The role of short exchange length in the magnetization processes of L10-ordered FePt perpendicular media

A three-dimensional micromagnetic model with non-uniform grain size distribution has been built up to study the magnetization process in FePt L1₀ perpendicular media. A 3D model of a single FePt magnetic grain is also set up for comparison. The high magneto-crystalline anisotropy K_u results in a short exchange length l_ex in FePt nanograins. Therefore a magnetic grain is divided into smaller grids on the order of l_ex. The simulated perpendicular and longitudinal loops are consistent with experiments, and it is explained why the measured perpendicular H_c is relatively smaller compared with the saturation field of the longitudinal loop in the FePt perpendicular medium.     

Thermal annealing of FePt thin films by millisecond plasma arc pulses

A series of 20 and 100 nm Fe₅₃Pt₄₇ thin films sputter-deposited onto Si substrates have been thermally annealed using a pulsed thermal plasma arc lamp. A series of one, three or five pulses were applied to the thin films with widths of either 50 or 100 ms. The microstructure and magnetic properties of these annealed Fe₅₃Pt₄₇ films are discussed according to the various annealing conditions and A1 to L1₀ phase transformation. Upon pulse annealing, the average in-plane grain size of 15 nm (nearly equivalent for both film thicknesses) was observed to increase to values near 20 nm. In general, increasing the pulse width or number of pulses increased the L1₀ order parameter, tetragonality of the c/a ratio and coercivity of the specimen. The exception to this trend was for five pulses at 100 ms for both film thicknesses, which indicated a reduction of the order parameter and coercivity. This reduction is believed to be a result of the interdiffusion of Fe and Pt into the Si substrate and the formation of iron oxide clusters in the grain boundaries characterized by atom probe tomography.     

Positive exchange bias in a Ni80Fe20/NixFe1−xO thin-film bilayer

We have measured positive exchange bias in a Ni₈₀Fe₂₀/Ni_xFe_1−xO thin-film nanocrystallite system. A series of solid solution Ni_xFe_1−xO 40 nm thick films capped with 25 nm thick Ni₈₀Fe₂₀ were deposited using a range of %O₂/Ar bombardment energies (i.e. End-Hall voltages). Proper tuning of the deposition conditions results in a Ni₈₀Fe₂₀/Ni_xFe_1−xO (30%O₂/Ar) based bilayer that exhibits a positive exchange bias loop shift of H_ex∼60 Oe at 150 K.     

Field dependence of spin and orbital moments of Fe in L10 FePt magnetic thin films

The field dependence of spin and orbital magnetic moments of Fe in L1₀ FePt magnetic thin films was investigated using X-ray magnetic circular dichroism (XMCD). The spin and orbital moments were calculated using the sum rules; it was found that the spin and orbital moment of Fe in L1₀ FePt films are ∼2.5 and 0.2 μ_B, respectively. The relative XMCD asymmetry at Fe L₃ peak on the dependence of applied field suggested that the majority magnetic moment of L1₀ FePt films resulted from Fe.     

Spin dynamics at low microwave frequencies in crystalline Fe ultrathin film double layers using co-planar transmission lines

Magnetic damping has been studied in magnetic double layers using a network analyzer (NA) with a coplanar transmission line. The magnetic films consisted of ultrathin crystalline films of Fe separated by an Au spacer. The films were deposited on GaAs(0 0 1) substrates using the molecular beam epitaxy (MBE) technique. NA-ferromagnetic resonance (NA-FMR) measurements were carried out along the magnetic hard axis, allowing one to follow the frequency FMR linewidth down to the 1 GHz range of frequencies. It will be shown that the FMR linewidth in the NA-FMR measurements is not entirely described by Gilbert damping. The additional contribution in the frequency linewidth increases with decreasing frequency, and is most likely caused by dipolar fields associated with an inhomogeneous RF field around the coplanar transmission line.     

Microstructure and magnetic properties of FePt:Ag nanocomposite films on SiO2/Si(1 0 0)

FePt:Ag nanocomposite films were prepared by pulsed filtered vacuum arc deposition system and subsequent rapid thermal annealing on SiO₂/Si(1 0 0) substrates. The microstructure and magnetic properties were investigated. A strong dependence of coercivity and ordering of the face-central tetragonal structure on both Ag concentration and annealing temperature was observed. With Ag concentration of 22% in atomic ratio, the coercivity got to 6.0 kOe with a grain size of 6.7 nm when annealing temperature was 400 °C.     

