Detitanation of MgCl2‐supported Ziegler‐Natta catalysts for the study of active sites organization

Thermal treatments under vacuum of conventional supported Ziegler‐Natta precatalysts (MgCl₂/TiCl₄/Dibutylphthalate) were conducted to gradually remove titanium to modify the active sites distribution. Only limited detitanations of precatalysts were achieved paying attention not to chemically alter the internal donor (T < 150 °C). Used in combination with the required cocatalyst and external donor in the propylene slurry polymerization, the modified precatalysts exhibited a drop of activity versus decreasing titanium content but the distributed polymer properties are almost not affected (a slight narrowing of molecular weight distribution was observed). After a titanium chloride secondary impregnation (possibly done in presence of an additional Lewis base), activity resumed but polymer properties are once again unchanged. These findings highlight the difficulty to separate the different families of active sites and lead us to propose a cluster organization of titanium active sites. Active sites are composed of titanium clusters having a size distribution at the precatalyst surface, possessing a critical operating size and operating collectively in polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5461–5470, 2008     

Modifications of the active sites distribution in the Ziegler‐Natta polymerization of propylene using Lewis acids

Heterogeneous Ziegler‐Natta precatalysts (with phthalate as internal donor) were modified by treatments with various Lewis acids (MCl_n with M = Ga, Sn, Si, and Sb and n = 3, 4, or 5) before their use in the polymerization of propylene. If performed on previously “detitanated” precatalysts, treatments with SnCl₄ and SiCl₄ lead to a slight activation but especially to an increase of the tacticity whereas GaCl₃ and SbCl₅ treatments deactivate the catalyst. The modification method applied to conventional unmodified precatalysts gave similar trends. A significant increase of tacticity (and/or of T_m) and a narrowing of the molecular weight distribution were observed in the case of SnCl₄ and SiCl₄ treatments. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2631–2635, 2010     

Macrocyclization of polymers via ring‐closing metathesis and azide/alkyne‐“click”‐reactions: An approach to cyclic polyisobutylenes

The end‐to‐end cyclization of telechelic polyisobutylenes (PIB's) toward cyclic polyisobutylenes is reported, using either ring‐closing metathesis (RCM) or the azide/alkyne‐“click”‐reaction. The first approach uses bisallyl‐telchelic PIB's (M_n = 1650, 3680, 9770 g mol^?1) and Grubbs 1st‐, 2nd‐, and 3rd‐generation catalyst leading to cyclic PIB's in 60–80% yield, with narrow polydispersities (M_w/M_n = 1.25). Azide/alkyne‐“click”‐reactions of bisalkyne‐telechelic PIB's (M_n = 3840 and 9820 g mol^?1) with excess of 1,11‐diazido‐undecane leads to the formation of mixtures of linear/cyclic PIB's under formation of oligomeric cycles. Subsequent reaction of the residual azide‐moieties in the linear PIB's with excess of alkyne‐telechelic PEO enables the chromatographic removal of the resulting linear PEO‐PIB‐block copolymers by column chromatography. Thus pure cyclic PIB's can be obtained using this double‐“click”‐method, devoid of linear contaminants. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 671–680, 2010     

Copolymerization behavior of titanium imidazolin‐2‐iminato complexes

Monocyclopentadienyl titanium imidazolin‐2‐iminato complexes [Cp′Ti(L)X₂] 1a (Cp′ = cyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), 1b (X = CH₃); 2 (Cp′ = cyclopentadienyl, L = 1,3‐diisopropylimidazolin‐2‐imide, X = Cl); 3 (Cp′ = tert‐butylcyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), upon activation with methylaluminoxane (MAO) were active for the polymerization of ethylene and propylene and the copolymerization of ethylene and 1‐hexene. Catalysts derived from imidazolin‐2‐iminato tropidinyl titanium complex 4 = [(Trop)Ti(L)Cl₂] (Trop = tropidinyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide) were much less active. Narrow polydispersities were observed for ethylene and propylene polymerization, but the copolymerization of ethylene/hexene led to bimodal molecular weight distributions. The productivity of catalysts derived from the dialkyl complex 1b activated with [Ph₃C][B(C₆F₅)₄] or B(C₆F₅)₃ were less active for ethylene/hexene copolymerization but yielded ethylene/hexene copolymers of narrower molecular weight distributions than those derived from 1a/MAO. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6064–6070, 2008     

