absorptions of less than 0.59%, and low thermal expansion coefficients between 10.6 and 19.7 ppm/°C. The oxygen permeability coefficients and permeability selectivity of oxygen to nitrogen of the films were in the ranges of 2.99–4.20 barrer and 5.55–7.50, respectively. We have demonstrated that the synthetic pathway for polyimides provides a successful approach to increasing the solubility and processability of polyimides without sacrificing their thermal stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3550–3561, 2007     

Organosoluble and light‐colored fluorinated polyimides from 4,4′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl and aromatic dianhydrides

A novel fluorinated diamine monomer based on 4,4′‐biphenol was synthesized via a straightforward, high‐yielding two‐step procedure. 4,4′‐Biphenol was reacted with 2‐chloro‐5‐nitrobenzotrifluoride in the presence of potassium carbonate to yield the intermediate dinitro compound, which was subsequently reduced to afford the fluorinated diamine, 4,4′‐bis(4‐amino‐3‐trifluoromethylphenoxy)biphenyl. A series of organosoluble fluorinated polyimides were prepared from the diamine with various aromatic dianhydrides via a conventional two‐step thermal imidization method. All polyimides were soluble in strong dipolar solvents such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylacetamide. The polyimides showed excellent thermal and thermooxidative stability and good mechanical properties. No significant weight loss was observed below a temperature of 520 °C in nitrogen or in air, and the glass‐transition temperatures ranged from 247 to 313 °C. Low dielectric constants (2.57–3.65 at 10 kHz), low moisture absorption (0.1–0.7 wt %), and low color intensity were also observed. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 524–534, 2002; DOI 10.1002/pola.10113     

Synthesis and characterization of novel polyimides with bulky pendant groups

New dianhydrides containing t‐butyl and phenyl pendant groups have been synthesized and used as monomers, together with commercial diamines, to prepare novel polyimides. The influence of the chemical structure of the monomers on their reactivity has been studied by quantum semiempirical methods. The polyimides have been characterized by FTIR and by NMR in the case of soluble polymers. The presence of pendant groups and the method used to imidize polyimide precursors greatly affected polymer properties such as solubility, glass transition temperature, thermal stability, and mechanical properties. As a rule, the novel polyimides showed better solubility in organic solvents than the parent polyimides. Glass transition temperatures in the range 250–270°C and decomposition temperatures over 520°C were observed for the set of current polymers. Tensile strengths up to 135 MPa and mechanical moduli up to 3.0 GPa were measured on films of the current polyimides. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 805–814, 1999     

Synthesis of nonlinear optical polyimides containing azodiamine derivative chromophores and their electrooptic and thermal properties

Some thermally stable second‐order nonlinear optical (NLO) polyimides were synthesized. The polyimides were prepared by the ring‐opening polyaddition of 4,4′‐(hexafluoroisopropylidene) diphthalic anhydride and pyromellitic dianhydride with two aromatic azodiamine derivatives as the NLO chromophores. These chromophores, based on a nitro group connected with azobenzene as the acceptor end of a donor–π‐bridge–acceptor chromophore and a diamine group as the donor end, had specific chemical stability. On the basis of ZERNER'S INDO methods, according to the sum‐over‐states formula, a program for the calculation of nonlinear second‐order optical susceptibilities was devised. The resulting polyimides had high number‐average and weight‐average molecular weights of up to 26,000 and 53,500, respectively, and a large glass‐transition temperature of 248 °C. With an in situ poling and temperature ramping technique, the optimal temperatures (T_opt's) for corona poling were obtained for the largest second‐order NLO response. The electrooptic coefficient (γ₃₃) of a polyimide at a wavelength of 830 nm was up to 21 pm/V after corona poling under its T_opt, and the value remained at elevated temperatures (>90.6% was retained at 240 °C for >120 h). The thermal stability of the NLO polyimides was studied with UV spectrometry after poling of the films. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2478–2486, 2002     

