Long‐chain branched ROMP polymers

This article describes the construction of branched ROMP‐polymer architectures via polycondensation of AB_n‐type macromonomers. For this convergent strategy, a polymer was synthesized that carries several hydroxyl‐groups along the polymer chain and one carboxylic acid group at the chain end. An esterification reaction between these functional groups yielded long‐chain branched polymers. The polymers were analyzed by NMR and SEC to monitor the condensation reaction. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Designing Branched Deoxybenzoin Polyesters as Polymeric Flame Retardants

AB₂ monomers present opportunities to conduct one‐pot syntheses of highly branched or “hyperbranched” polymers, which are known for their distinct physical and chemical properties relative to linear polymers. This paper describes the synthesis of a deoxybenzoin‐containing AB₂ monomer and its use in step‐growth polymerization to prepare branched aromatic polyesters. Highly soluble deoxybenzoin polymers were obtained with degrees of branching reaching 0.36 and estimated molecular weights approaching 20 kDa. The phenolic chain ends of the polymer allowed for post‐polymerization modification by silylation and esterification chemistry. TGA and microscale combustion calorimetry revealed these novel aromatic polyesters to possess the critically important characteristics of flame‐retardant polymers, such as high char yield and low heat release. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1765–1770     

Unimolecular micelles and reverse micelles based on hyperbranched polyethers—Comparative study of AB2 + A‐R and A2 + B3 + A‐R type strategies

Core‐shell type hyperbranched polymers that are capable of forming unimolecular micelles and reverse micelles in aqueous and hydrocarbon medium, respectively, were synthesized via two approaches, namely AB₂ + A‐R and A₂ + B₃ + A‐R type copolymerizations. In case of micelle‐forming polymers, an AB₂ monomer carrying a decamethylene spacer was used along with heptaethylene glycol monomethyl ether (HPEG) as the A‐R type comonomer. One the other hand, for the preparation of reverse micelle‐forming polymers, an AB₂ monomer containing an oligo(oxyethylene) spacer was used along with cetyl alcohol as the A‐R type comonomer. The former was readily soluble in water while the latter was soluble in hydrocarbon solvents like hexane. NMR spectral studies confirmed that both the approaches generated highly branched structures wherein about 65–70% of the terminal B groups were capped by the A‐R comonomer. Dye‐uptake measurements revealed that the polymers prepared via the AB₂ + A‐R approach exhibited a significantly larger uptake compared with those prepared via the A₂ + B₃ + A‐R approach. This suggests that the AB₂ + A‐R approach generates hyperbranched polymers with better defined core‐shell topology when compared with polymers prepared via the A₂ + B₃ + A‐R approach, which is in accordance with previous studies that suggest that A₂ + B₃ approach yields polymers with significantly lower branching levels and consequently less compact structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 80–91, 2009     

Synthesis of end‐functionalized poly(methyl methacrylate) by ruthenium‐catalyzed living radical polymerization with functionalized initiators

A series of functionalized 2‐bromoisobutyrates and 2‐chloro‐2‐phenylacetates led to α‐end‐functionalized poly(methyl methacrylate)s in Ru(II)‐catalyzed living radical polymerization; the terminal functions included amine, hydroxyl, and amide. These initiators were effective in the presence of additives such as Al(Oi‐Pr)₃ and n‐Bu₃N. The chlorophenylacetate initiators especially coupled with the amine additive gave polymers with well‐controlled molecular weights (M_w/M_n = 1.2–1.3) and high end functionality (F_n ～ 1.0). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1937–1944, 2002     

Synthesis and properties of long‐chain branched poly(ether sulfone)s by self‐polycondensation of AB2 type macromonomers

