PEG‐b‐PtBA‐b‐PHEMA well‐defined amphiphilic triblock copolymer: Synthesis,self‐assembly,and application in drug delivery

A series of well‐defined amphiphilic triblock copolymers, poly(ethylene glycol)‐b‐poly(tert‐butyl acrylate)‐b‐poly(2‐hydroxyethyl methacrylate) (PEG‐b‐PtBA‐b‐PHEMA), were synthesized via successive atom transfer radical polymerization (ATRP). ATRP of tBA was first initiated by PEG‐Br macroinitiator using CuBr/N,N,N′,N″,N′″‐pentamethyldiethylenetriamine as catalytic system to give PEG‐b‐PtBA diblock copolymer. This copolymer was then used as macroinitiator to initiate ATRP of HEMA, which afforded the target triblock copolymer, PEG‐b‐PtBA‐b‐PHEMA. The critical micelle concentrations of obtained amphiphilic triblock copolymers were determined by fluorescence spectroscopy using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of formed aggregates were investigated by transmission electron microscopy and dynamic light scattering, respectively. Finally, an acid‐sensitive PEG‐b‐PtBA‐b‐P(HEMA‐CAD) prodrug via cis‐aconityl linkage between doxorubicin and hydroxyls of triblock copolymers with a high drug loading content up to 38%, was prepared to preliminarily explore the application of triblock copolymer in drug delivery. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Suppressing the long‐chain branching in the synthesis of poly(styrene‐b‐butyl acrylate‐b‐styrene) in RAFT emulsion polymerization by tuning the interfacial properties

Reversible addition‐fragmentation chain transfer (RAFT) emulsion polymerization is becoming an important technique to synthesize the latex of block copolymers. A previous study showed that in the synthesis of polystyrene‐b‐poly(butyl acrylate)‐b‐polystyrene triblock copolymer via RAFT emulsion polymerization using amphiphilic oligo(acrylic acid‐styrene) macroRAFT as surfactant and mediator, the molecular weight distribution could be much broadened to PDI higher than 2. In this study, an in‐depth investigation was performed to decrease PDI. It was found that long‐chain branches could be formed in the synthesis of triblock block copolymer, leading to the appearance of a higher molecular weight shoulder in the GPC curve of the final product. The lower neutralization degree of acrylic acid (AA) units on the macroRAFT and shorter AA chains would help to suppress the formation the long‐chain branches, leading to PDI around 1.5. It is evidenced that the successful suppression is due to the promotion of radical entry as a result of decreased interfacial transport impedance. It is also evidenced that the presence of styrene during the polymerization of butyl acrylate could promote the formation of long chain branches. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1464–1473     

Synthesis of tertiary amine‐based pH‐responsive polymers by RAFT Polymerization

Well‐defined tertiary amine‐based pH‐responsive homopolymers and block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization using 4‐cyanopentanoic acid dithiobenzoate (CPAD) as the RAFT agent for homopolymers and a poly(ethylene glycol) (PEG) macro‐RAFT agent for the block copolymers. ¹H NMR and gel permeation chromatography results confirmed the successful synthesis of these homopolymers and block copolymers. Kinetics studies indicated that the formation of both the homopolymers and the block copolymers were well defined. The pKa titration experiments suggested that the homopolymers and the related block copolymers have a similar pKa. The dynamic light scattering investigation showed that all of the block copolymers underwent a sharp transition from unimers to micelles around their pKa and the hydrodynamic diameter (D_h) was not only dependent on the molecular weight but also on the composition of the block copolymers. The polymer solution of PEG‐b‐PPPDEMA formed the largest micelle compare to the PEG‐b‐PDPAEMA and PEG‐b‐PDBAEMA with a similar molecular weight. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1010–1022     

RAFT‐mediated emulsion polymerization of styrene using brush copolymer as surfactant macro‐RAFT agent: Effect of the brush copolymer sequence and chemical composition