Ethylenebis(5‐chlorosalicylideneiminato)vanadium dichloride immobilized on MgCl2‐based supports as a highly effective precursor for ethylene polymerization

Ethylenebis(5‐chlorosalicylideneiminato)vanadium dichloride supported on MgCl₂(THF)₂ or on the same carrier modified by Et_nAlCl_3?n, where n = 1–3, was used in ethylene polymerization in the presence of MAO or a common alkylaluminium compounds as a cocatalyst. The support type alter vanadium loading and also change the characteristic of the catalytic active sites. Et₂AlCl is the best activator for a catalyst which has been immobilized on a nonmodified support, whereas the systems which contain a carrier which has been modified by an organoaluminium compound reveal the highest activity in conjunction with MAO. That difference, together with different temperature effects on polymerization efficiency (i.e., decrease and increase of catalytic activity for increasing temperatures, respectively) suggest the formation of different types of active sites in the catalytic systems supported on modified and nonmodified magnesium carrier. However, all supported precatalysts possess a long lifetime, still being active towards ethylene polymerization after 2 h. All the systems yield wide MWD polyethylene, while bimodal MWD is found for some part of analyzed samples. Polyethylene with bimodal particle size distribution is formed with the system which contain modified carriers at higher temperatures. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3480–3489, 2009     

Functional syndiotactic poly(β‐hydroxyalkanoate)s via stereoselective ring‐opening copolymerization of rac‐β‐butyrolactone and rac‐allyl‐β‐butyrolactone

The copolymerization of racemic β‐butyrolactone (rac‐BL^Me) with racemic “allyl‐β‐butyrolactone” (rac‐BL^allyl) in toluene, catalyzed by the discrete amino‐alkoxy‐bis(phenolate) yttrium‐amido complex 1 , gave new poly(β‐hydroxyalkanoate)s with unsaturated side chains. The poly(BL^Me‐co‐BL^allyl) copolymers produced have a highly syndiotactic backbone structure (P_r = 0.80–0.84) with a random enchainment of monomer units, as evidenced by ¹³C NMR, and high molecular weight (M_n up to 58,000 g mol^?1) with a narrow polydispersity (M_w/M_n = 1.07–1.37), as determined by GPC. The comonomer incorporation (5–50 mol % rac‐BL^allyl) was a linear function of the feed ratio. The pendant vinyl bond of the side‐chains in those poly(BL^Me‐co‐BL^allyl) copolymers allowed the effective introduction of hydroxy or epoxy groups via dihydroxylation, hydroboration‐oxidation or epoxidation reactions. NMR studies indicated that all of these transformations proceed in an essentially quantitative conversion and do not affect the macromolecular architecture. Some thermal properties (T_m, ΔH_m, T_g) of the prepared polymers have been also evaluated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3177–3189, 2009     

Synthesis of dendritic macromolecules through divergent iterative thio‐bromo “Click” chemistry and SET‐LRP

The development of a novel nucleophilic thio‐bromo “Click” reaction, specifically base‐mediated thioetherification of thioglycerol with α‐bromoesters was reported in an earlier article. The combination of this thio‐bromo click reaction with subsequent acylation with 2‐bromopropionyl bromide provides an iterative two‐step divergent growth approach to the synthesis of a new class of poly(thioglycerol‐2‐ propionate) (PTP) dendrimers. In this article, the addition of a third step, the single‐electron transfer living radical polymerization (SET‐LRP) of methyl acrylate (MA), was shown to provides access to a three‐step “branch” and “grow” divergent approach to dendritic macromolecules wherein poly(methyl acrylate) (PMA) connects the branching subunits. This facile methodology can provide a diversity of dendritic macromolecular topologies and will ultimately provide the means to the development of self‐organizable dendritic macromolecules. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3940–3948, 2009     

Glass‐transition temperature: Conversion relationship in the polycyclotrimerization of 4,4′‐thiodiphenylcyanate