Long‐chain branched poly(ether sulfone)s (PESs) were synthesized via self‐polycondensation of AB₂ macromonomers. The linear PES oligomers synthesized by self‐polycondensation of 4‐chloro‐4′‐(4‐hydroxyphenyloxy)diphenyl sulfone were terminated with 4‐(3,5‐methoxyphenoxy)‐4′‐fluorodiphenyl sulfone to form AB₂ macromonomer precursors. After conversion from methoxy to hydroxy groups, the AB₂ macromonomers were self‐polycondensed to form long‐chain branched PESs. NMR measurements support the formation of the target macromonomers ( = 2930–67,800 (g mol^?1); M_n = number average molecular weight) and long‐chain branched PESs. Gel permeation chromatography with multiangle light scattering measurements indicated the formation of high‐molecular‐weight (M_w) polymers over 10⁴. The root‐mean‐square radius of gyration (R_g) suggests that the shape of the long‐chain branched PES synthesized from small AB₂ macromonomers in solution is similar to that of hyperbranched polymers. Increasing resulted in larger R_g, suggesting a transition from hyperbranched to a linear‐like architecture in the resulting long‐chain branched PESs. Rheological measurements suggested the presence of strongly entangled chains in the long‐chain branched PES. Higher tensile modulus and smaller elongation at the break were observed in the tensile tests of the long‐chain branched PESs. It is assumed that the enhanced molecular entanglement points may act as physical crosslinks at room temperature. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1825–1831     

Combination of nitroxide‐mediated polymerization and SET‐LRP for the synthesis of high molar mass branched and star‐branched poly(n‐butyl acrylate) characterized by size exclusion chromatography and rheology

Branched and star‐branched polymers were successfully synthesized by the combination of two successive controlled radical polymerization methods. A series of linear and star poly(n‐butyl acrylate)‐co‐poly(2‐(2‐bromoisobutyryloxy) ethyl acrylate) statistical copolymers, P(nBA‐co‐BIEA)_x, were first synthesized by nitroxide‐mediated polymerization (NMP at T > 100 °C). The subsequent polymerization of n‐butyl acrylate by single electron transfer‐living radical polymerization (SET‐LRP at T = 25 °C), initiated from the brominated sites of the P(nBA‐co‐BIEA)_x copolymer, produced branched or star‐branched poly(n‐butyl acrylate) (PnBA). Both types of polymerizations (NMP and SET‐LRP) exhibited features of a controlled polymerization with linear evolutions of logarithmic conversion versus time and number‐average molar masses versus conversion for final M_n superior to 80,000 g mol^?1. The branched and star‐branched architectures with high molar mass and low number of branches were fully characterized by size exclusion chromatography. The Mark–Houwink Sakurada relationship and the analysis of the contraction factor (g′ = ([η]_branched/[η]_linear)_M) confirmed the elaboration of complex PnBA. The zero‐shear viscosities of the linear, star‐shaped, branched, and star‐branched polymers were compared. The modeling of the rheological properties confirmed the synthesis of the branched architectures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Amphiphilic silicones prepared from branched PEO‐silanes with siloxane tethers

Amphiphilic silicones were prepared by the covalent incorporation of branched polyethylene oxide (PEO) via a siloxane tether. This was achieved by using six novel branched PEO‐silanes with varying siloxane tether lengths and PEO molecular weight (M_n). Each PEO‐silane was crosslinked via acid‐catalyzed sol–gel condensation with α,ω‐bis(Si‐OH)polydimethylsiloxane (PDMS) (M_n = 3000 g/mol) to yield six amphiphilic silicone films. Film surface hydrophilicity increased with siloxane tether length, particularly after exposure to an aqueous environment, indicating that the PEO segments were more readily driven to the surface. This effect was more pronounced for films prepared with PEO‐silanes containing lower M_n PEO segments. AFM was used to study surface reconstruction of films upon exposure to an aqueous environment. Adsorption of bovine serum albumin (BSA) and human fibrinogen (HF) proteins decreased with siloxane tether length, particularly after first exposing films to an aqueous environment. For a given siloxane tether length, relatively less BSA adsorbed onto films prepared with PEO‐silanes with lower M_n PEO segments whereas less HF adsorbed onto films prepared with PEO‐silanes with higher M_n PEO segments. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4108–4119, 2010     

