Phosgene‐free synthesis of polypeptides: Useful synthesis for hydrophobic polypeptides through polycondensation of activated urethane derivatives of α‐amino acids

We report a useful synthetic method of polypeptides using a series of urethane derivative of α‐amino acids (l ‐leucine, l ‐phenylalanine, l ‐valine, l ‐alanine, l ‐isoleucine, l ‐methionine), which are readily synthesized by N‐carbamoylation of tetrabutylammonium salts of α‐amino acids with diphenyl carbonate. Heating these urethane derivatives in N,N‐dimethylacetamide in the presence of n‐butylamine successfully gave the corresponding polypeptides with well‐defined structures through polycondensation with the elimination of phenol and CO₂. The matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry investigation showed that the resulting polypeptides had an n‐BuNH₂‐incorporated initiating end and an amino group at propagating end. These results strongly indicated that primary amines served as an initiator in this polycondensation system. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3726–3731     

Tertiary amine catalyzed polymerizations of α‐amino acid N‐carboxyanhydrides: The role of cyclization

Sarcosine N‐carboxyanhydride, D,L ‐alanine N‐carboxyanhydride, D,L ‐phenylalanine N‐carboxyanhydride, and D,L ‐leucine N‐carboxyanhydride were polymerized with pyridine or N‐ethyldiisopropylamine as the catalyst. With pyridine, cyclic oligo‐ and polypeptides were obtained in addition to water‐initiated or water‐terminated chains. The cyclopeptides were the main products in the case of sarcosine N‐carboxyanhydride and D,L ‐phenylalanine N‐carboxyanhydride. The fraction of cycles was particularly high when N‐methylpyrrolidone was used as the reaction medium. These results suggested the existence of a pyridine‐catalyzed zwitterionic mechanism. However, cyclopeptides were also obtained with N‐ethyldiisopropylamine as the catalyst. In this case, N‐deprotonation of N‐carboxyanhydrides, followed by the formation of N‐acyl N‐carboxyanhydride chain ends, was the most likely initiation mechanism. Various chain‐growth mechanisms were examined. In the case of γ‐benzyl ester‐L ‐glutamate N‐carboxyanhydride, side reactions such as the formation of pyroglutamoyl end groups were detected. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4680–4695, 2006     

The Surface Modification of Hydroxyapatite Nanoparticles by the Ring Opening Polymerization of γ‐Benzyl‐L‐glutamate N‐carboxyanhydride

The surface modification of hydroxyapatite (HA) nanoparticles by the ring opening polymerization (ROP) of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (BLG‐NCA) was proposed to prepare the poly(γ‐benzyl‐L ‐glutamate) (PBLG)‐grafted HA nanoparticles (PBLG‐g‐HA) for the first time. HA nanoparticles were firstly treated by 3‐aminopropylthriethoxysilane (APS) and then the terminal amino groups of the modified HA particles initiated the ROP of BLG‐NCA to obtain PBLG‐g‐HA. The process was monitored by XPS and FT‐IR. The surface grafting amounts of PBLG on HA ranging from 12.1 to 43.1% were characterized by thermal gravimetric analysis (TGA). The powder X‐ray diffraction (XRD) analysis confirmed that the ROP only underwent on the surface of HA nanoparticles without changing its bulk properties. The SEM measurement showed that the PBLG‐g‐HA hybrid could form an interpenetrating net structure in the self‐assembly process. The PBLG‐g‐HA hybrid could maintain higher colloid stability than the pure HA nanoparticles. The in vitro cell cultures suggested the cell adhesion ability of PBLG‐g‐HA was much higher than that of pure HA.

     

Hydroxyl‐tolerated polymerization of N‐phenoxycarbonyl α‐amino acids: A simple way to polypeptides bearing hydroxyl groups