Polycyclotrimerization of 4,4′‐thiodiphenylcyanate was adopted as a model system for general thermosetting polymers for studying the relationship between the glass‐transition temperature (T_g) and conversion (α) during network formation. Existing expressions for T_g‐α relationship were used and compared. The experimental T_g‐α data were well fitted to several one‐parameter equations although the physical significance of parametric values thus obtained could not be unambiguously identified. Among the two‐parameter models, both the Hale–Macosko–Bair equation and the so‐called “original” DiBenedetto equation were well fitted by experimental data (when the mean‐field crosslink density was used), yielding parametric values consistent with the original designated physical meanings within the corresponding theoretical frames. Relationships between the parameters in different theories were also discussed. Incidentally, a discontinuity of ΔC_pT_g at the gel point was observed (i.e., ΔC_pT_g is of different values in the pregel and postgel regimes, respectively). © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 726–738, 2000     

Synthesis of novel asymmetric dendritic‐linear‐dendritic block copolymers via “living” anionic polymerization of ethylene oxide initiated by dendritic macroinitiators

The first synthesis of asymmetric dendritic‐linear‐dendritic ABC block copolymers, that contain a linear B block and dissimilar A and C dendritic fragments is reported. Third generation poly(benzyl ether) monodendrons having benzyl alcohol moiety at their “focal” point were activated by quantitative titration with organometallic anions and the resulting alkoxides were used as initiators in the “living” ring‐opening polymerization of ethylene oxide. The reaction proceeded in controlled fashion at 40–50 °C affording linear‐dendritic AB block copolymers with predictable molecular weights (M_w = 6000–13,000) and narrow molecular weight distributions (M_w/M_n = 1.02–1.04). The propagation process was monitored by size‐exclusion chromatography with multiple detection. The resulting “living” copolymers were terminated by reaction either with HCl/tetrahydrofuran or with a reactive monodendron that differed from the initiating dendron not only in size, but also in chemical composition. The asymmetric triblock copolymers follow a peculiar structure‐induced self‐assembly pattern in block‐selective solvents as evidenced by size‐exclusion chromatography in combination with multi‐angle light scattering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5136–5148, 2007     

Prepolymerization and postpolymerization functionalization approaches to fluorescent conjugated carbazole‐based glycopolymers via “click chemistry”

Facile prepolymerization and postpolymerization functionalization approaches to prepare well‐defined fluorescent conjugated glycopolymers through Cu(I)‐catalyzed azide/alkyne “Click” ligation were explored. Two well‐defined carbazole‐based fluorescent conjugated glycopolymers were readily synthesized based on these strategies and characterized by ¹H NMR, ¹³C NMR, IR spectra, and UV‐vis spectra. The “Click” ligation offers a very effective conjugation method to covalently attach carbohydrate residues to fluorescent conjugated polymers. In addition, the studies of carbohydrate–lectin interactions were performed by titration of concanavalin A (Con A) to D ‐glucose‐bearing poly(anthracene‐alt‐carbazole) copolymer P‐2 resulting in significant fluorescence quenching of the polymer due to carbohydrate–lectin interactions. When peanut agglutinin (PNA) was added, no distinct change in the fluorescent properties of P‐2 was observed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2948–2957, 2009     

Iron(III)‐mediated AGET ATRP of styrene using tris(3,6‐dioxaheptyl)amine as a ligand

A commercially available tris(3,6‐dioxaheptyl)amine (TDA‐1) was used as a novel ligand for activator generated by electron transfer atom transfer radical polymerization (AGET ATRP) of styrene in bulk or solution mediated by iron(III) catalyst in the presence of a limited amount of air. FeCl₃ · 6H₂O and (1‐bromoethyl)benzene (PEBr) were used as the catalyst and initiator, respectively; and environmentally benign ascorbic acid (VC) was used as the reducing agent. The polymerizations show the features of “living”/controlled free‐radical polymerizations and well‐defined polystyrenes with molecular weight M_n = 2400–36,500 g/mol and narrow polydispersity (M_w/M_n = 1.11–1.29) were obtained. The “living” feature of the obtained polymer was further confirmed by a chain‐extension experiment. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2002–2008, 2009     

Preparation of molecularly imprinted polymers via atom transfer radical “bulk” polymerization