Pendant structure governed anion sensing property for sulfonamide‐functionalized poly(phenylacetylene)s bearing various α‐amino acids

The colorimetric detection of anionic species has been studied for α‐amino acid‐conjugated poly(phenylacetylene)s, which were prepared by the polymerization of the ethyl esters of N‐(4‐ethynylphenylsulfonyl)‐L ‐alanine, L ‐isoleucine, L ‐valine, L ‐phenylalanine, L ‐aspartic acid, and L ‐glutamic acid using Rh⁺(2,5‐norbornadiene)[(η⁶‐C₆H₅)B^?(C₆H₅)₃] as the catalyst in CHCl₃. The one‐handed helical conformations of all the sulfonamide‐functionalized polymers were characterized by Cotton effects in the circular dichroism spectra. The addition of anions with a relatively high basicity, such as tetra‐n‐butylammonium acetate and fluoride, induced drastic changes in both the optical and chiroptical properties. On the other hand, anions with a relatively low basicity, such as tetra‐n‐butylammonium nitrate, azide, and bromide, had essentially no effects on the helical conformation of all the sulfonamide‐functionalized polymers. The anion signaling property of the sulfonamide‐functionalized polymers possessing α‐amino acid moieties was significantly affected by the installed residual amino acid structures. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1683–1689, 2010     

Fluoride‐terminated hyperbranched poly(arylene ether phosphine oxide)s via nucleophilic aromatic substitution

A series of AB_x‐type triarylphosphine oxide monomers, bis‐(4‐fluorophenyl)‐(4‐hydroxyphenyl)phosphine oxide ( 4a ), bis‐(3,4‐difluorophenyl)‐(4‐hydroxyphenyl)phosphine oxide ( 4b ), and 4‐hydroxyphenyl‐bis‐(3,4,5‐trifluorophenyl)phosphine oxide ( 4c ) were prepared, characterized, and polymerized under nucleophilic aromatic substitution conditions [N‐methylpyrrolidone (NMP), K₂CO₃] to provide the corresponding hyperbranched poly(arylene ether phosphine oxide)s with number‐average molecular weights ranging from 9200 to 14,600 Da. NMR spectroscopic analysis indicated the presence of highly branched products with an approximate degree of branching of 0.57. The polymers were soluble in a variety of typical organic solvents and displayed excellent thermal stability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1456–1467, 2002     

Synthesis of well‐defined AB20‐type star polymers with cyclodextrin‐core by combination of NMP and ATRP

The synthesis of an AB₂₀‐type heteroarm star polymer consisting of a polystyrene arm and 20‐arms of poly(methyl methacrylate) or poly(tert‐butyl acrylate) was carried out using the combination of nitroxide‐mediated polymerization (NMP) and atom transfer radical polymerization (ATRP). The NMP of styrene was carried out using mono‐6‐[4‐(1′‐(2″,2″,6″,6″‐tetramethyl‐1″‐piperidinyloxy)‐ethyl)benzamido]‐β‐cyclodextrin peracetate ( 1 ) to afford end‐functionalized polystyrene with an acetylated β‐cyclodextrin (β‐CyD) unit (prepolymer 2 ) with a number‐average molecular weight (M_n) of 11700 and a polydispersity (M_w/M_n) of 1.17. After deacetylation of prepolymer 2 , the resulting polymer was reacted with 2‐bromoisobutyric anhydride to give end‐functionalized polystyrene with 20(2‐bromoisobutyrol)s β‐CyD, macroinitiator 4 . The copper (I)‐mediated ATRP of methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) was carried out using macroinitiator 4 . The resulting polymers were isolated by SEC fractionation to produce AB₂₀‐type star polymers with a β‐CyD‐core, 5 . The well‐defined structure of 5 with weight‐average molecular weight (M_w)s of 13,500–65,300 and M_w/M_n's of 1.26–1.28 was demonstrated by SEC and light scattering measurements. The arm polymers were separated from 5 by destruction with 28 wt % sodium methoxide in order to analyze the details of their characteristic structure. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4271–4279, 2005     

