Phosphine (oxide)‐(thio) phenolate palladium complexes: Synthesis,characterization and (co)polymerization of norbornene

A series of palladium complexes ( 2a–2g ) ( 2a : [6‐^tBu‐2‐PPh₂‐C₆H₃O]PdMe(Py); 2b : [6‐C₆F₅–2‐PPh₂‐C₆H₃O]PdMe(Py); 2c : [6‐^tBu‐2‐PPh^tBu‐C₆H₃O]PdMe(Py); 2d : [2‐PPh^tBu‐C₆H₄O] PdMe(Py); 2e : [6‐SiMe₃–2‐PPh₂‐C₆H₃O]PdMe(Py); 2f : [2‐^tBu‐6‐(Ph₂P=O)‐C₆H₃O]PdMe(Py); 2g : [6‐SiMe₃–2‐(Ph₂P=O)‐C₆H₃S]PdMe(Py)) bearing phosphine (oxide)‐(thio) phenolate ligand have been efficiently synthesized and characterized. The solid‐state structures of complexes 2d , 2f and 2g have been further confirmed by single‐crystal X‐ray diffraction, which revealed a square‐planar geometry of palladium center. In the presence of B(C₆F₅)₃, these complexes can be used as catalysts to polymerize norbornene (NB) with relatively high yields, producing vinyl‐addition polymers. Interestingly, 2a /B(C₆F₅)₃ system catalyzed the polymerization of NB in living polymerization manner at high temperature (polydispersity index 1.07, M_n up to 1.5 × 10⁴). The co‐polymerization of NB and polar monomers was also studied using catalysts 2a and 2f . All the obtained co‐polymers could dissolve in common solvent.     

Ni(II) and Pd(II) complexes bearing novel bis(β‐ketoamino) ligand and their catalytic activity toward copolymerization of norbornene and 5‐norbornene‐2‐yl acetate combined with B(C6F5)3

Two complexes Mt{C₁₀H₈(O)C[N(C₆H₅)]CH₃}₂ [Mt = Ni(II); Mt = Pd(II)] were synthesized, and the solid‐state structures of the complexes have been determined by single‐crystal X‐ray diffractions. Homopolymerization of norbornene (NB) and copolymerization of NB and 5‐norbornene‐2‐yl acetate (NB‐OCOCH₃) were carried out in toluene with both the two complexes mentioned above in combination with B(C₆F₅)₃. Both the catalytic systems exhibited high activity toward the homopolymerization of NB (as high as 2.7 × 10⁵ g_polymer/mol_Ni h, for Ni(II)/B(C₆F₅)₃ and 2.1 × 10⁵ g_polymer/mol_Pd h for Pd(II)/B(C₆F₅)₃, respectively.). Although the Pd(II)/B(C₆F₅)₃ shows very lower activity toward the copolymerization of NB with NB‐OCOCH₃, Ni(II)/B(C₆F₅)₃ shows a high activity and produces the addition‐type copolymer with relatively high molecular weights (MWs; 1.80–2.79 × 10⁵ g/mol) as well as narrow MW distribution (1.89–2.30). The NB‐OCOCH₃ content in the copolymers can be controlled up to 5.8–12.0% by varying the comonomer feed ratios from 10 to 50%. The copolymers exhibited high transparency, high glass transition temperature (T_g > 263.9 °C), better solubility, and mechanical properties compared with the homopolymer of NB. The reactivity ratios of the two monomers were determined to be r_NB‐OCOMe = 0.08, r_NB = 7.94 for Ni(II)/B(C₆F₅)₃ system, and r_NB‐OCOMe = 0.07, r_NB = 6.49, for Pd(II)/B(C₆F₅)₃ system by the Kelen‐Tüdõs method. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Pd(II) complexes bearing di‐ and monochelate fluorinated β‐ketonaphthyliminato ligand and their catalytic properties towards vinyl‐addition polymerization and copolymerization of norbornene and ester‐functionalized norbornene derivative