The first application of atom transfer radical “bulk” polymerization (ATRBP) in molecular imprinting is described, which provides molecularly imprinted polymers (MIPs) with obvious imprinting effects towards the template, very fast binding kinetics, and an appreciable selectivity over structurally related compounds. In comparison with the MIP prepared via the normally used traditional “bulk” free radical polymerization (BFRP), the MIPs obtained via ATRBP showed somewhat lower binding capacities and apparent maximum numbers N_max for high‐affinity sites as well as quite similar binding association constants K_a for high‐affinity sites and high‐affinity site densities, in contrast with the previous reports (e.g., nitroxide/iniferter‐mediated “bulk” polymerization provided MIPs with improved properties). This is tentatively ascribed to the occurrence of rather fast gelation process in ATRBP, which greatly restricted the mobility of the chemical species, leading to a heavily interrupted equilibrium between dormant species and active radicals and heterogeneous polymer networks. In addition, the general applicability of ATRBP was also confirmed by preparing MIPs for different templates. This work clearly demonstrates that applying controlled radical polymerizations (CRPs) in molecular imprinting not always benefits the binding properties of the resultant MIPs, which is of significant importance for the rational use of CRPs in generating MIPs with improved properties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 532–541, 2010     

High solubility,low‐dielectric constant,and optical transparency of novel polyimides derived from 3,3′,5,5′‐tetramethyl‐4,4′‐diaminodiphenyl‐4″‐isopropyltoluene

A series of novel polyimides (PIs) ( 3a–d ) were prepared from 3,3′,5,5′‐tetramethyl‐4,4′‐diaminodiphenyl‐4 ″ ‐isopropyltoluene ( 1 ) with four aromatic dianhydrides via a one‐step high temperature polycondensation procedure. The obtained PIs showed excellent solubility, with most of them dissoluble at a concentration of 10 wt % in amide polar solvents and chlorinated solvents. Their films were nearly colorless and exhibited high‐optical transparency, with the UV cutoff wavelength in the range of 328–353 nm and the transparency at 450 nm >80%. They also showed low‐dielectric constant (2.49–2.94 at 1 MHz) and low‐water absorptions (0.44–0.65%). Moreover, these PIs possessed high‐glass transition temperatures (T_g) beyond 327 °C and excellent thermal stability with 10% weight loss temperatures in the range of 530–555 °C in nitrogen atmosphere. In comparison with some fluorinated poly(ether imide)s derived from the trifluoromethyl‐substituted bis(ether amine)s, the resultant PIs 3a–d showed better solubility, lower cutoff wavelength, and higher T_g. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3309–3317, 2009     

Preparation of comb‐like copolymers with amphiphilic poly(ethylene oxide)‐b‐polystyrene graft chains by combination of “graft from” and “graft onto” strategies

A novel method for preparation the comb‐like copolymers with amphihilic poly(ethylene oxide)‐block‐poly(styrene) (PEO‐b‐PS) graft chains by “graft from” and “graft onto” strategies were reported. The ring‐opening copolymerization of ethylene oxide (EO) and ethoxyethyl glycidyl ether (EEGE) was carried out first using α‐methoxyl‐ω‐hydroxyl‐poly(ethylene oxide) (mPEO) and diphenylmethyl potassium (DPMK) as coinitiation system, then the EEGE units on resulting linear copolymer mPEO‐b‐Poly(EO‐co‐EEGE) were hydrolyzed and the recovered hydroxyl groups were reacted with 2‐bromoisobutyryl bromide. The obtained macroinitiator mPEO‐b‐Poly(EO‐co‐BiBGE) can initiate the polymerization of styrene by ATRP via the “Graft from” strategy, and the comb‐like copolymers mPEO‐b‐[Poly(EO‐co‐Gly)‐g‐PS] were obtained. Afterwards, the TEMPO‐PEO was prepared by ring‐opening polymerization (ROP) of EO initiated by 4‐hydroxyl‐2,2,6,6‐tetramethyl piperdinyl‐oxy (HTEMPO) and DPMK, and then coupled with mPEO‐b‐[Poly(EO‐co‐Gly)‐g‐PS] by atom transfer nitroxide radical coupling reaction in the presence of cuprous bromide (CuBr)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) via “Graft onto” method. The comb‐like block copolymers mPEO‐b‐[Poly(EO‐co‐Gly)‐g‐(PS‐b‐PEO)] were obtained with high efficiency (≥90%). The final product and intermediates were characterized in detail. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1930–1938, 2009     

A New Approach for the Synthesis of Miktoarm Star Polymers Through a Combination of Thiol–Epoxy “Click” Chemistry and ATRP/Ring‐Opening Polymerization Techniques

