Synthesis of star poly(1,3‐cyclohexadiene): Grafting reaction of poly(1,3‐cyclohexadienyl)lithium onto C60

The grafting reaction of poly(1,3‐cyclohexadienyl)lithium onto fullerene‐C₆₀ (C₆₀) was strongly affected by the nucleophilicity of poly(1,3‐cyclohexadiene) (PCHD) carbanions and the polymer chain microstructure, and progressed via step‐by‐step reactions. A star‐shaped PCHD, having a maximum of four arms, was obtained from poly(1,3‐cyclohexadienyl)lithium composed of all 1,4‐cyclohexadiene (1,4‐CHD) units. The rate of the grafting reaction was accelerated by the addition of amine. The grafting density of PCHD arms onto C₆₀ decreased with an increase in the molar ratio of 1,2‐cyclohexadiene (1,2‐CHD) units. The electron‐transfer reaction from PCHD carbanions to C₆₀ did not occur in either a nonpolar solvent or a polar solvent. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3282–3293, 2008.     

Novel amphiphilic block copolymers derived from the selective fluorination and sulfonation of poly(styrene‐block‐1,3‐cyclohexadiene)

Diblock copolymers of polystyrene‐block‐(1,3‐cyclohexadiene) (PS‐b‐PCHD), with varied molecular weights and compositions, were synthesized by sequential polymerization of styrene and 1,3‐cyclohexadiene (CHD) initiated by sec‐butyllithium in cyclohexane in the presence of appropriate additives during formation of the PCHD block. The residual double bonds in the PCHD block were saturated by addition of in situ generated difluorocarbene and/or hydrogen to enhance thermal and chemical stability. The fluorinated and/or hydrogenated polydiene blocks were chemically stable, allowing for controlled sulfonation of the PS blocks using acetyl sulfate. ¹H NMR and FT‐IR characterization confirmed successful fluorination/hydrogenation and sulfonation of the respective blocks. The resulting amphiphilic block copolymers consist of a semiflexible fluorine‐containing hydrophobic block having a bridged double ring structure and a hydrophilic sulfonated PS block. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Oxidation of poly(1,3‐cyclohexadiene): Influence of the polymer chain structure

The influence of the microstructure on the oxidation of poly(1,3‐cyclohexadiene) (PCHD) homopolymer, obtained by anionic polymerization with alkyllithium/amine systems, was investigated for the first time. PCHD has a structure consisting of a main chain formed by 1,2‐addition (the 1,2‐CHD unit) and 1,4‐addition (the 1,4‐CHD unit). The molar ratio of 1,2‐CHD/1,4‐CHD units in the polymer chain strongly influenced the extent of oxidation of PCHD. A polymer chain with a high content of 1,4‐CHD units was easily oxidized by air and 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ). In contrast, the progress of oxidation was prevented in the case of PCHD containing 52% of 1,2‐CHD units. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 837–845, 2006     

Anionic polymerization of 1,3‐cyclohexadiene with alkyllithium/amine system in an aromatic hydrocarbon solvent: Predominant formation of 1,2‐addition product

Steric hindrance of the amine strongly affected the formation of the dominant 1,2‐addition product from the anionic polymerization of 1,3‐cyclohexadiene (1,3‐CHD) initiated by the alkyllithium (RLi)/amine system in an aromatic hydrocarbon solvent. 1,2‐Cyclohexadiene (1,2‐CHD)/1,4‐cyclohexadiene (1,4‐CHD) unit molar ratios from 85/15 to 93/7 were obtained using an RLi/N,N,N′,N′‐tetramethylethylenediamine (TMEDA) system in toluene. The C? Li bonds of poly(1,3‐cyclohexadienyl)lithium (PCHDLi)/TMEDA complex in toluene appeared to be strongly polarized with small steric hindrance. Intermolecular forces contributing to the aggregation were strong for high‐molecular‐weight poly(1,3‐cyclohexadiene) (PCHD) consisting of almost all 1,2‐CHD units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6604–6611, 2008     