Fluorinated β‐ketonaphthyliminate ligand CF₃C(O)CHC[HN(naphthyl)]CH₃ ( L1 ) and Pd(II) complexes with dichelate fluorinated β‐ketonaphthyliminato ligand, {CF₃C(O)CHC[N(naphthyl)]CH₃}₂Pd ( C1 ), as well as with monochelate fluorinated β‐ketonaphthyliminato ligand, {CF₃C(O)CHC[N(naphthyl)]CH₃}Pd(CH₃)(PPh₃) ( C2 ), were synthesized and their solid‐state structures were confirmed using X‐ray crystallographic analysis. The Pd(II) complexes were employed as precursors to catalyze norbornene (NB) homo‐ and copolymerization with ester‐functionalized NB derivative using B(C₆F₅)₃ as a co‐catalyst. High activity up to 2.3 × 10⁵ g_polymer mol_Pd^?1 h^?1 for the C1 /B(C₆F₅)₃ system and 3.4 × 10⁶ g_polymer mol_Pd^?1 h^?1 for the C2 /B(C₆F₅)₃ system was exhibited in NB homopolymerization. Moreover, the Pd(II) complexes exhibited a high level of tolerance towards the ester‐functionalized MB monomer. In comparison with the C1 /B(C₆F₅)₃ system, the C2 /B(C₆F₅)₃ system exhibited better catalytic property towards the copolymerization of NB with 5‐norbornene‐2‐carboxylic acid methyl ester (NB‐COOCH₃), and soluble vinyl‐addition‐type copolymers were obtained with relatively high molecular weights (3.6 × 10⁴–7.5 × 10⁴ g mol^?1) as well as narrow molecular weight distributions (1.49–2.15) depending on the variation of monomer feed ratios. The NB‐COOCH₃ insertion ratio in all copolymers could be controlled in the range 2.8–21.0 mol% by tuning a content of 10–50 mol% NB‐COOCH₃ in the monomer feed ratios. Copolymerization kinetics were expressed by the NB and NB‐COOCH₃ monomer reactivity ratios: r_NB‐COOCH3 = 0.18, r_NB = 1.28 were determined for the C1 /B(C₆F₅)₃ system and r_NB‐COOCH3 = 0.19, r_NB = 3.57 for the C2 /B(C₆F₅)₃ system using the Kelen–Tüdõs method. Copyright © 2014 John Wiley & Sons, Ltd.     

Bis(arylimido) Molybdenum(VI) Amidinate and Guanidinate Complexes; Molecular Structures of [(ArN)2MoMe{N(Cy)C[N(i‐Pr)2]N(Cy)}] (Ar = 2,6‐i‐Pr2C6H3; Cy = Cyclohexyl) and [(2,6‐i‐Pr2C6H3N)2MoCl2] · [NH=C(C6H5)CH(SiMe3)2]

The reaction of [(ArN)₂MoCl₂] · DME (Ar = 2,6‐i‐Pr₂C₆H₃) ( 1 ) with lithium amidinates or guanidinates resulted in molybdenum(VI) complexes [(ArN)₂MoCl{N(R¹)C(R²)N(R¹)}] (R¹ = Cy (cyclohexyl), R² = Me ( 2 ); R¹ = Cy, R² = N(i‐Pr)₂ ( 3 ); R¹ = Cy, R² = N(SiMe₃)₂ ( 4 ); R¹ = SiMe₃, R² = C₆H₅ ( 5 )) with five coordinated molybdenum atoms. Methylation of these compounds was exemplified by the reactions of 2 and 3 with MeLi affording the corresponding methylates [(ArN)₂MoMe{N(R¹)C(R²)N(R¹)}] (R¹ = Cy, R² = Me ( 6 ); R¹ = Cy, R² = N(i‐Pr)₂ ( 7 )). The analogous reaction of 1 with bulky [N(SiMe₃)C(C₆H₅)C(SiMe₃)₂]Li · THF did not give the corresponding metathesis product, but a Schiff base adduct [(ArN)₂MoCl₂] · [NH=C(C₆H₅)CH(SiMe₃)₂] ( 8 ) in low yield. The molecular structures of 7 and 8 are established by the X‐ray single crystal structural analysis.     