The nonionic amphiphilic brush polymers such as poly[poly(ethylene oxide) methyl ether vinylphenyl‐co‐styrene] trithiocarbonate [P(mPEGV‐co‐St)‐TTC] and poly[poly(ethylene oxide) methyl ether vinylphenyl‐b‐styrene‐b‐poly(ethylene oxide) methyl ether vinylphenyl] trithiocarbonate [P(mPEGV‐b‐St‐b‐mPEGV)‐TTC] with different monomer sequence and chemical composition are synthesized and their application as macro‐RAFT agent in the emulsion RAFT polymerization of styrene is explored. It is found that the monomer sequence in the brush polymers exerts great influence on the emulsion RAFT polymerization kinetics, and the fast polymerization with short induction period in the presence of P(mPEGV‐co‐St)‐TTC is demonstrated. Besides, the chemical composition in the brush polymer macro‐RAFT agent effect on the emulsion RAFT polymerization is investigated, and the macro‐RAFT agent with high percent of the hydrophobic PS segment leads to fast and well controlled polymerization. The growth of triblock copolymer colloids in the emulsion polymerization is checked, and it reveals that the colloidal morphology is ascribed to the hydrophobic PS block extension, and the P(mPEGV‐co‐St) block almost have no influence just on the size of the colloids. This may be the first example to study the monomer sequence and the chemical composition in the macro‐RAFT agent on emulsion RAFT polymerization, and will be useful to reveal the block copolymer particle growth. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Thermogelling behaviors of poly(caprolactone‐b‐ethylene glycol‐b‐caprolactone) triblock copolymer in the presence of hyaluronic acid

In this article, we studied the effect of hyaluronic acid (HA) on thermogelation of poly(caprolactone‐b‐ethylene glycol‐b‐caprolactone) (PCL‐PEG‐PCL) aqueous solution designed as an injectable system for prevention of postsurgical tissue adhesion. The PCL‐PEG‐PCL triblock copolymers were simply synthesized by ring‐opening polymerization of ε‐caprolactone (CL) in the presence of PEG as a polymeric initiator. The synthesized copolymers were confirmed by proton nuclear magnetic resonance (¹H‐NMR) spectroscopy. Possible interactions between HA and PCL‐PEG‐PCL triblock copolymers in the blend were evaluated by Fourier‐transform infrared spectroscopy (FTIR). The effect of HA on the micellization of PCL‐PEG‐PCL aqueous solution was investigated by dye solubilization method and electrophoretic lighting scattering (ELS) spectrophotometer. Also, the thermogelling behaviors of the PCL‐PEG‐PCL triblock copolymers in the presence of HA and their mechanism were investigated by test tube inverting method, ¹³C‐NMR, ¹H‐NMR, Advanced Rheometic Expansion System (ARES), and differential scanning calorimetry (DSC). The PCL‐PEG‐PCL/HA blend aqueous solutions undergo the sol‐gel‐sol transition in response to an increase in temperature (10–60 °C) and the gelation of the PCL‐PEG‐PCL was rather accelerated by HA. Presumably, this accelerated gelation seems to arise from the attractive interactions between them and the effect of chain confinement in the micelle corona region. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3629–3637, 2008     

Synthesis and properties of monocleavable amphiphilic comblike copolymers with alternating PEG and PCL grafts

Symmetric reduction‐responsive amphiphilic comblike copolymers mid‐disulfide‐functionalized comblike copolymers with alternating copolymer comprised of styrenic unit and N‐(2‐hydroxyethyl) maleimide (HEMI) unit (poly(St‐alt‐HEMI)) backbones and alternating PEG and PCL side chains (S‐CP(PEG‐alt‐PCL)) with poly(St‐alt‐HEMI) backbones and alternating poly(ε‐caprolactone) (PCL) and poly(ethylene glycol) (PEG) side chains were synthesized and used as nanocarriers for in vitro release of doxorubicin. The target copolymers with predetermined molecular weight and narrow molecular weight distribution (M_w/M_n = 1.15–1.20) were synthesized by reversible addition‐fragmentation chain transfer (RAFT) copolymerization of vinylbenzyl‐terminated PEG and N‐(2‐hydroxyethyl) maleimide mediated by a disulfide‐functionalized RAFT agent S‐CPDB, and followed by ring‐opening polymerization of ε‐caprolactone. When compared with linear block copolymer comprised of poly(ethylene glycol) (PEG) and poly(?‐caprolactone) (PCL) segments (PEG‐b‐PCL) copolymers, comblike copolymers with similar PCL contents usually exhibited decreased crystallization temperature, melting temperature, and degree of crystallinity, indicating the significant influence of copolymer architecture on physicochemical properties. Dynamic light scattering measurements revealed that comblike copolymers were liable to self‐assemble into aggregates involving vesicles and micelles with average diameter in the range of 56–226 nm and particle size distribution ranging between 0.07 and 0.20. In contrast to linear copolymer aggregates, comblike copolymer aggregates with similar compositions were of improved storage stability and enhanced drug‐loading efficiency. In vitro drug release confirmed the disulfide‐linked comblike copolymer aggregates could rapidly release the encapsulated drug when triggered by 10 mM DL ‐dithiothreitol. These reduction‐sensitive, biocompatible, and biodegradable aggregates have a potential as controlled delivery vehicles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Interfacial crosslinking of self‐assembled triblock copolymer nanoparticles via alkoxysilane hydrolysis and condensation