Aggregation of poly(1,3‐cyclohexadiene): Effects of molecular weight and polymer chain structure

The aggregation of poly(1,3‐cyclohexadiene) (PCHD), obtained by anionic polymerization with alkyllithium/amine systems, was examined using size exclusion chromatography (SEC) and size exclusion chromatography coupled with a multiangle laser light scattering photometer (SEC‐MALS). The PCHD polymer chain has a structure consisting of a main chain formed by 1,2‐addition (the 1,2‐CHD unit) and 1,4‐addition (the 1,4‐CHD unit). Mild stirring with relatively low temperature in the polymerization reaction forms an aggregation of PCHD. The molecular weight and molar ratio of 1,2‐CHD/1,4‐CHD units in the polymer chain strongly influence the aggregation of PCHD. In a high molecular weight PCHD, containing ～50% 1,2‐CHD units, an aggregation of the polymer was observed in tetrahydrofuran (THF) solution at room temperature. This aggregation of PCHD was soluble in 1,2,4‐trichlorobenzene (TCBz) and could be separated into each polymer molecule. In contrast, a polymer chain with a high content of 1,4‐CHD units having a relatively low cis‐stereospecificity was easily soluble in THF and TCBz without aggregating. A long polymer chain structure with a high content of 1,2‐CHD units is considered to be the reason for the generation of strong intermolecular forces contributing to the aggregation of PCHD with the solvophobic interactions. The degree of aggregation could be controlled by the conditions of the PCHD polymer solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1442–1452, 2006     

Thermal stability of the fullerene‐chain link in 6‐arm PS stars with a C60 core

The thermal stability of well‐defined hexa‐adducts (PS)₆C₆₀ in solution at temperatures around 100 °C has been studied by multi‐detector Size Exclusion Chromatography. The degradation reaction corresponds to a quantitative release of the polystyrene arms from the fullerene core through thermal cleavage of the PS‐C₆₀ link. From the kinetics of formation of cut arms and the progressive decrease of the stars' functionality, we could establish that the reaction follows a stepwise “breaking” mechanism where a 6‐arm star is first converted to a 5‐arm star, then to a 4‐arm star, and so on down to the ungrafted arm. Furthermore, not only does the thermal stability of the PS? C₆₀ bond increase if the functionality of the star decreases, but the difference is large enough to allow determination of the kinetics constants for the first three steps. The activation energy for the breaking of an arm‐C₆₀ link is about 65 kJ/mol. The stability of (PS)₆C₆₀ slightly decreases with an increase of the arm length. MALDI‐TOF mass spectroscopy has shown that both C? C bonds in α and β positions to C₆₀ can be cut, but the breaking of the direct fullerene‐arm bond is favored. We have also found that a polyisoprene? C₆₀ bond is about seven times less stable than a PS‐fullerene link upon heating. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4820–4829, 2004     

Diblock copolymers of polystyrene‐b‐poly(1,3‐cyclohexadiene) exhibiting unique three‐phase microdomain morphologies

The synthesis and molecular characterization of a series of conformationally asymmetric polystyrene‐block‐poly(1,3‐cyclohexadiene) (PS‐b‐PCHD) diblock copolymers (PCHD: ～90% 1,4 and ～10% 1,2), by sequential anionic copolymerization high vacuum techniques, is reported. A wide range of volume fractions (0.27 ≤ ?_PS ≤ 0.91) was studied by transmission electron microscopy and small‐angle X‐ray scattering in order to explore in detail the microphase separation behavior of these flexible/semiflexible diblock copolymers. Unusual morphologies, consisting of PCHD core(PCHD‐1,4)–shell(PCHD‐1,2) cylinders in PS matrix and three‐phase (PS, PCHD‐1,4, PCHD‐1,2) four‐layer lamellae, were observed suggesting that the chain stiffness of the PCHD block and the strong dependence of the interaction parameter χ on the PCHD microstructures are important factors for the formation of this unusual microphase separation behavior in PS‐b‐PCHD diblock copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1564–1572     