Syntheses and Catalytic Hydrogenation Performance of Cationic Bis(phosphine) Cobalt(I) Diene and Arene Compounds

Chloride abstraction from [(R,R)‐(^iPrDuPhos)Co(μ‐Cl)]₂ with NaBAr^F₄ (BAr^F₄=B[(3,5‐(CF₃)₂)C₆H₃]₄) in the presence of dienes, such as 1,5‐cyclooctadiene (COD) or norbornadiene (NBD), yielded long sought‐after cationic bis(phosphine) cobalt complexes, [(R,R)‐(^iPrDuPhos)Co(η²,η²‐diene)][BAr^F₄]. The COD complex proved substitutionally labile undergoing diene substitution with tetrahydrofuran, NBD, or arenes. The resulting 18‐electron, cationic cobalt(I) arene complexes, as well as the [(R,R)‐(^iPrDuPhos)Co(diene)][BAr^F₄] derivatives, proved to be highly active and enantioselective precatalysts for asymmetric alkene hydrogenation. A cobalt–substrate complex, [(R,R)‐(^iPrDuPhos)Co(MAA)][BAr^F₄] (MAA=methyl 2‐acetamidoacrylate) was crystallographically characterized as the opposite diastereomer to that expected for productive hydrogenation demonstrating a Curtin–Hammett kinetic regime similar to rhodium catalysis.     

Conformational change induced by hydration: trans‐dichloro­bis­[(1R,2R,3R,5S)‐(–)‐isopinocampheylamine]palladium(II) and trans‐dichloro­bis[(1S,2S,3S,5R)‐(+)‐isopinocampheylamine]palladium(II) hemihydrate

The title compounds, trans‐dichloro­bis[(1R,2R,3R,5S)‐(−)‐2,6,6‐trimethyl­bicyclo­[3.1.1]heptan‐3‐amine]palladium(II), [PdCl₂(C₁₀H₁₉N)₂], and trans‐dichloro­bis[(1S,2S,3S,5R)‐(+)‐2,6,6‐trimethyl­bicyclo­[3.1.1]heptan‐3‐amine]palladium(II) hemihydrate, [PdCl₂(C₁₀H₁₉N)₂]·0.5H₂O, present different arrangements of the amine ligands coordinated to Pd^II, viz. antiperiplanar in the former case and (−)anticlinal in the latter. The hemihydrate is an inclusion compound, with a Pd coordination complex and disordered water mol­ecules residing on crystallographic twofold axes. The crystal structure for the hemihydrate includes a short Pd⋯Pd separation of 3.4133 (13) Å.     

Charge Effects in PCP Pincer Complexes of NiII bearing Phosphinite and Imidazol(i)ophosphine Coordinating Jaws: From Synthesis to Catalysis through Bonding Analysis

This contribution reports on a new family of Ni^II pincer complexes featuring phosphinite and functional imidazolyl arms. The proligands ^RPIMC^HOP^R′ react at room temperature with Ni^II precursors to give the corresponding complexes [(^RPIMCOP^R′)NiBr], where ^RPIMCOP^R=κ^P,κ^C,κ^P‐{2‐(R′₂PO),6‐(R₂PC₃H₂N₂)C₆H₃}, R=iPr, R′=iPr ( 3 b , 84 %) or Ph ( 3 c , 45 %). Selective N‐methylation of the imidazole imine moiety in 3 b by MeOTf (OTf=OSO₂CF₃) gave the corresponding imidazoliophosphine [(^iPrPIMIOCOP^iPr)NiBr][OTf], 4 b , in 89 % yield (^iPrPIMIOCOP^iPr=κ^P,κ^C,κ^P‐{2‐(iPr₂PO),6‐(iPr₂PC₄H₅N₂)C₆H₃}). Treating 4 b with NaOEt led to the NHC derivative [(NHCCOP^iPr)NiBr], 5 b , in 47 % yield (NHCCOP^iPr=κ^P,κ^C,κ^C‐{2‐(iPr₂PO),6‐(C₄H₅N₂)C₆H₃)}). The bromo derivatives 3–5 were then treated with AgOTf in acetonitrile to give the corresponding cationic species [(^RPIMCOP^R)Ni(MeCN)][OTf] [R=Ph, 6 a (89 %) or iPr, 6 b (90 %)], [(^RPIMIOCOP^R)Ni(MeCN)][OTf]₂ [R=Ph, 7 a (79 %) or iPr, 7 b (88 %)], and [(NHCCOP^R)Ni(MeCN)][OTf] [R=Ph, 8 a (85 %) or iPr, 8 b (84 %)]. All new complexes have been characterized by NMR and IR spectroscopy, whereas 3 b , 3 c , 5 b , 6 b , and 8 a were also subjected to X‐ray diffraction studies. The acetonitrile adducts 6 – 8 were further studied by using various theoretical analysis tools. In the presence of excess nitrile and amine, the cationic acetonitrile adducts 6 – 8 catalyze hydroamination of nitriles to give unsymmetrical amidines with catalytic turnover numbers of up to 95.     

