A quinoxaline derivative as a long wavelength photosensitizer for diaryliodonium salts

This article reports the use of a quinoxaline derivative as a photosensitizer for diaryliodonium salt photoinitiators. 2,3‐bis(3,4‐bis(decyloxy)phenyl)‐5,8‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)quinoxaline (DOPEQ), is a highly conjugated compound with strong absorption bands at wavelengths ranging from 300 to 550 nm and is shown to facilitate photoinitiated cationic polymerization of heterocyclic monomers such as oxiranes and oxetanes. The polymerizations are initiated at room temperature by using long wavelength UV light in the presence of diphenyliodonium hexafluorophosphate (Ph₂I⁺PF). The polymerizations are monitored by optical pyrometry (OP). It is also possible to initiate photopolymerizations with ambient solar irradiation in the presence of this photosensitizer dye. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 209–213, 2010     

(4-苯硫基-苯基)二苯基硫鎓六氟磷酸盐的合成研究

以P₂O₅为脱水剂,甲烷磺酸为溶剂,二苯亚砜与二苯硫醚反应制备了(4-苯硫基-苯基)二苯基硫六氟磷酸盐.对产物进行了元素分析、紫外光谱、红外光谱、气-质联用和核磁共振的结构确证.该硫盐对环氧树脂具有良好的固化性能.     

Novel photocurable monomers: The synthesis of difunctional vinyl ethers with a phosphonate group and difunctional 1‐propenyl ethers with a phosphonate group and their photoinitiated cationic polymerization

Phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were prepared by the regioselective addition reaction of glycidyl vinyl ether (GVE) or 1‐propenyl glycidyl ether with diaryl phosphonates with quaternary onium salts as catalysts. The reaction of GVE with bis(4‐chlorophenyl) phenylphosphonate gave bis[1‐(4‐chlorophenoxy methyl)‐2‐(vinyloxy)ethyl]phenylphosphonate in a 68% yield. The structures of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were confirmed by IR and ¹H NMR spectra and elemental analysis. Photoinitiated cationic polymerizations of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were investigated with photoacid generators. The polymerization of vinyl ether groups and 1‐propenyl ether groups of the obtained monomers proceeded very smoothly with a sulfonium‐type cationic photoinitiator, bis[4‐(diphenylsulfonio)phenyl]sulfide‐bis(hexafluorophosphate), upon UV irradiation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3105–3115, 2005     

Unusually highly efficient,singlet state,visible light photoinitiators based on styrylbenzimidazolium phenyltributylborate photoredox pairs for vinyl monomers free radical polymerization

In this article, hemicyanine dye–borate complexes, for example, 1,3‐dimethyl‐2‐[4‐(N,N‐dialkylamino)styryl]benzimidazolium phenyl‐tri‐n‐butylborates, were employed as the novel, very effective photoinitiators operating in the visible light region. The influence of the sensitizers and electron donor structure on the photopolymerization kinetics of multiacrylate monomer was investigated by photo‐DSC. The maximum photopolymerization quantum yield measured for 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol triacrylate (TMPTA) was about 67 for sample of thickness of about 1 mm under 100 mW/cm² laser irradiation. It was found that the polymerization rate and the final conversion degree were depended on the dye structure. Moreover, the photoinitiating systems described gave a double bond conversion higher than the photoinitiator possessing as chromophore RBAX (Rose Bengal derivative), the common triplet state initiator. Additionally, the rate of photopolymerization depends on ΔG_el of electron transfer between borate anion and styrylbenzimidazolium cation. This latter value was estimated for a series of styrylbenzimidazolium borate salts. The relationship between the rate of polymerization and the free energy of activation for electron transfer reaction gives the dependence predicted by the classical theory of electron transfer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4119–4129, 2009     

Photoinitiators with functional groups. VI. Chemically bound sensitizers

Several benzophenone‐ and thioxanthone‐based photosensitizers (PSs) were covalently bonded to hydroxyalkylphenone‐ and aminoalkylphenone‐based photoinitiators (PIs) to enhance the rate of the excitation‐transfer effect due to the close vicinity of the PS to the PI. The properties of these new systems were investigated with UV spectroscopy and photo‐differential scanning calorimetry. Broadband irradiation experiments and selective excitation of the PS were carried out for the physical mixtures and covalently bonded PI/PS combinations to investigate the effect of excitation transfer. Selective excitation of the PS chromophore revealed that the energy transfer was significantly increased in covalently bonded initiators in comparison with the physical mixtures. This effect was most pronounced for the hydroxyalkylphenones that were sensitized by suitable benzophenone derivatives, especially at low PI concentrations. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2285–2301, 2004     

