A convenient room temperature polycondensation toward hyperbranched AB2‐type all‐aromatic polyesters with phenol terminal groups

As a convenient alternative to the classical melt polycondensation the one‐pot solution polycondensation of suitable AB₂ monomers under mild conditions has been successfully adapted to hyperbranched all‐aromatic polyester with phenol terminal groups. The polymerization was performed in solution at room temperature directly using commercially available 3,5‐dihydroxybenzoic acid as monomer and 4‐(dimethylamino) pyridinium 4‐tosylate as catalyst to suppress the formation of N‐acylurea. Different carbodiimides as coupling agents were investigated to find the optimal esterification conditions. The polymers have been characterized extensively and were compared with their well‐known analogs synthesized in melt. The characterization was carried out by NMR spectroscopy, size exclusion chromatography, and asymmetric flow‐field flow fractionation as an alternative separation technique for multifunctional polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5158–5168, 2009     

Thermal degradation of aliphatic hyperbranched polyesters and their derivatives

In this study results of thermal degradation of aliphatic hyperbranched polyesters, AHBP, and their derivatives, determined by non-isothermal thermogravimetric analysis in inert atmosphere (N₂) are presented. The thermal stability of linear polyester PHPA (polyhydroxypivalic acid), additionally synthesized from hydroxypivalic acid, was also studied. AHBP samples, from second to tenth pseudo-generation, were synthesized starting from 2,2-bis(hydroxymethyl)propionic acid and di-trimethylolpropane. Modification of some selected AHBP samples was accomplished with the propionyl and benzoyl chloride, as well as with stearic acid. Thermal degradation of AHBP samples starts in the region between 250 °C and 275 °C and it ends around 430 °C. The thermal stability of AHBP samples increases with the number of end groups in the macromolecule, as well as with the modification of end groups with stearic acid and propionyl chloride. An AHBP sample of the fourth pseudo-generation, where all -OH end groups are modified with benzoyl chloride, shows lower thermal stability than the corresponding unmodified sample. The thermal stability of the linear polyester PHPA is lower than the thermal stability of the AHBP samples of the similar molar mass. The activation energies of thermal degradation for all synthesized AHBP samples were also calculated.     

Biodegradable hyperbranched polyesters derived from 1,1,1‐tris(hydroxymethyl)ethane

Low molar mass hyperbranched polyesters were prepared by polycondensation of 1,1,1‐tris(hydroxymethyl)ethane and various dimethyl esters of aliphatic dicarboxylic acids in bulk. The usefulness of nontoxic bismuth salts as transesterification catalysts for these polycondensations was studied. The maximum conversion increased, and the reaction time decreased in the following sequence of increasing reactivity: dimethyl sebacate < adipate < glutarate < succinate. Regardless of the monomer combination, gelation occurred at conversions > 91.5%. The hyperbranched structure was proven by ¹H NMR spectroscopy and the absence of cyclic elements by MALDI‐TOF mass spectrometry. Quantitative acylation of all CH₂OH groups was achieved with an excess of acetic anhydride or methycrylic anhydride. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 231–238, 2009     

Synthesis of photocrosslinkable hyperbranched polyesters and their film properties

Hyperbranched polyesters with terminal methacryloyl groups (HBPEAc) were synthesized by the one‐pot polyaddition of bisphenol A diglycidyl ether and trimesic acid in the presence of methacrylic acid with a number‐average molecular weights of 5100–7700 in 70–83% yields. The photoradical polymerization of HBPEAc was examined in the presence of 2‐methyl‐1‐[4‐(methylthio)phenyl]‐2‐morpholinopropan‐2‐one (Irgacure 907®) as a photoinitiator in the film state upon UV irradiation to afford the corresponding cured films quantitatively. The crosslinking densities of the cured films of HBPEAc were higher than those of the corresponding linear ones, and birefringence cannot be detected for the cured films of HBPEAc because of their random structures. Furthermore, an alkaline‐developable hyperbranched polyester containing pendant carboxyl groups (HBPEAc‐COOH) was prepared by the addition reaction of HBPEAc with cis‐1,2,3,6‐tetrahydrophthalic anhydride, and its patterning properties were examined to give the resolution of a 55‐μm‐line and 275‐μm‐space pattern by UV irradiation with 700 mJ/cm². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4642–4653, 2005     