Insights into the Intramolecular Donor Stabilisation of Organostannylene Palladium and Platinum Complexes: Syntheses,Structures and DFT Calculations

The syntheses of the transition metal complexes cis‐[(4‐tBu‐2,6‐{P(O)(OiPr)₂}₂C₆H₂SnCl)₂MX₂] ( 1 , M=Pd, X=Cl; 2 , M=Pd, X=Br; 3 , M=Pd, X=I; 4 , M=Pt, X=Cl), cis‐[{2,6‐(Me₂NCH₂)₂C₆H₃SnCl}₂MX₂] ( 5 , M=Pd, X=I; 6 , M=Pt, X=Cl), trans‐[{2,6‐(Me₂NCH₂)₂C₆H₃SnI}₂PtI₂] ( 7 ) and trans‐[(4‐tBu‐2,6‐{P(O)(OiPr)₂}₂ C₆H₂SnCl)PdI₂]₂ ( 8 ) are reported. Also reported is the serendipitous formation of the unprecedented complexes trans‐[(4‐tBu‐2,6‐{P(O)(OiPr)₂}₂C₆H₂SnCl)₂ Pt(SnCl₃)₂] ( 10 ) and [(4‐tBu‐2,6‐{P(O) (OiPr)₂}₂C₆H₂SnCl)₃Pt(SnCl₃)₂] ( 11 ). The compounds were characterised by elemental analyses, ¹H, ¹³C, ³¹P, ¹¹⁹Sn and ¹⁹⁵Pt NMR spectroscopy, single‐crystal X‐ray diffraction analysis, UV/Vis spectroscopy and, in the cases of compounds 1 , 3 and 4 , also by Mössbauer spectroscopy. All the compounds show the tin atoms in a distorted trigonal‐bipyramidal environment. The Mössbauer spectra suggest the tin atoms to be present in the oxidation state III. The kinetic lability of the complexes was studied by redistribution reactions between compounds 1 and 3 as well as between 1 and cis‐[{2,6‐(Me₂NCH₂)₂C₆H₃SnCl}₂PdCl₂]. DFT calculations provided insights into both the bonding situation of the compounds and the energy difference between the cis and trans isomers. The latter is influenced by the donor strength of the pincer‐type ligands.     

(Fluoroorgano)fluoroboranes and ‐borates. 7 [1] The Reaction of RFBF2 and K [RFBF3] (RF = perfluorophenyl‐, perfluoroalk‐1‐enyl‐ and perfluoroalkyl) with Xenon Difluoride in Anhydrous HF

The dissolution of (perfluoroorgano)difluoroboranes R_FBF₂ in anhydrous HF (aHF) resulted in equilibrium mixtures of the starting borane and different kinds of acid‐base products: [H₂F] [R_FBF₂(F · HF)] (R_F = C₆F₅, cis‐C₂F₅CF=CF, trans‐C₄F₉CF=CF) or [H₂F] [R_FBF₃] (R_F = C₆F₁₃). In aHF the aryl compounds C₆F₅BF₂ and K [C₆F₅BF₃] showed two parallel reactivities with XeF₂: xenodeborylation (formation of the [C₆F₅Xe]⁺ cation) and fluorine addition to the aryl group. In aHF perfluoroalk‐1‐enyldifluoroboranes R_FBF₂ as well as potassium perfluoroalk‐1‐enyltrifluoroborates K [R_FBF₃] (R_F = cis‐C₂F₅CF=CF, trans‐C₄F₉CF=CF) underwent only fluorine addition across the carbon‐carbon double bond under the action of XeF₂. Potassium perfluorohexyltrifluoroborate K [C₆F₁₃BF₃] did not react with XeF₂ in aHF.     