Synthesis and dielectric properties of photoreactive polystyrene containing [1‐(3‐isopropenyl‐phenyl)‐1‐methyl‐ethyl]‐carbamate in the side chain

Novel polystyrene derivatives comprising [1‐(3‐isopropenyl‐phenyl)‐1‐methyl‐ethyl]‐carbamate in the side chain were synthesized as photoreactive copolymers. Poly(4‐vinylphenol) was made to react with 1‐(1‐isocyanato‐1‐methyl‐ethyl)‐3‐isopropenyl‐benzene (m‐TMI) and the unreacted hydroxyl groups were protected with acetyl chloride. The copolymers are highly sensitive to the radical photoinitiators that can be activated by irradiation of UV light (λ = 300–365 nm). FTIR spectroscopy was employed to monitor the structural changes in the copolymers exposed to UV irradiation. The dielectric properties of the copolymers were investigated by measuring the capacitance and calculating the permittivity as a function of frequency, along with the I–V characteristics. Their properties were compared with those of thermally crosslinkable poly(4‐vinylphenol) blended with poly(melamine‐co‐formaldehyde), which is frequently used as a dielectric layer in organic field‐effect transistors (OFETs). No significant dielectric dispersion was observed in the frequency range of 1 kHz–1 MHz. The dielectric constant was determined to be in the range of 4.2–6.0, which offers a potential for the application of these copolymers to OFET gate insulators. These soluble dielectrics exhibit good film uniformity and can also be patterned using a standard photolithographic technique. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1710–1718, 2008     

Photopolymerization of acrylates without photoinitiators with short‐wavelength UV radiation: A study with real‐time fourier transform infrared spectroscopy

This article reports on the UV photopolymerization of acrylates without photoinitiators. Initiation of the reaction was achieved by direct excitation of the acrylates during irradiation with short‐wavelength UV light by use of the 222‐nm emission of a KrCl^* excimer lamp. The reactivity of various acrylates was studied by real‐time Fourier transform infrared–attenuated total reflection spectroscopy. The rate and the extent of the reaction within the layer were strongly dependent on the depth of penetration of UV light, which was determined by the molar extinction coefficient of the acrylate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 894–901, 2004     

2,2,2‐trifluoroacetophenone‐based D‐π‐A type photoinitiators for radical and cationic photopolymerizations under near‐UV and visible LEDs

Two D‐π‐A‐type 2,2,2‐trifluoroacetophenone derivatives, namely, 4′‐(4‐( N,N‐diphenyl)amino‐phenyl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Ben) and 4′‐(4‐(7‐(N,N‐diphenylamino)‐9,9‐dimethyl‐9H‐fluoren‐2‐yl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Flu), are developed as high‐performance photoinitiators combined with an amine or an iodonium salt for both the free‐radical polymerization of acrylates and the cationic polymerization of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 450 nm). The photochemical mechanisms are investigated by UV‐Vis spectra, molecular‐orbital calculations, fluorescence, cyclic voltammetry, photolysis, and electron‐spin‐resonance spin‐trapping techniques. Compared with 2,2,2‐trifluoroacetophenone, both photoinitiators exhibit larger redshift of the absorption spectra and higher molar‐extinction coefficients. PI‐Ben and PI‐Flu themselves can produce free radicals to initiate the polymerization of acrylate without any added hydrogen donor. These novel D‐π‐A type trifluoroacetophenone‐based photoinitiating systems exhibit good efficiencies (acrylate conversion = 48%–66%; epoxide conversion = 85%–95%; LEDs at 365–450 nm exposure) even in low‐concentration initiators (0.5%, w/w) and very low curing light intensities (1–2 mW cm^?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1945–1954     

A study of the kinetics of the microwave cure of a phenylethynyl‐terminated imide model compound and imide oligomer (PETI‐5)

The kinetic mechanism of the microwave cure of a simple phenylethynyl‐terminated imide model compound, 3,4′‐bis[(4‐phenylethynyl)phthalimido]diphenyl ether (PEPA‐3,4′‐ODA) and a phenylethynyl‐terminated imide oligomer (PETI‐5, M_n 5000 g/mol) was studied. Dielectric properties of the model compound and PETI‐5 were measured in the microwave range from 0.4 GHz to 3 GHz. FTIR was used to follow the cure of the model compound (PEPA‐3,4′‐ODA), while thermal analysis (DSC) was used to follow the cure of the PETI‐5 oligomer. The changes in room temperature IR absorbance of phenylethynyl triple bonds at 2214 cm⁻¹ of PEPA‐3,4′‐ODA as a function of cure time were measured after cure temperatures of 300, 310, 320, and 330 °C. The changes in the glass‐transition temperature, T_g, of PETI‐5 as a function of cure time were measured after cure at 350, 360, 370, and 380 °C, respectively. The T_g 's were determined to calculated the relative extent of cure, x, of the PETI‐5 oligomer according to the DiBenedetto equation. For the model compound, the reaction followed first order kinetics, yielding an activation energy of 27.6 kcal/mol as determined by infrared spectroscopy. For PETI‐5, the reaction followed 1.5th order, yielding an activation energy of 17.1 kcal/mol for the whole cure reaction, as determined by T_g using the DiBenedetto method. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2526–2535, 2000     