Star poly(methyl methacrylate) with end‐functionalized arm chains by ruthenium‐catalyzed living radical polymerization

Star polymers with end‐functionalized arm chains (surface‐functionalized star polymers) were synthesized by the in situ linking reaction between ethylene glycol dimethacrylate (linking agent) and an α‐end‐functionalized linear living poly(methyl methacrylate) in RuCl₂(PPh₃)₃‐catalyzed living radical polymerization; the terminal on the surface functionalities included amides, alcohols, amines, and esters. The star polymers were obtained in high yields (75–90%) with initiating systems consisting of a functionalized 2‐chloro‐2‐phenylacetate or ‐acetamide [F? C(O)CHPhCl; F = nPrNH? , HOCH₂CH₂O? , Me₂NCH₂CH₂O? , or EtO? ; initiator] and n‐Bu₃N (additive). The yield was lower with a functionalized 2‐bromoisobutyrate [Me₂NCH₂CH₂OC(O)CMe₂Br] initiator or with Al(Oi‐Pr)₃ as an additive. Multi‐angle laser light scattering analysis showed that the star polymers had arm numbers of 10–100, radii of gyration of 6–23 nm, and weight‐average molecular weights of 1.3 × 10⁵ to 3.0 × 10⁶, which could be controlled by the molar ratio of the linking agent to the linear living polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1972–1982, 2002     

Synthesis and characterization of N‐substituted hyperbranched polyureas

N,N′‐disubstituted hyperbranched polyureas with methyl, benzyl, and allyl substitutents were synthesized starting from AB₂ monomers based on 3,5‐diamino benzoic acid. Carbonyl azide approach, which generates isocyanate group in situ on thermal decomposition, was used for the protection of isocyanate functional groups. The N‐substituted hyperbranched polymers can be considered as the new class of internally functionalized hyperbranched polyureas wherein the substituent can function either as receptor or as a chemical entity for selective transformations as a tool to tailor the properties. The chain‐ends were also modified by attaching long chain aliphatic groups to fully realize the interior functionalization. This approach opens up a possible synthetic route wherein different functional substituents can be used to generate a library of internally functionalized hyperbranched polymers. All the hyperbranched polyureas were characterized by FTIR, ¹H‐NMR, DSC, TGA, and size exclusion chromatography. Degree of branching in these N,N′‐disubstituted hyperbranched polyureas, as calculated by ¹H‐NMR spectroscopy using model compounds, was found to be lower than the unsubstituted hyperbranched polyurea and is attributed to the lower reactivity of N‐substituted amines compared to that of unsubstituted amines. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5134–5145, 2004     

Arborescent polypeptides from γ‐benzyl l‐glutamic acid

The synthesis of arborescent polymers with poly(γ‐benzyl L‐glutamate) (PBG) side chains was achieved through successive grafting reactions. The linear PBG building blocks were produced by the ring‐opening polymerization of γ‐benzyl L‐glutamic acid N‐carboxyanhydride initiated with n‐hexylamine. The polymerization conditions were optimized to minimize the loss of amino chain termini in the reaction. Acidolysis of a fraction of the benzyl groups on a linear PBG substrate and coupling with linear PBG using a carbodiimide/hydroxybenzotriazole promoter system yielded a comb‐branched or generation zero (G0) arborescent PBG. Further partial deprotection and grafting cycles led to arborescent PBG of generations G1 to G3. The solvent used in the coupling reaction had a dramatic influence on the yield of graft polymers of generations G1 and above, dimethylsulfoxide being preferable to N,N‐dimethylformamide. This grafting onto scheme yielded well‐defined (M_w/M_n ≤ 1.06), high molecular weight arborescent PBG in a few reaction cycles, with number‐average molecular weights and branching functionalities reaching over 10⁶ and 290, respectively, for the G3 polymer. α‐Helix to coiled conformation transitions were observed from N,N‐dimethylformamide to dimethyl sulfoxide solutions, even for the highly branched polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5270–5279     

