Structure and properties of polyethylene prepared via low‐frequency vibration‐assisted injection molding

A self‐made low‐frequency vibration‐assisted injection‐molding (VAIM) device was adopted to explore the relationship between mechanical property and morphology for high‐density polyethylene injected moldings. The main processing variables for the VAIM are vibration frequency and vibration pressure amplitude, and tensile properties and morphology were investigated under different VAIM processing conditions with conventional injection molding for comparison. The moldings prepared by VAIM exhibit a very well defined laminated morphology composed of a layered structure with enhanced crystallinity. Increased with vibration frequency at constant vibration pressure amplitude, the shish‐kebab structure is exhibited in the shear layer of the specimen prepared by VAIM, whereas row nucleation lamella exists in the same layer produced by enhanced vibration pressure amplitude at a constant vibration frequency. These oriented structures and enhanced crystallinity, confirmed by scanning electron microscopy, wide‐angle X‐ray diffraction, and differential scanning calorimetry, serve to obtain stronger injection moldings. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 13–21, 2005     

Device for non-disruptive taking of melt samples from a compounding process and direct injection molding

A concept for taking a sample from a polymer melt stream plus the direct processing of this melt to specimen is presented. Therefore, a melt sampling and direct injection molding (MSIM) device was developed. Process parameters were studied and the set-up was implemented successfully. Using the MSIM device, different thermoplastics were processed and provided specimen characterized. The mechanical material properties from samples of the MSIM process show a good consistency compared with data from conventional processes. The MSIM device can be used in production processes for quality control, e.g. color or mechanical properties, as well as in the field of research and development to reduce development cycles.     

Morphology evolution and crystalline structure of controlled‐rheology polypropylene in micro‐injection molding

In this paper, the microstructural evolution of controlled‐rheology polypropylene (CRPP) with different melt viscoelasticities was investigated by polarized optical microscopy, scanning electronic microscopy, differential scanning calorimeter, and wide‐angle X‐ray diffraction. It is found that a typical “skin‐core” structure formed in CRPP microparts and the thickness of oriented layer of CRPP microparts decreases notably with the addition of peroxide. The thickness of oriented layer and the distribution of different layers strongly depend on the melt flow properties and the corresponding relaxation time (λ). Furthermore, the mechanisms of the suppressed formation of oriented layers during the micro‐injection molding process are discussed mainly from the viewpoint of rheology and thermodynamics. It is revealed that the shear‐induced orientation is one of the key factors for the formation of oriented molecular structure (row nuclei). The final thickness of the oriented layer is the result of the competition between the orientation behavior and the disorientation behavior. Copyright © 2015 John Wiley & Sons, Ltd.     

Morphology and mechanical behavior of isotactic polypropylene with different stereo‐defect distribution in injection molding

Large amount of work has been published on the isotacticity–properties relationship of isotactic polypropylene (iPP). However, the stereo‐defect distribution dependence of morphology and mechanical properties of iPP injection molding samples is still not clear. In this study, two different isotactic polypropylene (iPP) resins (PP‐A and PP‐B) with similar average isotacticity but different stereo‐defect distribution were selected to investigate the morphology evolution and mechanical properties (tensile and notching) of their injection molding samples using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), 2D wide angle X‐ray diffraction (2D‐WAXD), and scanning electron microscope (SEM). The results of DMA showed that the molecular movement ability of PP‐A (with less uniform distribution of stereo‐defect) was stronger than that of PP‐B, meanwhile the analysis of DSC and SEM suggested that after injection molding, smaller spherullites, and crystals with higher perfection had formed in the specimens of PP‐A. The resulting of tensile properties of PP‐A were found to be better than that of PP‐B. The results of morphology evolution by SEM observation and 2D‐WAXD showed that PP‐A is more likely to occur interspherulite deformation and can disperse the tensile stress more efficiently, and therefore, its crystal structure can withstand a greater force when tensile stress is applied. On the other hand, PP‐B has larger spherulites and boundaries, and low perfection of lamellaes, and the intraspherulte deformation tend to take place. It is easier for the crystal of PP‐B to be broken up and reoriented along the tensile direction. Copyright © 2014 John Wiley & Sons, Ltd.     