Synthesis and properties of cross‐linkable high molecular weight fluorinated copolyimides

A series of novel high molecular weight fluorinated co‐polyimides (Co‐PIs) containing styryl side chain based on 1,3‐bis(2‐trifluoromethyl‐4‐aminophenoxy)‐5‐(2,3,4,5‐tetrafluorophenoxy)benzene (6FTFPB) were successfully synthesized. The weight‐average molecular weights (M_ws) and polydispersities of the co‐polyimides were in the range 8.93–10.81 × 10⁴ and 1.33–1.82, respectively. The co‐polyimide film showed excellent solubility in organic solvents, high tensile properties (tensile strength exceeded 91 MPa), excellent optical transparency (cutoff wavelength at 332–339 nm and light transparencies above 89% at a wavelength of 550 nm), and high thermal stability (5% thermal weight‐loss temperature up to 510 °C). The casting and spinning films could be cross‐linked by thermal curing. The cured films show better combination property (including excellent resistance to solvents) than that of co‐polyimides. For instance, the glass transition temperature of Co‐PI‐1 (the molar weight ratio of 6FTFPB was 30%) increased from 217 to 271 °C, the tensile strength enhanced from 94 to 96 MPa, the 5% thermal weight‐loss temperature improved from 514 to 525 °C. Moreover, after cured, Co‐PI‐1 film also has a coefficient of thermal expansion (CTE) value of 60.3 ppm °C^?1, low root mean square surface roughness (R_q) at 4.130 nm and low dielectric constant of 2.60. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 349–359     

Robust Atomistic Modeling of Materials,Organometallic, and Biochemical Systems

Modern chemistry seems to be unlimited in molecular size and elemental composition. Metal‐organic frameworks or biological macromolecules involve complex architectures and a large variety of elements. Yet, a general and broadly applicable theoretical method to describe the structures and interactions of molecules beyond the 1000‐atom size regime semi‐quantitatively is not self‐evident. For this purpose, a generic force field named GFN‐FF is presented, which is completely newly developed to enable fast structure optimizations and molecular‐dynamics simulations for basically any chemical structure consisting of elements up to radon. The freely available computer program requires only starting coordinates and elemental composition as input from which, fully automatically, all potential‐energy terms are constructed. GFN‐FF outperforms other force fields in terms of generality and accuracy, approaching the performance of much more elaborate quantum‐mechanical methods in many cases.     

Synthesis and characterization of novel fluorinated aromatic polyimides derived from 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,5‐ditrifluoromethylphenyl)‐2,2,2‐trifluoroethane and various aromatic dianhydrides

A novel fluorinated aromatic diamine, 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,5‐ditrifluoromethylphenyl)‐2,2,2‐trifluoroethane (9FMA), was synthesized by the coupling reaction of 3′,5′‐ditrifluoromethyl‐2,2,2‐trifluoroacetophenone with 2,6‐dimethylaniline under the catalysis of 2,6‐dimethylaniline hydrochloride. A series of fluorinated aromatic polyimides were synthesized from 9FMA and various aromatic dianhydrides, including pyromellitic dianhydride, 3,3′4,4′‐biphenyl tetracarboxylic dianhydride, 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), and 4,4′‐hexafluoroisopropylidene diphthalic anhydride, via a high‐temperature, one‐stage imidization process. The inherent viscosities of the polyimides ranged from 0.37 to 0.74 dL/g. All the polyimides were quickly soluble in many low‐boiling‐point organic solvents such as tetrahydrofuran, chloroform, and acetone as well as some polar organic solvents such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylacetamide, and N,N′‐dimethylformamide. Freestanding fluorinated polyimide films could be prepared and exhibited good thermal stability with glass‐transition temperatures of 298–334 °C and outstanding mechanical properties with tensile strengths of 69–102 MPa and elongations at break of 3.3–9.9%. Moreover, the polyimide films possessed low dielectric constants of 2.70–3.09 and low moisture absorption (<0.58%). The films also exhibited good optical transparency with a cutoff wavelength of 303–351 nm. One polyimide (9FMA/BTDA) also exhibited an intrinsic negative photosensitivity, and a fine pattern could be obtained with a resolution of 5 μm after exposure at the i‐line (365‐nm) wavelength. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2665–2674, 2006     