Photoactive,liquid‐crystalline,hyperbranched benzylidene polyesters: Synthesis and characterization

A novel photoactive, liquid‐crystalline, hyperbranched benzylidene polyester (PAHBP) was synthesized from a dilute solution of an A₂ photoactive monomer [bis(4‐hydroxybenzylidene)‐4‐phenyl cyclohexanone] and a B₃ monomer (1,3,5‐benzene tricarboxylic acid chloride) by the solution polycondensation method in the presence of pyridine as a condensing agent. PAHBP was thoroughly characterized by Fourier transform infrared, ¹H and ¹³C NMR, ultraviolet–visible spectrometry, and gel permeation chromatography. The inherent viscosity of the polymer was 0.35 dL/g in tetrahydrofuran. The degree of branching was 0.53, which confirmed the branched architecture of the polymer. Furthermore, thermogravimetric analysis, differential scanning calorimetry, and polarized optical microscopy were used to examine the thermal stability and thermotropic liquid‐crystalline properties of the hyperbranched polyester. The polymer exhibited a nematic mesophase over a wide range of temperatures. The photoreactivity of PAHBP was studied by photolysis under ultraviolet light. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 53–61, 2006     

Synthesis and characterization of hyperbranched aromatic polyamide copolymers prepared from AB2 and AB monomers

A series of hyperbranched aromatic polyamide copolymers has been prepared and characterized from direct polycondensation of AB₂ and AB monomers. Structure of the monomers and the molar ratio of AB₂/AB showed strong influence on the properties of resulting copolymers. A small amount of AB₂ branching unit improved markedly the solubility of the resulting copolymer. Mark-Houwink parameters of the copolymers were essentially independent of the mole ratio of the monomers. The physical and mechanical properties of resulting copolymers were influenced not only by the mole ratio of monomers, but also by the structure of the monomers employed.     

Synthesis and characterization of novel hyperbranched polybenzimidazoles based on an AB2 monomer containing four amino groups and one carboxylic group

A new kind of AB₂ monomer, 4‐[2,6‐bis(3,4‐diaminophenyl)pyridin‐4‐yl]benzoic acid, was synthesized, and several hyperbranched polybenzimidazoles (HPBIs) were prepared through self‐polymerization followed by modification reactions with end‐capping reagents such as 4‐methyl benzoic acid and 3‐[3,5‐bis(trifluoromethyl)phenoxy] benzoic acid. The HPBIs had good solubility in strongly aprotic solvents, such as N‐methyl‐2‐pyrrolidone, N,N′‐dimethylformamide, N,N′‐dimethylacetamide, and dimethyl sulfoxide. They also exhibited excellent thermal properties, with glass‐transition temperatures of 318–381 °C and 10% weight loss in the range of 338–674 °C in nitrogen and 329–509 °C in air. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5729–5739, 2006     

Synthesis and characterization of degradable hyperbranched poly(2‐ethyl‐2‐oxazoline)

Hyperbranched poly(2‐ethyl‐2‐oxazoline) was synthesized by a combination of cationic ring‐opening polymerization and the oxidation of thiol to disulfide groups. A three‐arm star poly(2‐ethyl‐2‐oxazoline) (PEtOx) was first synthesized using 1,3,5‐tris(bromomethyl) benzene as an initiator. The star PEtOx was end‐capped with potassium ethyl xanthate. Similarly, a linear PEtOx was synthesized and end‐capped with potassium ethyl xanthate using benzyl bromide as an initiator. Hyperbranched PEtOx was then obtained by in situ cleaving and subsequent oxidation of the star PEtOx and linear PEtOx mixture with n‐butylamine as both a cleaving agent and a base in tetrahydrofuran. The linear PEtOx was used to prevent the formation of gel. The hyperbranched PEtOx can be cleaved with dithiothreitol to trithiol and monothiol polymer. The hyperbranched PEtOx shows no remaining thiols using Ellman's assay. The resulting hyperbranched PEtOx was hydrolyzed to a novel hyperbranched polyethyleneimine with degradable disulfide linkages. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2030–2037     