Generation and Spectroscopic Identification of ClCNS,ClNCS and NCCNS

The photolysis of four chloro‐substituted thiadiazoles (3,4‐dichloro‐, 3‐chloro‐ and 3‐chloro‐4‐fluoro‐1,2,5‐thiadiazole; 3,5‐dichloro‐1,2,4‐thiadiazole) and 3,4‐dicyano‐1,2,5‐thiadiazole was investigated in inert solid‐argon matrices at cryogenic temperatures by means of UV irradiation at selected wavelengths of 254 and 280 nm. The photolysis products were identified by mid‐IR and UV spectroscopy. Evidence for the existence of three novel pseudohalides, namely, chloronitrile sulfide (ClCNS), chlorine isothiocyanate (ClNCS) and cyanogen N‐sulfide (NCCNS), was provided by direct spectroscopic methods supported by quantum chemical calculations. Ground‐state geometries, vibrational frequencies, IR intensities, and UV excitation energies of ClCNS, ClNCS and NCCNS were obtained from calculations using the B3LYP, CCSD(T) and SAC‐CI methods and the aug‐cc‐pV(T+d)Z basis set.     

Application of novel polymers with S‐alkylsulfonium salt moieties as alkylating agents and thermal latent cationic initiators

Sulfonium‐containing polymers prepared from dibenzothiophene and diphenyl sulfide were applied as both alkylating agents and latent initiators for the cationic polymerization of glycidyl phenyl ether. The alkylation of acetonitrile proceeded smoothly with poly(S‐n‐octyl‐2‐vinyldibenzothiophenium tetrafluoroborate) ( 4 ; 64 mol % octyldibenzothiophenium tetrafluoroborate unit) to give N‐(n‐octyl)acetamide in an excellent yield on the basis of the starting octyldibenzothiophenium tetrafluoroborate unit in 4 . The cationic polymerization of glycidyl phenyl ether was also carried out in the presence of poly(S‐methyl‐2‐vinyldibenzothiophenium tetrafluoroborate) or poly(S‐n‐octyl‐4‐vinyldiphenylsulfonium tetrafluoroborate) to confirm their moderate thermal latent activity. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3928–3933, 2001     

Synthesis and evaluation of an ester‐functional alkoxyamine for nitroxide‐mediated polymerization

The ester‐functional alkoxyamine 2,2‐dimethyl‐3‐(1‐(4‐(methoxycarbonyl)phenyl)ethoxy)‐4‐(4‐(methoxycarbonyl)phenyl)‐3‐azapentane ( 2 ) was efficiently synthesized for use as a functional initiator in nitroxide‐mediated polymerization. Two equivalents of 1‐(4‐(methoxycarbonyl)phenyl)ethyl radical were added across the double bond of 2‐methyl‐2‐nitrosopropane to form alkoxyamine 2 , which was found to control the polymerization of styrene, isoprene, and n‐butyl acrylate. The ester moieties were hydrolyzed for subsequent esterification with 1‐pyrenebutanol to form a dipyrene‐labeled initiator that was used to probe nitroxide end‐group fidelity after styrene polymerization. High retention of nitroxide was confirmed by UV‐vis studies over a range of monomer conversions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6342–6352, 2009     

Polymerization of 2‐Substituted 2‐Oxazolines Induced by Photocationic Initiators

2‐Ethyl‐2‐oxazoline (EOZO) was polymerized using two different photocationic initiators: a combination of bis{(4‐diphenylsulfonium)phenyl}sulfide bis{hexafluoroantimonate} and (4‐phenyl sulfide)phenyl diphenylsulfonium hexafluoroantimonate (Cyracure UVI® 6974) and (η⁵‐2,4‐cyclopentadien‐1‐yl)‐[η⁶‐(1‐methylethyl)benzene]iron hexafluorophosphate (Irgacure® 261). The experimental data is consistent with the premise that in the presence of Cyracure UVI® 6974 the initiation proceeds via a Brønstedt acid. In the second case the generation of oxazolinium growing species is intermediated by a complex derived from the initial ferrocenium salt.     