The use of amphiphilic triblock copolymers bearing a reactive alkoxysilane middle block as polymeric stabilizers is reported in this work. A series of poly(ethylene glycol) methyl ether methacrylate‐b‐(3‐trimethoxysilyl)propyl methacrylate‐b‐benzyl methacrylate (PEGMA‐b‐MPS‐b‐BzMA) triblock copolymers were prepared by RAFT solution polymerization and polymerization‐induced self‐assembly (PISA), respectively, where the various block lengths and overall composition were varied. The copolymers prepared by solution polymerization were employed as oil‐in‐water stabilizers where upon application of a catalyst, the 3‐(trimethoxysilyl)propyl methacrylate (MPS) block at the droplet interface was crosslinked to yield capsule‐like structures. The effectiveness of interfacial crosslinking was validated by dynamic light scattering and electron microscopy. In situ self‐assembly by the PISA method resulted in spherical nanoparticles of controllable size that were readily crosslinked by addition of base, with significant enhancement of colloidal stability. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1897–1907     

RAFT synthesis of an amphiphilic block copolymer bearing chlorin rings in the hydrophobic segment and its application in photodynamic therapy

RAFT polymerization of styrene (St) in the presence of 5,10,15,20‐tetrakis(pentafluorophenyl)porphyrin (TFPP) was conducted using 4‐cyano‐4‐(thiobenzoyl)thiopentanoic acid as a chain‐transfer agent and azobisisobutyronitrile as an initiator at 60 °C. The resulting polymer exhibited a chlorin‐like UV‐vis spectrum, which indicated that the polymer possessed a reduced TFPP structure. Furthermore, an SEC trace recorded using UV‐vis detector (λ = 410 nm), which selectively detected the TFPP‐incorporated polymer, shifted toward higher molecular mass as the polymerization progressed. This evidence indicated that TFPP acted as a vinylene‐type monomer, such as maleimide, to form a copolymer, namely, poly(St‐co‐TFPP). The mole fraction of TFPP units was estimated to be 0.74 × 10^?3, which was close to that in the feed (1 × 10^?3). Chain extension of poly(St‐co‐TFPP) with polyethylene glycol monomethyl ether acrylate (PEGA) was performed to afford the amphiphilic block copolymer poly(St‐co‐TFPP)‐b‐poly(PEGA). The degrees of polymerization of St and PEGA were determined to be 64 and 75, respectively. Poly(St‐co‐TFPP)‐b‐poly(PEGA) formed micelles following dialysis. The median diameter of the micelles in solution was determined to be 16 nm by DLS. The photocytotoxicity of the micelle solution was evaluated in a human glioblastoma cell line (U251) and an N‐methyl‐N'‐nitro‐N‐nitrosoguanidine‐induced mutant of a rat murine RGM‐1 gastric carcinoma mucosal cell line (RGK‐1). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3395–3403     

ABA-type amphiphilic triblock copolymers containing p-ethoxy azobenzene via atom transfer radical polymerization: Synthesis,characterization, and properties