Synthesis of poly(p‐phenylene)‐poly(4‐diphenylaminostyrene) bipolar block copolymers with a well‐controlled and defined polymer chain structure

A poly(p‐phenylene) (PPP)‐poly(4‐diphenylaminostyrene) (PDAS) bipolar block copolymer was synthesized for the first time. A prerequisite prepolymer, poly(1,3‐cyclohexadiene) (PCHD)‐PDAS binary block copolymer, in which the PCHD block consisted solely of 1,4‐cyclohexadiene (1,4‐CHD) units, was synthesized by living anionic block copolymerization of 1,3‐cyclohexadiene and 4‐diphenylaminostyrene. To obtain the PPP‐PDAS bipolar block copolymer, the dehydrogenation of this prepolymer with quinones was examined, and tetrachloro‐1,2‐(o)‐benzoquinone was found to be an appropriate dehydrogenation reagent. This dehydrogenation reaction was remarkably accelerated by ultrasonic irradiation, effectively yielding the target PPP‐PDAS bipolar block copolymer. The hole and electron drift mobilities for PPP‐PDAS bipolar block copolymer were both on the order of 10^?3 to 10^?4 cm²/V·s, with a negative slope when plotted against the square root of the applied field. Therefore, this bipolar block copolymer was found to act as a bipolar semi‐conducting copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Oxidation and epoxidation of poly(1,3‐cyclohexadiene)

Poly(1,3‐cyclohexadiene) (PCHD) derivatives were synthesized via facile chemical modification reactions of the residual double bond in the repeat unit. The oxidation and degradation of PCHD was investigated to enable subsequent controlled epoxidation reactions. PCHD exhibited a 15% weight loss at 110 °C in the presence of oxygen. The oxidative degradation, demonstrated by gel permeation chromatography (GPC) and ¹H NMR spectroscopy, was attributed to main‐chain scission. Aldehyde and ether functional groups were introduced into the polymer during the oxidation process. PCHD was quantitatively epoxidized in the absence of deleterious oxidation with meta‐chloroperoxybenzoic acid. ¹H and ¹³C NMR spectroscopy confirmed that polymers with controlled degrees of epoxidation were reproducibly obtained. Epoxidized PCHD exhibited a glass‐transition temperature at 154 °C, which was slightly higher than that of a PCHD precursor of a nearly equivalent molecular weight. Moreover, GPC indicated the absence of undesirable crosslinking or degradation, and the molecular weight distributions remained narrow. The thermooxidative stability of the fully epoxidized polymer was compared to that of the PCHD precursor, and the epoxidized PCHD exhibited an initial weight loss at 250 °C in oxygen, which was 140 °C higher than the temperature for PCHD. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 84–93, 2003     

Synthesis of fac‐Ir(ppy)3 end‐functionalized poly(1,3‐cyclohexadiene): single monomer addition of fac‐Ir(ppy)2(vppy) for well‐controlled polymer synthesis

Synthesis of the polymer whose end is functionalized by fac‐Ir(ppy)₃ (ppy = 2‐phenylpyridyl) was achieved by using (living) anionic polymerization of 1,3‐cyclohexadiene: the reaction of poly(1,3‐cyclohexadienyl)lithium (PCHDLi) with fac‐Ir(ppy)₂(vppy) [vppy = 2‐(4‐vinylphenyl)pyridyl] resulted in nucleophilic attack of the carbanion in PCHDLi on the vinyl group of fac‐Ir(ppy)₂(vppy) selectively. Complexation of the pyridyl ring protected the α‐carbons of fac‐Ir(ppy)₂(vppy) from the reaction of the anionic polymer. The homopolymerization of fac‐Ir(ppy)₂(vppy) did not occur, and only one molecule of fac‐Ir(ppy)₂(vppy) reacted with the carbanion of PCHDLi and was selectively incorporated into an end of poly(1,3‐cyclohexadiene) (PCHD). Thus, the PCHD with fac‐Ir(ppy)₃ end‐group was obtained with a well‐controlled and defined polymer structure and molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Effect of solvent on the dehydrogenation of poly(1,3‐cyclohexadiene): Formation and characteristics of benzoquinone–aromatic hydrocarbon charge‐transfer complexes