Synthesis of hyperbranched poly(ether nitrile)s by one‐step polycondensation of an AB2 monomer

Hyperbranched poly(ether nitrile)s were prepared from a novel AB₂ type monomer, 2‐chloro‐4‐(3,5‐dihydroxyphenoxy)benzonitrile, via nucleophilic aromatic substitution. Soluble and low‐viscous hyperbranched polymers with molecular weights upto 233,600 (M_w) were isolated. According to the ¹H NMR and GPC data, the unique polymerization behavior was observed, which implies that the weight average molecular weight increased after the number average molecular weight reached plateau region. Model compounds were prepared to characterize the branching structure. Spectroscopic measurements of the model compounds and the resulting polymers, such as ¹H, DEPT ¹³C NMR, and MS, strongly suggest that the ether exchange reaction and cyclization are involved in the propagation reaction. The side reactions would affect the unique polymerization behavior. The resulting polymers showed a good solubility in organic solvents similar to other hyperbranched aromatic polymers. The hydroxy‐terminated polymer was even soluble in basic water. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5835–5844, 2009     

Synthesis and characterization of hyperbranched polyesters and polyurethane coatings

Polyurethane (PU) coatings are widely used for variety of high‐performance applications in today's coating technology. The emerging hyperbranched polymers having three‐dimensional morphology have opened a new avenue to tailor the architecture of PU coatings. The methodology followed here is based on preparation of PU coatings from hyperbranched polyester. Initially, different hyperbranched polyester polyols (HPs) were synthesized by varying the hydroxyl‐terminated precursors that is, pentaerythritol, trimethylol propane or glycerol and keeping the diacid that is, adipic acid quantity constant at various mole ratios of 1:0.6, 1:0.8, 1:0.9, and 1:1, respectively. The obtained HPs were characterized by nuclear magnetic resonance (NMR) spectroscopy, matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF)‐mass spectrometry, and Fourier transform‐infrared (FTIR) spectroscopy. The degree of branching and the quantity of different structural units present in the various HPs were calculated by integrating the quaternary carbon and carbonyl zone in ¹³C NMR spectroscopy. The extent of condensation in different HPs was also calculated from ¹H NMR spectra. Later on, NCO‐terminated PU prepolymers (NCO‐PU) were synthesized by reacting HPs with isophorone diisocyanate (IPDI) at NCO/OH ratio of 1.6:1. In the third step, the excess NCO content in the NCO‐capped PU prepolymers were reacted with atmospheric moisture and hyperbranched polyurethane (HPU) coatings were formed. The coating films were analyzed by FTIR and dynamic mechanical thermal analysis instruments. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2673–2688, 2007     

Synthesis and characterization of a novel AB2 monomer and corresponding hyperbranched poly(arylene ether phosphine oxide)s

A novel AB₂ monomer, 4‐(fluorophenyl)‐4′,4″‐(bishydroxyphenyl) phosphine oxide, was synthesized. The monomer was successfully polymerized to a modest molecular weight with various catalysts, including K₂CO₃ and Cs₂CO₃/Mg(OH)₂. Hyperbranched polymers exhibited exceptionally high thermal stability and solubility in conventional polar organic solvents and basic water solutions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3736–3741, 2000     