Differing from the moisture‐sensitive α‐amino acid N‐carboxyanhydrides (AA‐NCAs) monomers, N‐phenoxycarbonyl α‐amino acids (AA‐NPCs) can be prepared and stored in open air. In this contribution, we report that the controlled polymerizations of AA‐NPC monomers of O‐tert‐butyl‐dl ‐serine (BRS‐NPC), N^ε‐benzyloxycarbonyl‐l ‐lysine (ZLL‐NPC) and N^ε‐trifluoroacetyl‐l ‐lysine (FLL‐NPC) initiated by amines are surprisingly able to tolerate common nucleophilic impurities such as water and alcohols at a level of monomer concentration. The structures of polypeptides synthesized in the presence of water or alcohols agree well with the designed ones in the case of repeated chain extensions. Detailed mechanism study and density functional theory calculation reveal that the low concentration of AA‐NCA and the high activity of amines are the key factors to the controllability of AA‐NPC polymerizations. The water‐ and alcohol‐tolerant property in polymerizations of AA‐NPCs encourages the following studies on unprotected (phenolic) hydroxyl groups containing AA‐NPCs. The controllable polymerizations of N‐phenoxycarbonyl l ‐tyrosine (LT‐NPC) and N‐phenoxycarbonyl S‐(3‐hydroxypropyl)‐l ‐cysteine (HLC‐NPC) initiated by amines are confirmed and reported for the first time, which extends the library of AA‐NPCs and polypeptides as well. All the universality of library, the convenience of monomer preparation, and the controllability and water‐ and alcohol‐tolerant property of polymerization of AA‐NPCs significantly enhance the feasibility of polypeptide synthesis, making AA‐NPC approach a promising synthetic method of polypeptides. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 907–916     

Synthesis of polypeptides from activated urethane derivatives of α‐amino acids

A series of activated urethane‐type derivatives of α‐amino acids were synthesized and applied to polypeptide synthesis. The urethane used herein, N‐(4‐nitrophenoxycarbonyl)‐α‐amino acids 1 , were synthesized by N‐carbamoylation of γ‐benzyl‐L ‐glutamate, β‐benzyl‐L ‐aspartate, L ‐leucine, L ‐phenylalanine, and L ‐proline, with 4‐nitrophenyl chloroformate. When 1 was dissolved in N,N‐dimethylacetamide (DMAc) and heated at 60 °C, it was smoothly converted into the corresponding polypeptides with releasing 4‐nitrophenol and carbon dioxide. Spectroscopic analyses of the obtained polypeptides revealed that they were comparable with the authentic polypeptides synthesized by the ring‐opening polymerizations of amino acid N‐carboxyanhydrides (NCAs). Besides the successful polycondensations of a series of 1 , their polycondensations of 1a and other 1 were also successfully carried out to obtain the corresponding statistic copolypeptides. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2525–2535, 2008     

Convenient synthesis of poly(γ‐benzyl‐L‐glutamate) from activated urethane derivatives of γ‐benzyl‐L‐glutamate

A series of activated urethane‐type derivatives of γ‐benzyl‐L ‐glutamate were synthesized, and their potential as monomers for polypeptide synthesis was investigated. The derivatives of the focus of this work were a series of N‐aryloxycarbonyl‐γ‐benzyl‐L ‐glutamate 1 , of which aryl groups were phenyl, 4‐chlorophenyl, and 4‐nitrophenyl. These urethanes 1 were reactive in polar solvents such as dimethylsulfoxide, N,N‐dimethylformamide (DMF), and N,N‐dimethylacetamide (DMAc), and were efficiently converted into poly(γ‐benzyl‐L ‐glutamate) (poly(BLG)) under mild conditions; at 60 °C without addition of any catalyst. Among the three urethanes, that having 4‐nitrophenoxycarbonyl group 1c was the most reactive to give poly(BLG) efficiently, as was expected from the highly electron deficient nature of the nitrophenoxycarbonyl group. On the other hand, the urethane 1a having phenoxycarbonyl group was also efficiently converted into poly(BLG), in spite of the intrinsically less electrophilicity of the phenoxycarbonyl group. In addition, the successful formation of poly(BLG) by the reaction of 1a favored its diluted concentration (0.1 M) much more than 2.0 M, the optimum initial concentration for 1c . ¹H NMR spectroscopic analyses of the reactions in situ revealed that the predominant pathway from 1 to poly(BLG) involved the intramolecular cyclization of 1 into the corresponding N‐carboxyanhydride, with release of phenol and its successive ring‐opening polymerization with release of carbon dioxide. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2649–2657, 2008     

Deprotonation reaction of α‐amino acid N‐carboxyanhydride at 4‐CH position by yttrium tris[bis(trimethylsilyl)amide]