Vinyl homo/copolymerization of norbornene and ethylene using sterically enhanced 1,2‐bis(arylimino)acenaphthene–palladium precatalysts

A family of unsymmetrical 1,2‐bis(imino)acenaphthene‐palladium methyl chloride complexes [1‐[2,6‐{(C₆H₅)₂CH}₂‐ 4‐{C(CH₃)₃}‐C₆H₂N]‐2‐(ArN)C₂C₁₀H₆]PdMeCl (Ar = 2,6‐Me₂Ph Pd1 , 2,6‐Et₂Ph Pd2 , 2,6‐ⁱPr₂Ph Pd3 , 2,4,6‐Me₃Ph Pd4 , 2,6‐Et₂‐4‐MePh Pd5 ) have been prepared and fully characterized by ¹H/¹³C NMR, FTIR spectroscopies, and elemental analysis. X‐ray diffraction analysis of Pd2 complex revealed a square planar geometry. Upon activation with methylaluminoxane, all the palladium complexes displayed high activities for norbornene (NBE) homo‐polymerization producing insoluble polymer. For the copolymerization of NBE with ethylene, Pd4 complex exhibited good activities with high incorporation of ethylene (up to 59.2–77.4%) and the resultant copolymer showed high molecular weights as maximum as 150.5 kg mol⁻¹. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 922–930     

Nickel(II) complexes bearing pyrazolylimine ligand: synthesis,structure, and catalytic properties for vinyl‐type polymerization of norbornene

Two nickel(II) complexes of {2‐[C₃HN₂(R₁)₂‐3,5]}[C(R₂)?N(C₆H₃ⁱPr₂‐2,6)]NiBr₂ (complex 1 : R₁ = CH₃, R₂ = 2,4,6‐trimethylphenyl; complex 2 : R₁ = R₂ = Ph) were synthesized and characterized. The solid‐state structure of complex 1 has been confirmed by X‐ray single‐crystal analysis. Activated by methylaluminoxane (MAO), complexes 1 and 2 are capable of catalyzing the polymerization of norbornene with moderate activities [up to 10.56 × 10⁵ gPNBE (mol Ni h)^?1] with high molecular weights (M_w?13.56 × 10⁵ g mol^?1) and molecular weight distributions were around 2. The influences of polymerization parameters such as reaction temperature and Al–Ni molar ratio on catalytic activity and molecular weight of the polynorbornene were investigated in detail. The obtained polynorbornenes were characterized by means of ¹H‐NMR and FTIR techniques. The analytical results of polymer structures indicated that the norbornene polymerization is vinyl‐type polymerization rather than ROMP. Copyright © 2009 John Wiley & Sons, Ltd.     

Bifunctional Rhenium Complexes for the Catalytic Transfer‐Hydrogenation Reactions of Ketones and Imines

The silyloxycyclopentadienyl hydride complexes [Re(H)(NO)(PR₃)(C₅H₄OSiMe₂tBu)] (R=iPr ( 3 a ), Cy ( 3 b )) were obtained by the reaction of [Re(H)(Br)(NO)(PR₃)₂] (R=iPr, Cy) with Li[C₅H₄OSiMe₂tBu]. The ligand–metal bifunctional rhenium catalysts [Re(H)(NO)(PR₃)(C₅H₄OH)] (R=iPr ( 5 a ), Cy ( 5 b )) were prepared from compounds 3 a and 3 b by silyl deprotection with TBAF and subsequent acidification of the intermediate salts [Re(H)(NO)(PR₃)(C₅H₄O)][NBu₄] (R=iPr ( 4 a ), Cy ( 4 b )) with NH₄Br. In nonpolar solvents, compounds 5 a and 5 b formed an equilibrium with the isomerized trans‐dihydride cyclopentadienone species [Re(H)₂(NO)(PR₃)(C₅H₄O)] ( 6 a,b ). Deuterium‐labeling studies of compounds 5 a and 5 b with D₂ and D₂O showed H/D exchange at the H_Re and H_O positions. Compounds 5 a and 5 b were active catalysts in the transfer hydrogenation reactions of ketones and imines with 2‐propanol as both the solvent and H₂ source. The mechanism of the transfer hydrogenation and isomerization reactions was supported by DFT calculations, which suggested a secondary‐coordination‐sphere mechanism for the transfer hydrogenation of ketones.     