A new approach was developed for synthesis of certain A₃B₃‐type of double hydrophilic or amphiphilic miktoarm star polymers using a combination of “grafting onto” and “grafting from” methods. To achieve the synthesis of desired miktoarm star polymers, acetyl protected poly(ethylene glycol) (PEG) thiols (M_n = 550 and 2000 g mol^?1) were utilized to generate A₃‐type of homoarm star polymers through an in situ protective group removal and a subsequent thiol–epoxy “click” reaction with a tris‐epoxide core viz. 1,1,1‐tris(4‐hydroxyphenyl)ethane triglycidyl ether. The secondary hydroxyl groups generated adjacent to the core upon the thiol–epoxy reaction were esterified with α‐bromoisobutyryl bromide to install atom transfer radical polymerization (ATRP) initiating sites. ATRP of N‐isopropylacrylamide (NIPAM) using the three‐arm star PEG polymer fitted with ATRP initiating sites adjacent to the core afforded A₃B₃‐type of double hydrophilic (PEG)₃[poly(N‐isopropylacrylamide)] (PNIPAM)₃ miktoarm star polymers. Furthermore, the generated hydroxyl groups were directly used as initiator for ring‐opening polymerization of ε‐caprolactone to prepare A₃B₃‐type of amphiphilic (PEG)₃[poly(ε‐caprolactone)]₃ miktoarm star polymers. The double hydrophilic (PEG)₃(PNIPAM)₃ miktoarm star polymers showed lower critical solution temperature around 34 °C. The preliminary transmission electron microscopy analysis indicated formation of self‐assembly of (PEG)₃(PNIPAM)₃ miktoarm star polymer in aqueous solution. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 146–156     

Synthesis,characterization, and cross‐linking of a library of statistical copolymers based on 2‐“soy alkyl”‐2‐oxazoline and 2‐ethyl‐2‐oxazoline

The synthesis of statistical copolymers consisting of 2‐ethyl‐2‐oxazoline (EtOx) and 2‐“soy alkyl”‐2‐oxazoline (SoyOx) via a microwave‐assisted cationic ring‐opening polymerization procedure is described. The majority of the resulting copolymers revealed polydispersity indices below 1.30. The reactivity ratios (r_EtOx 1.4 ± 0.3; r_SoyOx = 1.7 ± 0.3) revealed a clustered monomer distribution throughout the polymer chains. The thermal and surface properties of the pEtOx‐stat‐SoyOx copolymers were analyzed before and after UV‐curing demonstrating the decreased chain mobility after cross‐linking. In addition, the cross‐linked materials showed shape‐persistent swelling upon absorption of water from the air, whereby as little as 5 mol % SoyOx was found to provide efficient cross‐linking. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5371,–5379, 2007     

Rapid ring‐opening polymerization of 1,4‐dioxan‐2‐one initiated by titanium alkoxides

Ring‐opening polymerization of 1,4‐dioxan‐2‐one in bulk was initiated by three titanium alkoxides, titanium dichlorodiisopropoxide (TiCl₂(OiPr)₂), titanium chlorotriisopropoxide (TiCl(OiPr)₃), and titanium tetraisopropoxide (Ti(OiPr)₄). The results indicate that the polymerization rate increased with number of OiPr groups in the initiator. High conversion of monomer (90%) and high molecular weight (11.9 × 10⁴ g/mol) of resulting polymer can be achieved in only 5 min at 60 °C with Ti(OiPr)₄ as an initiator. Analysis on nuclear magnetic resonance (NMR) spectra suggests the initiating sites for TiCl₂(OiPr)₂, TiCl(OiPr)₃, and Ti(OiPr)₄ to be 1.9, 2.6, and 3.8, respectively. Coordination‐insertion mechanism for the polymerization via cleavage of the acyl–oxygen bonds of the monomer was proved by NMR investigation. Kinetic studies indicate that polymerization initiated by Ti(OiPr)₄ followed a first‐order kinetics, with an apparent activation energy of 33.7 kJ/mol. It is noteworthy that this value is significantly lower than earlier reported values with other catalysts, namely La(OiPr)₃ (50.5 kJ/mol) and Sn(Oct)₂ (71.8 kJ/mol), which makes it an attractive catalyst for reactive extrusion polymerization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of star graft copolymers with asymmetric mixed “V‐shaped” side chains via “click” chemistry on a hyperbranched polyglycerol core