ABA-type amphiphilic triblock copolymers composed of poly(ethylene glycol)s (PEGs) with different number-average molecular weights as the hydrophilic blocks (B) and poly{6-[4-(4-ethoxyphenylazo)phenoxy]hexyl methacrylate} (PA6C) as the hydrophobic blocks (A) were prepared via atom transfer radical polymerization. These copolymers were prepared from bromo-terminated macroinitiators based on PEG6000, PEG2000, and PEG600, with CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine as the catalytic system, at 85 °C in anisole. The block copolymers were characterized with ¹H NMR spectroscopy and gel permeation chromatography. Differential scanning calorimetry measurements were performed to reveal the phase segregation. In contrast to those polymers with similar compositions and structures in previous reports, these amphiphilic copolymers exhibited unusual liquid-crystalline properties over a wide temperature range, being stable even at room temperature. These copolymers showed photoresponsive isomerization under the irradiation of UV–vis light both in THF solutions and in solid films. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2225–2234, 2007     

Thermo‐ and pH‐induced self‐assembly of P(AA‐b‐NIPAAm‐b‐AA) triblock copolymers synthesized via RAFT polymerization

A series of environmentally sensitive ABA triblock copolymers with different block lengths were prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization from acrylic acid (AA) and N‐isopropylacrylamide (NIPAAm). The GPC and ¹H NMR analyses demonstrated the narrow molecular weight distribution and precise chemical structure of the prepared P(AA‐b‐NIPAAm‐b‐AA) triblock copolymers owing to the controlled/living characteristics of RAFT polymerization. The lower critical solution temperature (LCST) of the triblock copolymers could be tailored by adjusting the length of PAA block and controlled by the pH value. Under heating, the triblock copolymers underwent self‐assemble in dilute aqueous solution and formed nanoparticles revealed via TEM images. Physically crosslinked nanogels induced by inter‐/intra‐hydrogen bonding or core‐shell micelle particles thus could be obtained by changing environmental conditions. With a well‐defined structure and stimuli‐responsive properties, the P(AA‐b‐NIPAAm‐b‐AA) copolymer is expected to be employed as a nanocarrier for biomedical applications in controlled‐drug delivery and targeting therapy. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1109–1118     

Novel amphiphilic triblocks fitted with photocrosslinkable termini,and their photocrosslinking to conetworks

Two new telechelic amphiphilic triblock copolymers, HE₃‐PEG‐b‐PDMS‐b‐PEG‐HE₃ and HE₃‐PEG‐b‐PDMS‐b‐PEG‐HE₃, i.e., sequence‐reversed triblocks of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic polydimethylsiloxane (PDMS) segments fitted with photocrosslinkable tri[2‐(3,4‐cyclohexane oxide)ethyl‐dimethylsiloxy]silane (HE₃) termini, were synthesized, characterized, photocrosslinked to amphiphilic conetworks (APCNs), and the properties of the APCNs were analyzed. APCNs in which the crosslinking sites are located in the hydrophobic domains exhibited significantly better mechanical properties than those in which the crosslinks were in the hydrophilic domains. The stiff domains formed of the UV‐crosslinkable HE₃ chain‐end substituents provide not only crosslinking but reinforcement as well. The crosslinking/reinforcement efficiency was greatly enhanced by the addition of excess HE₃. Water‐swollen APCNs were optically clear and exhibited mechanical properties appropriate for biomedical application. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 174–185, 2008     

Novel perfluorocyclobutyl aryl ether‐based well‐defined amphiphilic block copolymer

A series of fluorine‐containing amphiphilic diblock copolymers comprising hydrophobic poly(p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate) (PTPFCBPMA) and hydrophilic poly(2‐(diethylamino)ethyl methacrylate) (PDEAEMA) segments were synthesized via successive reversible addition fragmentation chain transfer (RAFT) polymerizations. RAFT homopolymerization of p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate was first initiated by 2,2′‐azobisisobutyronitrile using cumyl dithiobenzoate as chain transfer agent, and the results show that the procedure was conducted in a controlled way as confirmed by the fact that the number‐average molecular weights increased linearly with the conversions of the monomer while the polydispersity indices kept below 1.30. Dithiobenzoate‐capped PTPFCHPMA homopolymer was then used as macro‐RAFT agent to mediate RAFT polymerization of 2‐(diethylamino)ethyl methacrylate, which afforded PTPFCBPMA‐b‐PDEAEMA amphiphilic diblock copolymers with different block lengths and narrow molecular weight distributions (M_w/M_n ≤ 1.28). The critical micelle concentrations of the obtained amphiphilic diblock copolymers were determined by fluorescence spectroscopy technique using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of the formed micelles were investigated by transmission electron microscopy and dynamic light scattering, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Encapsulation of nanomaterials using an intermediary layer cross‐linkable ABC triblock copolymer