3‐Phenylethynyl phthalimide end‐capped imide oligomers and the cured polymers

In the past decades, 4‐phenylethynyl phthalic anhydride (4‐PEPA) has been the most important endcapper used for thermoset polyimide. As the isomer of4‐PEPA, 3‐phenylethynyl phthalic anhydride (3‐PEPA) has attracted our interest. In this article, 3‐PEPA was synthesized and a comparative study with 4‐PEPA on curing temperature, curing rate, thermal and mechanical properties of oligomers and cured polymers was presented. The new phenylethynyl endcapped model compound, N‐phenyl‐3‐phenylethynyl phthalimide, was synthesized and characterized. The molecular structure of model compound was determined via single‐crystal X‐ray diffraction and the thermal curing process was investigated by Fourier transform infrared. Differential scanning calorimetry clearly showed that the model compound from 3‐PEPA had about 20 °C higher curing onset and peak temperature than the 4‐PEPA analog. This result was further proved by the dynamic rheological analysis that the temperature of minimum viscosity for oligomers end‐capped with 3‐PEPA was above 20 °C higher than that of the corresponding 4‐PEPA endcapped oligomers with the same calculated number average molecular weight. The cured polymer from 3‐PEPA displayed slightly higher thermal oxidative stability than those from 4‐PEPA by thermogravimetric analysis. The thermal curing kinetics of 3‐PEPA endcapped oligomer (OI‐5) and 4‐PEPA endcapped oligomer (OI‐6) fitted a first‐order rate law quite well and revealed a similar rate acceleration trend. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4227–4235, 2008     

Photoinitiated cationic polymerization of monofunctional benzoxazine

The photoinitiated ring‐opening cationic polymerization of a monofunctional benzoxazine, 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine, with onium salts such as diphenyliodonium hexafluorophosphate and triphenylsulfonium hexafluorophosphate as initiators was examined. The structures of the polymers thus formed were complex and related to the ring‐opening process of the protonated monomer either at the oxygen or nitrogen atoms. The phenolic mechanism also contributed, but its influence decreased with decreasing monomer concentration. Thermal properties of the polymers were also investigated by differential scanning calorimetry and thermogravimetric analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3320–3328, 2003     

A new mechanism of benzophenone photoreduction in photoinitiated crosslinking of polyethylene and its model compounds

The photolytic products and a new photoreduction mechanism of benzophenone (BP) as a photoinitiator in the photocrosslinking of polyethylene (PE) and its model compounds (MD) have been studied by means of fluorescence, ESR, ¹³C and ¹H NMR spectroscopy. The fluorescence spectra from the PE and MD systems demonstrate that the main photoreduction product of BP (PPB) is benzpinacol formed by the recombination of two diphenylhydroxymethyl (K^•) radical intermediates. The ESR spectrum obtained from the UV irradiation of the MD/BP system gives positive evidence of K^• radicals. Two new PPB products: an isomer of benzpinacol with quinoid structure, 1‐phenyl‐hydroxymethylene‐4‐diphenyl‐hydroxymethyl‐2,5‐cyclohexa‐diene and three kinds of α‐alkylbenzhydrols have been detected and identified for the first time by ¹³C and ¹H NMR spectroscopy from the MD systems. The latter could be formed by the reactions of K^• radicals with alkyl radicals produced by hydrogen abstraction of the excited triplet state ³(BP)* from polyethylene or its model compounds. These results provide new experimental evidence for elucidating the photoreduction mechanism of BP in the photoinitiated crosslinking of polyethylene. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 999–1005, 2000     

Dibenzophenazine derivatives as visible photosensitizers for diaryliodonium salts

The use of two dibenzo[a,c]phenazine derivatives, 10,13‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)dibenzo[a,c]phenazine and 10,13‐bis(4‐hexylthiophen‐2‐yl)dibenzo[a,c]phenazine are reported as photosensitizers for diaryliodonium salt photoinitiators. Novel dyes based on the dibenzo[a,c]phenazine skeleton are shown to be efficient in carrying out the cationic photopolymerizations. Representative examples of different types of monomers including epoxide, and vinyl monomers are polymerized in the presence of the photosensitizers and diphenyliodonium hexafluorophosphate (Ph₂I⁺PF). Polymerizations are initiated at room temperature using long wavelength UV and visible light, and monitored by optical pyrometry. The photopolymerization of an epoxide monomer via solar irradiation is also demonstrated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Supramacromolecular self‐assembly: Chain extension,star and block polymers via pseudorotaxane formation from well‐defined end‐functionalized polymers