Optimization of injection‐molding process for mechanical properties of polypropylene components via a generalized regression neural network

This study analyzed contour distortions, wear and tensile properties of polypropylene (PP) components applied in the interior coffer of automobiles. A hybrid method integrating a trained generalized regression neural network (GRNN) and a sequential quadratic programming (SQP) method is proposed to determine an optimal parameter setting of the injection‐molding process. The specimens were prepared under different injection‐molding conditions by changing melting temperatures, injection speeds, and injection pressures. Average contour distortions at six critical locations, wear and tensile properties were selected as the quality targets. Sixteen experimental runs, based on a Taguchi orthogonal array table, were utilized to train the GRNN and then the SQP method was applied to search for an optimal setting. The trained GRNN was capable of predicting average contour distortions, wear and tensile properties at various injection‐molding conditions. In addition, the analysis of variance (ANOVA) was implemented to identify significant factors for the molding process and the proposed algorithm was compared with traditional schemes like the Taguchi method and the design of experiments (DOE) approach. Copyright © 2007 John Wiley & Sons, Ltd.     

Ionic liquid and aqueous two‐phase extraction based on salting‐out coupled with high‐performance liquid chromatography for the determination of seven rare ginsenosides in Xue‐Sai‐Tong injection

A method of ionic liquid salt aqueous two‐phase extraction coupled with high‐performance liquid chromatography has been developed for the analysis of seven rare ginsenosides including Rg₆, F₄, 20(S)‐Rg₃, 20(R)‐Rg₃, Rk₃, Rk₁, and Rg₅ in Xue‐Sai‐Tong injection. The injection was mixed with ionic liquid 1‐butyl‐3‐methylimidazolium bromide aqueous solution, and a mixture was obtained. With the addition of sodium dodecyl sulfate and dipotassium phosphate into the mixture, the aqueous two‐phase mixture was formed after ultrasonic treatment and centrifuged. Rare ginsenosides were extracted into the upper phase. To obtain a high extraction factors, various influences were considered systematically, such as the volume of ionic liquid, the category and amount of salts, the amount of sodium dodecyl sulfate, the pH value of system, and the time of ultrasonic treatment. Under the optimal condition, rare ginsenosides in Xue‐Sai‐Tong injection were enriched and detected, the recoveries of seven rare ginsenosides ranged from 90.05 to 112.55%, while relative standard deviations were lower than 2.50%. The developed method was reliable, rapid and sensitive for the determination of seven rare ginsenosides in the injections.     

Viscoelastic behavior of semicrystalline polymers at elevated temperatures on the basis of a two‐process model for stress relaxation

Viscoelastic behavior at elevated temperatures of high‐density polyethylene and isotactic polypropylene was investigated by using the stress relaxation method. The results are interpreted from the view of an established two‐process model for stress relaxation in semicrystalline polymers. This model is based on the assumption that the stress relaxation can be represented as a superposition of two thermally activated processes acting in parallel. Each process is associated either with the crystal or amorphous phase of a polymer sample. It was found that the temperature dependence of viscosity coefficients and elastic moduli of these two fractions are similar in the two materials. The experimental data was correlated with literature data of α and β processes in polyethylene and polypropylene obtained from dynamic mechanical thermal analysis. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3239–3246, 2000     

Anti‐inflammatory bioactive equivalence of combinatorial components β‐carboline alkaloids identified in Arenaria kansuensis by two‐dimensional chromatography and solid‐phase extraction coupled with liquid–liquid extraction enrichment technology