For the preparation of core‐shell nanoparticles containing functional nanomaterials, a photo‐cross‐linkable amphiphilic ABC triblock copolymer, poly(ethylene glycol)‐b‐poly(2‐cinnamoyloxyethyl methacrylate)‐b‐poly(methyl methacrylate) (PEG‐PCEMA‐PMMA), was synthesized. This triblock copolymer was then used to encapsulate Au nanoparticles or pyrene. The triblock copolymer of PEG‐b‐poly(2‐hydroxyethyl methacrylate)‐b‐PMMA (PEG‐PHEMA‐PMMA) (M_n = 15,800 g/mol, M_w/M_n = 1.58) was first synthesized by activators generated by electron transfer atom transfer radical polymerization. Its middle block was then functionalized with cinnamoyl chloride. The degrees of polymerization of the PEG, PHEMA, and PMMA blocks were 45, 13, and 98, respectively. PMMA‐tethered Au nanoparticles (with an average diameter of 3.0 nm) or pyrene was successfully encapsulated within the PEG‐PCEMA‐PMMA micelles. The intermediary layers of the micelles were then cross‐linked by UV irradiation. The spherical structures of the PEG‐PCEMA‐PMMA micelles containing Au nanoparticles or pyrene were not changed by the photo‐cross‐linking process and they showed excellent colloidal stability. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4963–4970, 2009     

Thermo‐responsive fluorescent micelles from amphiphilic A3B miktoarm star copolymers prepared via a combination of SET‐LRP and RAFT polymerization

A novel amphiphilic A₃B miktoarm star copolymer poly(N‐isopropylacrylamide)₃‐poly(N‐vinylcarbazole) ((PNIPAAM)₃(PVK)) was successfully synthesized by a combination of single‐electron transfer living radical polymerization (SET‐LRP) and reversible addition‐fragmentation chain transfer (RAFT) polymerization. First, the well‐defined three‐armed poly(N‐isopropylacrylamide) (PNIPAAM)₃ was prepared via SET‐LRP of N‐isopropylacrylamide in acetone at 25 °C using a tetrafunctional bromoxanthate iniferter (Xanthate‐Br₃) as the initiator and Cu(0)/PMDETA as a catalyst system. Secondly, the target amphiphilic A₃B miktoarm star copolymer ((PNIPAAM)₃(PVK)) was prepared via RAFT polymerization of N‐vinylcarbazole (NVC) employing (PNIPAAM)₃ as the macro‐RAFT agent. The architecture of the amphiphilic A₃B miktoarm star copolymers were characterized by GPC, ¹H‐NMR spectra. Furthermore, the fluorescence intensity of micelle increased with the temperature and had a good temperature reversibility, which was investigated by dynamic light scattering (DLS), fluorescent and UV‐vis spectra. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4268–4278, 2010     

Thermoresponsive diblock copolymer micellar macro‐RAFT agent‐mediated dispersion RAFT polymerization and synthesis of temperature‐sensitive ABC triblock copolymer nanoparticles

The micellar macro‐RAFT agent‐mediated dispersion polymerization of styrene in the methanol/water mixture is performed and synthesis of temperature‐sensitive ABC triblock copolymer nanoparticles is investigated. The thermoresponsive diblock copolymer of poly(N,N‐dimethylacrylamide)‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] trithiocarbonate forms micelles in the polymerization solvent at the polymerization temperature and, therefore, the dispersion RAFT polymerization undergoes as similarly as seeded dispersion polymerization with accelerated polymerization rate. With the progress of the RAFT polymerization, the molecular weight of the synthesized triblock copolymer of poly(N,N‐dimethylacrylamide)‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine]‐b‐polystyrene linearly increases with the monomer conversion, and the PDI values of the triblock copolymers are below 1.2. The dispersion RAFT polymerization affords the in situ synthesis of the triblock copolymer nanoparticles, and the mean diameter of the triblock copolymer nanoparticles increases with the polymerization degree of the polystyrene block. The triblock copolymer nanoparticles contain a central thermoresponsive poly [N‐(4‐vinylbenzyl)‐N,N‐diethylamine] block, and the soluble‐to‐insoluble ‐‐transition temperature is dependent on the methanol content in the methanol/water mixture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2155–2165     