Functionalization of Pentaphosphorus Cations by Complexation

The chemistry of polyphosphorus cations has rapidly developed in recent years, but their coordination behavior has remained mostly unexplored. Herein, we describe the reactivity of [P₅R₂]⁺ cations with cyclopentadienyl metal complexes. The reaction of [Cp^ArFe(μ‐Br)]₂ (Cp^Ar=C₅(C₆H₄‐4‐Et)₅) with [P₅R₂][GaCl₄] (R=iPr and 2,4,6‐Me₃C₆H₂ (Mes)) afforded bicyclo[1.1.0]pentaphosphanes ( 1‐R , R=iPr and Mes), showing an unsymmetric “butterfly” structure. The same products 1‐R were formed from K[Cp^Ar] and [P₅R₂][GaCl₄]. The cationic complexes [Cp^ArCo(η⁴‐P₅R₂)][GaCl₄] ( 2‐R [GaCl₄], R=iPr and Cy) and [(Cp^ArNi)₂(η^3:3‐P₅R₂)][GaCl₄] ( 3‐R [GaCl₄]) were obtained from [P₅R₂][GaCl₄] and [Cp^ArM(μ‐Br)]₂ (M=Co and Ni) as well as by using low‐valent “Cp^ArM^I” sources. Anion metathesis of 2‐R [GaCl₄] and 3‐R [GaCl₄] was achieved with Na[BArF₂₄]. The P₅ framework of the resulting salts 2‐R [BArF₂₄] can be further functionalized with nucleophiles. Thus reactions with [Et₄N]X (X=CN and Cl) give unprecedented cyano‐ and chloro‐functionalized complexes, while organo‐functionalization was achieved with CyMgCl.     

The Reactivity of Potassium Polyfluoroaryl‐, Polyfluoroalkenyl‐, and Perfluoroalkyltrifluoroborates and their Hydrocarbon Analogues towards Acids of Different Strength: A Systematic Study of the Hydrodeboration

The hydrodeboration of the (fluoroorgano)trifluoroborates K [R_FBF₃] [R_F = C₆F₅, XCF=CF (X = F, cis‐ and trans‐Cl, C₃F₇O, cis‐C₂F₅, trans‐C₄F₉, ‐C₄H₉) and C₆F₁₃] and of the organotrifluoroborates K [RBF₃] (R = C₆H₅, cis‐ and trans‐C₄H₉CH=CH, C₄H₉ and C₈H₁₇) with CH₃CO₂H (100 %), CF₃CO₂H (100 %), aqueous HF and anhydrous HF was investigated. In the alkenyltrifluoroborates K [R'CF=CFBF₃] the formal replacement of BF₃ by a proton occurred stereospecifically under retention of the configuration. The ¹⁹F NMR spectra of K [R_FBF₃] in acids indicate strong interactions of the BF₃ group with protons or acid molecules.     

Univalent Gallium Complexes of Simple and ansa‐Arene Ligands: Effects on the Polymerization of Isobutylene