Direct synthesis of terminally “clickable” linear and hyperbranched polyesters

1,3‐Dipolar cycloaddition of an organic azide and an acetylenic unit, often referred to as the “click reaction”, has become an important ligation tool both in the context of materials chemistry and biology. Thus, development of simple approaches to directly generate polymers that bear either an azide or an alkyne unit has gained considerable importance. We describe here a straightforward approach to directly prepare linear and hyperbranched polyesters that carry terminal propargyl groups. To achieve the former, we designed an AB‐type monomer that carries a hydroxyl group and a propargyl ester, which upon self‐condensation under standard transesterification conditions yielded a polyester that carries a single propargyl group at one of its chain‐ends. Similarly, an AB₂ type monomer that carries one hydroxyl group and two propargyl ester groups, when polymerized under the same conditions yielded a hyperbranched polymer with numerous “clickable” propargyl groups at its molecular periphery. These propargyl groups can be readily clicked with different organic azides, such as benzyl azide, ω‐azido heptaethyleneglycol monomethylether or 9‐azidomethyl anthracene. When an anthracene chromophore is clicked, the molecular weight of the linear polyester could be readily estimated using both UV–visible and fluorescence spectroscopic measurements. Furthermore, the reactive propargyl end group could also provide an opportunity to prepare block copolymers in the case of linear polyesters and to generate nanodimensional scaffolds to anchor a variety of functional units, in the case of the hyperbranched polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3200–3208, 2010     

One‐pot synthesis and characterization of hyperbranched poly(ester‐amide)s from commercially available dicarboxylic acids and multihydroxyl secondary amines

A convenient and cost‐effective strategy for synthesis of hyperbranched poly(ester‐amide)s from commercially available dicarboxylic acids (A₂) and multihydroxyl secondary amine (CB₂) has been developed. By optimizing the conditions of model reactions, the AB₂‐type intermediates were formed dominantly during the initial reaction stage. Without any purification, the AB₂ intermediate was subjected to thermal polycondensation in the absence of any catalyst to prepare the aliphatic and semiaromatic hyperbranched poly(ester‐amide)s bearing multi‐hydroxyl end‐groups. The FTIR and ¹H NMR spectra indicated that the polymerization proceeded in the proposed way. The DBs of the resulting polymers were confirmed by a combination of inverse‐gated decoupling ¹³C NMR, and DEPT‐135 NMR techniques. The DBs of the hyperbranched poly(ester‐amide)s were in the range of 0.44–0.73, depending on the structure of the monomers used. The hyperbranched polymers exhibited moderate molecular weights with relatively broad distributions determined by SEC. All the polymers displayed low inherent viscosity (0.11–0.25 dL/g) due to the branched nature. Structural and end‐group effects on the thermal properties of the hyperbranched polymers were investigated using DSC. The thermogravimetric analysis revealed that the resulting polymers exhibit reasonable thermal stability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5077–5092, 2008     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Synthesis and characterization of water‐soluble hyperbranched poly(ester amine)s from diacrylates and diamines

Various water‐soluble hyperbranched poly(ester amine)s were synthesized by the direct polyaddition of diamines to diacrylates in the absence of a catalyst. Each diamine contained a secondary amino group and a primary amino group such as 1‐(2‐aminoethyl)piperazine, N‐methyl‐1,3‐propanediamine, or N‐ethylethylenediamine. When the ratio of diacrylate to diamine was 1/1, no gelation was observed throughout the polymerization. When the ratio of diacrylate to diamine was 3/2, no crosslinking occurred in the diluted solution, whereas an insoluble network formed in the concentrated solution. Fourier transform infrared and mass spectrometry were used to investigate the reaction procedure. The secondary amino group of diamine reacted faster with the vinyl group of diacrylate; this resulted in the formation of the intermediate with an acrylate group and two active hydrogen atoms attached to a nitrogen atom. Further self‐polyaddition of the intermediate, a kind of AB₂‐type monomer, gave the hyperbranched poly(ester amine). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2340–2349, 2002     

Cyclizations in hyperbranched aliphatic polyesters and polyamides

Hyperbranched aliphatic polyesters of 2,2′-bis-(hydroxymethyl) propanoic acid and hyperbranched aliphatic polyamides obtained from new carboxy- and amino-functionalized caprolactams were studied by NMR spectroscopy and MALDI-TOF mass spectrometry. Ring-chain equilibria taking place through intramolecular hydroxy-ester, carboxy-amide or amine-amide interchanges and leading to the formation of cyclic branches or end-groups were found to exert a predominant influence on the molar mass of these hyperbranched polymers. A number of intra- or intermolecular side reactions, such as the formation of ethers in polyesters and the formation of anhydrides, imides, amidines and secondary amines in polyamides were also detected and resulted in polymer crosslinking on prolonged heating. The existence of such ring-chain equilibria and side-reactions make the control of hyperbranched polymer structure much more difficult than generally accepted.     