The effect of solvent on the dehydrogenation of poly(1,3‐cyclohexadiene) (PCHD) with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) [or 2,3,5,6‐tetrachloro‐1,4‐(p‐)‐benzoquinone (TCQ)] was examined to improve the reactivity of benzoquinones for this dehydrogenation reaction. The dehydrogenation of PCHD with DDQ (or TCQ) was strongly affected by the type of solvent, and aromatic hydrocarbon based solvents were appropriate for this dehydrogenation reaction. A charge‐transfer complex between DDQ (or TCQ) and aromatic hydrocarbons was formed in the reaction mixture, and the reactivity of the complex was much higher than that of free DDQ (or TCQ). The formation of a DDQ–aromatic hydrocarbon complex, which has a large diamagnetic shift of the ¹³C NMR signals with respect to DDQ, was the primary factor for improvement of the reactivity of DDQ. For the TCQ–aromatic hydrocarbon complex, the existence of an electron‐withdrawing group on the aromatic hydrocarbon was the major factor for improvement of the reactivity of TCQ. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 342–350, 2010     

Synthesis of porphyrin‐end‐functionalized polycyclohexane with well‐controlled and defined polymer chain structure

Tetraphenylporphyrin‐end‐functionalized polycyclohexane (H₂TPP‐PCHE) and its metal complexes (MTPP‐PCHE) were synthesized as the first successful example of porphyrin‐end‐functionalized transparent and stable polymers with a well‐controlled and defined polymer chain structure. Chloromethyl‐end‐functionalized poly(1,3‐cyclohexadiene) (CM‐PCHD) was synthesized as prerequisite prepolymer by the postpolymerization reaction of poly(1,3‐cyclohexadienyl)lithium and chloro(chloromethyl)dimethylsilane. CM‐end‐functionalized PCHE (CM‐PCHE) was prepared by the complete hydrogenation of CM‐PCHD with p‐toluenesulfonyl hydrazide. H₂TPP was incorporated onto the polymer chain end by the addition of 5‐(4‐hydroxyphenyl)‐10,15,20‐triphenylporphyrin to CM‐PCHE. The complexation of H₂TPP‐PCHE and Zn(OAc)₂ (or PtCl₂) yielded a zinc (or platinum) complex of H₂TPP‐PCHE. H₂TPP‐PCHE and MTPP‐PCHE were readily soluble in common organic solvents, and PCHE did not inhibit the optical properties of the H₂TPP, ZnTPP, and PtTPP end groups. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Microphase‐separated structure of 1,3‐cyclohexadiene/butadiene triblock copolymers and its effect on mechanical and thermal properties

We report the effect of microphase‐separated structure on the mechanical and thermal properties of several poly(1,3‐cyclohexadiene‐block‐butadiene‐block‐1,3‐cyclohexadiene) triblock copolymers (PCHD‐block‐PBd‐block‐PCHD) and of their hydrogenated derivatives: poly(cyclohexene‐block‐ethylene/butylene‐block‐cyclohexene) triblock copolymers (PCHE‐block‐PEB‐block‐PCHE). Both mechanical strength and heat‐resistant temperature (ex. Vicat Softening Temperature: VSPT) tended to increase with an increase in the 1,3‐cyclohexadiene (CHD)/butadiene ratio. On the other hand, heat resistance of the hydrogenated block copolymer was found to be higher than that of the unhydrogenated block copolymer. However, the mechanical strength was lower than those of the unhydrogenated block copolymer with the same ratio of CHD to butadiene. To clarify the relationship between the higher order structures of those block copolymers and their properties, we observed the microphase‐separated structure by transmission electron microscope (TEM). Hydrogenated block copolymers were found to have more finely dispersed microphase‐separated structures than those of the unhydrogenated block copolymers with the same CHD/Bd ratios through the use of TEM and the small‐angle X‐ray scattering (SAXS) technique. Those results indicated that the segregation strength between the PCHE block sequence and the PEB block sequence increased, depending on hydrogenation of the unhydrogenated precursor. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 13–22, 2001     