Reaction of yttrium tris[bis(trimethylsilyl)amide] [(TMSN)₃Y] with equivalent L ‐alanine N‐carboxyanhydride (ALA NCA) yields yttrium α‐isocyanato carboxylate ( II ), yttrium ketenyl carbamate ( III ), and hexamethyldisilazane ( V ). The products indicate that 4‐CH group of ALA NCA monomer is deprotonated in addition to 3‐NH group, which has been neglected in NCA chemistry for decades. This result proves the acidity of 4‐CH in NCA and provides the first direct evidence for racemization phenomenon of NCA in strong base in microscopic aspect. Rare earth tris[bis(trimethylsilyl)amide] (TMSN)₃Ln (Ln = Sc, Y, La, Dy, and Lu) compounds are high efficient catalysts for ring‐opening polymerizations of NCAs. Polypeptides can be produced in quantitative yields with narrow molecular weight distributions below 1.3, and block copolypeptides can be facilely prepared by sequential addition method. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cyclic polypeptides by thermal polymerization of α‐amino acid N‐carboxyanhydrides

The NCAs of the following five amino acids were polymerized in bulk at 120 °C without addition of a catalyst or initiator: sarcosine (Sar), L ‐alanine (L ‐Ala), D ,L ‐phenylalanine (D ,L ‐Phe), D ,L ‐leucine (D ,L ‐Leu) and D ,L ‐valine (D,L ‐Val). The virgin reaction products were characterized by viscosity measurements ¹³C NMR spectroscopy and MALDI‐TOF mass spectrometry. In addition to numerous low molar mass byproducts cyclic polypeptides were formed as the main reaction products in the mass range above 800 Da. Two types of cyclic oligo‐ and polypeptides were detected in all cases with exception of sarcosine NCA, which only yielded one class of cyclic polypeptides. The efficient formation of cyclic oligo‐ and polypeptides explains why high molar mass polymers cannot be obtained by thermal polymerizations of α‐amino acid NCAs. Various polymerization mechanisms were discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4012–4020, 2008     

Optimization of an α‐(Amino acid)‐N‐carboxyanhydride polymerization using the high vacuum technique: Examining the effects of monomer concentration,polymerization kinetics,polymer molecular weight,and monomer purity

l ‐Ornithine‐based poly(peptides) have been widely utilized in the field of drug delivery, however few studies have been conducted examining the details of polymerization. In this article, the effects of monomer concentration, polymerization kinetics, polymer molecular weight and monomer purity were investigated using l ‐carboxybenzyl (Cbz)‐ornithine as a model monomer. The mechanism of polymerization herein follows the normal amine mechanism to produce poly(peptides) having controlled molecular weights, known chain ends and a narrow polydispersity index (PDI). A preferred monomer concentration range was determined, which required minimal polymerization times and allowed for predictable and reproducible molecular weights with narrow PDIs. The impact of monomer purity on the polymerization was established and monomer purification conditions are reported, which produce high‐purity monomer after a single recrystallization. Additionally, the optimized polymerization conditions and monomer purification protocol were combined with a sequential monomer addition technique to produce high molecular weight poly(ornithine) with a narrow PDI and known chain ends. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1385–1391     

Peptide block copolymers by N‐carboxyanhydride ring‐opening polymerization and atom transfer radical polymerization: The effect of amide macroinitiators

The synthesis of polypeptide‐containing block copolymers combining N‐carboxyanhydride (NCA) ring‐opening polymerization and atom transfer radical polymerization (ATRP) was investigated. An amide initiator comprising an amine function for the NCA polymerization and an activated bromide for ATRP was used. Well‐defined polypeptide macroinitiators were obtained from γ‐benzyl‐L ‐glutamate NCA, O‐benzyl‐serine NCA, and N‐benzyloxy‐L ‐lysine. Subsequent ATRP macroinitiation from the polypeptides resulted in higher than expected molecular weights. Analysis of the reaction products and model reactions confirmed that this is due to the high frequency of termination reactions by disproportionation in the initial phase of the ATRP, which is inherent in the amide initiator structure. In some cases selective precipitation could be applied to remove unreacted macroinitiator to yield well‐defined block copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Selectivity in anionic and cationic ring‐opening polymerizations of tetramethyl‐1‐(3′‐trifluoromethylphenyl)‐1‐phenylcyclotrisiloxane and tetramethyl‐1‐[3′,5′‐bis(trifluoromethyl)phenyl]‐1‐phenylcyclotrisiloxane