Robust Atomistic Modeling of Materials,Organometallic, and Biochemical Systems

Modern chemistry seems to be unlimited in molecular size and elemental composition. Metal-organic frameworks or biological macromolecules involve complex architectures and a large variety of elements. Yet, a general and broadly applicable theoretical method to describe the structures and interactions of molecules beyond the 1000-atom size regime semi-quantitatively is not self-evident. For this purpose, a generic force field named GFN-FF is presented, which is completely newly developed to enable fast structure optimizations and molecular-dynamics simulations for basically any chemical structure consisting of elements up to radon. The freely available computer program requires only starting coordinates and elemental composition as input from which, fully automatically, all potential-energy terms are constructed. GFN-FF outperforms other force fields in terms of generality and accuracy, approaching the performance of much more elaborate quantum-mechanical methods in many cases.     

Synthesis and characterization of novel fluorinated polyimides based on 2,7‐bis(4‐amino‐2‐trifluoromethylphenoxy)naphthalene

A new trifluoromethyl‐substituted bis(ether amine) monomer, 2,7‐bis(4‐amino‐2‐trifluoromethylphenoxy)naphthalene, was synthesized. It led to a series of novel fluorinated polyimides by thermal and chemical imidization routes when reacted with various commercially available aromatic tetracarboxylic dianhydrides. Most of the polyimides obtained from both routes were soluble in many organic solvents, such as N,N‐dimethylacetamide. All the polyimides could afford transparent, flexible, and strong films with low moisture absorptions of 0.3–0.6%, low dielectric constants of 2.52–3.27 at 10 kHz, and an ultraviolet–visible absorption cutoff wavelength at 377–436 nm. The glass‐transition temperatures of the polyimides were in the range of 244–297 °C, and the 5% weight‐loss temperatures were higher than 550 °C. For a comparative study, a series of analogous polyimides based on 2,7‐bis(4‐aminophenoxy)naphthalene were also prepared and characterized. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2001–2018, 2003     

Copolyimides containing alicyclic and fluorinated groups: Characterization of the film microstructure

The microstructures of a series of copolyimide films were characterized with different experimental methods such as density measurements, X‐ray diffraction, ultraviolet‐visible spectrophotometry, positron annihilation spectroscopy, and dynamic mechanical analysis. The experimental data were linked to the chemical structures of the polymers and especially the alicyclic and fluorinated monomers. Some analysis responses were directly dependent on the fluorine atoms and, therefore, did not provide clear information about the microstructures. The chain organization in the amorphous films appeared to be significantly dependent on the effect of the casting solvent. The influence of the alicyclic group content was quite significant for a nonsubstituted diamine but was strongly attenuated with a fluorinated diamine. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2998–3010, 2003     

Formation of new banded spherulites in polyimides

The crystalline morphology and structural development of aromatic polyimides during an optimum continuous thermal imidization procedure were examined by means of polarized optical microscopy and X‐ray diffraction. During thermal imidization, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride/1,3‐diaminobenzene polyimide samples formed complicated spherulites, which, in addition to zigzag Maltese crosses, also showed concentric extinction rings, which are characteristic of banded spherulites. The factors affecting the formation of banded spherulites were studied. The initial imidization conditions dramatically affected the formation of the banded spherulite morphology: slow heating (0.5 °C/min) or fast heating (20 °C/min) led to relatively small polyimide spherulites and less identifiable extinction rings. The morphological features were also affected by the molecular weight of the polyimide: higher molecular weight samples showed typical banded spherulites, whereas low‐molecular‐weight samples formed degenerated banded spherulites. In all the spherulites formed in 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride/1,3‐diaminobenzene polyimides, special zigzag Maltese crosses, instead of normal Maltese crosses, were observed. The relationship between the imidization procedure and the spherulite morphology formation was also studied. X‐ray and Fourier transform infrared together revealed that after several minutes of thermal treatment, the crystallization was nearly complete, with a 42.5% degree of crystallinity; meanwhile, only some poly(amic acid) converted to the corresponding polyimide, with a 27% degree of imidization. The crystalline morphology and structure formed in the initial stage of the imidization process were maintained during the following imidization processing at an elevated temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1997–2004, 2005     