Order-disorder transformation in FePt nanoparticles studied by ferromagnetic resonance

We have investigated the ferromagnetic resonance (FMR) response of as-made and temperature annealed FePt magnetic nanoparticles. The as-made nanoparticles, which have been fabricated by a chemical route, crystallize in the low magnetic anisotropy fcc phase and have a diameter in the range of 2-4 nm. The annealing of the particles at high temperatures (T_A=550, 650 and C) in an inert Ar atmosphere produces a partial transformation to the high magnetocrystalline anisotropy L1₀ phase, with a significant increase in particle size and size distribution. FMR measurements at X-band (9.5 GHz) and Q-band (34 GHz) show a single relatively narrow line for the as-synthesized particles and a structure of two superimposed lines for the three annealed samples. The origin of this line shape has been attributed to the presence of the disordered fcc phase. Assuming that the system consists of a collection of identical particles with a random distribution of easy axes, we have been able to estimate a mean value for the magnetic anisotropy constant of the particles in the fcc phase, K∼2×10⁶ erg/cm³. The measured line shape in the annealed samples can be explained if we consider that the magnetic anisotropy of the particles has a gaussian distribution with a relatively broad width.     

Perpendicular magnetic anisotropy of FePt film on Si substrate with SiO2 underlayer and B4C interlayers

FePt multilayer composite films with and without B₄C interlayer have been prepared by magnetron sputtering, respectively, and subsequent annealing in vacuum. It was found that the B₄C layers effectively serve as spacers to separate the FePt layers, enhancing (0 0 1) orientation of FePt alloy. Our results show that highly (0 0 1) oriented FePt/B₄C films have significant potential as perpendicular recording media.     

Antiferromagnet IrMn thickness dependence in exchange-biased perpendicular magnetic anisotropy based on CoFe/Pt/CoFe/[IrMn(tIrMn)] multilayers

The effect of the antiferromagnetic IrMn thickness upon the magnetic properties of CoFe/Pt/CoFe/[IrMn(t_IrMn)] multilayers is studied. An oscillatory interlayer coupling (IEC) has been shown in pinned CoFe/Pt(t_Pt)/CoFe/IrMn multilayers with perpendicular anisotropy. The period of oscillation corresponds to about 2 monolayers of Pt. The oscillatory behavior of IEC depends on the nonmagnetic metallic Pt thickness and is thought to be related to the antiferromagnetic ordering induced by the IrMn layer. From the extraordinary Hall voltage amplitude (EHA) curves as function of IrMn thickness, we report that the oscillation dependence of IEC for the [CoFe/Pt/CoFe] multilayer system induced by IrMn with spacer-layer thickness is a important features of perpendicular exchange biased system.     

Stability Investigation of Colloidal FePt Nanoparticle Systems by Spectrophotometer Analysis

FePt magnetic nanoparticle systems are an excellent candidate for ultrahigh-density magnetic recording. Monodisperse FePt nanoparticles are synthesized by superhydride reduction of FECl2·4H2O and Pt （acac）2 at 263℃ under N2 atmosphere. Transmission electron microscopy （TEM） images show monosize EePt nanoparticles with diameter of 4 nm and a standard deviation of about 10%. The average distance between monodispesre particles is nearly 3 nm, and oleic acid and oleylamine surround the nanoparticles as surfactants. Stability investigation of nanoparticle colloidal solution is done via speetrophotometery analysis. The results for FePt nanoparticles dispersed in hexane indicate that adding surfactants with concentration of 3 × 10^-3 part by volume for centrifugation stage increases the stability of FePt nanoparticles solution with concentration of 16 mg/mL, about 67%.     