Facile synthesis and catalytic activity of well‐defined amphiphilic block copolymers based on N‐vinylimidazolium

Well‐defined amphiphilic block copolymers, poly(styrene)‐b‐poly(N‐vinylimidazole) (PS‐b‐PVim), were successfully synthesized by macromolecular design via interchange of the xanthates/reversible addition–fragmentation chain transfer (RAFT) polymerization. The structure of the copolymer based on Vim can be well controlled, and the molecular weight distribution was relatively narrow (PDI = 1.24). The size and morphology of the aggregates of the amphiphilic copolymers were investigated by dynamic light scattering and transmission electron microscope, the results implied that the uniform spheroidal micelles consisting of PS core and PVim corona were assembled, and the catalytic activities of PS‐b‐PVim for the hydrolysis of p‐nitrophenyl acetate at different temperatures were also investigated by high‐performance liquid chromatograph (HPLC); the catalytic activities of diblock copolymers were prominently improved compared with that of PVim homopolymers. Moreover, the catalytic activities of the copolymers followed the Arrhenius behavior in the wide experimental temperature range. Copyright © 2013 John Wiley & Sons, Ltd.     

Fabrication of thermosensitive PCL‐PNIPAAm‐PCL triblock copolymeric micelles for drug delivery

A series of thermosensitive ABA type triblock poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide)‐b‐poly(ε‐caprolactone) (PCL‐PNIPAAm‐PCL) copolymers with different molecular weights were synthesized by the combination of ring opening polymerization and reversible addition‐fragmentation chain transfer (RAFT) polymerization. The critical micelle concentrations (CMCs) of the resulted four triblock copolymers in aqueous solution were determined to be 33.8, 39.8, 35.5, and 41.7 mg/L, respectively, by fluorescence spectroscopy using pyrene as a fluorescence probe. Optical absorption measurements showed that the lower critical solution temperatures (LCSTs) of the copolymers were 35.8, 36.2, 35.2, and 36.2 °C, respectively, in distilled water, and 33.9, 34.2, 33.3, 34.6 °C, respectively, in PBS (pH = 6.8, I = 0.1). Transmission electron microscopy (TEM) showed that the self‐assembled micelles exhibited a well‐defined spherical shape with diameter of around 100 nm. The drug‐loaded PCL‐PNIPAAm‐PCL micelles displayed thermosensitive controlled release behaviors. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3048–3057, 2008     

Synthesis of amphiphilic multiblock and triblock copolymers of polydimethylsiloxane and poly(N,N‐dimethylacrylamide)

The synthesis and spectroscopic characterization of a new family of amphiphilic multiblock and triblock copolymers is described. The synthetic methodology rests on the preparation of telechelic multifunctional and difunctional chain transfer agents easily available in two synthetic steps from commercially available polydimethylsiloxane‐containing starting materials. Telechelic polymers thus synthesized are used as macromolecular chain transfer agents in the reversible addition fragmentation chain transfer (RAFT) polymerization of N,N‐dimethylacrylamide (DMA) enabling the synthesis of (AB)_n‐type multiblock and ABA‐type triblock copolymers of varying compositions possessing monomodal molecular weight distribution. (AB)_n multiblock copolymers [(PDMA‐b‐PDMS)_n] were prepared with between 52 and 95 wt % poly(dimethylacrylamide) with number average molecular weights (M_n) between 14,000 and 86,000 (polydispersities of 1.20–2.30). On the other hand, ABA block copolymers with DMA led to amphiphilic block copolymers (PDMA‐b‐PDMS‐b‐PDMA) with M_n values between 9000 and 44,000 (polydispersities of 1.24–1.62). © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7033–7048, 2008     