Facile synthesis and characterization of hyperbranched poly(ether amide)s generated from Michael addition polymerization of in situ created AB2 monomers

A new straightforward strategy for synthesis of novel hyperbranched poly (ether amide)s from readily available monomers has been developed. By optimizing the reaction conditions, the AB₂‐type monomers were formed dominantly during the initial reaction stage. Without any purification, the AB₂ intermediate was subjected to further polymerization in the presence (or absence) of an initiator, to prepare the hyperbranched polymer‐bearing multihydroxyl end‐groups. The influence of monomer, initiator, and solvent on polymerization and the molecular weight (MW) of the resultant polymers was studied thoroughly. The MALDI–TOF MS of the polymers indicated that the polymerization proceeded in the proposed way. Analyses of ¹H NMR and ¹³C NMR spectra revealed the branched structures of the polymers obtained. These polymers exhibit high‐moderate MWs and broad MW distributions determined by gel permeation chromatography (GPC) in combination with triple detectors, including refractive index, light scattering, and viscosity detectors. In addition, the examination of the solution behavior of these polymers showed that the values of intrinsic viscosity [η] and the Mark–Houwink exponent α were remarkably lower compared with their linear analogs, because of their branched nature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4309–4321, 2007     

Large‐scale synthesis of arborescent polystyrenes

A method was developed for the large (100 g) scale synthesis of arborescent polystyrenes using acetyl coupling sites. Successive generations of dendritic graft polymers were obtained from cycles of polystyrene substrate acetylation with acetyl chloride and coupling in the presence of LiCl with “living” polystyryllithium chains capped with 2‐vinylpyridine units. The grafting yield for the synthesis of a generation zero (G0 or comb‐branched) arborescent polystyrene under the conditions previously reported for the 10 g scale reactions decreased from 95 to 75% when scaled up to 100 g. The lowered yield was linked to side chain dimerization and deactivation of the macroanions. The modified 100 g scale procedure, using end‐capping of the polystyryllithium with 1,1‐diphenylethylene and the addition of 3–6 equivalents per living end of 2‐vinylpyridine as a dilute solution, eliminated side chain dimerization and provided grafting yields of up to 95%. The large‐scale procedure developed was applied to the synthesis of arborescent polystyrenes of generations up to G2 with low polydispersity indices (M_w/M_n ≤ 1.04) and molecular weights increasing in an approximately geometric fashion for each cycle. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5742–5751, 2008     

Metal Microporous Aromatic Polymers with Improved Performance for Small Gas Storage

A novel metal‐doping strategy was developed for the construction of iron‐decorated microporous aromatic polymers with high small‐gas‐uptake capacities. Cost‐effective ferrocene‐functionalized microporous aromatic polymers (FMAPs) were constructed by a one‐step Friedel–Crafts reaction of ferrocene and s‐triazine monomers. The introduction of ferrocene endows the microporous polymers with a regular and homogenous dispersion of iron, which avoids the slow reunion that is usually encountered in previously reported metal‐doping procedures, permitting a strong interaction between the porous solid and guest gases. Compared to ferrocene‐free analogues, FMAP‐1, which has a moderate BET surface area, shows good gas‐adsorption capabilities for H₂ (1.75 wt % at 77 K/1.0 bar), CH₄ (5.5 wt % at 298 K/25.0 bar), and CO₂ (16.9 wt % at 273 K/1.0 bar), as well as a remarkably high ideal adsorbed solution theory CO₂/N₂ selectivity (107 v/v at 273 K/(0–1.0) bar), and high isosteric heats of adsorption of H₂ (16.9 kJ mol^?1) and CO₂ (41.6 kJ mol^?1).     