Dibenzo‐24‐crown‐8‐terminated polystyrene ( 5 ) was chain extended to “dimeric” 8 by pseudorotaxane formation with a ditopic guest, α,ω‐bis[p‐(N‐benzylammoniomethyl)phenoxy]heptane bis(hexafluorophosphate) ( 7 ). The three‐armed star polymer 11 was similarly formed by complexation of the dibenzo‐24‐crown‐8‐terminated polystyrene ( 5 ) with a tritopic secondary ammonium salt, 1,3,5‐tris[p‐(benzylammoniomethyl)phenyl]benzene tris(hexafluorophosphate) ( 10 ). Another three‐armed star polymer 13 was self‐assembled from dibenzo‐24‐crown‐8‐terminated polystyrene ( 5 ) and a tetratopic paraquat compound, 1,2,4,5‐tetrakis{p‐N‐[(N′‐methyl‐4,4′‐bipyridinium)methylphenyl]}benzene octakis(hexafluorophosphate) ( 12 ). The above chain extension and star polymer formation processes seemed to be cooperative; that is, the second and third complexation steps proceed with stepwise higher efficiencies than statistically expected. Dibenzo‐24‐crown‐8‐terminated polystyrene ( 5 ) was chain extended with secondary ammonium terminated polystyrene 14 , forming 16 , and also self‐assembled with a secondary ammonium ion terminated polyisoprene 15 to form supramolecular block copolymer 17 . These processes were examined by NMR, mass spectrometry and viscometery. Thus, although binding in these systems is not particularly strong (association constants <10⁴ M^?1), these examples provide proof‐of‐principle that pseudorotaxane formation is a viable concept for chain extension and self‐assembly of novel types of block copolymers and star polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3518–3543, 2009     

Tailored thioxanthone‐based photoinitiators for two‐photon‐controllable polymerization and nanolithographic printing

Printing of high‐resolution three‐dimensional nanostructures utilizing two‐photon polymerization has gained significant attention recently. In particular, isopropyl thioxanthone (ITX) has been implemented as a photoinitiator due to its capability of initiating and depleting polymerization on demand, but new photoinitiating materials are still needed in order to reduce the power requirements for the high‐throughput creation of 3D structures. To address this point, a suite of new thioxanthone‐based photoinitiators were synthesized and characterized. Then two‐photon polymerization was performed using the most promising photoinitiating molecule. Importantly, one of the initiators, 2,7‐bis[(4‐(dimethylamino)phenyl ethynyl)‐9H‐thioxanthen‐9‐one] (BDAPT), showed a fivefold improvement in the writing threshold over the commonly used ITX molecule. To elucidate the fundamental mechanism, the excitation and inhibition behavior of the BDAPT molecule were evaluated using density functional theory (DFT) calculations, low‐temperature phosphorescence spectroscopy, ultra‐fast transient absorption spectroscopy, and the two‐photon Z‐scan spectroscopic technique. The improved polymerization threshold of this new photoinitiator presents a clear pathway for the modification of photoinitiators in 3D nanoprinting. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1462–1475     

Triarylamine N‐functionalized 3,6‐linked carbazole main chain polymers and copolymers: Preparation and physical properties

The preparation of triarylamine N‐functionalized 3,6‐linked carbazole homopolymers as well as alternating copolymers with 2,5‐diphenyl‐[1,3,4]oxadiazole and benzo[1,2,5]thiadiazole was undertaken using Suzuki cross‐coupling polymerization procedures associating 3,6‐bis(4,4,5,5‐tetramethyl‐[1,3,2]dioxaborolan‐2‐yl)‐9‐(bis[4‐(2‐butyl‐octyloxy)‐phenyl]‐amino‐phen‐4‐yl)‐carbazole and, respectively, 3,6‐dibromo‐9‐(bis[4‐(2‐butyl‐octyloxy)‐phenyl]‐amino‐phen‐4‐yl)‐carbazole, 2,5‐bis(4‐bromo‐phenyl)‐[1, 3,4]oxadiazole, and 4,7‐dibromo‐benzo[1,2,5]thiadiazole. Both the carbazole homopolymer and alternating copolymer with 2,5‐diphenyl‐[1,3,4]oxadiazole were found as wideband gap materials emitting in the blue part of the electromagnetic spectrum while the carbazole alternating copolymer with 4,7‐benzo[1,2,5]thiadiazole had a narrower band gap and emitted in the orange part of the electromagnetic spectrum. The new polymers are thermally stable up to 300 °C. A discussion of the electrochemical and optical properties of the new polymers is presented. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5957–5967, 2007.