Bioactive equivalent combinatorial components play a critical role in herbal medicines. However, how to discover and enrich them efficiently is a question for herbal pharmaceuticals researchers. In our work, a novel two‐dimensional reversed‐phase/hydrophilic interaction high‐performance liquid chromatography method was established to perform real‐time components trapping and combining for preparation and isolation of coeluting components. Arenaria kansuensis was taken as an example, and solid‐phase extraction coupled with liquid–liquid extraction as a simple and efficient method for enriching trace components, reversed phase column coupled with hydrophilic interaction liquid chromatography XAmide column as two‐dimensional chromatography technology for isolation and preparation of coeluting constituents, enzyme‐linked immune‐sorbent assay as bio‐guided assay, and anti‐inflammatory bioactivity evaluation for bioactive constituents. A combination of 12 β‐carboline alkaloids was identified as anti‐inflammatory bioactive equivalent combinatorial components from A. kansuensis , which accounts for 1.9% w/w of original A. kansuensis . This work answers the key question of which are real anti‐inflammatory components from A. kansuensis and provides a fast and efficient approach for discovering and enriching trace β‐carboline alkaloids from herbal medicines for the first time. More importantly, the discovery of bioactive equivalent combinatorial components could improve the quality control of herbal products and inspire a herbal medicine based on combinatorial therapeutics.     

Dispersive micro‐solid‐phase extraction combined with online preconcentration by capillary electrophoresis for the determination of glycopyrrolate stereoisomers in rat plasma

A simple and sensitive analytical method for four isomers of glycopyrrolate in rat plasma was developed using cation‐selective exhaustive injection‐sweeping cyclodextrin‐modified electrokinetic chromatography (CSEI‐Sweeping‐CDEKC) for online enrichment combined with dispersive micro‐solid‐phase extraction pretreatment. The CSEI‐Sweeping‐CDEKC was conducted on an uncoated fused silica capillary (40.2 cm × 75 μm) with an applied voltage of –20 kV. The electrophoretic analysis was carried out in 30 mM phosphate solution at pH 2.0 containing 20 mg/mL sulfated‐β‐cyclodextrin and 5% acetonitrile. Under these optimized conditions, the detection limit for racemic glycopyrrolate was found to be 2.0 ng/mL and this method could increase 495‐fold detection sensitivity compared with the traditional injection method. Additionally, the parameters that affected the extraction efficiency of dispersive micro‐solid‐phase extraction were also examined systematically. The glycopyrrolate isomers in rat plasma samples as low as 0.0625 μg/mL were able to be separated and detected by capillary electrophoresis with the aid of CSEI‐sweeping. The findings of this study show that the dispersive micro‐solid‐phase extraction pretreatment coupled with CSEI‐Sweeping‐CDEKC is a rapid and convenient method for analyzing glycopyrrolate isomers in rat plasma.     

Recent advances and applications of molecularly imprinted polymers in solid‐phase extraction for real sample analysis

Sample pretreatment is essential for the analysis of complicated real samples due to their complex matrices and low analyte concentrations. Among all sample pretreatment methods, solid‐phase extraction is arguably the most frequently used one. However, the majority of available solid‐phase extraction adsorbents suffer from limited selectivity. Molecularly imprinted polymers are a type of tailor‐made artificial antibodies and receptors with specific recognition sites for target molecules. Using molecularly imprinted polymers instead of conventional adsorbents can greatly improve the selectivity of solid‐phase extraction, and therefore molecularly imprinted polymer‐based solid‐phase extraction has been widely applied to separation, clean up and/or preconcentration of target analytes in various kinds of real samples. In this article, after a brief introduction, the recent developments and applications of molecularly imprinted polymer‐based solid‐phase extraction for determination of different analytes in complicated real samples during the 2015‐2020 are reviewed systematically, including the solid‐phase extraction modes, molecularly imprinted adsorbent types and their preparations, and the practical applications of solid‐phase extraction to various real samples (environmental, food, biological, and pharmaceutical samples). Finally, the challenges and opportunities of using molecularly imprinted polymer‐based solid‐phase extraction for real sample analysis are discussed.     

Fe3O4/polyethylene glycol nanocomposite as a solid‐phase microextraction fiber coating for the determination of some volatile organic compounds in water