Multiarm star polymers with peripheral dendritic PMMA arms through Diels–Alder click reaction

Dendritic 2‐ and 4‐arm PMMA‐based star polymers with furan‐protected maleimide at their focal point, (PMMA)_2n‐MI and (PMMA)_4n‐MI were efficiently clicked with the peripheral anthracene functionalized multiarm star polymer, (α‐anthryl functionalized‐polystyrene)_m‐poly(divinyl benzene) ((α‐anthryl‐PS)_m‐polyDVB) through the Diels–Alder reaction resulting in corresponding multiarm star block copolymers: (PMMA)_2n‐(PS)_m‐polyDVB and (PMMA)_4n‐(PS)_m‐polyDVB, respectively. Molecular weights (M_w,TDGPC), hydrodynamic radius (R_h), and intrinsic viscosity (η) of the multiarm star polymers were determined using three‐detection GPC (TD‐GPC). The high efficiency of this methodology to obtain such sterically demanding macromolecular constructs was deduced using ¹H‐NMR and UV–vis spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Toward low‐band gap dithienophosphole copolymers for an application in organic solar cells

Two functionalized dithieno[3,2‐b:2′,3′‐d]phospholes with solubilizing groups have been synthesized that allow for the generation of a series of π‐conjugated AB‐ and ABC‐copolymers. The polymers obtained show notable optoelectronic properties with red‐shifted absorption and emission in the orange to red section of the optical solar spectrum. Although combination of dithienophosphole units with fluorene building blocks gives access to processable polymers with band gaps between 2.2 and 2.3 eV in solution and 2.0 eV in the solid state, an ABC copolymer based on dithienophosphole, fluorene, and bis(thienyl)benzothiadiazole units was found to not only exhibit a suitable band gap for solar cell applications (solution: 2.0 eV; solid state: 1.7 eV) but also showed good solubility as well as good electron transfer properties in the presence of fullerene (C₆₀). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8179–8190, 2008     

Synthesis and characterization of fluorene‐based oligomers and polymers incorporating N‐arylphenothiazine‐S,S‐dioxide units

A series of 3,7‐bis(9,9‐di‐n‐hexylfluoren‐2‐yl)‐N‐arylphenothiazine‐S,S‐dioxide trimers and (9,9‐di‐n‐octylfluorene‐2,7‐diyl‐co‐N‐arylphenothiazine‐S,S‐dioxide) co‐polymers, with varying ratios of phenothiazine‐S,S‐dioxide units, have been prepared in good yields by palladium‐catalyzed cross‐coupling reactions. The materials are deep blue emitters and show no solvatochromism or evidence for an intramolecular charge‐transfer state. The photoluminescence quantum yields of the trimers are ?_PL 15–30% in solution and 14–25% in films. The polymers demonstrated very high values in solution (?_PL 74–84%) and ?_PL values in films of 28–47%. The estimated HOMO energy levels are between ?5.64 and ?5.62 eV for the polymers with 15% incorporation of the phenothiazine‐S,S‐dioxide units. An analogous N‐arylphenothiazine co‐polymer shows significantly red shifted absorption and emission. Solution electrochemical data and density functional theory calculations are also presented. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of arborescent styrene homopolymers and copolymers from epoxidized substrates

The synthesis of arborescent styrenic homopolymers and copolymers was achieved by anionic polymerization and grafting. Styrene and p‐(3‐butenyl)styrene were first copolymerized using sec‐butyllithium in toluene, to generate a linear copolymer with a weight‐average molecular weight M_w = 4000 and M_w/M_n = 1.05. The pendant double bonds of the copolymer were then epoxidized with m‐chloroperbenzoic acid. A comb‐branched (or arborescent generation G0) copolymer was obtained by coupling the epoxidized substrate with living styrene‐p‐(3‐butenyl)styrene copolymer chains with M_w ≈ 5000 in a toluene/tetrahydrofuran mixture. Further cycles of epoxidation and coupling reactions while maintaining M_w ≈ 5000 for the side chains yielded arborescent copolymers of generations G1–G3. A series of arborescent styrene homopolymers was also obtained by grafting M_w ≈ 5000 polystyrene side chains onto the linear and G0–G2 copolymer substrates. Size exclusion chromatography measurements showed that the graft polymers have low polydispersity indices (M_w/M_n = 1.02–1.15) and molecular weights increasing geometrically over successive generations. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012