Sol‐gel transition behavior of amphiphilic comb‐like poly[(PEG‐b‐PLGA)acrylate] block copolymers

The effects of comb‐like amphiphilic block copolymer architectures on the physical properties such as sol‐gel transition and micellization behaviors with the change of temperature and pH were examined. Comb‐like poly((poly(ethylene glycol)‐b‐(poly(lactic acid‐co‐glycolic acid))acrylate‐co‐acrylic acid) (poly((PEG‐b‐PLGA)A‐co‐AA)) copolymers were synthesized by coupling of poly(acrylic acid) (PAA) with two different kinds of PEG‐b‐PLGA diblock copolymers to investigate the effects of the number of branches and hydrophilicity/hydrophobicity on the sol‐gel transition and micellization. The molecular weights and chemical structures were confirmed by GPC and ¹H NMR. The number of PEG‐b‐PLGA branches was gradually deviated from the feed molar ratio with increasing the molecular weight and the number of branches and due to the bulkiness of PEG‐b‐PLGA. Poly[(PEG‐b‐PLGA)A‐co‐AA] aqueous solutions showed thermosensitive sol‐gel transition behavior, and the gelation took place at lower concentration with increasing the number of branches and PLGA chain length due to the increase of hydrophobicity. The temperature, at which abrupt increase of viscosity by dynamic rheometer appeared, was also in good agreement with sol‐gel transition by tube‐titling method. The CMC, calculated from UV‐Visible spectroscopy using DPH as hydrophobic dye, also decreased with increasing the number of PEG‐b‐PLGA branches and PLGA chain length with same reason. The micelle size was increased with increasing temperature at the initial stage, however, decreased with further increase of temperature, since the micelles were, first, aggregated by hydrophobic intermolecular interaction, and then fragmented by dehydration of PEG segments with increasing temperature. PH‐sensitive PAA backbone played a key role in physical properties. With decreasing pH, sol‐to‐gel transition temperature, CMC values, and micelle size were decreased because of the increase of hydrophobicity resulting form non‐ionized acrylic acid. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1287–1297, 2010     

Synthesis and characterization of amphiphilic copolymer of linear poly(ethylene oxide) linked with [poly(styrene‐co‐2‐hydroxyethyl methacrylate)‐graft‐poly(ε‐caprolactone)] using sequential controlled polymerization

A well‐defined amphiphilic copolymer of ‐poly(ethylene oxide) (PEO) linked with comb‐shaped [poly(styrene‐co‐2‐hydeoxyethyl methacrylate)‐graft‐poly(ε‐caprolactone)] (PEO‐b‐P(St‐co‐HEMA)‐g‐PCL) was successfully synthesized by combination of reversible addition‐fragmentation chain transfer polymerization (RAFT) with ring‐opening anionic polymerization and coordination–insertion ring‐opening polymerization (ROP). The α‐methoxy poly(ethylene oxide) (mPEO) with ω,3‐benzylsulfanylthiocarbonylsufanylpropionic acid (BSPA) end group (mPEO‐BSPA) was prepared by the reaction of mPEO with 3‐benzylsulfanylthiocarbonylsufanyl propionic acid chloride (BSPAC), and the reaction efficiency was close to 100%; then the mPEO‐BSPA was used as a macro‐RAFT agent for the copolymerization of styrene (St) and 2‐hydroxyethyl methacrylate (HEMA) using 2,2‐azobisisobutyronitrile as initiator. The molecular weight of copolymer PEO‐b‐P(St‐co‐HEMA) increased with the monomer conversion, but the molecular weight distribution was a little wide. The influence of molecular weight of macro‐RAFT agent on the polymerization procedure was discussed. The ROP of ε‐caprolactone was then completed by initiation of hydroxyl groups of the PEO‐b‐P(St‐co‐HEMA) precursors in the presence of stannous octoate (Sn(Oct)₂). Thus, the amphiphilic copolymer of linear PEO linked with comb‐like P(St‐co‐HEMA)‐g‐PCL was obtained. The final and intermediate products were characterized in detail by NMR, GPC, and UV. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 467–476, 2006