A high‐performance metal oxide polymer magnetite/polyethylene glycol nanocomposite was prepared and coated in situ on the surface of the optical fiber by sol–gel technology. The magnetite nanoparticles as nanofillers were synthesized by a coprecipitation method and bonded with polyethylene glycol as a polymer. The chemically bonded coating was evaluated for the headspace solid–phase microextraction of some environmentally important volatile organic compounds from aqueous samples in combination with gas chromatography and mass spectrometry. The prepared fiber was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The mass ratio of nanofiller and polymer on the coating extraction efficiency, morphology, and stability were investigated. The parameters affecting the extraction efficiency, including the extraction time and temperature, the ionic strength, desorption temperature, and time were optimized. The sol–gelized fiber showed excellent chemical stability and longer lifespan. It also exhibited high extraction efficiency compared to the two types of commercial fibers. For volatile organic compounds analysis, the new fiber showed low detection limits (0.008–0.063 ng/L) and wide linearity (0.001–450 × 10⁴ ng/L) under the optimized conditions. The repeatability (interday and intraday) and reproducibility were 4.13–10.08 and 5.98–11.61%, and 7.35–14.79%, respectively (n = 5). For real sample analysis, three types of water samples (ground, surface, and tap water) were studied.     

Modified dispersive liquid‐phase microextraction based on sequential injection solidified floating organic drop combined with HPLC for the determination of phenobarbital and phenytoin

A modified dispersive liquid phase microextraction based on sequential injection solidified floating organic drop was developed for simultaneous separation/preconcentration of trace amounts of phenobarbital and phenytoin. The important factors affecting on the extraction recovery including pH, the volume of extraction solvent, ionic strength, and the number of injections were investigated and optimized by Box–Behnken design and desirability function. Under the optimum experimental conditions, the calibration graph was linear in the concentration range of 1.0–300.0 μg/L (r² = 0.997) for phenobarbital and 2.0–400.0 μg/L (r² = 0.996) for phenytoin. The limit of detection and limit of quantification were 0.35 and 1.2 μg/L for phenobarbital and 0.65 and 2.2 μg/L for phenytoin, respectively. The relative standard deviation for six replicate determinations at 10 μg/L was 3.3 and 4.1% for phenobarbital and phenytoin, respectively. The developed method was successfully applied to the determination of phenobarbital and phenytoin in urine and plasma samples.     

A steady‐state mass balance model of the polycarbonate–CO2 system reveals a self‐regulating cell growth mechanism in the solid‐state microcellular process

A simple mechanism regulating polymer mobility is demonstrated to determine initial and final growth states of solid‐state microcellular foams. This mechanism, governed by the extent of plasticization of the polymer by the dissolved gases, is examined with a mass balance model and results from foam growth experiments. Polycarbonate was exposed to CO₂, which acted as both a plasticizing gas and a physical blowing agent driving foam growth. The polycarbonate specimens were saturated to the equilibrium gas concentration at 25 °C for CO₂ pressures of 1–6 MPa in 1‐MPa increments. Equilibrated specimens were heated in a glycerin bath until thermal equilibrium was reached, and a steady foam structure was attained. Glycerin bath temperatures of 30–150 °C in 10 °C increments were examined. Using knowledge of gas solubility, the equation of state for CO₂, the effective glass‐transition temperature as a function of gas concentration, and a model for mass balance within a solid‐state foam, we demonstrate that foam growth terminates when sufficient gas is driven from the polycarbonate matrix into the foam cells. The foam cell walls freeze at the elevated bath temperature because of gas transport from the polycarbonate matrix and the associated rise in the polymer glass‐transition temperature to that of the heated bath. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 868–880, 2001     

Exploitation of a short monolithic column for in‐line separation and preconcentration: Environmental friendly determination of the emerging pollutant salicylic acid in natural waters

Salicylic acid is an emerging environmental contaminant, usually found at ng/L concentrations in natural waters. Its quantification usually involves liquid chromatography‐tandem mass spectrometry, which requires complex and costly instrumentation as well as time‐consuming sample pretreatment, typically involving large solvent volumes. In this work, sequential injection chromatography was exploited to develop a fast, green, cost‐effective, and highly sensitive procedure for fluorimetric determination of salicylic acid in natural waters. Analyte preconcentration directly on the chromatographic column (on‐column preconcentration) was exploited to improve detectability, yielding an enrichment factor of 122 (1.75 mL of sample) and takes only 8.5 min per determination. A detection limit of 20 ng/L, a linear response range from 0.06 to 5.00 µg/L, coefficients of variation lower than 3.0% (n = 10), and recoveries within 86 and 114% were estimated. The procedure was applied for the analyses of freshwater samples and results agreed with those obtained by liquid chromatography‐tandem mass spectrometry at the 95% confidence level. The proposed procedure encompasses in‐line concentration, isolation/separation, and detection, without the need for sample clean‐up, thus minimizing the consumption of organic solvents and risk of analyte losse.     