Using [Ga(C₆H₅F)₂]⁺[Al(OR^F)₄]^?( 1 ) (R^F=C(CF₃)₃) as starting material, we isolated bis‐ and tris‐η⁶‐coordinated gallium(I) arene complex salts of p‐xylene (1,4‐Me₂C₆H₄), hexamethylbenzene (C₆Me₆), diphenylethane (PhC₂H₄Ph), and m‐terphenyl (1,3‐Ph₂C₆H₄): [Ga(1,4‐Me₂C₆H₄)_2.5]⁺ ( 2⁺ ), [Ga(C₆Me₆)₂]⁺ ( 3⁺ ), [Ga(PhC₂H₄Ph)]⁺ ( 4⁺ ) and [(C₆H₅F)Ga(μ‐1,3‐Ph₂C₆H₄)₂Ga(C₆H₅F)]²⁺ ( 5²⁺ ). 4⁺ is the first structurally characterized ansa‐like bent sandwich chelate of univalent gallium and 5²⁺ the first binuclear gallium(I) complex without a Ga?Ga bond. Beyond confirming the structural findings by multinuclear NMR spectroscopic investigations and density functional calculations (RI‐BP86/SV(P) level), [Ga(PhC₂H₄Ph)]⁺[Al(OR^F)₄]^?( 4 ) and [(C₆H₅F)Ga(μ‐1,3‐Ph₂C₆H₄)₂Ga(C₆H₅F)]²⁺{[Al(OR^F)₄] ^?}₂ ( 5 ), featuring ansa‐arene ligands, were tested as catalysts for the synthesis of highly reactive polyisobutylene (HR‐PIB). In comparison to the recently published 1 and the [Ga(1,3,5‐Me₃C₆H₃)₂]⁺[Al(OR^F)₄]^? salt ( 6 ) (1,3,5‐Me₃C₆H₃=mesitylene), 4 and 5 gave slightly reduced reactivities. This allowed for favorably increased polymerization temperatures of up to +15 °C, while yielding HR‐PIB with high contents of terminal olefinic double bonds (α‐contents=84–93 %), low molecular weights (M_n=1000–3000 g mol^?1) and good monomer conversions (up to 83 % in two hours). While the chelate complexes delivered more favorable results than 1 and 6 , the reaction kinetics resembled and thus concurred with the recently proposed coordinative polymerization mechanism.     

The Arene‐Stabilized η5‐Pentamethylcyclopentadienyl Arsenic Dication [(η5‐Cp*)As(toluene)]2+

Double chloride abstraction of Cp*AsCl₂ gives the dicationic arsenic species [(η⁵‐Cp*)As(tol)][B(C₆F₅)₄]₂ ( 2 ) (tol=toluene). This species is shown to exhibit Lewis super acidity by the Gutmann–Beckett test and by fluoride abstraction from [NBu₄][SbF₆]. Species 2 participates in the FLP activation of THF affording [(η²‐Cp*)AsO(CH₂)₄(THF)][B(C₆F₅)₄]₂ ( 5 ). The reaction of 2 with PMe₃ or dppe generates [(Me₃P)₂As][B(C₆F₅)₄] ( 6 ) and [(σ‐Cp*)PMe₃][B(C₆F₅)₄] ( 7 ), or [(dppe)As][B(C₆F₅)₄] ( 8 ) and [(dppe)(σ‐Cp*)₂][B(C₆F₅)₄]₂ ( 9 ), respectively, through a facile cleavage of C?As bonds, thus showcasing unusual reactivity of this unique As‐containing compound.     

Selenoquinones Stabilized by Ruthenium(II) Arene Complexes: Synthesis,Structure, and Cytotoxicity

A new series of monoselenoquinone and diselenoquinone π complexes, [(η⁶‐p‐cymene)Ru(η⁴‐C₆R₄SeE)] (R=H, E=Se ( 6 ); R=CH₃, E=Se ( 7 ); R=H, E=O ( 8 )), as well as selenolate π complexes [(η⁶‐p‐cymene)Ru(η⁵‐C₆H₃R₂Se)][SbF₆] (R=H ( 9 ); R=CH₃ ( 10 )), stabilized by arene ruthenium moieties were prepared in good yields through nucleophilic substitution reactions from dichlorinated‐arene and hydroxymonochlorinated‐arene ruthenium complexes [(η⁶‐p‐cymene)Ru(C₆R₄XCl)][SbF₆]₂ (R=H, X=Cl ( 1 ); R=CH₃, X=Cl ( 2 ); R=H, X=OH ( 3 )) as well as the monochlorinated π complexes [(η⁶‐p‐cymene)Ru(η⁵‐C₆H₃R₂Cl)][SbF₆]₂ (R=H ( 4 ); R=CH₃ ( 5 )). The X‐ray crystallographic structures of two of the compounds, [(η⁶‐p‐cymene)Ru(η⁴‐C₆Me₄Se₂)] ( 7 ) and [(η⁶‐p‐cymene)Ru(η⁴‐C₆H₄SeO)] ( 8 ), were determined. The structures confirm the identity of the target compounds and ascertain the coordination mode of these unprecedented ruthenium π complexes of selenoquinones. Furthermore, these new compounds display relevant cytotoxic properties towards human ovarian cancer cells.     