The star graft copolymers composed of hyperbranched polyglycerol (HPG) as core and well defined asymmetric mixed “V‐shaped” identical polystyrene (PS) and poly(tert‐butyl acrylate) as side chains were synthesized via the “click” chemistry. The V‐shaped side chain bearing a “clickable” alkyne group at the conjunction point of two blocks was first prepared through the combination of anionic polymerization of styrene (St) and atom transfer radical polymerization of tert‐butyl acrylate (tBA) monomer, and then “click” chemistry was conducted between the alkyne groups on the side chains and azide groups on HPG core. The obtained star graft copolymers and intermediates were characterized by gel permeation chromatography (GPC), GPC equipped with a multiangle laser‐light scattering detector (GPC‐MALLS), nuclear magnetic resonance spectroscopy and fourier transform infrared. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1308–1316, 2009     

Synthesis and characterization of well‐defined ABC 3‐Miktoarm star‐shaped terpolymers based on poly(styrene), poly(ethylene oxide), and poly(ϵ‐caprolactone) by combination of the “living” anionic polymerization with the ring‐opening polymerization

A series of well‐defined ABC 3‐Miktoarm star‐shaped terpolymers [Poly(styrene)‐Poly(ethylene oxide)‐Poly(ε‐caprolactone)](PS‐PEO‐PCL) with different molecular weight was synthesized by combination of the “living” anionic polymerization with the ring‐opening polymerization (ROP) using macro‐initiator strategy. Firstly, the “living” poly(styryl)lithium (PS^?Li⁺) species were capped by 1‐ethoxyethyl glycidyl ether(EEGE) quantitatively and the PS‐EEGE with an active and an ethoxyethyl‐protected hydroxyl group at the same end was obtained. Then, using PS‐EEGE and diphenylmethylpotassium (DPMK) as coinitiator, the diblock copolymers of (PS‐b‐PEO)_p with the ethoxyethyl‐protected hydroxyl group at the junction point were achieved by the ROP of EO and the subsequent termination with bromoethane. The diblock copolymers of (PS‐b‐PEO)_d with the active hydroxyl group at the junction point were recovered via the cleavage of ethoxyethyl group on (PS‐b‐PEO)_p by acidolysis and saponification successively. Finally, the copolymers (PS‐b‐PEO)_d served as the macro‐initiator for ROP of ε‐CL in the presence of tin(II)‐bis(2‐ethylhexanoate)(Sn(Oct)₂) and the star(PS‐PEO‐PCL) terpolymers were obtained. The target terpolymers and the intermediates were well characterized by ¹H‐NMR, MALDI‐TOF MS, FTIR, and SEC. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1136–1150, 2008     

Hyperbranched framework of interrupted π‐conjugated polymers end‐capped with high carrier‐mobility moieties for stable light‐emitting materials with low driving voltage

A novel series of soluble hyperbranched interrupted π‐conjugated polymers (HICPs) based on complicated 9,9‐diarylfluorenes (CDAFs) branching core and end‐capped with high carrier‐mobility pyrene moieties were synthesized via the “A₂ + A′₂ + B₃” type Suzuki coupling condensation. The new polymer architecture improves the spectrum stability than the corresponding linear and hyperbranched polymers in PLEDs. Besides, it overcomes the drawback of high driving voltage of common interrupted π‐conjugated polymers. CDAF1 exhibits excellent thermal and morphological stability with a decomposition temperature (T_d) higher than 445 °C and a glass transition temperature (T_g) up to 128 °C. No obvious low‐energy green emission band at 520 nm was observed under extreme thermal annealing conditions in air at 200 °C for 12 h. The CDAF1 device shows stable blue emission with the peak at 422 and 447 nm. The Commission International d'Eclairage (CIE) 1931 coordinates is (0.18, 0.16) and the brightness reaches 1051 cd/m² at 15.7 V. White PLED based on CDAF1/MEH‐PPV blends exhibits a low turn‐on voltage of 4.8 V with voltage‐independent CIE of (0.32, 0.32). Molecular simulations were used to investigate the conformation and interchain interaction. HICPs based on CDAFs tethered with high‐mobility moieties are promising stable blue and host materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6451–6462, 2009