New Insights into the Hexaphenylethane Riddle: Formation of an α,o‐Dimer

Upon reduction of a 1H‐cyclobuta[de]naphthalene‐4,5‐diylbis(diarylmethylium) species, a new C? C bond is formed between the C_α and C_ortho atoms of the two chromophores, which presents an unprecedented coupling pattern for the dimerization of two trityl units. By attaching an annulated cyclobutane ring at the opposite peri position of the naphthalene core, the distance between the C_α carbon atoms was elongated beyond the limit of σ‐bond formation through “scissor effects”. The suppression of C_α? C_α bond formation, which would lead to hexaphenylethane‐type compounds, is key to the first successful isolation of the α,o‐adducts. The 5‐diarylmethylene‐6‐triarylmethyl‐1,3‐cyclohexadiene unit in the α,o‐adducts is stable, and isomerization of the cyclohexadiene unit into an aromatic system was not observed. The newly formed C_α? C_ortho bond was cleaved upon two‐electron oxidation to regenerate the dicationic dye.     

Synthesis of soluble poly(para‐phenylene) with a long polymer chain: Characteristics of regioregular poly(1,4‐phenylene)

Soluble poly(para‐phenylene) having a long polymer chain (more than six repeat units) was synthesized with a tert‐butyl end‐group (t‐PPP) and was found to have improved solubility and excellent optical properties. Poly(1,3‐cyclohexadiene) (PCHD) consisting of only 1,4‐cyclohexadiene (1,4‐CHD) units was synthesized with a tert‐butyl end‐group (t‐PCHD), and completely dehydrogenated to obtain t‐PPP. This end‐group effectively prevented the crystallization of t‐PPP, and polymers containing up to 16 repeat units were soluble in tetrahydrofuran. Soluble t‐PPP obtained had an ability to form a tough thin film prepared by spin‐coating method. Optical analyses of t‐PPP provided strong evidence for a linear polymer chain structure. A block copolymer of t‐PPP and a soluble polyphenylene (PPH) was then synthesized, and the excellent optical properties were retained by this block copolymer along with its solubility. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5223–5231, 2008     

Synthesis of di‐ and tetra‐adducts by addition of polystyrene macroradicals onto fullerene C60

Br‐terminated polystyrenes of controlled molar masses and low polydispersities prepared by atom transfer radical polymerization (ATRP) can be converted to macroradicals using an appropriate catalytic complex (CuBr/bipyridine/100 °C). The addition of this macroradicals PS° to 6–6 bonds of C₆₀ follows a specific atom transfer radical addition mechanism that favors the grafting of even number of chains onto the fullerene core. This peculiar mechanism, resulting from the properties of C₆₀, offers an easy synthetic route toward well‐defined di‐ and tetra‐adducts. In these adducts the disturbance of the electronic structure of the fullerene is kept at its minimum, as only one double bond needs to be opened on the C₆₀ to add two PS chains and only two double bonds are converted to single bonds in the tetra‐adduct. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3456–3463, 2004     

Synthesis of soluble single‐walled carbon nanotubes with poly (1,3‐cyclohexadiene): Grafting poly(1,3‐cyclohexadienyl)lithium onto a solid surface

The first‐ever grafting of poly(1,3‐cyclohexadiene) (PCHD) onto single‐walled carbon nanotubes (SWNTs) was accomplished by reaction with poly(1,3‐cyclohexadienyl)lithium. The rate of this reaction was especially slow due to the heterogeneous nature of the reaction system. The concentration of active carbons available for reaction with PCHDLi on the solid surface of the SWNTs was found to be approximately 2.0 mol %. The mass of PCHD attached to the SWNTs was effectively controlled by varying the molecular weight of the PCHD. The resulting PCHD‐grafted SWNTs exhibited excellent solubility in organic solvent, maintaining a highly stable homogeneous dispersion even after 3 months. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Dehydrogenation of poly(1,3‐cyclohexadiene)–polystyrene binary block copolymers