Ni(II) and Pd(II) complexes bearing benzocyclohexane–ketoarylimine for copolymerization of norbornene with 5‐norbornene‐2‐carboxylic ester

A serial of late transition metal complexes, which bearing Benzocyclohexane–ketoarylimine ligand and named as Mt(benzocyclohexane–ketoarylimino)₂ {Mt(bchkai)₂: Mt=Ni or Pd; bchkai=C₁₀H₈(O)CN(Ar)CH₃; Ar=naphthyl or fluoryl}, have been synthesized and characterized. The molecular structures of the ligands and nickel complex have been confirmed by X‐ray single‐crystal analyses. The nickel complexes exhibited very high activity up to 2.7 × 10⁵ g_polymer/mol_Ni·h and palladium complexes showed high activity up to 2.3 × 10⁵ g_polymer/mol_Pd·h for norbornene (NB) homo‐polymerization with tris(pentafluorophenyl)borane as cocatalyst. The four complexes were effective for copolymerization of NB and 5‐norbornene‐2‐carboxylic acid methyl ester (NB‐COOCH₃) in relatively high activities (0.1–2.4 × 10⁵ g_polymer/mol_Mt·h) and produced the addition‐type copolymers with relatively high molecular weights (0.5 × 10⁵–1.2 × 10⁵ g/mol) as well as narrow molecular weight distributions (PDI < 2 for all polymers). Influences of the metals and comonomer feed content on the polymerization activity as well as on the incorporation rates (20.9–42.6%) were investigated. The achieved NB/NB‐COOCH₃ copolymers were confirmed to be noncrystalline, exhibited good thermal stability (T_d > 400°C) and showed good solubility in common organic solvents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Insight into Oxide‐Bridged Heterobimetallic Al/Zr Olefin Polymerization Catalysts

Reaction of (TBBP)AlMe ? THF with [Cp*₂Zr(Me)OH] gave [(TBBP)Al(THF)?O?Zr(Me)Cp*₂] (TBBP=3,3’,5,5’‐tetra‐tBu‐2,2'‐biphenolato). Reaction of [DIPPnacnacAl(Me)?O?Zr(Me)Cp₂] with [PhMe₂NH]⁺[B(C₆F₅)₄]^? gave a cationic Al/Zr complex that could be structurally characterized as its THF adduct [(DIPPnacnac)Al(Me)?O?Zr(THF)Cp₂]⁺[B(C₆F₅)₄]^? (DIPPnacnac=HC[(Me)C=N(2,6‐iPr₂?C₆H₃)]₂). The first complex polymerizes ethene in the presence of an alkylaluminum scavenger but in the absence of methylalumoxane (MAO). The adduct cation is inactive under these conditions. Theoretical calculations show very high energy barriers (ΔG=40–47 kcal mol^?1) for ethene insertion with a bridged AlOZr catalyst. This is due to an unfavorable six‐membered‐ring transition state, in which the methyl group bridges the metal and ethene with an obtuse metal‐Me‐C angle that prevents synchronized bond‐breaking and making. A more‐likely pathway is dissociation of the Al‐O‐Zr complex into an aluminate and the active polymerization catalyst [Cp*₂ZrMe]⁺.     

Synthesis and application of molybdenum (III) complexes bearing weakly coordinating anions as catalysts of isobutylene polymerization

Acetonitrile ligated molybdenum (III) complexes of the structure [MoCl(NCCH₃)₅]²⁺ bearing different weakly coordinating anions [B(C₆F₅)₄]^? (WCA a), [B{C₆H₃(m‐CF₃)₂}₄]^? (WCA b) and [(C₆F₅)₃B‐C₃H₃N₂‐B(C₆F₅)₃]^? (WCA c) were applied as homogeneous catalysts of the polymerization of isobutylene. High monomer conversions were obtained in short reaction times (<30 min). The molecular weight of the resulting polyisobutylene is nearly independent of parameters such as temperature, solvent, monomer concentration, but is strongly influenced by the type of WCA and by chain transfer reactions which were observed in these systems. Highly reactive low molecular weight polyisobutylenes (M_n < 2000 g/mol) were obtained with a high content of exo double bond end groups as shown by ¹H NMR analysis. Furthermore, experiments were performed to reduce the isomerization of these exo end groups into other internal double bonds by varying the polymerization parameters. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3775–3786, 2010