Synthesis and properties of hyperbranched poly(ether sulfone)s prepared by self‐polycondensation of novel AB2 monomer

Hyperbranched poly(ether sulfone)s were prepared by the self‐polycondensation of the novel AB₂ monomer, 4‐(3,5‐hydroxyphenoxy)‐4′‐fluorodiphenylsulfone. The high‐molecular‐weight polymers were isolated in good yields. The degree of branching (DB) of the resulting polymers was investigated by the preparation of dendritic and linear model compounds. The DB determined by gated decoupling ¹³C NMR measurements was in the range 0.17–0.41 and was dependent on the base used for the self‐polycondensation. It was found that cesium fluoride was an effective base to form the polymer having the DB of 0.41. The resulting hyperbranched poly(ether sulfone)s showed good solubility in organic solvents. The solubility and the glass transition temperature of the polymers were influenced by the terminal functional groups. The unique thermal crosslinking phenomenon was observed during the DSC measurements of the hydroxyl‐terminated hyperbranched poly(ether sulfone) under air condition. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,photochemical and phase behavior of linear and hyperbranched photoactive benzylidene liquid‐crystalline polyesters

Photoactive hyperbranched benzylidene liquid‐crystalline polyester (PAHBP) and photoactive linear benzylidene liquid‐crystalline polyester (PALBP) were synthesized by solution polycondensation with pyridine as an acid acceptor. PAHBP and PALBP were thoroughly characterized with Fourier transform infrared, ¹H and ¹³C NMR, ultraviolet–visible spectrophotometry, fluorescent spectrophotometry, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, and polarized optical microscopy. Both polymers exhibited nematic mesophase. The glass‐transition temperature and liquid‐crystalline isotropic temperature of PAHBP were higher than those of PALBP. During photolysis under ultraviolet light, both polymers underwent an intermolecular photocycloaddition reaction, and the photoactivity of PAHBP was faster than that of PALBP; this was further confirmed by photoviscosity studies. PALBP and PAHBP were fluorescent in nature. An increase in the fluorescence intensity with the time of ultraviolet‐light irradiation was observed for both PAHBP and PALBP. The rate of increase in the fluorescence intensity of the linear analogue (PALBP) was higher than that of the hyperbranched polymer (PAHBP). This behavior could be attributed to the attainment of better planarity in the case of the linear one but not in the case of PAHBP because of the rapid crosslinking of PAHBP leading to an irregular architecture. This behavior was further confirmed by the calculation of the steric energy from corresponding model compounds. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3986–3994, 2006     

Hydroxyl‐ and amine‐terminated hyperbranched polyurethanes using AB2‐type azide monomers: Synthesis,characterization, fluorescence,and charge‐transfer complexation studies

Novel AB₂‐type azide monomers such as 3,5‐bis(4‐methylolphenoxy)carbonyl azide (monomer 1) , 3,5‐bis(methylol)phenyl carbonyl azide (monomer 2) , 4‐(methylol phenoxy) isopthaloyl azide (monomer 3) , and 5‐(methylol) isopthaloyl azide (monomer 4) were synthesized. Melt and solution polymerization of these monomers yielded hydroxyl‐ and amine‐terminated hyperbranched polyurethanes with and without flexible ether groups. The structures of theses polymers were established using FT‐IR and NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 3.2 × 10³ to 5.5 × 10⁴ g/mol depending on the experimental conditions used. The thermal properties of the polymers were evaluated using TGA and DSC: the polymer obtained from monomer ( 1 ) exhibited lowest T_g and highest thermal stability and the polymer obtained from monomer ( 2 ) registered the highest T_g and lowest thermal stability. All the polymers displayed fluorescence maxima in the 425–525 nm range with relatively narrow peak widths indicating that they had pure and intense fluorescence. Also, the polymers formed charge transfer (CT) complexes with electron acceptor molecules such as 7,7,8,8‐tetracyano‐quino‐dimethane (TCNQ) and 1,1,2,2‐tetracyanoethane (TCNE) as evidenced by UV‐visible spectra. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3337–3351, 2009