The dehydrogenation of poly(1,3‐cyclohexadiene)–polystyrene binary block copolymers obtained by anionic copolymerization with alkyllithium/amine systems was investigated for the first time. The dehydrogenation of the poly(1,3‐cyclohexadiene) block, which was composed of 1,2‐cyclohexadiene (1,2‐CHD) and 1,4‐cyclohexadiene (1,4‐CHD) units, was strongly affected by the polymer chain structure. The existence of 1,2‐CHD units prevented the dehydrogenation of the poly(1,3‐cyclohexadiene) block in the binary block copolymer. The rate of dehydrogenation was fast on a long sequence of 1,4‐CHD units, whereas it was relatively slow for 1,2‐CHD/1,4‐CHD (≈1/1) unit sequences. The bonding of the polystyrene block to the polymer chain effectively improved not only the rate of dehydrogenation of a long sequence of 1,4‐CHD units but also that of the polymer chain with a high content of 1,2‐CHD units. The dehydrogenation of a poly(1,3‐cyclohexadiene) block containing a small number of 1,2‐CHD units progressed via step‐by‐step reactions. The dehydrogenation of a long sequence of 1,4‐CHD units proceeded as the first step. Subsequently, in the second step, the 1,2‐CHD/1,4‐CHD (≈1/1) unit sequences remaining in the polymer chain were dehydrogenated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3526–3537, 2006     

Synthesis of a [60]fullerene‐functionalized poly(vinyl chloride) derivative by stereospecific chemical modification of PVC

The covalent attachment of [60]fullerene (C₆₀) to two poly(vinyl chloride) (PVC) samples with different isotactic content is achieved by direct reaction in o‐dichlorobenzene (o‐DCB) solution in the presence of AIBN. The extent of fullerenation is controlled by varying the C₆₀ feed ratio. The pendant C₆₀‐chemically modified PVC polymers are soluble in tetrahydrofuran (THF) and have been characterized by UV–vis, NMR, FTIR, DSC, TGA, cyclic voltammetry, and SEM. The quantitative microstructural analysis after covalent attachment of the bulky C₆₀ moiety to the PVC has been followed by ¹³C NMR spectroscopy. From the results it can be concluded that the modification of PVC by graft reaction through free radical reaction proceeds by a stereoselective mechanism. This conclusion has been confirmed on the basis of the increase of the glass‐transition temperature (T_g) and the thermal stability of the C₆₀‐chemical modified PVC samples. The fullerenated PVCs obtained show good electron acceptor properties, as evidenced by electrochemical investigations. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5408–5419, 2007     

Activation of the Unreactive Bond in C70 Fullerene toward Diels‐Alder Reaction by Encapsulation of a Lithium Atom

Diels‐Alder cycloaddition reaction is useful for generation of covalent derivatives of fullerenes. Diels‐Alder reactions of C₇₀ and dienes usually take place at the carbon‐carbon bond that has a short bond length in C₇₀, while the bonds with long lengths are generally unreactive. In this paper, we investigated the reactivities of Li⁺@C₇₀ and Li@C₇₀ toward Diels‐Alder reactions with cyclohexadiene by means of density functional theory calculations. We found that the thermodynamic and kinetic reactivities of the fullerene cage are changed significantly after the encapsulation of the lithium ion or atom. The encapsulated lithium ion causes a remarkable decrease of the activation barrier for the cycloaddition reaction, which can be ascribed to the enhanced orbital interaction between cyclohexadiene and the fullerene cage. The unreactive bond with a long length in C₇₀ is activated efficiently after the encapsulation of the lithium atom. According to the activation‐strain model analysis, the improved reactivity of the long bond is associated with the small deformation energy and large interaction energy of the reactants. Unlike conventional Diels‐Alder reactions that proceed through concerted mechanism, the reaction of Li@C₇₀ and cyclohexadiene undergoes an unusual stepwise mechanism because of the open‐shell electronic structure of Li@C₇₀.