Atomistic packing models for experimentally investigated swelling states induced by CO2 in glassy polysulfone and poly(ether sulfone)

Atomistic packing models have been created, which help to better understand the experimentally observed swelling behavior of glassy polysulfone and poly (ether sulfone), under CO₂ gas pressures up to 50 bar at 308 K. The experimental characterization includes the measurement of the time‐dependent volume dilation of the polymer samples after a pressure step and the determination of the corresponding gas concentrations by gravimetric gas‐sorption measurements. The models obtained by force‐field‐based molecular mechanics and molecular dynamics methods allow a detailed atomistic analysis of representative swelling states of polymer/gas systems, with respect to the dilation of the matrix. Also, changes of free volume distribution and backbone mobility are accessible. The behavior of gas molecules in unswollen and swollen polymer matrices is characterized in terms of sorption, diffusion, and plasticization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1874–1897, 2006     

Synthesis and characterization of polyimides based on new fluorinated 3,3′-diaminobiphenyls

Two new fluorinated diamine monomers, 3,3′-diamino-5,5′-bis(trifluoromethyl)biphenyl and 3,3′-diamino-6,6′-bis(trifluoromethoxy)biphenyl, as well as a known nonfluorinated analog, 3,3′-diaminobiphenyl, were synthesized. Reaction of these diamines with rigid, highly rod-like dianhydrides produced poly(amic acid)s and polyimides, which were spin coated and thermally treated to produce polyimide films for evaluation in electronics applications. It was hoped that these polyimide films would exhibit an ideal combination of low thermal expansion, reduced water absorption, and low dielectric constant but with improved elongation due to the “crankshaft” nature of the 3,3′-biphenyl unit. Unlike polyimide films from analogous 4,4′-diaminobiphenyls, however, the 3,3′-diaminobiphenyl-based polyimides did not yield low in-plane thermal expansion coefficient in spin-coated films. In some cases high elongation was achieved, but with high thermal expansion. These new diamines may nevertheless find utility in polyimides and polyaramides for membrane, fiber, and other applications. Additionally, they may be useful in modifying the properties of polymer backbones via copolymerization. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2441–2451, 1997     

Optical and thermal behavior of novel fluorinated polyimides capable of preparing colorless, transparent and flexible films

A new diamine, 1,5-bis(2-amino-4-trifluoromethylphenoxy)naphthalene (DA1524) was synthesized by the nucleophilic substitution reaction of 1,5-dihydroxynaphthalene and 4-chloro-3-nitrobenzotrifluoride in the presence of potassium carbonate in N,N-dimethylformamide, followed by catalytic reduction with hydrazine and Pd/C in ethanol. DA1524 was then utilized to prepare a novel class of CF₃-containing polyimides. Intrinsic viscosities [η] of the polymer solutions at 25 °C were measured by the extrapolation of their viscosity numbers till zero concentration. and values of the resulting polymers were determined using gel-permeation chromatography (GPC). The polymers showed a good film-forming ability, and some characteristics of their thin films including color and flexibility were investigated qualitatively. In addition, the absorption edge values (λ₀) obtained from their UV–vis curves were determined, and all the resulting polyimides films exhibited high optical transparency. Thermal stability of the polymers was investigated using TGA analyses. The T_g values of the polyimides obtained from their DSC plots were quantified. Solubility of the samples in a variety of organic solvents was also tested.