Optimization of multiwalled carbon nanotubes reinforced hollow‐fiber solid–liquid‐phase microextraction for the determination of polycyclic aromatic hydrocarbons in environmental water samples using experimental design

A novel design of hollow‐fiber liquid‐phase microextraction containing multiwalled carbon nanotubes as a solid sorbent, which is immobilized in the pore and lumen of hollow fiber by the sol–gel technique, was developed for the pre‐concentration and determination of polycyclic aromatic hydrocarbons in environmental water samples. The proposed method utilized both solid‐ and liquid‐phase microextraction media. Parameters that affect the extraction of polycyclic aromatic hydrocarbons were optimized in two successive steps as follows. Firstly, a methodology based on a quarter factorial design was used to choose the significant variables. Then, these significant factors were optimized utilizing central composite design. Under the optimized condition (extraction time = 25 min, amount of multiwalled carbon nanotubes = 78 mg, sample volume = 8 mL, and desorption time = 5 min), the calibration curves showed high linearity (R ² = 0.99) in the range of 0.01–500 ng/mL and the limits of detection were in the range of 0.007–1.47 ng/mL. The obtained extraction recoveries for 10 ng/mL of polycyclic aromatic hydrocarbons standard solution were in the range of 85–92%. Replicating the experiment under these conditions five times gave relative standard deviations lower than 6%. Finally, the method was successfully applied for pre‐concentration and determination of polycyclic aromatic hydrocarbons in environmental water samples.     

Selective solid‐phase extraction using a molecularly imprinted polymer for the analysis of patulin in apple‐based foods

The aim of this work was to evaluate the use of a molecularly imprinted polymer as a selective solid‐phase extraction sorbent for the clean‐up and pre‐concentration of patulin from apple‐based food products. Ultra high pressure liquid chromatography coupled to ultraviolet absorbance detection was used for the analysis of patulin. The molecularly imprinted polymer was applied, for the first time, to the determination of patulin in apple juice, puree and jam samples spiked within the maximum levels specified by the European Commission No. 1881/2006. High recoveries (>77%) were obtained. The method was validated and found to be linear in the range 2–100 μg/kg with correlation coefficients greater than 0.965 and repeatability relative standard deviation below 11% in all cases. Compared with dispersive solid‐phase extraction (QuEChERS method) and octadecyl sorbent, the molecularly imprinted polymer showed higher recoveries and selectivity for patulin. The application of Affinisep molecularly imprinted polymer as a selective sorbent material for detection of patulin fulfilled the method performance criteria required by the Commission Regulation No. 401/2006, demonstrating the suitability of the technique for the control of patulin at low ppb levels in different apple‐based foods such as juice, puree and jam samples.     

Synthesis and application of a novel solid‐phase extraction adsorbent for multiresidue analysis of insecticides in water

A new solid‐phase adsorbent was synthesized for the simultaneous enrichment of multiple classes of trace insecticides (neonicotinoids, organophosphates, fiproles, and organochlorines) in water. The adsorbent was spherical with a diameter, surface area, average pore volume, and pore size of approximately 5 μm, 341 m²/g, 0.092 m³/g, and 2.22 nm, respectively. Extraction conditions were optimized, including water pH and the type and volume of the rinsing and eluting solvents. After extraction, target insecticides were analyzed by gas chromatography with mass spectrometry and high‐performance liquid chromatography with tandem mass spectrometry. The recovery of neonicotinoids ranged from 63.0 to 124%, except for clothianidin (40.1–52.9%). Recoveries of organophosphates, fiproles, and organochlorines were in the ranges of 37.0–102, 64.0–101, and 42.0–69.3%, respectively. Relative standard deviations were <20% except for profenofos (5.1–30%) and method detection limits were 1.8–12.7 ng/L, suggesting that the precision and accuracy of the developed method were viable. At environmentally relevant concentrations, the new adsorbent achieved comparable recoveries of target insecticides to hydrophilic–lipophilic balance adsorbent while providing an additional advantage by further reducing matrix effects. Field water samples from the Pearl River in Guangzhou, China were analyzed, and the frequent detection of neonicotinoids raises concerns about their aquatic risk.     