Anionic and cationic ring‐opening polymerizations of two novel cyclotrisiloxanes, tetramethyl‐1‐(3′‐trifluoromethylphenyl)‐1‐phenylcyclotrisiloxane ( I ) and tetramethyl‐1‐[3′,5′‐bis(trifluoromethyl)phenyl]‐1‐phenylcyclotrisiloxane ( II ), are reported. Anionic ring‐opening polymerization of I or II leads to copolymers with highly regular microstructures. Copolymers obtained by cationic polymerizations of I or II , initiated by triflic acid, have less regular microstructures characteristic of chemoselective polymerization processes. The composition and microstructure of copolymers have been characterized by ¹H and ²⁹Si‐NMR, the molecular weight distributions by GPC, and the thermal properties by DSC and TGA. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5235–5243, 2004     

Functional polyesters prepared by polymerization of α‐allyl(valerolactone) and its copolymerization with ε‐caprolactone and δ‐valerolactone

We report the ring‐opening homopolymerization of α‐allyl(valerolactone), compound 2 , and its copolymerization with ε‐caprolactone and δ‐valerolactone using stannous(II) catalysis. Although the polymerization of substituted δ‐valerolactones has received little attention for the preparation of functional polyesters, we found that compound 2 may be incorporated in controllable amounts into copolymers with other lactones, or simply homopolymerized to give a highly functionalized, novel poly(valerolactone). The presence of the pendant allyl substituent had a substantial impact on the thermal properties of these materials relative to conventional polyesters prepared from lactones, and most of the polymers presented here are liquids at room temperature. Dihydroxylation of the pendant allyl groups gave polyesters with increased hydrophilicity that degraded more or less rapidly depending on their extent of functionality. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1983–1990, 2002     

Cationic copolymerization of racemic‐β‐butyrolactone with L,L‐lactide: One‐pot synthesis of block copolymers

Cationic copolymerization of racemic‐β‐butyrolactone (β‐BL) with l,l ‐lactide (LA) initiated by alcohol and catalyzed by trifluoromethanesulfonic acid proceeding by activated monomer (AM) mechanism was investigated. Although both comonomers were present from the beginning in the reaction mixture, polymerization proceeded in sequential manner, with poly‐BL formed at the first stage acting as a macroinitiator for the subsequent polymerization of LA. Such course of copolymerization was confirmed by following the consumption of both comonomers throughout the process as well as by observing the changes of growing chain‐end structure using ¹H NMR. ¹³C NMR analysis and thermogravimetry revealed the block structure of resulting copolymers. The proposed mechanism of copolymerization was confirmed by the studies of changes of ¹H NMR chemical shift of acidic proton in the course of copolymerization, providing an indication that indeed protonated species and hydroxyl groups are present throughout the process, as required for AM mechanism. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4873–4884     

Synthesis of a new 2‐amino‐glycan,poly‐(1→6)‐α‐D‐mannosamine,by ring‐opening polymerization of 1,6‐anhydro‐mannosamine derivatives

A stereoregular 2‐amino‐glycan composed of a mannosamine residue was prepared by ring‐opening polymerization of anhydro sugars. Two different monomers, 1,6‐anhydro‐2‐azido‐mannose derivative ( 3 ) and 1,6‐anhydro‐2‐(N, N‐dibenzylamino)‐mannose derivative ( 6 ), were synthesized and polymerized. Although 3 gave merely oligomers, 6 was promptly polymerized into high polymers of the number‐average molecular weight (M_n) of 2.3 × 10⁴ to 2.9 × 10⁴ with 1,6‐α stereoregularity. The differences of polymerizability of 3 and 6 from those of the corresponding glucose homologs were discussed. It was found that an N‐benzyl group is exceedingly suitable for protecting an amino group in the polymerization of anhydro sugars of a mannosamine type. The simultaneous removal of O‐ and N‐benzyl groups of the resulting polymers was achieved by using sodium in liquid ammonia to produce the first 2‐amino‐glycan, poly‐(1→6)‐α‐D ‐mannosamine, having high molecular weight through ring‐opening polymerization of anhydro sugars.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Promoting effects of urethane derivatives of phenols on the ring‐opening polymerization of 1,3‐benzoxazines

For the purpose of reducing the induction period of the ring‐opening polymerization of N‐methyl‐1,3‐benzoxazines, several urethanes were examined as promoters. The examined promoters 3a – d were the adducts of resorcinol and phenyl isocyanate, that of bisphenol A and phenyl isocyanate, that of resorcinol and butyl isocyanate, and that of 1,3‐propanediol and phenyl isocyanate, respectively. The aromatic urethanes 3a and 3b , which were adducts of the phenolic compounds and phenyl isocyanate, exhibited significant promoting effects. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011