Solid state reaction synthesis of NiFe2O4 nanoparticles

Ni-ferrite (NiFe₂O₄) nanoparticles have been synthesized via a solid state reaction process. Ni and Fe bi-metallic nanoparticles in the form of Ni₃₃Fe₆₇ alloy nanopowder are first synthesized by simultaneous evaporation of the required amounts of pure Ni and Fe metals followed by rapid condensation of the evaporated metal flux into solid state by means of an inert gas, helium, using the process of inert gas condensation (IGC). In order to form the NiFe₂O₄ structure, as-synthesized samples (Ni₃₃Fe₆₇) are annealed for 12 h in ambient conditions at different annealing temperatures. Structural analyses show that NiFe₂O₄ starts to form at around 450 °C and gets progressively well defined with increasing annealing temperatures yielding particle with size ranging between 15 and 50 nm. Besides successfully forming NiFe₂O₄, NiO/Fe₃O₄ core/shell nanoparticles have also been synthesized by adjusting the annealing conditions. Three different structures, Ni₃₃Fe₆₇, NiO/Fe₃O₄, and NiFe₂O₄, obtained in this study are compared with respect to their structural and magnetic properties.     

Characterization of Cu additive FePt-C granular films

FePt-C granular films doped with different Cu atomic fractions (x_Cu) were fabricated using facing-target sputtering at room temperature and subsequently annealed at 650 °C. Structural analyses reveal that the as-deposited films are in amorphous state. Appropriate Cu addition (x_Cu = 14) can improve the ordering of L1₀ FePt phase, and excessive Cu doping destroys the formation of ordered L1₀ phase with the appearance of Fe₃C and CuPt phases. Besides, preferential graphitization of amorphous carbon (a-C) occurs near large metal particles upon annealing. Annealing turns the as-deposited superparamagnetic films into ferromagnetic associated with coercivity peaks at x_Cu = 14, drops from ∼11.2 kOe at 5 K to ∼7.2 kOe at 300 K in a 50 kOe field.     

Anomalous magnetization processes and non-symmetrical domain wall displacements in L10 FePt particulate films

Anomalous magnetization processes and non-symmetrical domain wall displacements in the minor loop of L1₀ FePt particulate films were investigated by magnetization measurements and in situ magnetic force microscopy. Magnetization (M) decreases dramatically on increasing the magnetic field to ∼3 kOe after which M becomes small and constant in the range of 5–20 kOe as observed in the successive measurement of minor loops. The domain wall displacement is non-symmetrical with respect to the field direction. The anomalous magnetization behavior was attributed to the non-symmetrical domain wall displacement and large magnetic field required for domain wall nucleation. Energy calculations from modeling suggest that non-symmetrical domain wall displacement is caused by the existence of metastable domains in which the domain edges are stuck to the particle boundaries.     

Memory and aging effects in interacting sub-10 nm nanomagnets with large uniaxial anisotropy

Using a nonequilibrium Monte Carlo method suitable to nanomagnetism, we investigate representative systems of interacting sub-10 nm grained nanomagnets with large uniaxial anisotropy. Various magnetization memory and aging effects are found in such systems. We explain these dynamical effects using the distributed relaxation times of the interacting nanomagnets due to their large anisotropy energies.     

Large vertical loop shifts in mechanically synthesized (Mn,Fe)2O3−t nanograins

Magnetic properties of zero field cooled (ZFC) and field cooled (FC) sample of (Mn,Fe)₂O_3−t nanograins have been investigated by magnetometry (up to 70 kOe) and Mössbauer spectroscopy (up to 60 kOe) in the temperature interval 4.2–300 K. Large horizontal (up to 0.8 kOe) and vertical (up to 80%) shifts of the magnetization hysteresis loops are observed in the FC regime. The obtained results are discussed in terms of exchange interaction between an antiferromagnetic core and a spin-glass-like state of the nanograins boundaries. It is shown that hysteresis loop shifts (horizontal and vertical) depend on the field cooling magnitude, an effect that can be understood by the change of the boundary magnetic structure induced by the external magnetic field. The vertical magnetization shift is described by a phenomenological model, which takes into account the magnetic interaction between the spin-glass like boundary spins and the applied field.     

Monolayer deposition of L10 FePt nanoparticles via electrospray route

The deposition monolayers of L1₀ FePt nanoparticles via an electrospraying method and the magnetic properties of the deposited film were studied. FePt nanoparticles in a size of around 2.5 nm in diameter, prepared by a liquid process, were used as a precursor. The size of the deposited particles can be controlled up to 35 nm by controlling the sprayed droplet size that is formed by adjusting the precursor concentration and the precursor flow rate. The droplets were heated in a tubular furnace at a temperature of up to 900 °C to remove all organic compounds and to transform the FePt particles from disordered face centered cubic to an ordered FCT phase. Finally, the particles were deposited in the form of a monolayer film on a silicon substrate by electrostatic force and characterized by scanning electron microscopy. The monolayer of particles was obtained by the high charge on particles obtained during the electrospraying process. The magnetic properties of the monolayer were investigated by magneto-optic Kerr effect measurements. Coercivity up to 650 Oe for a film consisting of 35 nm L1₀ FePt nanoparticles was observed after heat treatment at a temperature of 800 °C.     