Application of a dispersive solid‐phase extraction method using an amino‐based silica‐coated nanomagnetic sorbent for the trace quantification of chlorophenoxyacetic acids in water samples

Herein, an amino‐based silica‐coated nanomagnetic sorbent was applied for the effective extraction of two chlorophenoxyacetic acids (2‐methyl‐4‐chlorophenoxyacetic acid and 2,4‐dichlorophenoxyacetic acid) from various water samples. The sorbent was successfully synthesized and subsequently characterized by scanning electron microscopy, X‐ray diffraction, and Fourier‐transform infrared spectroscopy. The analytes were extracted by the sorbent mainly through ionic interactions. Once the extraction of analytes was completed, they were desorbed from the sorbent and detected by high‐performance liquid chromatography with ultraviolet detection. A number of factors affecting the extraction and desorption of the analytes were investigated in detail and the optimum conditions were established. Under the optimum conditions, the calibration curves were linear over the concentration range of 1–250, and based on a signal‐to‐noise ratio of 3, the method detection limits were determined to be 0.5 μg/L for both analytes. Additionally, a preconcentration factor of 314 was achieved for the analytes. The average relative recoveries obtained from the fortified water samples varied in the range of 91–108% with relative standard deviations of 2.9–8.3%. Finally, the method was determined to be robust and effective for environmental water analysis.     

Development and validation of a reversed‐phase high‐performance liquid chromatographic method with solid‐phase extraction for the quantification of hydrochlorothiazide in ex vivo permeation studies

Hydrochlorothiazide (HCT) is a diuretic used to treat hypertension. In order to study its intestinal permeation behavior applying an ex vivo methodology, a rapid, sensitive and selective reversed‐phase liquid chromatography (RP‐HPLC) method coupled with UV detection (RP‐HPLC UV) was developed for the analysis of HCT in TC199 culture medium used as mucosal and serosal solutions in the everted rat intestinal sac model. Also, analytical procedures for the quantification of HCT by RP‐HPLC with UV detection required a sample preparation step by solid‐phase extraction. The method was validated in the concentration range of 8.05 × 10⁻⁷ to 3.22 × 10⁻⁵ m for HCT. Chromatographic parameters, namely carry‐over, lower limit of quantification (1.4491 × 10⁻⁷ m ), limit of detection (3.8325 × 10⁻⁸ m ), selectivity, inter‐ and intraday precision and extraction recovery, were determined and found to be adequate for the intended purposes. The validated method was successfully used for permeability assays across rat intestinal epithelium applying the ex vivo everted rat gut sac methodology to study the permeation behavior of HCT.     

Resorcinol–formaldehyde xerogel as a micro‐solid‐phase extraction sorbent for the determination of herbicides in aquatic environmental samples

In this study, organic aerogels were synthesized by the sol–gel polycondensation of mixed cresol with formaldehyde in a slightly basic aqueous solution. Carbon aerogels and xerogels are generated by pyrolysis of organic aerogels. The novel sol–gel‐based micro‐solid‐phase extraction sorbent, resorcinol–formaldehyde xerogel, was employed for preconcentration of some selected herbicides. Three herbicides of the aryloxyphenoxypropionate group, clodinafop‐propargyl, haloxyfop‐etotyl, and fenoxaprop‐P‐ethyl, were extracted from aqueous samples by micro‐solid‐phase extraction and subsequently determined by gas chromatography with mass spectrometry. The effect of different parameters influencing the extraction efficiency of these herbicides including sample flow rate, sample volume, and extraction time were investigated and optimized. Under optimum conditions, linear calibration curves in the range of 0.10–500 ng/L with R² > 0.99 were obtained. The relative standard deviation at 50 μg/L concentration level was lower than 10% (n = 5) and detection limits were between 0.05 and 0.20 μg/L. The proposed method was successfully applied to the sampling and extraction of herbicides from Zayanderood and paddy water samples.