Magnetic properties and microstructure study of high coercivity Au/FePt/Au trilayer thin films

High-coercivity Au(60 nm)/FePt(δ nm)/Au(60 nm) trilayer samples were prepared by sputtering at room temperature, followed by post annealing at different temperatures. For the sample with δ=60 nm, L1₀ ordering transformation occurs at 500 °C. Coercivity (H_c) is increased with the annealing temperature in the studied range 400–800 °C. The H_c value of the trilayer films is also varied with thickness of FePt intermediate layer (δ), from 27 kOe for δ=60 nm to a maximum value of 33.5 kOe for δ=20 nm. X-ray diffraction data indicate that the diffusion of Au atoms into the FePt L1₀ lattice is negligible even after a high-temperature (800 °C) annealing process. Furthermore, ordering parameter is almost unchanged as δ is reduced from 60 to 15 nm. Transmission electron microscope (TEM) photos indicate that small FePt Ll₀ particles are dispersed amid the large-grained Au. We believe that the high coercivity of the trilayer sample is attributed to the small and uniform grain sizes of the highly ordered FePt particles which have perfect phase separation with Au matrix.     

Advanced granular-type perpendicular recording media

We introduce our recent experimental results for three blocked layers for currently used perpendicular recording media; a recording layer (RL: for recording), a soft magnetic underlayer (SUL: magnetic flux path in writing), and a nonmagnetic intermediate layer (NMIL: underlayer of RL and separation layer between RL and SUL). For the NMIL, uniaxial crystallographic symmetry is an essential requirement for suppression of variant growth of magnetic grains in granular-type RL. From this view point, AlN with wurtzite structure and materials with pseudo-hcp structure, which means fcc structure with stacking faults, were found to be effective. For the SUL, disordered hcp CoIr with negative K_u were found to well suppress both spike noise and track erasure due to a wide distribution of magnetic flux under the return yoke in writing and formation of a Neel wall instead of a Bloch wall in the SUL. For the RL, positive-/negative-K_u stacked media with incoherent switching mode was found to be effective in order to solve the recent write-ability problem for high K_u RL material with high thermal stability. Applying all these items, an advanced medium concept with the stacking structure of “CoPtCr-oxide/CoIr-oxide/CoIr/pseudo-hcp nonmagnetic layer/substrate” is very promising from the view point of (1) switching field reduction of a RL with high K_u material, (2) conventional amorphous SUL free, and (3) conventional NMIL free.     

Mössbauer studies on the superparamagnetic behavior of CoFe2O4 with a few nanometers

CoFe₂O₄ nanoparticles with a cubic spinel structure are prepared by a high-temperature thermal decomposition method. The average particle sizes are 4.6  and 5.7 nm for CoFe₂O₄ made with two kinds of solvents by TEM. Mössbauer spectra of 4.6 nm particles displayed a superparamagnetic behavior as demonstrated by a single line with zero hyperfine fields, but that of 5.7 nm particles did not at room temperature. It is considered that anisotropy energy was still more superior to thermal energy because of particle size of 5.7 nm CoFe₂O₄. Furthermore, Mössbauer spectra exhibited the typical spectrum shapes of the CoFe₂O₄ at 4.2 K. The spectrum at 4.2 K was fitted using two magnetic components of hyperfine fields _Hhf=540.4,512.6$H_{\mathrm{hf}}=540.4,512.6$ kOe and isomer shifts δ=0.40,0.30$\delta =0.40,0.30$ mm/s for 4.6 nm and _Hhf=542.7,512.8$H_{\mathrm{hf}}=542.7,512.8$ kOe and δ=0.41,0.29$\delta =0.41,0.29$ mm/s for 5.7 nm corresponding to Fe³⁺ ions at site A and site B, respectively.